Shared services services  cannot see in services

hi
i was tring to change the password for shared servies
and i was able to do it
then
i deplyoed it succesfully but then after i cant see the shared services in services console
strange thing is i can open in my local host but cant open in user machine ( the shared servives)
Can any 1 tell me how to bring back the shared services back in services console and even in user machine

Hi,
In AAS, under HBR node, right click Administration and refresh user list.
You could also try to refresh the security from shared services.
HTH
Seb

Similar Messages

  • XI Post Installation: Cannot see Business Service Test

    Hello Everybody,
    I have installed XI.
    At the stage, Checking the Installation Part 2:
    I have to create a new Business Service: Test
    Save the service and then Activate the Change List.
    I did all of that, but when I enter transaction SXI_CACHE on the ABAP side and then double click SERVICES, I cannot see the Server: Test .
    Does anyone know why this Test Business Service does not appear ?
    Also, I have not yet installed the SLD, can I have an XI system without an SLD ? If I want to install the SLD, can I do this as a separate step from SAPINST or can it only be done as part of the XI installation ?
    Thanks,
    Petr.

    Hello,
    I have checked in the Change List TAB and it is empty, if I change the search to include closed then I can see my Business Service.
    When I open SXI_CACHE on the ABAP side the Services are empty and if I try to clear the SXI_CACHE with F6 or Shift-F6 I get this error:
    Unable to refresh cache contents
    Error during last attempted cache refresh
    Error ID Business System
    LCR_GET_OWN_BUSINESS_SYSTEM_SLD_API_EXCEPTION
    Could this be caused be me not yet installing the SLD, and as I don't yet have an SLD I didn't to the SLD related parts of the XI post installation tasks ?
    Thanks,
    Petr.

  • Cannot see Photoshop Services in Bridge

    I do not see Photoshop Services item under my Bridge Tools menu. I am running Bridge / PS CS4. I did the recommended install and all startup scripts are enabled. I also do not see the Photoshop automate tasks like Contact sheet II that I used to have under CS3 (I have installed the extra plugins from the CS4 disk). I have a MacBook Pro and G4 MDD desktop and have the same problem on both.
    What am I doing wrong? (I tried searching forums and support, and am sorry if I missed this).
    Thanks!
    Mike...

    Can't tell you about Photoshop Services, don't know that but for the contact sheet they replaced it with the Adobe Output Module.
    this one you can reach trough using the workspace Output in the presets under workspaces or using the icon of a sheet of paper with an arrow (this is the right icon in the row top left on the bridge window.
    If you can't achieve what you want with the output module you can always look at the goodies CD from the original install package for CS4, inhere you will find the Contact sheet 2 scripts for both PS and Bridge and a manual for installation :-)

  • Web service task: Cannot see the expected list of methods

    Problem in using web service task in SSIS
    I added web service in web service task but it wont retrieves me expected method in input. Can anyone please help me ASAP

    see if you've configured it correctly
    http://www.bidn.com/blogs/BillBrannen/bidn-blog/619/ssis-web-service-task-step-by-step
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Cannot see BITS service in Windows server 2008 R2

    Helo experts,
    I'm trying to enable BITS service in Windows Srv 2008 R2, where my SCCM 2012 primary server installed.
    But the BITS service is not appearing in IIS7.
    Want to make sure the service is running before upgrading to sccm 2012 SP1
    thanks in advance, if someone can show the way..
    Reg,
    Chandri

    Have you added the BITS feature using Server Manager? You must have. It was a prerequisite for SCCM 2012 RTM.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Cannot see essbase application in shared serivce after upgradation

    hi i am trying to upgrade hyperion 11.1.2.1 to 11.1.2.3 with maintenance  release . after the configuration with previous database and starting all the serives, when i loging to shared service i cannot see my application in essbase cluster 1 . i tried to register  option in the essbase but it say registration is not allowed.

    Is it just one application you cannot, can you see other ones from the previous release.
    What happens if you create a new application
    Check the essbase logs and the SharedServices_Security_Client log - Installation and Configuration Troubleshooting Guide
    Cheers
    John

  • Cannot see Shared Folders from xmlpserver - OBIEE 11g (11.1.1.5)

    Hi All,
    I have got a an issue with the permissions i.e. I can log in to http://hostname:7001/analytics and open a report that is stored in "Shared Folders" but if I log in to http//hostname:7001/xmlpserver with same user I cannot see Shared Folders.
    How to fix this issue? Thanks in advance.

    Thanks for your quick response Kishore.
    The user is the Admin user. This user is part of XMLP_ADMIN group as well.
    I can create a file from http://hostname:7001/xmlpserver in the shared folders but cannot see. I can see the same file from http://hostname:7001/analytics. any idea?

  • I cannot see photos in iCloud Photo Sharing

    I have shared album on iCloud, but invited members can only see photos from the point in time they accepted the invitation.
    For example:
    Day 1: Album created, Photo A, B, C added.
    Day 2: Person X added. Cannot see photo A, B or C.
    Day 3: Person X adds Photo D,E,F. Person Y added.
    Day 4: Person X cannot see photo A, B or C, but can see Photo D,E,F. Person Y cannot see any photos.
    Day 5: Person Z added. Person X adds Photo G,H,J. Person Y adds photos K,L,M.
    Day 6: Person X can see photos D - M. Person Y can see photos G - M. Person Z cannot see any photos.
    Hope that helps? Basically once  a person is added to a shared album, they cannot see any of the previous photos. Making the shared album a bit pointless if it is holiday photos? I'd have to add the people first then add the photos, and if someone has gone out to buy an iPad for this purpose, its a bit unfortunate now that they can't see the photos because they didn't have an iOS at the time the album was cr

    You're welcome

  • I have a Photoshop CC subscription but I cannot see it in "My products and services"

    I have a Photoshop CC subscription but I cannot see it in "My products and services".
    I tried to follow http://helpx.adobe.com/x-productkb/global/find-serial-number.html , but that DOES NOT HELP.
    Thanks.

    Hi ytwong,
    I am Email ing you an link which you have already recieved in mail when your was placed & approved. By using that link you got in the mail or that I will Email you, you will be guided appropriately.
    You have an active subscription.
    Kind Regards,
    Rajshree

  • Shared Services and cannot open User Directories Tree

    Hello,
    I have an issue with Shared Services 931. My OpenLDAP and Shared Services will start fine. I am using TomCat as deployment of the service.
    When i login as admin, i goto the User Directories and try to expand (click on the + sign) and it says loading. Then i checked the logs and i see this in there.
    "Unable to get css.xml file or file maybe read only". I check the file css.xml and it is not read only. I have even configured using another Oracle Schema, but still no luck.
    Has anyone seen this before ?
    Thanks,
    Azmat Bhatti

    Hi,
    Have you tried rebooting you shared services server to see if it removes the lock?
    What happens if you start shared services as a foreground app instead of starting it as a Windows service? Do you get further info in terms of errors?
    Seb

  • Exchange 2013 EAC Service Pack 1 New mailbox cannot see all OUs when selecting Browse with "Exchange Organization Management " permissions

    Single forest 2 Domains. When I go to create a new mailbox in the Exchange Admin  Centre and "Browse" the Organizational Unit. I can only see a few OU in the Parent Domain and most in the Child Domain. I have tried "expand All" and
    cannot see anywhere in the EAC to set a "Recipient Scope". The account I am using has "Exchange Organization Management " rights and is a Domain Admin as well.
    The Exchange servers are members of the Root Domain.
    In the "Select an Organizational Unit" menu there is a message "There are more results available than are currently displayed". I have tried searching as well and cannot find OUs that I should be able to.
    All the servers have had Exchange 2013 Service pack 1 installed.
    Any suggestions?
    Regards,
    John

    Changing that setting resulted in the ECP site being inaccessible. So I changed it back
    I have copied the user accounts to test with.
    Originals:
    User1: can see OU's when making a new user through the ECP (access: domain, exchange recipient admin)
    User2: cannot. (Enterprise, domain, exchange, schema admin)
    Test users:
    test user1: copied from user 1, cannot see any OU's when creating a new user.
    test user2: copied from user 2, can see all OU's when creating a new user.

  • ITunes reinstalled on win 7x64 but still cannot enable bonjour services for home sharing any ideas

    i am trying to reenable home sharing - but bonjour services will not reenable in services although it is stating it has - tried to uninstall and reinstall all apple products/services but still no joy
    in preferences -  the Bonjour Services has bee ndisables - bonjour is required to share music with others please re-enable the services to use this feature.
    in services is shows started
    Any ideas
    Dont know if this is also related.  But I couldnt get my iphone to sync anymore so it is now synced to laptop soon to be macbook and my apple TV is also an issue and wont work
    Not having much luck here
    Thanks in advance Del

    Sorry for reply to post but I have a new development.  I can get it to work from my laptop if it's connected wireless but as soon as I hard wire it to the router Home share is gone.  Desktop is of course hard wired to the router to get the Gigabit upload speed so I've at least narrowed it down to the hard wiring upload.

  • Job for httpd.service failed. See 'systemctl status httpd.service' and

    Hello,
    I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
    sudo systemctl start httpd
    Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
    systemctl status httpd.service
    ● httpd.service - Apache Web Server
    Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
    Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
    Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
    Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
    Main PID: 2060 (code=exited, status=0/SUCCESS)
    août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
    août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
    août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
    août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
    Hint: Some lines were ellipsized, use -l to show in full.
    cat /etc/httpd/conf/httpd.conf
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
    # will be interpreted as '/logs/access_log'.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used. If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    ServerRoot "/srv/http"
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    # Mutex default:/run/httpd
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    #LoadModule authz_dbd_module modules/mod_authz_dbd.so
    LoadModule authz_core_module modules/mod_authz_core.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_form_module modules/mod_auth_form.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule allowmethods_module modules/mod_allowmethods.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cache_disk_module modules/mod_cache_disk.so
    #LoadModule cache_socache_module modules/mod_cache_socache.so
    #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    #LoadModule socache_dbm_module modules/mod_socache_dbm.so
    #LoadModule socache_memcache_module modules/mod_socache_memcache.so
    #LoadModule watchdog_module modules/mod_watchdog.so
    #LoadModule macro_module modules/mod_macro.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    #LoadModule echo_module modules/mod_echo.so
    #LoadModule buffer_module modules/mod_buffer.so
    #LoadModule data_module modules/mod_data.so
    #LoadModule ratelimit_module modules/mod_ratelimit.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule request_module modules/mod_request.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    #LoadModule reflector_module modules/mod_reflector.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule sed_module modules/mod_sed.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule deflate_module modules/mod_deflate.so
    #LoadModule xml2enc_module modules/mod_xml2enc.so
    #LoadModule proxy_html_module modules/mod_proxy_html.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_debug_module modules/mod_log_debug.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule logio_module modules/mod_logio.so
    #LoadModule lua_module modules/mod_lua.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    #LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    #LoadModule remoteip_module modules/mod_remoteip.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule proxy_express_module modules/mod_proxy_express.so
    #LoadModule session_module modules/mod_session.so
    #LoadModule session_cookie_module modules/mod_session_cookie.so
    #LoadModule session_crypto_module modules/mod_session_crypto.so
    #LoadModule session_dbd_module modules/mod_session_dbd.so
    LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
    #LoadModule ssl_module modules/mod_ssl.so
    #LoadModule dialup_module modules/mod_dialup.so
    LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    LoadModule mpm_event_module modules/mod_mpm_event.so
    LoadModule unixd_module modules/mod_unixd.so
    #LoadModule heartbeat_module modules/mod_heartbeat.so
    #LoadModule heartmonitor_module modules/mod_heartmonitor.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    #LoadModule suexec_module modules/mod_suexec.so
    #LoadModule cgid_module modules/mod_cgid.so
    #LoadModule cgi_module modules/mod_cgi.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    #LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    #Load php5 module
    LoadModule php5_module modules/libphp5.so
    <IfModule unixd_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other
    # <Directory> blocks below.
    <Directory />
    AllowOverride none
    Require all denied
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # AllowOverride FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Require all granted
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ".ht*">
    Require all denied
    </Files>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
    </Directory>
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall may be used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #EnableMMAP off
    #EnableSendfile on
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # PHP settings
    Include conf/extra/php5_module.conf
    # Configure mod_proxy_html to understand HTML4/XHTML1
    <IfModule proxy_html_module>
    Include conf/extra/proxy-html.conf
    </IfModule>
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #<IfModule setenvif_module>
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #</IfModule>
    #<IfModule headers_module>
    #RequestHeader unset DNT env=bad_DNT
    #</IfModule>
    Thanks, sorry my english is bad .
    Last edited by Creaprog (2014-08-25 10:25:17)

    I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
    This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
    I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
    Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

  • Not able to see Enterprise Service hosted at SDN

    Dear All
    I want to access the Enterprise Service that are available at SDN and for that I created two proxies in Visual Admin.
    I am trying to call those services in my Visual Composer. I am able to see the services in the Group.
    But not able to see the required Enterprise Service.
    When I click the + sign nothing comes under that group.
    I am using VC 7.0
    Can any body help me.
    Thanks
    Vivek
    Hello Everybody
    The ES available at SDN cannot be accessed outside SAP network because if we see the XML of the service available, the URLs within the XML are pointing to the internal hostname iwdf1030.dmzwdf.sap.corp of the system and not to the external hostname erp.esworkplace.sap.com. Unfortunately the internal hostname is not accessible or known to the internet and that is why we are not able to connect and retrieve the interface definition.
    May be it will take some time to resolve this issuse, till then have a great time.
    Regards
    Vivek
    Edited by: Vivek Kumar Mishra on Feb 28, 2008 11:26 AM

    Hello Everybody
    The ES available at SDN cannot be accessed outside SAP network because if we see the XML of the service available, the URLs within the XML are pointing to the internal hostname iwdf1030.dmzwdf.sap.corp of the system and not to the external hostname erp.esworkplace.sap.com. Unfortunately the internal hostname is not accessible or known to the internet and that is why we are not able to connect and retrieve the interface definition.
    May be it will take some time to resolve this issuse, till then have a great time.
    Regards
    Vivek

  • Mail server log says: master[50]: ERROR: Cannot start mail services...

    Recently, after a year or more of relatively smooth service, my OS X Server 10.4.11 Mail services has been locking up daily.
    I was finally able to get some information from the log files (I am a noob to this) and saw the following right after my most recent reboot of the server:
    Oct 5 09:51:11 mm1 master[50]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/Data/mail/var/imap
    I checked the server and that directory is indeed there on the partition named "DATA", so I am baffled as why the server does not thing the configuration directory exists?
    drwxr-xr-x 15 cyrusima mail 510 Oct 5 09:51 imap
    drwxr-xr-x 15 root admin 510 Oct 3 20:01 imap.BAK
    drwxr-xr-x 15 cyrusima mail 510 Oct 3 20:05 imapold10032009-200707
    drwxr-xr-x 4 jkoerber admin 136 Dec 3 2007 spool
    mm1:/Volumes/Data/mail/var jkoerber$
    Can anyone help me? My customers are yelling for blood because they cannot send/receive emails.
    -- Jon
    Message was edited by: Jon Koerber

    Thanks Alex for the feedback. You are helpful as always!
    It's good to know that the message I am getting from the mail server about the configuration files is only a temporary thing. Although I find it strange that the mail service doesn't know where its config files are since it is specified in the mail server setup.
    I looked at the log files you mentioned and do not see anything that looks like a specific problem with the mail services themselves.
    Recently, however, I have been having recurring problems where my mail server and my Web/Database server have both become unresponsive at nearly the same time even though they are on different class A networks to where I cannot access them via ARD, Server Admin and even SSH. That is usually when my mail server goes offline. I was afraid it was because of that configuration error I was seeing, but think now that the problem could be something else entirely (maybe some kind of network problem or denial of service hacking attack, no idea).
    Thanks again.
    -- Jon

Maybe you are looking for