Shared Services 9.3.1 only runs as a batch, will not start as a service.

I am attempting to install Sys 9.3.1 and have run into an interesting problem. I have completed the installation, but cannot get Shared Services to start as a windows service.
I can start SS from the start menu, then browse to the login page and log in without issues. When I open the MMC for Services and attempt to start SS, it will not.
I am using Weblogic 9.2.3 and have watched the process via the Weblogic Administration Console. When run from the start menu, it quickly changes status from "Starting" to "Running" and functions ok. When attempting to start from Services it hangs up in the "Starting" phase then after a few minutes, changes to "Force_Shutdown", then "Shutdown".
The OpenLDAP service seems to run fine. Both services were installed to run using a local system account. I used the automated deployment option during the install and completed the configuration with the utility provided without any errors.
Any recommendations or advice would be much appreciated.
G.

Hi
Did you have a look at the log files? That should tell you what the problem might be.
Regards,
Amol

Similar Messages

Only a gray screen, cmputer will not start up

Only a gray screen, computer will not start up, a few weeks ago my computer crashed had to do a erase and install since everything was clean I purchased OS 10.4 bundle since I have an ibook too. everything has been working fine for about 7 days now, but now have just a gray screen. I booted up from the OS10.4 disk opened the disk utility and this is what it said.
Verifying volume
volume check failed
1 HFS volume checked
volume needs repair
next I ran repair and..
Volume check failed
Error: the underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error

Had posted two questions for same problem and the other one was answered and so this one is answerd too.

Firefox will not start up, there is no other instance running, and profile manager will not start either.

I try to start Firefox, but it just doesn't start. I have tried every way of starting it I can think of. Nothing that appears Firefox related shows up in the task manager process tab. I don't remember having any kind of crash. There is no error message. (If I click on a URL in an email or something, I get a "general failure" message -- I assume that's because my system is supposed to open FF and can't.)
I rebooted, and tried uninstalling and reinstalling. One of the help thingies suggested using profile manager to change my profile, but it looks like profile manager is part of Firefox, and it won't run.

Make sure that Firefox is completely closed, when you try to run the profile manager.
Can you try to get your crash report ID (without opening Firefox) using the instructions at https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it#Getting_your_crash_report

After running chgiphost O4CJ home will not start

opmn id=reddev04.lon.domroot.com:6200
1 of 2 processes started.
ias-instance id=OASDEV3
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=73472950,pid=5213)
failed to start a managed process after the maximum retry limit
Log:
/home/orabpel/product/10.1.3/OracleAS_1/opmn/logs/OC4J~home~default_group~1
This is the error - any ideas
06/08/18 15:54:21 Start process
06/08/18 15:54:26 *** (SEVERE) Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/home/orabpel/product/10.1.3/OracleAS_1/j2ee/home/config/jms.xml]
06/08/18 15:54:30 WARNING: Application.setConfig Application: default is in failed state as initialization failedjava.lang.InstantiationException: Error initializing ejb-modules: Resource exception(OracleASjms) for MessageDrivenBean event during endpoint activation: failure looking up ConnectionFactoryJndiName:jms/XAQueueConnectionFactory: javax.resource.spi.ResourceAdapterInternalException: Looking up jms/XAQueueConnectionFactory: javax.naming.NameNotFoundException: jms/XAQueueConnectionFactory not found
18-Aug-2006 15:54:30 com.evermind.server.Application setConfig
WARNING: Application: default is in failed state as initialization failedjava.lang.InstantiationException: Error initializing ejb-modules: Resource exception(OracleASjms) for MessageDrivenBean event during endpoint activation: failure looking up ConnectionFactoryJndiName:jms/XAQueueConnectionFactory: javax.resource.spi.ResourceAdapterInternalException: Looking up jms/XAQueueConnectionFactory: javax.naming.NameNotFoundException: jms/XAQueueConnectionFactory not found
06/08/18 15:54:30 Error initializing server: Error initializing ejb-modules: Resource exception(OracleASjms) for MessageDrivenBean event during endpoint activation: failure looking up ConnectionFactoryJndiName:jms/XAQueueConnectionFactory: javax.resource.spi.ResourceAdapterInternalException: Looking up jms/XAQueueConnectionFactory: javax.naming.NameNotFoundException: jms/XAQueueConnectionFactory not found
06/08/18 15:54:33 Fatal error: server exiting

Can you provide the exact steps prior to this error? Trying to reproduce the problem inhouse.
Pavna

I can't get home sharing to turn on on my computers. I have a PC running windows XP that has a large library on it that I want to access from a newer windows 7 PC. I have turned home sharing on in both, same apple ID. I just will not come up. Any ideas?

I can't get home sharing to turn on on my computers. I have a PC running windows XP that has a large library on it that I want to access from a newer windows 7 PC. I have turned home sharing on in both, same apple ID. I just will not come up. Any ideas?

Ugh, disregard.. it magically started working -_-

When updating iTunes to 11.4 I get the following error: "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

When updating iTunes to 11.4 I get the following error: "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

My iphone 4S running IOS8.1.2 will not allow me to enable Location Services. Wherever I check it is "grayed out". advice?

my iPhone 4S running IOS8.1.2 will not allow me to enable Location Services. Wherever I check it is "grayed out". advice?

Hey AUABB,
Thanks for visiting Apple Support Communities.
If you're not able to enable Location Services on your iPhone 4s, first restart the device:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Next, try resetting the location settings on the device to factory default:
If you would like to reset all of your location settings to the factory default, go to Settings > General > Reset and tap Reset Location & Privacy. When your location and privacy settings are reset, apps will stop using your location until you grant them permission.
Understanding privacy and Location Services on iPhone, iPad, and iPod touch with iOS 8 - Apple Support
If the Location Services option is still grayed out, you may need to back up your iPhone and restore the iOS software using iTunes:
Use iTunes to restore your iOS device to factory settings - Apple Support
All the best,
Jeremy

Vista SP1 - CF Service will not start

Running Vista Business. Life was good, I was productive! (CF 8 btw).
After installing Vista SP1, CF service will not start. Digging a little deeper, turns out JRUN can't fire off "coldfusion", one of the servers listed. Here is the error:
04/06 11:49:20 error Failed to create new connection
java.net.SocketException: select failed
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:384)
at java.net.ServerSocket.implAccept(ServerSocket.java:453)
at java.net.ServerSocket.accept(ServerSocket.java:421)
at jrun.jms.core.kernel.mipc.MultiplexConnectionServer.run(MultiplexConnectionServer.java:15 4)
Some digging turned up the possiblity that the jndi.properties file isn't being read. Changed permissions on it to let everyone in. Heck, you guys can probably get at it right now form where you are its so open!
More digging, turns out Windows Firewall like to block port 2930, which is apparently used for internal communication with jndi settings or some such. Opened that up. Found evidence of further internal communication on port 900, opened that up to.
Found this very useful and a bit scary info about missing DLLs and so forth:
http://www.communitymx.com/content/article.cfm?page=6&cid=224AA
Found reference to the updated Vista TCP/IP stack being a culprit in some cases, which often seemed to come down to, get this, a new host file entry for localhost: ::1 localhost. Commented that out, still no joy.
Tried reinstalling. Still no go.
Pretty much exhausted all possibilities I was able to think of or find info about.
Any ideas or similar experiences? Or, failing that, the address of a tall building to jump off? Thanks!

Read the manual?!?! No way, never! That would be like... stopping at a gas station to ask for directions!
But seriously, I did poke around there a bit. I do tend to forget that there is more to there is more there than the language reference.
Never been stuck like this though. Probably done over 100 installs dating back to CF4 on just about all windows flavors but have never had to dig in to the guts of the underlying Java like this.
Thinking it has to be something unique to this machine; I have done other Vista installs of CF8 with only minimal issues (typically having to set the service to run under an account that has permissions, maybe even set jrun.exe and jrunsvc.exe to execute under an admin account, but thats about it). Unfortunately, partially because of the environment we operate in, a fresh workstation install is a good day and half to two day ordeal.
Help me Obi Wan, you're my only hope!

Coldfusion 8 service will not start. Server log is ending with "Starting license..." (Emergency)

Our server has gone down and the Coldfusion 8 service will not start. There is no information in any of the logs for anything today since its gone down. Ive checked the root logs directory as well as the runtime logs directory.
The server.log is the only file being updated and it shows "Starting logging..." and then "Starting license..." and hangs. The service does not start and the log gets nothing more after this point. Memory continues to go up slowly, we've increased the start timeout tremendously with no effect. There is little to no CPU usage.
Our server is licensed and has never had this problem before. It is the standard version.
Our server is completely down and we are losing clients. From what we can tell a windows update occurred, which we have since removed in case it was the issue, and when the server restarted CF did not come back. We have been working on this for hours with no results.
Please help and let me know anything you may need which will help diagnose our issue.
Thanks

So that others who see this know the solution.
I started Coldfusion from the command line: c:\Coldfusion8\runtime\bin\jrun -start coldfusion. This brought up all the commands as it worked through them. From that we found that CF was looking for license.properties in the C:\Coldfusion8\runtime\lib folder. We found a copy in the C:\Coldfusion8\lib folder. For now we've left it running under my account and then after hours are going to try and see if the service will run now that we've copied that properties file to the other direcory.
Probably simple to everyone on here but was new and odd to us. Wanted to put what we found out here in case it happens to anyone else.

Tomcat service will not start with JRockit 8.0

We are trying to use JRockit with Tomcat 4.0.1. It runs great as a console app
but when we try to run it as a service it will not start. Has anyone had any luck
with this.

Hi Bob!
You can use the jk_nt_service descibed and downloadble at
http://members.ozemail.com.au/~lampante/howto/tomcat/iisnt/
To make this work on JRockit you have to follow these instrcutions.
But also do this:
Make sure that you environment variables are set up correctly. Make sure
that
you have set your JAVA_HOME environment variable correctly, and that that
"%JAVA_HOME%\bin" is available in your PATH environment variable before any
other directory where any version of java.exe may exist. When running
applications as Windows services it is crucial that you set these
environment
variables system wide. To do this open
Start->Settings->Control Panel->System
and select the Advanced tab. Click on the "Environment Variables." button.
To
set system wide environment variables you must edit in the lower part of
this
dialog, i.e. the part called System variables.
When using jk_nt_service the Tomcat startup is defined in
%CATALINA_HOME%\conf\jk\wrapper.properties
Make sure that you set the three properties wrapper.tomcat_home,
wrapper.java_home and wrapper.cmd_line are set accordingly.
wrapper.tomcat_home must be set with the installation directory of tomcat
wrapper.java_home must be set to the same value as the JAVA_HOME environment
variable.
The property wrapper.cmd_line defines the startup command.
At the time of writing, this property should be set to
wrapper.cmd_line=$(wrapper.javabin) -Xnohup
-Djava.security.policy=="$(wrapper.tomcat_policy)"
-Dtomcat.home="$(wrapper.tomcat_home)" -classpath $(wrapper.class_path)
$(wrapper.startup_class) -config $(wrapper.server_xml) start
for JRockit. Normally this command includes a non-standard option to stop
the
JVM from shutting down the process when a user logs off. For JRockit this
non-standard option is -Xnohup, for the Sun JVM it is -Xrs.
/ Sten
"Bob Siragusa" <[email protected]> wrote in message
news:[email protected]...
Thanks for your reply Sten.
We slightly modified tomcat.exe to install our app as a service.
Really the only changes we made were to the name of the service and weadded a
few application parameters with -D. We still use the same startup andshutdown
hooks to the Bootstrap jar. This is where we think there may be a
problem.
>>
I am now trying to use SilverEgg Technologies open source Java ServiceWrapper
but have not progressed very far yet.
Bob
"Sten Garmark" <[email protected]> wrote:
Hi Bob!
Are we talking Tomcat controlled by a Windows Service? If so, how are
you
trying to make this happen?
Can you please point me to the documentation of this and the win32
wrapper
service that you are using?
I would like to be able to re-produce your problem.
/ Sten
"Bob Siragusa" <[email protected]> wrote in message
news:[email protected]...
We are trying to use JRockit with Tomcat 4.0.1. It runs great as aconsole
app
but when we try to run it as a service it will not start. Has anyonehad
any luck
with this.

Netlogon and Workstation Service will not start.

I have a Windows 2012 R2 Standard guest installed on the HyperV Machine running windows 2012 R2 with SCVMM2012 R2.
When I install the server the Workstation and Netlogon service will not start. I have only made a clean installation with no extras. I keep getting this error in th system event log:
The Workstation Service depends on the Browser Support Driver service which failed to start because of the following error;
Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be a malicious software from an unknown source.
Event ID: 7001
I have searched forums and I have not been able to locate a solution that worked for me.
I have tried to install from another media but the result is the same every time.
Have anyone some suggestion to what I can do to get this working?
Thanks
Jacob
______________________________________________ /Jacob

Hi Jacob,
In addition to Tim’s suggestion, although the following article focuses on the SBS 2008, we can refer to the method it provides to see whether it can be helpful for us to
fix the issue.
Error: "The Workstation service depends on the bowser service which failed to start because of the following error: Windows cannot verify the digital signature for this file."
when you try to start Workstation service on SBS 2008
http://support.microsoft.com/kb/2568759/en-us
Hope it helps.
Best regards,
Frank Shen

Windows could not start the Server service on local computer Error 193:0xc1

Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
Jose

Hi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

My i pod 160g says it has only 470 mb free and will not sync it only has 20 songs on it it also refuses to reset

my ipod 160g says it only has473 mb free and only 20 songs on it
will not sync or reset

Hallelujah!
First I reset the iPod Classic by simultaneously pressing <menu> and <select>. As soon as the Apple logo appeared I pressed simultaneously <select> and <pause-play>. That enabled disc use. From thereon I connected the iPod to an old desktop running Windows XP and iTunes version 8.n.n. It allowed me to restore the iPod but syncing proved erratic. It would stop after say 30-40 songs.
So I bravely connected it to my usual desktop running Vista and iTunes version 10.5.3.3 and behold, It restored the iPod and synced the entire music library just as before!
Needless to say I shan't be syncing this little baby again. There is enough music on it to last me on a long flight to the end of the world and back!
Thanks for your help and I hope others may like to try this method.
Now a secret - I called the Apple help line and a nice lady from the Portugal call centre told me to press the buttons in that sequence to get it going as a disk. She has also emailed me some helpful articles but I did not need to read them.
Thank you Apple!

Firefox will not open. Process runs, but browser window will not open.

I am unable to get the Firefox browser window to launch. The application will attempt to open, but the browser window will not appear. Task manager indicates that the process is running, it just will not launch the window. No amount of restarts or reboots will make a difference. The strange thing about this is that Firefox has never run. This is a new computer and this issue has been a problem since it was first plugged in.
Troubleshooting steps attempted thus far:
1) Attempted to open in safe mode - will not open
2) Attempted to run in administrator mode- will not open
3) Completely uninstalled application, including profile info and reinstalled
4) Uninstalled known conflicts - Skype 4 (do not have Norton)
5) Even though issues since new, I ran a virus scan just in case-nothing
6) Uninstalled Chrome which I installed after originally being unsuccesful at getting FF to install (I uninstalled it before I began all of these troubleshooting steps as I have heard of conflicts)
I am now at a loss and willing to try any other steps that you guys can suggest.
Computer is running Windows 7 pro 64 bit. Running McAffee virus software. There are three identical computers in my office, purchased at exactly the same time with the same configuration. Mine is the only one that will not run firefox. Sadness. Please help, pleeeease...

Win 7 with iTunes installed - I was also having problems with that.
"netsh winsock reset" at the command prompt resolved all issues and Firefox launched normally.
Check to see if Winsock is corrupted. May prevent FF from communicating with the web and consequently fails to launch properly - for my situation was not a firewall or antivirus block!
http://support.microsoft.com/kb/936211#LetMeFixItMyselfAlways
Click Start, and in Start Search, type cmd.
Right-click the cmd entry that appears in the search results, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
At the command prompt, type the following, and then press ENTER:
netsh winsock reset
Then, you should see the following message:
Successfully reset the Winsock Catalog. You must restart the computer in order to complete the reset.
Restart the computer.
Note If you receive an “Access Denied” error message instead of the message that is mentioned in step 3, the command prompt was not correctly elevated. In this case, close the Command Prompt window, and repeat steps 1 through 3. Make sure that you correctly implement step 2.

Windows listener service will not start automatically

I just installed 11.2.0.3 Standard Edition One and when I reboot the server, the listener service is not started. The service is set to start Automatically. I have to login, open services and then push start.
The oraceServiceSId does start automatically,
The listerner service does not start automatically,
The dbconsole service does not start automatically,
The processManger1 service (from middleware) does not start automatically
This is Windows 7 64 bit.
Any ideas?
Edited by: brian.mcginity on Dec 10, 2011 11:25 AM

I found where the services logs are recorded in the event viewer. Funny thing just happened, I was just about to do another reboot so I could check the logs when I noticed there were window updates in q.
So after running the updates, the os requested to reboot . For the first time, the services started automatically.
These are the updates which fixes the probem:
Security Update for Windows 7 for x64-based Systems (KB2639417)
Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2618444)
Security Update for Windows 7 for x64-based Systems (KB2620712)
Cumulative Security Update for ActiveX Killbits for Windows 7 for x64-based Systems (KB2618451)
Edited by: brian.mcginity on Dec 13, 2011 9:52 PM
Edited by: brian.mcginity on Dec 13, 2011 9:53 PM

Shared Services 9.3.1 only runs as a batch, will not start as a service.

Similar Messages

Maybe you are looking for