Shared tab in left menu column does not show on one of the computers after setting up Home Sharing

For iTunes 10.3, I have set up home sharing on two computers that run windows 7, I have authorized both computers. The iTunes Shared link for computer 2 shows up on left column for computer 1(main iTunes computer). The problem I am having is that the Shared link for computer 1 DOES NOT show up on computer 2. My network between the both computers is working because I am able to pull/copy music files from computer 1 to computer 2. Why doesn't the Shared link for Computer 1 show up on Computer 2 Itunes left column? Any help would be most appreciated. Thank you.

Nothing had changed when I plugged in my iPod at work today, having changed it to manage manually earlier at home. But after rebooting a few minutes ago, iTunes cranked up and updated the library. The library now appears below DEVICES/iPod on the menu instead of under LIBRARY/Music at the top left, which I'm pretty sure is different from before, but no matter. Also the iPod is still not appearing in My Computer but again, no matter. I am able to play my tunes on the work install of iTunes now and use iDump (which is a helluva lot less trouble than iTunes) to extract them.
Thanks again for all the help.
HP Pavilion, Dell Optiplex Windows XP

Similar Messages

HT201272 An episode of a season pass purchase does not show up as downloadable the day after it has aired on TV.

Bought a season pass to "Revenge" tv show. I usually receive an email the next after the show aired on tv to say it is now ready to be downloaded. For the last episode, no email was received, and checking with the iTunes store says no downloads are available. This has happened once before and I received quick problem resolution from support staff, but this time I was just asked to check for downloads (which I said I had already done) then no further help. Any ideas?

Perhaps the makers of Revenge have not released to Apple yet.

Menu bar does not show on screen?

Menu bar does not show on screen.

I'll assume your profile is wrong (10.4.7?) and you are using Lion in full screen mode. If so click the double arrows in the menu bar which should appeare if you mouse into the menu bar area.
If that isn't the case then are you zoomed in? Contol + fingler drag on mouse (or scroll wheel) zooms in or out (see Mouse preferences, Screen Zoom, look at the little movie).

HT4623 My ipod does not show update settings in the About section

My ipod does not show update settings in the About section how can i get the update ios5 in order to get facebook on my ipod how can i do this

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

My Ipad does not show it is in the right city, My Ipad does not show it is in the right city, My Ipad does not show it is in the right city

My ipad 2 does not show it is in the right city if I check it on mobile me...anyone else have that problem?

At the time you check your iPads location through MobileMe, your iPad would need to have access to and be connected to the internet.

TS1398 My Iphone does not allow me to select the Wi-Fi setting. It all grey and says no Wi-Fi, need assistance to know how to fix this.

My iphone does not allow me to select the Wi-Fi setting. It is all grey and says no Wi-Fi. How can I fix this problem?

Thank you for that. I've been on the web trying to work it out and resetting my phone etc and no luck. Thank you so much for your help. Guess I'll be making plans for a trip into Apple.

WPF: How to make the first column does not show row separator and Left column separator in DataGrid?

Our WPF application uses DataGrid.
One of request is that first column of DataGrid does not show row separator and also does not show Left column separator. So it looks like the first column does not belong to the DataGrid. However, when select a row, the cell of first column still get selected.
How do we make it? Thx!
JaneC

Hi Magnus,
Thanks for replying our question and provide your solution!
Your solution works by setting "HorizontalGridLinesBrush" and "VerticalGridLinesBrush" to {x:Null} in the DataGrid style and modify "CellStyle" in first column as following:
<DataGridTextColumn MinWidth="32"
Binding="{Binding CellName}"
CanUserReorder="False"
CanUserSort="False"
Header="Cell}"
IsReadOnly="true" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="IsEnabled" Value="False"></Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridCell}">
<Border BorderThickness="0" BorderBrush="{x:Null}"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Margin="-1">
<Grid Background="{TemplateBinding Background}" VerticalAlignment="Center" Height="42">
<ContentPresenter VerticalAlignment="Center"/>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
We found another way to achieve it by using DataGridRowHeader. The good way to use DataGridRowHeader is that we do not need to make the first column ReadOnly (click on first column does not select whole row anymore). Select RowHeader in a row will select
whole row. Move scroll bar horizontally, the row header still keep in visible area.
<Style TargetType="{x:Type DataGridRowHeader}" x:Key="dataGridRowHeaderStyle">
<Setter Property="VerticalContentAlignment" Value="Center" />
<Setter Property="HorizontalAlignment" Value="Center" />
<Setter Property="Height" Value="42" />
<Setter Property="SeparatorBrush" Value="{x:Null}" />
<Setter Property="FontSize" Value="16" />
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridRowHeader}">
<Grid>
<Border x:Name="rowHeaderBorder"
BorderThickness="0"
Padding="3,0,3,0"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"
BorderBrush="{x:Null}">
<ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
VerticalAlignment="{TemplateBinding VerticalContentAlignment}"
SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" />
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<DataGrid>
<DataGrid.RowHeaderStyle>
<Style TargetType="DataGridRowHeader" BasedOn="{StaticResource dataGridRowHeaderStyle}">
<Setter Property="Content" Value="{Binding CellName}" />
<Setter Property="Width" Value="35"/>
</Style>
</DataGrid.RowHeaderStyle>
</<DataGrid>
JaneC

HideShow: Column does not show label

I have one hideShow region inside table, but it does not show label in column.
Someone know help me?
See the printscreen: http://www.flickr.com/photos/30358105@N03/3180588230/

Hi,
Under the Identification tab, there is a characteristic 0PSTNG_DATE. The corresponding 4th column is for Cube1, but Cube2 contains the posting date we are reporting on through the multiprovider. The third column (Equal To) is NOT checked for Cube2.
Could that be the problem? What is the significance of this checkbox not being checked for Cube2.
On the other hand, I see 0PSTNG_DATE also under the fifth column (Char/NavAttrib), but the corresponding Cube3 and it is checked under Equal To
Characteristic---Long_Description-Equal_To-In_InfoProvider-Char/NavAttrib
0PSTNG_DATEposting dateCube1--
Cube1
Cube2
Cube2
checked---Cube3--
0PSTNG_DATE
Cube3
0FISCPER3-----Posting period---checked----Cube1
checked----Cube2
checked----Cube3
Checked----Cube4
I hope the above info can from the Identification tab guide help?
Can you help interpret these columns and the significance of the fact that there is no checked under Equal To for the Cube2 which is what actually feeds the column, TargetColumn (i.e the column which does not get populated with date when the Posting Date filed is set.
Thanks.

When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

I resolved the problem. It was somehow related to my using Microsoft
theme pictures. I set Windows to use the basic theme and the problem
went away. Thank you for the suggestions.
Jac

Bookmark bar does not work on one of my computers - w XP

Firefox 4.0 - the bookmark bar does not work. It appears but will not accept drags.
PC w Windows XP - 3.
Another thing too - The open new tab does not show up at all, in order to open a new tab I had to put the "open new tab" tab into the navigation toolbar.
(Works fine on my other computer, & it drives me nuts to have to use Firefox w 2 different setups...)

What's the URL of your site so we can examine it first hand? Have you tried republishing your site with the File ➙ Publish Entire Site menu option?
OT

TS2753 a purchased song does not show my name on the info

I purchased a song thru I-tunes and I cannot get it to play. If I look at the info, it does not show who it was purchased by. All of my other songs do and they play fine.

The 'Purchased' music is just a special Playlist. You can create your own and drag the links into the 'Purchased' PL.
Using the command CMD-J you can add the Purchase date to your list view - sort by date - drag the tunes to the 'Purchased' PL.
MJ

Finder menu bar does not show up always

From time to time (maybe once a month) when I boot up my MBP, Finder Menu bar at the top of the screen does not automaticaly show up. Only basic screen color.In order to bring that bar (with apple icon in the left top corner and little magnifying glass,airport symbol etc in the right top corner) I have to click once at the top of the screen where that bar is suposed to be.Than it shows up and everything runs smoothly afterwords. At the same time my Dock works fine from the beginning. It does not bother me too much because everything else works perfectly fine and it happens not so often. I only wonder if anybody had a similar problem or if that is a problem at all. Thanks!

My own and my girlfriens's new 13" MBPs (10.6.2) have done this a couple of times. I really haven't bother to look into the case because I assumed that it's just a bug as it was happening on both machines. As a matter of fact, I haven't seen it happening for a while.

HT1386 when i plug my iphone 4s into my computer is does not show in itunes, When the menu comes up on my computer for what action I want to take it shows no options for itunes. My phone worked before, Im not sure why it is not working now??

I just recently tried to plug my iphone 4s into intunes. It comes up with the menu of what action do you want to take. My only options only involve photos and videos nothing to do with syncing or music. When I open itunes it does not even show my device in itunes. What do I do??

uninstall itunes
you may have to manually delete anything related to itunes in regedit
reboot and reinstall itunes

Spry Menu Bar does not show up in Mozilla Firefox 1.0.7

I been building a spry horizontal menubar in Dreamweaver.
Everything was working well in both Firefox and IE. Then it
disappear in Firefox. The menubar appears in
www.brycelevancushing.com
Bryce leVan Cushing Web
site
Could someone help solve this mystery?

Many many moons ago, a work-experience student, decided to play a trick on me. Knowing that I often used MS Excel, he decided to change the default text colour to white. On a white background, the information that I tried to enter into the spreadsheet did not show up, making me think that I had a virus or worse on my computer.
Have a look at the following exerpt from your SpryMenuBarHorizontal.css
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: none;
    background: #FFF;
    left: 0px;
    text-decoration: none;
    width: auto;
    padding: 0px;
    z-index: 1010;
Good luck,
Gramps

2D stacked column does not show values

Hi Friends,
I am new to Apex. I have a 2D column chart with two columns for every data point. The display value check box is checked and I can see the values on the chart. But now when i to make it a stacked 2 D column, the Show Values checkbox field gets disabled and the values does not appear on the stacked 2D column chart. I tried the same with 3S stacked column chart and even there the show values gets disabled.
Is there any way i can display the values on the chart for a stacked column? I can see the values when i hover on it in case of Stacked column chart but I need to display the values on the chart.
Kindly let me know how i can do this in Apex?

Hi Pradeep,
In earlier releases of Application Express, the supported version of AnyChart Flash charts did not fully support the display of values for Stacked charts. Therefore, the "Show Values" checkbox would be disabled on the Chart Attributes page. Since our 4.0 release, with the integration of AnyChart 5 charts, the option to display values on stacked charts is exposed via the Chart Attributes page. To take advantage of this option, along with many other charting improvements introduced with our 4.0 release, I would recommend that you upgrade to the latest version of Application Express.
Alternatively, you could switch your existing chart to use custom XML, and change the following line of code in the chart XML from:
<names show="no"/> to <names show="yes"/>For further information on customising your chart XML, please refer to the AnyChart 3 documentation: http://3.anychart.com/products/docs/anychart/index.htm.
Regards,
Hilary

Shared tab in left menu column does not show on one of the computers after setting up Home Sharing

Similar Messages

Maybe you are looking for