SharedObject not working with 'Debuggin Permitted' NOT checked in publish settings

Hello,
I have run into a strange problem writing out SharedObject
data. If I select(check) Debugging permitted in the publish
settings the data is written correclty. If I uncheck the option,
the data is not written. The flush() call returns true in both
cases.
Could this be a security related issue?
Thanks,
Brad

Hey florsignol,
I understand that your monitor, while appearing in System Preferences, doesn't display anything; however, it works fine in BootCamp. These are the applicable troubleshooting steps I would go through to resolve the issue:
1. Reset the System
You can reset the Mac's parameter RAM and SMC.
2. Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
from: Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
All the best,
Delgadoh

Similar Messages

How to work with otool for pre check app befor submit to app

any body work with otool for pre check app befor submit to app.

Searching in Google, I found these explanations :
Timmy OTool is a graphical front end for the command line tool "OTool". It can be used to examine frameworks, applications, static libraries, plugins, and more.
Like the two others helpers, I can't see any link with this forum theme.
May you take care of forums deicated themes before entering one of them ?
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:27:11
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
Oops, posted too late

Air 3.6 not available in publish settings after install - Flash CS6

After installing Air 3.6 beta, Flash CS6 does not have Air 3.6 available in the publish settings - target. Highest available target is Air 3.4.
System: Mac Book Pro-Retina, OS - X Lion.

This is a mystery to me. On my Mac, I have Flash CS6 installed, and it told me at install time it was installing AIR3.5 at the same time. However, in the Flash Publish options, I only have AIR3.2 available?????
I installed AIR 3.6 Beta, and it told me it was upgrading AIR3.5 to 3.6 huh ???? but still not available anywhere I can find it. I can't find it anywhere, and still only have AIR3.2 in the \Applications\Adobe Flash\CS6 directory, and in Publish settings.

Captivate 5 not working with LMS when linking to AICC published file

When we publish and link our Captivate 4 files. Everything works fine. Now that we've upgraded and tried launching the Captivate 5 files. We only get a loading screen. Can someone help us? We provide training for over 10,000 employees and train several departments to use Captivate for our LMS, but now with Captivate 5 not working it brings up a big issue for us.

another HotFix worked for me:
This is with reference to the issue you are facing with AICC courses on LMS.
Please follow the steps mentioned below and let me know if this solves the issue for you.
1.       Close Captivate if already launched.
2.       Navigate to Captivate installed folder ( For Ex : C:\Program Files\Adobe\Adobe Captivate 5)
3.       Navigate to folder “Templates”
4.       Open folder “Publish”
5.       Open folder “AICC”
6.       Rename the HTM file “default.htm” to “default_old.htm”.
7.       Download the zip the file from https://acrobat.com/#d=rZv8-z9C0z4PPMpqjbkZIQ , Unzip the contents and copy the HTM file “default.htm”
8.       Paste it inside “AICC” folder.
9.       Launch Captivate and open the project.
10.   Re-publish the project and upload the content to LMS.
Let me know if this solves the issue.
Thanks,
Ashwin Bharghav B
Adobe Captivate Team
hope it works for you!

I have been trying to make the screen saver on my iMac 27" to work with no results. I change the settings and don't work neither. Please I need help

Since I bought this 27" IMac desktop I've been changing the settings for the screen saver and has been impossible to make it work. My screen goes black and no screen saver. I have try everything, If anyone can help me with this issue I really appreciate. thanks

first of all the only purpose for screensaver since we moved to LCD panels is if you think it look pretty
the old tube crt screens would get the image they displayed for a very long time burned into the phosphor
that being said then make sure your Energy Saver is not set to turn off the screen before or the same time as the screensaver is suppose to kick in

Windows Radius / NPS not working with mac book pro 10.9.4 wired

Hi,
I'm trying to get my Radius windows server 2012 working with the correct setting for using 802.1x wired connection for the mac book pro. The only issue I'm having is there is not much setting in the mac book pro. I'm not sure what need to setup on the sever to make it connect correctly and assign it to the correct vlan when it's authenticated.
Here are some screen shoots for my mac book pro
So I've got it up to a point where I have this issue and here is my screen shots setting:
So the above are my windows 2012 screen shot settings.
On the mac book pro, I'm getting a prompted about adding certificate and I've added that into the laptop and then I need to put the username and password information. I put the following:
[email protected] and the password.
I'm current working with someone at HP on the switch settings, everything looks good.
I know the following:
1. Wireshark: shows server is getting request from the switch but it's not accepting them here are my logs on the NPS:
RAD01 6274    Information      Microsoft Windows security auditing.   Security            2014-08-21 12:40:24 PM
Here is the detail of the machine:
Network Policy Server discarded the request for a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:                              S-1-5-21-2690993882-1154983957-2264505580-1328
Account Name:                         [email protected]
Account Domain:                                  LCS
Fully Qualified Account Name: LCS\username
Client Machine:
Security ID:                              S-1-0-0
Account Name:                         -
Fully Qualified Account Name: -
OS-Version:                             -
Called Station Identifier:                      b4-39-d6-ec-2c-00
Calling Station Identifier:                     ac-7f-3e-e6-32-34
NAS:
NAS IPv4 Address:                   xx.xx.xx.xx
NAS IPv6 Address:                   -
NAS Identifier:                         5412zl-xxx-xxxxswithname
NAS Port-Type:                                    Ethernet
NAS Port:                                 170
RADIUS Client:
Client Friendly Name:               HP Procurve 5412zl switch
Client IP Address:                                xx.xx.xx.xx
Authentication Details:
Connection Request Policy Name:       Secure Wired (Ethernet) Connections
Network Policy Name:              Secure Wired (Ethernet) Connections
Authentication Provider:                      Windows
Authentication Server:             rad01.xxx.xxx.ca
Authentication Type:                EAP
EAP Type:                                -
Account Session Identifier:                  -
Reason Code:                          1
Reason:                                               An internal error occurred. Check the system event log for additional information.
Again I don't know what's the correct setting the default 802.1x for mac book pro, but it should correct.
I'm also not sure what the internal error message is regarding about. The switch should automatically put me to vlan 7
Can you some please help out what the correct authentication method for mac 10.9.4.
Thanks

Flash Player is a browser add-on, not a standalone application.
You can test if the player is correctly installed at http://www.adobe.com/software/flash/about/

Oracle 11g XE not working with oracle BI publisher 10g after enabling ACL

Hello,
I previously work with oracle 10gXE and Oracle BI publisher 10g and it work fine. now i install oracle 11g XE and try to configure it with oracle Bi Publlisher, it show this error
"ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1324 ORA-12570: TNS:packet reader failure" after runing the ACL package to neable network service.
on the database.
Please can any body tell be why this is not working. Tanx.

You'll need to add the apex engine owner to the ACL (Access Control List). Depending on your version of apex the user name varies. i.e. 4.0 is APEX_040000
See Joel's blog for info about the ACL and APEX.
[http://joelkallman.blogspot.com/2010/10/application-express-network-acls-and.html]

Just setting up. Can send messages ok - but not receive at all - settings checked and ok

Just setting up Thunderbird for the first time. Can send emails fine. Can't receive emails. Have confirmed settings with f2s/TalkTalk and they are correct.
Where to now?

Thanks folks.
To gnospen:
* ''Just a thought. Have you set up this pop-account anywhere else like in your smart-phone? Is that or your old mac running?''
?? I don't use my 'phone for emails, so, no.
* ''"If its set up to download and NOT to keep it on the server, then there isn't anything to download, your smart-phone (whatever) has already downloaded it."''
I don't understand this bit. I just want to use Thunderbird as I used to use Outlook. That is, when TalkTalk tell me I have exceeded my email quota I can download the emails to my machine (a MacBook Pro).
'''''* ''''"I don't understand why you don't use IMAP instead as it can sync much better."'''''''
I don't know the difference. It worked before with Outlook. I was advised by TalkTalk to use POP. (Don't remember being given the option of IMAP.)
====
To zenos:
''* "This is going to be messy as talktalk have grown by acquisition of smaller ISPs and has inherited a large number of disparate email services. (I still have a lineone account myself and have also had tiscali, pipex and f2s in the past.) So we may need to know what domain the OP is on."
We were with f2s - got bought by Opal then TalkTalk.
''* "Having said that, I scrolled through the options and they're all plain un-secured pop (110) and imap (143). So I don't understand why the OP has been steered towards an SSL port for POP3. None of them give "inmail.server.com" etc.
''* "To the OP: Have you tried just setting up the account as a new one, and letting Thunderbird find the settings for itself?"''
This is my first time with Thunderbird. I downloaded and installed the programme, then followed the instructions for setting up. Plus inmail.server.com worked before and I was advised that this was correct. (btw, I presume I'm the OP??)
''* "Do you specifically want POP instead of IMAP? Why? "
As noted above, it worked with Outlook; I was advised that POP settings were correct.
''* "Try setting your POP port to 110 and no security."
Tried that. With pop 110 I get "...sending of password did not succeed. mail server responding: syntax error."
Does this give anybody any further clues?

How to Work With Still Images in Premiere Elements 10

I am struggling with the still images in my Titles for my video project, and would really appreciate some help. I have done a lot of googling on this and searched this forum, but can't seem to find the answer I need, maybe not searching the right questions or just "not getting it". Not even PE Adobe tips or Adobe TV cover this, although it seems important to know. I am not clear how PE10 will handle the resolution of an imported still image or graphic art from Photoshop. Perhaps this topic will also help others as well.
I am working on a video project for my job, editing an old training video. Created new Title graphics in Photoshop, inserted the Title images and integrated with video clips, then exported the video segments as MPEG files. I burned the whole video to DVD.
When the final DVD plays on a computer or TV screen, the photo images in the titles are fuzzy even though they were clear 300 dpi images. (I know dpi doesn't matter in video). The title text is also a bit fuzzy and the title text that has animation applied to it is even more fuzzy. Yet the old MPEG video clips look fine - it's just my title graphics and text that look bad (embarrasing).
So I need to know how to improve the quality of the still images/graphics for a video??
Project settings:
- Hard Disk, Standard 48kHz
- Editing Mode: DV NTSC
- Frame: 720 x 480 (0.9091)
- Frame rate: 29.97fps
- with "Optimize Stills" box checked
Using these settings because I am working with MPEG files from an old training video CD.
File Export: MPEG, NTSC DVD Standard
I export the video clips as MPEGS because they will be burned to a CD or DVD for distribution to our staff offices.
Work Details:
In Photoshop, I created still image graphics for each Title sized at 720 x480 with high resolution photos and company logo (300 dpi), and save them as a bitmap to import into PE10. In the Timeline, I insert the still image in "Video 1" track, then in Video 2 track create a Title over it for text (some animated, some still). Sometimes I stack 2 or three titles with text in separate video tracks over one still title image. Yes, there is a red line across the top in the Timeline because I didn't render the still images.
Questions:
• What is the best resolution for images imported into PE10 from Photoshop?
• Should I be creating title graphics/images at 720 x 480 or a larger ratio like 1920 x 1080 so it will display better when seen on a computer or TV?
• Do I need to render each title image in the timeline so that it will eventually display better in the MPEG?
• Is it better to create a title and then insert the still image into the title so they are integrated, rather than layered on separate video tracks?
I would greatly appreciate any assistance.

When the final DVD plays on a computer or TV screen, the photo images in the titles are fuzzy even though they were clear 300 dpi images. (I know dpi doesn't matter in video). The title text is also a bit fuzzy and the title text that has animation applied to it is even more fuzzy. Yet the old MPEG video clips look fine - it's just my title graphics and text that look bad (embarrasing).
Remember that DVD-Video was designed for CRT TV sets, and was a major step up from VHS tape. However, when viewed on an HD computer monitor, or HD TV *, it is still ONLY 720 x 480, with is about 1/4 of the resolution as 1920 x 1080, which is about what we are used to seeing on those display devices. That is but only 25% of the quality. It can never look as good as HD material.
Good luck, and if I missed something, please point that out to me.
Hunt
* With the advent of BD players, and up-rezzing DVD players, things HAVE improved, when viewing a DVD-Video on an HD TV. The newer players have up-rezzing chips, that do a very good job of "improving" the viewed material's quality. However, even with those amazing chips, DVD-Video will NEVER be as good as a full-HD source. Also, computers do not have those up-rezzing chips, so when one views a DVD-Video on a high-rez computer monitor, it will still look pretty bad. There ARE a couple of new DVD software players, that improve the quality of DVD-Video played on a high-rez computer monitor, and a few look fairly promising. I speculate that we will see some more development in the DVD-Video area, especially as BD is not proving to be the big seller, that many promised. Even 3D is not helping BD realize its promise.

Working with RAW Files and JPG

I have a high end digital camera that takes pictures in RAW format as well as JPG format. When I import the photos, it only imports the JPG format. Is there a way to import RAW photo's into iPhoto?

It does (and should by default). However after it stores them in the ORIGINALS folder, it creates a .jpg copy in the MODIFIED folder and uses that by the looks of things. (Use Spotlight or Finder to see if you've actually imported any raw's).
You should see the RAW's displayed in the iPhoto window after import. If not, check the connection settings in your camera menu ... and make sure you are using a program or creative mode (my 20D does not take raw's in the preset or Green mode).
To work on RAW's you'd need to go Adobe Photoshop with Adobe Camera Raw (incl.in CS2) or Apple Aperture.... now significantly cheaper.

My iphone 4 microphone won't record sound on video clips and doesn't work with Skype

This is the first time I have used the forum. My iphone4 microphone won't record sound on video clips, and won't work with Skype.

I have checked that I have the latest software. I have restarted phone. I am not sure how to perform the other things you mentioned , restore and reset as new... Would I lose any data by doing these? Thanks for the reply.

Samsung CLP-315W to wirelessly work with OS 10.8.2?

I know this printer CAN work with my network, it has worked with the current firmware and network printer settings, however it doesn't want to connect recently. Can someone please explain how best to set up a stable static network connection with the printer? Here's what's happened thus far. I have uninstalled the smart panel and the driver and reinstalled it fresh with the newest ones. Both are installed. When I plug in a USB I get a modern app dialog that allows me to access the settings, when I connect it via a wired ethernet connection I can access the Sync Thru setup dialog through any web browser. Other websites say that if I connect via either of those methods and change the setup to Static IP, switch the address, save it and then disconnect the blue light wireless capability should turn on within 20 seconds. The problem is it does not.
Please help me! You would be a hero to many people who got suckered into purchasing this wonderful printer with the WORST customer support ever.
OK here's all the details.
Computer - MacBook Pro Mid 2012 2.6GHz Intel Core i7, 8 GB 1600 MHz DDR3 RAM, OS X 10.8.2
Network - Netgear WNDR3700 - IP 192.168.1.1
Printer - Samsung CLP-315W Serial 1497BAFZ100574H - Firmware - V4.01.08(CLP-310W)
Printer Network Configuration Readout - IP STATIC, IP ADDRESS 192.168.1.15, Subnet 255.255.255.0, Gateway 192.168.1.1
No firewalls are enabled.
Please help and thank you!

Thank you for your reply.
The PDF I am having trouble with when using Safari is a "Weight Workout" that www.activtrax.com automatically creates as an URL and automatically opens using Reader. When I used Adobe Reader 10.1.5, the print symbol showed up. However, when I installed Reader version 11.0.01, only a black screen appeared and no print symbol showed up when I moved my mouse cursor. So, I went back to using version 10.1.5.
ActivTrax states "Your default pdf viewing program will open and display the Workout form." Someone suggested making Preview my default PDF viewing program? Do you know how to do this? If I could make Preview my default PDF viewing program, would doing so prevent me from accessing materials from websites that say that you must have Reader installed to view the item?
In additon, when I open email PDF email attachments, they open in Preview and not Reader. But PDFs that websites create automatically open in Reader.
Thanks for your assistance!

Flash CC crashes after publishing iOS app + publish settings are not being saved to file

I have two issues:
1. Flash CC crashes every time I publish an iOS app
2. My Publish Settings are not being saved
1. Flash CC crashes every time I publish an iOS app
Since yesterday Flash CC keeps crashing right after I publish an iOS app. The app is published correctly though. I tried everything from restarting my MAC, reinstalling Flash, removing the folder "Flash CC 2014" inside Application Support/Adobe. But all this did not work.
2. My Publish Settings are not being saved
Since the first day I installed Flash CC, it did not save my publish settings along with the .fla-file. I never had this issue with Flash CS 5.5. This was not a very big issue, but now every time I publish an app and Flash CC crashes I have to fill in all the publish settings manually. Now I'm getting frustrated. Even saving my settings as a preset, storing it inside a folder and importing it again, won't help. Then I will get the message: "Import failed: invalid profile file."
Can please anyone help me with these issues? It is quite time consuming to continuously enter the settings manually after every crash.
Thanks!

reset your preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

Having issues making GarageBand work with iPad and line 6 midi mobilizer. Any suggestions?

I am having issues making the line 6 midi mobilizer for keyboard work with GarageBand for ipad2.

Check out the iRig Midi iRig MIDI

Latest EyeTV doesn't work with remote after installing latest candelair, 1.20 no option in preferences to activate snow leopard?

After upgrading to Snow Leopard my mac remote no longer works with EyeTV. Have checked EyeTV is the latest version, have also installed the latest Candelair which other users have advised needs to have snow leopard activated in the preferences but on my version there is no mention of this in the preferences pane.
Just lists...
Driver version 1.20 installed
The remote control infrared receiver is enabled
This computer only works with the remote with ID 27 (after I paired it)
Issues with your remote?
Can anyone advise?
Thanks

So, I figured it out myself. Way back in time I had set up some ipfw rules that I had completely forgotten about, which included this:
01000 allow ip from 192.168.0.0/16 to me dst-port 5900 in
Since I switched to the AEBS, of course the IP range changed to 10.0.1.x, so ipfw was blocking it. Problem solved.
Now I just need to figure out why my AEBS keeps crashing..

SharedObject not working with 'Debuggin Permitted' NOT checked in publish settings

Similar Messages

Maybe you are looking for