"Shared storage client timed out' error when starting a batch

I'm getting this error on every node in the cluster. What am I doing wrong?

I also administer a managed cluster with 6 machines, and have been using it successfully for almost a year now. But the only encoding that is submitted is directly through Compressor, never via FCP.
With QMaster, it sees a Quickcluster and a managed cluster the same way. While they are set up differently, the principle is the same, QMaster only sees services.
Exporting out of FCP to any cluster has always been slow. If you want to harness the power of distributed encoding, you could export a Quicktime reference file and take that into Compressor to be submitted to the cluster for encoding.

Similar Messages

Shared storage client timed out error

Hello everybody, please help
I have been at this now for about 2 days and still can't find out the source of my issue using FCP to render a project through compressor to multiple macs using Qmaster.
What is happening is that I start the render and it gets sent to the second computer, I can see the prosessor ramping up then after (+-) 30 seconds I get the error bellow, and the render fails.
Here is my set up:
MacBook1 as the cluster controller
Macbook2 as the service node
connected via a gigabyte switch using an ethernet cable
The error I keep getting is this ("Macintosh-7" is the name of MacBook1, "chikako-komatsus-computer" is the name of MacBook2):
3x HOST [chikako-komatsus-computer.local] Shared storage client timed out while subscribing to "nfs://Macintosh-7.local/Volumes/portable/Cluster_scratch/4AD40699-B5BD6A1A/sha red"
The volume mentioned above in the error is a shared Fire wire drive connected to the MacBook1. It is have full read and write privileges to everyone. This drive is where the project file and all the source video are located. MacBook1 via the Qmaster system preferences is pointing to a folder "Cluster_scratch" on this drive.
I have been mounting this drive from macBook2 using the connect to sever option in the finder under Go menu. This method seems to only enable me to connect to this drive using AFP, is this my problem?
I have "allowed all incoming traffic" of the fire wall on the MacBook1
What is funny (not really) is that i can Compress a previously compiled video with the cluster If I don't go thou Final Cut Pro!
Any help with this would be greatly appreciated.
Thanks

I also administer a managed cluster with 6 machines, and have been using it successfully for almost a year now. But the only encoding that is submitted is directly through Compressor, never via FCP.
With QMaster, it sees a Quickcluster and a managed cluster the same way. While they are set up differently, the principle is the same, QMaster only sees services.
Exporting out of FCP to any cluster has always been slow. If you want to harness the power of distributed encoding, you could export a Quicktime reference file and take that into Compressor to be submitted to the cluster for encoding.

Qmaster error: shared storage client timed out while subscribing to...

Here's my Qmaster setup:
computer 1: CONTROLLER, no nodes
- 8TB RAID hooked up via Fiber
- connected to the GigE network switch via a 6-port bond
- cluster storage set to a path on the RAID
computers 2, 3, 4, 5: RENDER NODES
- each computer has a 2-port bonded connection with the GigE switch
computer 6: Client, with FCS2 installed.
- connected with a single GigE link
I have set up this cluster primarily for command-line renders, and it works great. I submit command-line renders from the client computer, which get distributed and executed on each node. The command line renders specify a source file on the RAID, and a destination path on the RAID. Everything works great.
I run into trouble when trying to use Compressor with this same setup. The files are on the RAID, and all my computers have an NFS automount that puts it in the /Volumes folder on each computer.
I set up my Compressor job and submit it to the cluster. It submits sucessfully, and distributes the work. After a few seconds, each node gives me a timeout error:
"Shared storage client timed out while subscribing to [computer1.local/path to cluster storage]"
Is this a bandwidth issue? Command line renders work fine, I can render 16 simultaneous Quicktimes to the RAID over NFS. I don't see much network activity on any of the computers when it's trying to start the Compressor render, it's as if it's not even trying to connect.
If I submit the SAME compressor job to a cluster with nodes ONLY on the controller computer, it renders fine. Clearly the networked nodes are having trouble connecting to the share for some reason.
Does anybody have any ideas? I have tried almost everything to get this to work. Hooking up each node locally to the RAID is NOT an option unfortunately.

WELL I DO NOW!
Thanks. it's taken 6th months and several paid 'professionals' and then you come in here...swinging your minimalist genius. one line. one single line. and its done.
if you are in london, lets lift a beer or five together.
thank you sir. thankyou!

I get a connection timed out error when trying to connect to the itunes store, if I have pending downloads they show up and I can download, also I was able to access my account, yet I can't access other parts of the store, I am in greece on a macbook pro

I am from the states and am in Greece on vacation. I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store. It is funny because pending downloads show up in the cue, and they download no problem. I can also open my account. When I try to go the the movies or music section of the stor though it just times out. I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing. Any help would be appreciated.
Thanks

Welcome to AD!
There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
Almost all of them have made deals with Symantec to pre-install it.
Horrible, horrible software.
Anyway, glad you finally solved your problem.

Experiencing "timed out" error when uploading podcast

I am experiencing a "timed out" error when uploading a podcast to iTunes. Using PC. I've updated iTunes...

- You really need to ask the Basis team to extend the maximum run time for background processes (30 mins is too short).
- You can also try to reduce the run time by setting up BOM Buffering in configuration so if the same BOM is used again and again (in your case of delete and recreate planned order, yes), it will read from memory.
- You should set the planning horizon and use NETPL (net change in planning horizon) in daily run. So that the run will only find the relevant changes in order proposal up to certain days, thus reduce run time.
- You should discuss with your BASIS team about the list of background job in the batch windows. Specify time in such a way that the performance-critical job (i.e., MRP, reschedule sales order, certain customized report, etc.) doesn't run at the same time.
- You can increase the number of parallel processes to issue several jobs to run MRP at the same time.
Rgrds,

TNS Timed out error when connecting from internet

All,
Apologies if I am missing something simple...
I have set up a test 9i database on a Win 2003 Server, and I can connect to it fine from within my LAN. I am trying to connect to the same database from the internet, but am getting a TNS:Operation timed out error.
I believe I have set everything up correctly:
-Port Forwarding port 1521 on my simple Linksys router/firewall
-TNSPing gives me a sub-second OK (from the internet)
-I can get a TNS:listener could not resolve SERVICE_NAME error if I purposely screw up the service name in the tnsnames.ora file (proving, I think, that I can connect to the Listener from the outside internet)
Am I missing something simple? Why can I ping the listener but not get a response when trying to connect to the database (database is working, I can connect from within my LAN)?
Do I need to download and install the latest release for Win Server 2003?
Thanks,
Chris

Thanks for your response, Michael..
Is this something new in 9i? The reason I ask is that I swear that while working on another project last year I was able to set up a development 8i database in my home office and was able to allow my client hit this database from their own location (in Peru, via the internet) using a vb.net app that I had built. The only thing I did on my home router was to forward port 1521.
If my memory is wrong or things have changed since then, then what other ports other than 1521 are used to connect? Security is not really an issue, as I am just trying to set up a test database in order to Q/A an application I'm building.
Thanks in Advance,
Chris

Connection Timed Out error when I try to access Alert Inbox

Hi experts,
I have not been looking at my alert inbox for a while and I suspect it's very full.
When I tried to open the alert inbox from RWB, I encountered the following error:
<b>500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Mon May 07 11:08:51 2007
Module: icxxthr.c
Line: 2646
Server: ootspdbs02_PI1_01
Error Tag: {-}
Detail: Connection to partner timed out after 60s
</b>
All other functions of the RWB is working fine, including Alert Configurations.
I tried restarting the J2EE instance, but it did not help.
I've checked the SICF services, and they are fine.
I suspect the alert inbox is trying to load a huge amount of data, so it is timing out.
How can I adjust the keep_alive_timeout setting in this case?
When I look into RZ11, I am unable to edit this entry.
Please help.
Thanks.
Ron

Hi Ron,
Follow these steps:
1. Try restarting the JAVA Stack.
2. ST22 check out any Dump.
3. In RWB --> Component Monotring --> check the Cache connectivity test...is all are Green ( Glowing )
Check these SAP Notes 750287,900896,768456
If that doesnt work out, check this SAP Note 840849
Regards,
Prateek

I keep getting network timed out errors when downloading iPad software

How do I download ios5 without getting network timed out errors?

Try temporarily turning off your firewall and antivirus software until the download has completed.

Timed out error when running a report

The error is:
"Request timed out because there has been no reply from the server in 600000 ms"
Does anybody have any idea how to solve the issue?
The following is more info on the report:
Report has 8 subreports and data set is around 7MB size
We generated another report with 83MB of data and this report doesn't have any subreports and its running completely.
using Crystal reports XI r2 SP3, Visual studio 9, BOXI server SP3 and using XML as data source.
Any help would be appreciated.
The following is the Stack Trace:
System.Exception was unhandled by user code
Message="Load report failed."
Source="CrystalDecisions.CrystalReports.Engine"
StackTrace:
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, EnterpriseSession enterpriseSession)
       at Covance.ED.Framework.Reporting.Workflow.CreateReportOutputActivity.executeCrystalReport_ExecuteCode(Object sender, EventArgs e) in C:\Source\TR\Components\Framework\Covance.ED.Framework.Reporting\Workflow\CreateReportOutputActivity.cs:line 189
       at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
       at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
InnerException: System.Runtime.InteropServices.COMException
       Message="Failed to load info object."
       Source="Analysis Server"
       ErrorCode=-2147467259
       StackTrace:
            at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
            at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
            at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       InnerException:

There are a few timeouts that could come into play here. One is a Corba timeout.
You'll want to adjust your ConnectionTimeout in your regisry under HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECTS\Suite 11.5\CER. The default value is 600000. Try doubling it to 1200000.
You may also want to increase your httpExecution timeout as well in your web.config file.
http://msdn.microsoft.com/en-us/library/e1f13641.aspx

Execution timed out error when running opcagt command on linux server with agent 11.12.009 installed

Hi,
Can anyone help me in the below issue.
we have a Linux server with agent version 11.12.009 installed on it. when I try running opcragt command on it through are management server it gives the output that all agent components are running.
but when I check the agent status or version through opcagt command on it it gives below error:
ERROR: (depl-86) Unable to execute command 'opcagt' on node
(depl-176) Message returned from host
(xpl-117) Timeout occurred while waiting for data.
Below are the error lines that I got from system.txt file of the server:
0: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (conf-180) Could not create messenger for configuration server 'ovconfd' and register its methods with the messenger object.
1: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (xpl-89) write(11)[012C5430] failed.
2: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (RTL-28) No space left on device
Could anyone please let me know what can be the issue in this.
Thanks,
Akansha

ORA-00600: internal error code, arguments: [kzxcInitLoadLocal-7], [942],
[ORA-00942: table or view does not exist
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 36
ORA-01403: no data foundWhat does this query return?
SQL> SELECT HOST, ACL
FROM DBA_NETWORK_ACLS;Please see (Redefining a Network Access Control List Fails with ORA-1403 [ID 854083.1]).
Thanks,
Hussein

Getting "Read timed out" error when submitting new podcast

http://www.therpghaven.com/podcast/?feed=podcast
My feed is validated. I've checked it against the example feed and it seems fine. I can subscribe directly from within iTunes and it looks fine, downloads the first episode.
I saw that there was maintenance last night. Is it possible this isn't my fault?
If it is, any clues would be a great help!
Thanks

I'm using WordPress with the Podcasting plug-in, which I have admin access to. That's what generates the feed. But according to the developers, the feed is not actually a file, but something dynamically generated by WordPress when it is called. When you say "actual file" do you mean the podcast itself? Or the feed?
I'm not familiar with WordPress: possibly what they mean is that a process takes place on the server each time a request is received for the feed: if this is so then you can't change that. By 'actual file' I did mean the feed - most systems produce an .xml file and it is that which is submitted to iTunes.
As to log-in, normally the iTunes Store effectively keeps you logged in: I assume you would need to have cookies enabled - is this the case?

ARP/RARP Timed out error during Jumpstart installation

Hello
Good day to you.
One of my JS client machine throwing "ARP/RARP" Timed out error when I try to rebuild the box thro' Jumpstart installation.
The box was earlier installed thro' Jumpstart method and was crashed recently so trying to rebuild it again.
To make a note, my Jumpstart server (Boot, Install & Config - on same machine) and this client box are in different subnet.
Looks the client machine broadcast not reaching the Jumpstart server or something to do with network config.
After issuing "boot net - install" on ok prompt from the client machine, I am getting the above mentioned error - ARP/RARP Time out.
Any thoughts?
Thanks.

The first step in traditional jumpstart is for the SPARC client to gather an IP address from the network via RARP.
The messages indicate that it is not getting a response to this query.
Some possible reasons:
network not working properly
No jumpstart/boot server on local subnet
Jumpstart/boot server not configured for this client
Darren

Timed out but services started

Dear all,
When am starting the services as below adoacorectl.sh start
script returned failure.. but when I check the services it is up and running as you can see .. any iea
Executing service control script:
/u01/prod/inst/apps/prod/admin/scripts/adoacorectl.sh start
script returned:
ERROR : Timed out( 100000 ): Interrupted Exception
You are running adoacorectl.sh version 120.13
Starting OPMN managed OACORE OC4J instance ...
bash-3.00$ sh adoacorectl.sh status apps
You are running adoacorectl.sh version 120.13
Checking status of OPMN managed OACORE OC4J instance ...
Processes in Instance:
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oafm | 25762 | Alive
OC4JGroup:default_group | OC4J:forms | 25731 | Alive
OC4JGroup:default_group | OC4J:oacore | 25702 | Alive
OC4JGroup:default_group | OC4J:oacore | 25701 | Alive
HTTP_Server | HTTP_Server | 25647 | Alive
adoacorectl.sh: exiting with status 0
adoacorectl.sh: check the logfile /u01/prod/inst/apps/prod/logs/appl/admin/log/adoacorectl.txt for more information ...
Edited by: 902105 on Dec 16, 2011 1:00 PM

Please post the details of the application release, database version and OS.
Please see these docs
Release 12 : ADSTRTAL.sh returns error : TIMED OUT( 100000 ): INTERRUPTED EXCEPTION [ID 564536.1]
Starting up AS10g services in an EBusiness Suite Release 12 environment [ID 743518.1]
Using Latest Java 6.0 Update With Oracle E-Business Suite Release 12 [ID 455492.1]
R12: Stopping OPMN Managed J2EE Processes Results In Timeout [ID 566142.1]
Unable to start the Middle-Tier Services after stopping the Instance for Backup [ID 1084306.1]
Timed Out Error When Running Adstpall.Sh [ID 1316649.1]
Thanks,
Hussein

Read timed out error while opening monitor tab in DataServices

Hello all,
Am getting a "Read timed out" error when I try to open the monitor tab in DataServices admin console for a few jobs only. For several jobs, monitor tab opens just fine. But for a few it doesnt and throws the error mentioned above. Mostly this behaviour is noticed with a job having several workflows and dataflows.
The version of DS used is 12.1.0.0. Tried to gather some info on this issue, but couldnt find any relevant thread. Would really appreciate if anyone could help me with it.
Regards,
Prem

check the following post
http://www.forumtopics.com/busobj/viewtopic.php?t=148213

I started getting a Timed Out error message on my iPhone 5 when browsing the web that reads Page could not be loaded. Connection timed out. I performed a Reset Network Settings and still get the error. What is the fix?

I started getting a Timed Out error message on my iPhone 5 when trying to browse the internet tthat reads Page could not be loaded. Connection timed out. I performed a Reset Network Settings and am still getting the error message. What is the fix?

Thanks so much for more direction.
I realized that I bought this iPod T4 about a year ago, so decided to check the date and it is still under the 1 year ltd. warranty until 21 Dec. I contacted Apple via Chat and was informed that the problem may lie in the version of iTunes I was running 10.7. Today Apple released v. 11 of iTunes which I was instructed to download. It's TOTALLY different from iTunes 10.7 - drastically different in fact.
The Apple Chat Rep set up a phone call appointment forl 8:00 pm ET tonight where another Rep will call me to make sure the restore was accomplished OK. With v. 11 of iTunes I can't even find the restore option!!! The phone Rep will have to help me navigate v. 11 of iTunes. It doesn't seem intuitive at all. Maybe it's just me?!?!
Thank you for sending this new link for firmware. It's not clear to me right now whether I'll need it or not. The phone Rep will probably somehow be able to resolve the problem. If not, they'll probably send me to the nearest Apple store if the problem is hardware, as it would be covered under the warranty. I will give another update as to what transpires as a result of the phone call with the Apple Rep.
Again, thank you so much for helping me.

"Shared storage client timed out' error when starting a batch

Similar Messages

Maybe you are looking for