Sharepoint 2010 farm full backup
I do full backup to sharepoint 2010 farm, in logs write
Estimated disk space required: 94,251 MB.
Backup
Backup Method: Full
Top Component:
Configuration only: False
Progress updated: 5
Backup threads created: 10
at the start of the backup is the approximate size of
94,251 MB (about 92.05 GB), and in the end
all backup files weigh
19 GB. At the start and at the end of
all sizes backup files
do not match. Why?
When you take backup, it require double size of the backup which is actually there, after this the compression happens.
Also check below:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f93e5daf-575d-4565-8d25-9d74a0b7906a/backup-estimated-disk-space-required
Similar Messages
-
Cloning SharePoint 2010 farm with everything same
Hi,
I have one SharePoint 2010 farm running live with SQL server 2008 R2. SharePoint is in one server, Active Directory is in one server and SQL database is in another server. I am creating a clone of the existing SP farm.
I have created a private network where all 3 clone servers are connected (SP, SQL and AD). Before that, I have updated windows server 2008 R2 with latest updates and service packs. I have prepared the AD server, SQL database server and SP server within the
private network with same name, same IP address and everything same as my production server where production server is live. I have installed SP and connected with SQL database and AD with only the configuration database i.e only Central Administration is
running now.
Now I am wondering what will be the next procedure to-
1. Install Nintex Workflow, MS Office Webapps and other related software in SP server and update all with latest packs.
2. How to deploy the SSL certificates.
3. How to restore the farm database.
4. How to update SP with latest packs OR any other issues may arise during this process.
Because, i want to keep my production server live while I prepare the clone environment.
Please give some advice.
Thanks in advance.Hi,
I have restored the farm backup and trying to access my web applications. I have two web applications one is Extranet and another is Intranet with SSL.
When I request for Intranet:-
It asks which authentication I want and display a drop down list where only Windows Authentication is there; there is no login prompt for AD users.
When I request for Extranet:-
It shows An unexpected error occured.
I get the following error in the event log-
1.
Error: RuntimeFilter: Failed to load all runtime filter configurations or the runtime filter component. Exception has been thrown by the target of an invocation.
Event Type: Error
Event Source: SharePoint Foundation
Event Category: Devices
Event ID: 6631
Task Category: Web Parts
User: NT AUTHORITY\IUSR
2.
Load Control Template file/_controltemplate/ManageCrawlRulesControl.ascx failed. Thread was being aborted .
For any request it takes huge time to load including the central admin page.
Waiting for your guidance.
Thanks. -
Hi
i have a sharepoint 2010 farm
and it has total 6 servers, and in all servers i did the latest windows update
and after update i found the sharepoint 2010 administraion service was stopped and when i start its given error message
Log Name: System
Source: Service Control Manager
Date: 7/12/2014 3:01:15 PM
Event ID: 7000
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SPFAPP01.xyz.gov.local
Description:
The SharePoint 2010 Administration service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-07-12T12:01:15.109313700Z" />
<EventRecordID>81462</EventRecordID>
<Correlation />
<Execution ProcessID="576" ThreadID="3372" />
<Channel>System</Channel>
<Computer>SPFAPP01.xyz.gov.local</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">SharePoint 2010 Administration</Data>
<Data Name="param2">%%1053</Data>
</EventData>
</Event>
adilAre you able to run the Config Wizard? Are there any helpful messages in the Application Event Log or in Applications and Services Logs -> Microsoft -> SharePoint Products -> Shared -> Operational?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Random users receive an unexpected error when trying to access SharePoint 2010 farm.
Over the past few months we had occasions where established users trying to connect to my production SharePoint 2010 farm receive a correlation error page when trying to access the farm. I have two WFEs load balanced and the errors show up on either so it
doesn't happen on just on or the other. Specifically today it was three users in one office out of about 15 that were affected the rest were able to access the farm without any problems and there were no other reports from other offices. Each time the
user can eventually get in without any outside intervention it just seems to fix itself after a few hours. Each time it happens I search the logs for the CorrelationID(s) and everytime I see the same set of errors in the ULS logs. I also go check the Windows
Security logs to make sure they connected to the server okay. I've confirmed that the Web App's PortalSuperUserAccount and PortalSuperReaderAccount are both set correctly. Just looking to see if anyone has experienced this and figured what was happening and
how to fix it.
These are the log entries:
Name=Request (GET:http://infoshare.swic.edu:80/SitePages/Home.aspx)
Begin Query the AD to get the user email and display name.
End Query the AD to get the user email and display name.
Leaving Monitored Scope (GetFileAndMetaInfo). Execution Time=29.4404440877166
Leaving Monitored Scope (GetWebPartPageContent). Execution Time=29.6140602113035
Site=/
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=30.6330444222452
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
PortalSiteMapProvider was unable to fetch current node, request URL: /SitePages/Home.aspx, message: Object reference not set to an instance of an object., stack trace:
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonEle...
...v, Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_CurrentNode()
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_metadatanavtree_ascx': Object reference not set to an instance of an object.
Setting [Display] as the FormContext.FormMode for the current page
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
PortalSiteMapProvider was unable to fetch root node, request URL: /SitePages/Home.aspx, message: Object reference not set to an instance of an object., stack trace:
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev, ...
...Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_TryGetRootNode()
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
PortalSiteMapProvider was unable to fetch root node, request URL: /SitePages/Home.aspx, message: Object reference not set to an instance of an object., stack trace:
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev, ...
...Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()
at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.GetRootNodeCore()
Exception in SearchBoxEx::CreateChildControls:System.ArgumentException: Requested value '/sites/search/Pages/' was not found.
at System.Enum.Parse(Type enumType, String value, Boolean ignoreCase)
at Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.GetSiteDefaultsInner(PortalWebSiteMapNode rootWeb, SPSite site)
at Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.<>c__DisplayClass2.<GetSiteDefaults>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated...
... secureCode)
at Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.GetSiteDefaults()
at Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.CreateChildControls()
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
Failed to create a custom control 'PublishingSiteActionsMenuCustomizer', feature 'Publishing' (id:22a9ef51-737b-4ff2-9346-694633fe4416) using attributes (ControlSrc='', ControlAssembly='Microsoft.SharePoint.Publishing,
Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c', ControlClass='Microsoft.SharePoint.Publishing.WebControls.PublishingSiteActionsMenuCustomizer': System.Reflection.TargetInvocationException: Exception has been thrown
by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElev...
...atedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev, Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.WebControls.CombinedBasePermissions..ctor()
at Microsoft.ShareP...
...oint.Publishing.WebControls.ConsoleVisibleUtilities.get_CanShowSiteActionsMenuItems()
at Microsoft.SharePoint.Publishing.WebControls.PublishingSiteActionsMenuCustomizer..ctor()
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
--- End of inner exception stack trace ---
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at Microsoft.SharePoint.Utilities.SPUtility.CreateServerControlFromAssembly(String sControlAssembly, String sControlClass)
at Microsoft.SharePoint.SPControlElement.BuildCustomControl(TemplateControl tctlPage, String sControlAssembly, String sControlClass, String sCon...
...trolSrc, XmlNode xnElementDefinition, SPFeatureDefinition featdefElement, String sElementId)
at Microsoft.SharePoint.SPCustomActionElement.BuildCustomControl(TemplateControl tctlParent)
at Microsoft.SharePoint.WebControls.FeatureMenuTemplate.CreateChildControls().
SPWeb is missing it's CurrentUser for user 'SHAREPOINT\system'.
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.SPUser.get_UserToken()
at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev, Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)
at M...
...icrosoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization)
at Microsoft.SharePoint.Publishing.WebControls.ConsoleUtilities.IsMasterPageGalleryUrlForSite(Uri uri)
at Microsoft.SharePoint.Publishing.WebControls.ConsoleVisibleUtilities.ConsoleAppliesInCurrentContext()
at Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web...
....UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Leaving Monitored Scope (Request (GET:http://infoshare.swic.edu:80/SitePages/Home.aspx)). Execution Time=78.9268136821824Hi LonF1,
For solving your issue, please try to update the SuperUser and SuperReader per the article below:
http://technet.microsoft.com/en-us/library/ff758656.aspx
$wa = Get-SPWebApplication -Identity "<WebApplication>"
$wa.Properties["portalsuperuseraccount"] = "<SuperUser>"
$wa.Properties["portalsuperreaderaccount"] = "<SuperReader>"
$wa.Update()
If this issue still exists, please feel free to let me know.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
What are the steps to change existing sharepoint 2010 farm database server to a new server
Hi
i have a sharepoint 2010 farm and backend with sqlserver2012 standard edition on windows server 2008 r2 server
now what are the steps to if want to connect this farm to a new sql server 2012 on windows server 2012 server and remove this existing server
adilYou have two options:
Use a SQL Alias and you will then need to swing all databases over to the new SQL Server
Don't use a SQL Alias and swing all but the Configuration and Administration databases to the new SQL Server, and individually re-configure Service Applications/Web Applications to use the new SQL Server. This will force you to keep the old SQL Server around.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Added a content database from Company A's SharePoint 2010 farm to ours
I have added a content database from a company (Company A) that we are acquiring. The sent it my SFTP, we downloaded it, added it to the sql db, and I added it as a content database to a SharePoint 2010 farm at our company (Company B) that is built
to the exact build that Company A's farm was built to.
Presently, the database resides in our Development Environment which is a single server that interacts with SQL, which resides on a different server.
If I copy the URL for the site collections from the Company A's DB (from the site collection list), the content renders perfectly, but when I attached the database to a Web application that was tied to a host header with an IP address on the DNS Server
here, at company B, the content doesn't render at all. The only thing that happens is that I am asked to enter my credentials. None of the farm credentials or my credentials (all domain users) work.
I have made myself via the farm administration password the owner of the site content, but I must be missing something, because I get this error from the page when I try to render it:
<b>Error message 401.2.: </b> Unauthorized; Logon failed due to server configuration. Verify that you have permission to view this directory or page based on the credentials you supplied and the authenticatio methods enabled
on the web server.
I am wondering if this has something to do with the origin of the content, due to the fact that it was created on a different farm under completely different credentials and what I have to do to get it to work outside of the server as content
under a new Web app.Hi,
Do you have any update?
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Sharepoint 2010 farm Sql cluster
hello,
i have sharepoint farm with 3 server ( Web front , Sql , search server )
can i make sql cluster to sql with 3 sql server or it be must before begin install sharepoint farm
thanks
NourYour question isn't very clear but i think i understand.
You have an existing farm with a single SQL server.
You want to upgrade your single SQL server to a clustered SQL installation.
Doing so is not easy, you can't upgrade a single server SQL install to a clustered install as far as I know. You'd need to re-build the SQL server as a single node cluster and add the new servers to make the full cluster before moving the SharePoint databases
over.
In addition you'd need to use SQL Aliases to point to the new clustered SQL address. If you've already used them then that's great, if not you'd need to use the old, single server, address as the Alias address and point it to the cluster.
In short: You can do it later but it's quite tricky and best done before you install SharePoint. -
Silly as it sounds, we have a SQL2008r2 Clustered SharePoint farm with only one node. We did intend to have 2 nodes but due to costs and other projects taking priority it was left as is.
We have decided to virtualise the Database server (to be SQL2008r2 un-clustered) to take advantage of VMware H/A etc.
Our current setup is
shareclus
= cluster (1 node – sharedb (SharePoint database server))
shareapp1
= application server (LB)
shareapp2
= application server (LB)
shareweb1 = WFE (LB)
shareweb2 = WFE (LB)
and would like to go to
sharedb01vm = SharePoint Database server
shareapp1
= application server (LB)
shareapp2
= application server (LB)
shareweb1 = WFE (LB)
shareweb2 = WFE (LB)
So at the moment the database is referenced in Central Addministration as shareclus. If I break the cluster, shareclus will not exist so I don’t think I will be able to use aliases(?) but I’m not sure.
Can anyone help? Has anyone done this before? Any tips/advice to migrate or otherwise get the SQL DB virtualised would be greatly received.I havent done this specifically with sharepoint, but I dont think it will be any different.
Basically you build the new VM with the name sharedb01vm. Now when you are doing the cut-over, ie when you are basically moving all the databases, you rename the servers.. ie the new VM will be renamed as Shareclus and the old cluster can be named anything
you like .
At this point the sharepoint server should point to the new VM where you have already migrated the db's.
Another option is to create a Alias in the sharepoint server "shareclus" to point to sharedb01vm.
I have seen both of this in different environments but I bascially dont prefer the Alias option as it creates confusion to people who dont know this.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Silly as it sounds, yes, we have a SQL2008r2 Clustered SharePoint farm with only one node. We did intend to have 2 nodes but due to costs and other projects taking priority it was left as is.
So our current setup is an SQL cluster (1 node), 2 App servers (VM’s) and 2 Web servers (VM’s)
We have decided to virtualise the Database server (to be SQL2008r2 un-clustered) to take advantage of VMware H/A etc.
I’ve had a look around and seen the option to use SQL aliases but I’m not sure that’s the best option. I was thinking of rebuilding the DB server but was wondering if there is any other options
Has anyone done this before? Any tips/advice to migrate or otherwise get the SQL DB virtualised would be greatly received.Hi, yes that's correct, but my query really is about the SharePoint side with regard to SharePoint and maybe using SQL aliases.
My current setup is
shareclus
= cluster (1 node – sharedb (SharePoint database server))
shareapp1
= application server (LB)
shareapp2
= application server (LB)
shareweb1 = WFE (LB)
shareweb2 = WFE (LB)
and would like to go to
sharedb01vm = SharePoint Database server
shareapp1
= application server (LB)
shareapp2
= application server (LB)
shareweb1 = WFE (LB)
shareweb2 = WFE (LB)
So at the moment the database is referenced in CA as shareclus. If I break the cluster, shareclus will not exist so I don’t think I will be able to use aliases(?) but I’m not sure.
Can anyone help? -
Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment
Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, ShrutiYou should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter -
Hi All
I'm attempting a full restore of a SharePoint 2010 farm, single server housed on the same server as the SQL server that holds the SharePoint databases. Backup and restore is via Backup Exec, the backup job was carried out via BE 2012 and the Restore is via
BE 2104. The server I'm attempting to restore to has also been restored by using the system state and a copy of the drives from the original source server - hence its pretty much a clone of the source server.
Irrespective of the account used to run the restore job I'm seeing repeated failures with the error "Unable to lock the Microsoft SharePoint Farm Topology. You must unlock the farm topology and retry the job".
By restoring the admin databases directly by taking a SQL backup of the source databases and restoring these to the server I'm attempting to restore SharePoint to I have succeeded in bringing the SharePoint admin console back to
life, none of the sites are in a locked state, and they can be locked and unlocked both via the admin console or via Powershell. Locking and unlocking the makes no difference.
Any ideas where I can look to from here, could the above error be a cryptic Backup Exec error that doesn't actually mean what it says?Hi,
Reviewing the DPMRACurr log on the target server during the Date/Time of restore may assist with potential paths to why the job is failing. The logs can be found in the
following path on the target server <DPM Install path>/Program Files Microsoft Data Protection Manager/DPM/Temp
The logs may uncover why we face the current issue. For example the following “ATTACH " – Failed <and also reason why>
Also the DPM server MSDPMCurr log during the Date/Time of restore may also assist with the issue you face. For example the following may be seen “MountDatabaseFailed”
Also note the below process is carried out with the method of restore which was used.
DPM restores the DB to the destination SQL server once the DB is attached, then the restore process is complete and now will be SharePoint front end server connecting to
that DB using the account that was setup with configuresharepoint.exe -enablesharepoint protection. That account needs permissions to connect to that database. The attach phase itself is using the system account from DPMRA process on the local SQL Server.
If you identify the issues are permission related first ensure
the DPMRA service [logon account] has access within SQL for the SQL instance that we are restoring to this account will need DB creator for the following system DB master.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II.
[MSFT] This posting is provided "AS IS" with no warranties, and confers no rights." -
Sharepoint 2010 user profile full synchronization process
what is the impact of sharepoint 2010 user profile full synchronization process in sharepoint 2010 farm.
If you have 5k users in your environment and you want to run full synchronization process, will that bring any services down?
I guess it should only impact anything related to user profile service?
Is my assumption correct?
features like people search, my profile might be impacted but not the sharepoint site itself ...
Any input will be appreciated...
-Mit
SP-Admin_MitRunning a full synchronisation isn't going to bring down any of your SharePoint services. How much time it takes, and the impact it will have on other SharePoint services all depends on your SharePoint architecture. E.g is the synchronisation server also
a WFE (web front end) server?
According to the TechNet documentation, the synchronisation process makes heavy use of network resources, so that might be a concern.
Also, other factors, such as different synchronisation sources (other LOB systems you might be synchronising with) will have an impact on the time and resources used to perform the synchronisation.
If your SQL servers and SharePoint application servers are sized correctly, you should be fine (from a SharePoint perspective).
For more info, see:
Profile synchronization overview (SharePoint Server 2010)
Plan for profile synchronization (SharePoint Server 2010)
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos -
Hello Community
Currently I have a Sharepoint 2010 Server farm.
One server contains the database and DNS server
because it is the the domain controller.
The other server Contains the Sharepoint 2010 Server software
and is the the application server where applications such as Metadata,
UPs, etc, reside (including web applications with sites built with the UI).
Now I am going to change to Sharepoint 2013 Server because currently
there is no newer version of Sharepoint available.
I am ready to rebuild the current Sharepoint 2010 farm configuration into
a Sharepoint 2013 Server farm from scratch.
The question is what do needs to be added and\or changed to make the current
Sharepoint 2010 Server farm configuration work as a Sharepoint 2013 Server farm?
Thank you
ShabeautThere is no direct in-place uprade method for SharePoint 2010 to 2013. You need to create a new SharePoint 2013 farm from scratch and attach service and content databases to upgrade them. Check out Upgrade
to SharePoint 2013 for more information about the process.
If you have another server, you would install SharePoint 2013 on this. If you don't, you'll need to remove SharePoint 2010 from your existing server and then install SharePoint 2013. Check out Hardware
and software requirements for SharePoint 2013 before starting to make sure your server meets the minimum requirements for SharePoint 2013:
Web server or application server in a three-tier farm
Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013.
12 GB memory
64-bit, 4 processor cores
80 GB for system drive
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user
Hi!
Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
10/7/2012 2.497
11/7/2012 2.723
12/7/2012 2.722
13/7/2012 2.699
16/7/2012 5.055
17/7/2012 4.963
18/7/2012 4.954
19/7/2012 4.998
20/7/2012 4.965
23/7/2012 5.117
24/7/2012 5.012
25/7/2012 5.071
As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
The number of page views remained constant.
So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
from yesterday (July, 25th) Top Visitors report:
# Visitor Page Views %
1 Cinthia XXXXXXXXXX 359 0,55%
5 Giselle XXXXXXXXXX 143 0,22%
7 Aline XXXXXXXXXX 138 0,21%
15 nt\cmazevedo 111 0,17%
60 nt\gbsantana 69 0,11%
73 nt\aglsiqueira 65 0,10%
"Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
About the environment:
We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
Does anyone have any tip about what is going on?
Thanks in advance!Hi, Manas!
First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
I have four web servers on my farm named from P01 to P04. Then I created this test script:
Step 1: Change local HOSTS file to point the web application on the server P01.
Step 2: Access site "A"
Step 3: Access site "B"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P02.
Step 2: Access site "C"
Step 3: Access site "D"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P03.
Step 2: Access site "E"
Step 3: Access site "F"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P04.
Step 2: Access site "G"
Step 3: Access site "H"
Step 4: Close the browser.
I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
XXXXXXXXXX".
With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
Thanks! -
Sharepoint 2010 SQl 2008 r2 Reporting Services Integrated with Claims
i have a 4 server sharepoint 2010 farm all servers are windows 2008 r2 x64
two severs are sharepoint app/wfe servers
one server is SQL sharepoint content db server sql 2008 r2 enterprise
one server is SQL Claims Provider DB and reporting services on SQL 2008 r2
the site is behind a forefront tmg proxy firewall for both internal and external users and both locations are producing the same results.
the web application i am having an issue with consists of a primary web app claims enabled web app that only has NTLM enabled, with an extended extranet webapp that supports claims and NTLM.
there is surrently a site collection that has been configured for reporting services when i log into the site as a SQL Claims user i am able to run the reportbuilder as a content type using the New Report builder report content type from a library on
this site. Reportbuilder launches and i am once gain prompted to login i login with the same credentials i used to log into the site and reportbuilder opens up and then i am able to open datasourceas and reports.
When i log in to the same site collection as a domain user i am able to log in to the site and launch reportbuilder. When reportbuilder opens up i am prompted to log in, i insert my domain\username and password and nothing happens the login prompt appears again
blank on the back end it throws the following exceptions
1. Password check on 'username' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException:
The security token username and password could not be validated.).'.
2.An exception occurred when trying to issue security token: The security token username and password could not be validated.
any thoughts on where i should begin troubleshooting this.I think i am getting close i am now seeing a new error it seems that the sp farm account is unable my domain account when launching reportbuilder.
vent code: 4006
Event message: Membership credential verification failed.
Event time: 4/6/2014 10:59:05 AM
Event time (UTC): 4/6/2014 2:59:05 PM
Event ID: 7640af98dab846829f78e7d74a4e1e8a
Event sequence: 9
Event occurrence: 8
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/2/ROOT/SecurityTokenServiceApplication-1-130412687342754349
Trust level: Full
Application Virtual Path: /SecurityTokenServiceApplication
Application Path: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\SecurityToken\
Machine name: (SP WFE MACHINE NAME)
Process information:
Process ID: 8044
Process name: w3wp.exe
Account name: (SP FARM ACCOUNT)
Request information:
Request URL:
Request path:
User host address:
User:
Is authenticated: False
Authentication Type:
Thread account name: (SP FARM ACCOUNT)
Name to authenticate: (doamin account launching reportbuilder)
Custom event details:
Maybe you are looking for
-
No Disk error in Premiere Elements 13
I am getting the following error: "There is no disk in the drive. Please insert a disk into drive\Device\Harddisk1\DR1." If i click continue about 5 times the box disappears & I can continue working. The same thing occurs at random when i am attem
-
Vendor master record international address
I have a client in Kazakistan with SAP release 4.7. They need to manage vendor master records in 3 languages (Kazak, English and Russian). How can I manage this with SAP?
-
Every time I try to access system preferances on my mac it comes up with a notifacation that it is unable to open as it is in "Trash" when i try to find it in trash to remove it, it is not there. I have tryed system updates but nothinng has so far wo
-
Solaris 9 Bug with Installer Scripts?
The installer for my product, which works fine on Solaris versions from 2.5 through 2.9 Early Release, does not work on the released Solaris 9. The problem is visible right away in my "request" file, which early in the file uses the standard shell va
-
Don't know what happened. The page I published was uploaded correctly and I can see them if I login to my .mac a/c, and I find them all on the section of "my pages". But iWeb keep annoucing the link as a old page link which I don't see in the "my pag