SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,
Hi,
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Similar Messages
-
When Making a new play list, the play list was on the right of the screen and this allowed you to drag your music onto the playlist, my setup has changed to the left of the screen which does not allow you to drag your music across, how do I reset?
In the top corner of iTunes is a small icon with a down arrow, click on that and choose 'show menu bar'.
Then on the view menu which now appears choose 'show sidebar' -
I am using an iMac, 8.1, early 2008. I installed Windows XP at that time. I am now using OS 10.8.5 and want to remove the Windows partition to free up disk space. Boot Camp Assistant does not allow me to select the "install or remove" option. How can I get rid of the Windows partition?
You can try removing it in Disk Utility.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the Disk Utility main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. Select the bottom rectangle/partition. Click on the Delete [-] button below the sizing window to remove it. Click on the Apply button. Wait until the process has completed.
4. In the lower right corner of the sizing rectangle for the remaining partition is a resizing gadget. Select it with the mouse and drag it all the way down to the bottom. Click on the Apply button and wait until the process has completed.
You should now have a restored single volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work. -
How do I remove an entire email account from mail if it does not allow me to click "remove mailbox"?
Welcome to the Apple Community.
Unfortunately you can't delete accounts, you also can't change or remove iCloud addresses. -
When clicking on a lookup, firefor does not allow me to select from the list
When I use firefox, the website I am on has lookup fields located on it, firefox does not allow me to select my preferred option from the list. also when I slect another lookup from a list it displays the message 'invalid lookup value located in field ......'
This does not happen in IEStart Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
how to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, asking for adobe livecycle to get installed. please help.
Easiest way to do it is the following:
- Open the PDF file in Acrobat.
- Go to Tools - Forms - More Form Options - Export Data.
- Save the form data as an XML file somewhere on your system.
- Open XML the file in a plain-text editor (I recommend Notepad++).
- Let's say you want to replace all the years in the dates from "2013" to "2014". Do a global Search&Replace of "2013-" to "2014-" (I added the dash just to make sure that only date fields are edited).
- Save the XML file (maybe under a new name).
- Go back to the PDF file, and now go to Tools - Forms - More Form Options - Import Data.
- Select the edited XML file and import it.
- Done! -
My iphone does not allow me to select the Wi-Fi setting. It is all grey and says no Wi-Fi. How can I fix this problem?
Thank you for that. I've been on the web trying to work it out and resetting my phone etc and no luck. Thank you so much for your help. Guess I'll be making plans for a trip into Apple.
-
I keep Trying to Delete my photos, which I backed them up on my computer, on my Iphone, but my iphone does not let me to delete them. It shows select, but it does not show trash. I have no more storage on my phone and I have to delete my photos.
If you may know how, Please let me know.
Thanks
Matt BerenjiPhotos synced to your phone from your computer can only be removed by syncing them off again. To do this, do the following:
Connect your phone to your computer using your usb cable
Open iTunes on your computer
Click on the name of your phone in iTunes
Go to the Photos tab of your iTunes sync settings
Uncheck the folders that contain the photos you no longer want on your phone. To remove them all, uncheck "Sync Photos"
Click Apply at the bottom to sync your phone.
If you only want to remove some of the photos from an album, but not all, remove these photos from the folder by the same name on your computer, then sync your phone. -
How do i sync my iphone to itunes when it does not allow me to select/view my iphone5
how can i sync my iphone5 to itunes when i am not given the option to select my device, sync option is grayed out
See the troubleshooting steps in the appropriate article here:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows -
In the old pages you could simply copy the thumbnail and past a certain page into a different document.
The new pages does not allow you to do this.That and 95 other things it does not let you do.
Pages '09 should still be in your Applications/iWork folder, use that instead.
Peter -
How do I turn my nano off when holding the pause button does not work?
my nano won't turn off or take a charge.....Help.
You know, one good way of putting people off helping you is to post multiple threads with your one problem in it. It's very silly and very tedious.
Have you checked the thousands of other threads that have discussed this same problem? That would probably be a better use of your time than what you are doing now. -
supposedly therer is a "NO" to check on mounting an audio CD. There is none
supposedly there is a "Combine tracks" choice in the right hand corner of iTunes. There is none.
Any suggestions? (I only do classical music and try always to combine movements of symphonies and concertos etc.)See this discussion...
https://discussions.apple.com/message/20680548#20680548 -
Workflow menu option not showing up in edit form or the ribbon in SharePoint 2010 list
In a SharePoint 2010 list I created a workflow (in SPD) and published, but in the Edit Item form, there is no Workflow option. In the ribbon, the "Workflow" button is greyed out.
But I see this option in other lists. Where is the setting I can get this workflow option show up in menu?
Thanks in advanceHi,
Glad to hear your issue solved and thanks for your posting!
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
When I go to the manage my ID page it only asks me the questions and does not allow me to change the answers.
1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contacting Apple for support
and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions -
How to populate a sharepoint 2010 from the active directory.
I want a list of all the computers in the active directory,
another one with all users.
I want also to populate a sharepoint 2010 list from the sharepoint user profiles.
Thanks
szWhile
the contacts list is usually filled out for contacts that are outside the company, there are times when you would use a contacts list to store internal and external resources. Wouldn’t it be nice if you didn’t have to re-type your internal contacts’
information that are already in the system? Now you can with a little InfoPath customization on the contacts list.
Here’s our plan:
Create the contacts list, and open in InfoPath
Create a data connection to the User Profile web service
Customize the form adding some text, a people picker and a button
Create InfoPath rules that will populate the contact fields from the user fields in the User Profile store
Let’s get going! Before we begin, make sure you have InfoPath 2010 installed locally on your computer. I also want to give credit Laura
Rogers and Darvish Shadravan’s book Using
Microsoft InfoPath 2010 with Microsoft SharePoint 2010 Step by Step. I know it looks like a lot of steps, but it’s easy once you get the hang of it.
So obviously we need a contacts list. If you don’t already have one, go to the SharePoint site where it will live, and create a contacts list.
From the list, click the List tab on the ribbon, then click Customize form:
So now we have our form open in InfoPath 2010. Let’s add our elements to the form.
Above all the fields, let’s add some text instructing users what to do with the the field we’re about to add (.e.g To enter an existing user’s information, choose the user below).
Insert a people picker control by clicking the Person/Group Picker control in the Controls section of the ribbon. This will add a column to the contacts list called group.
Below the people picker, insert a button control from the same section of the ribbon as above. With the button still highlighted, click the Control Tools|Properties tab on the ribbon.
Then in the Label box, change the text to something more appropriate to our task (e.g. Click here to load user data!).
You can drag the button control a little larger to account for the text.
We should end up with something like this:
Before we can populate the fields with user data, we need to create a connection to the User Profile Service.
Add a data connection to the User Profile Service
Click the Data tab on the ribbon, and click the option From Web Service, and From SOAP Web Service.
For the location, enter the URL of your SharePoint site in the following format – http://<site url>/_vti_bin/UserProfileService.asmx?WSDL. Click Next.
Note - for the URL, it can be any SharePoint site URL, not just to the site where your list is.
For the operation, choose GetUserProfileByName. Click Next.
Click Next on the next two screens.
On the final screen, uncheck the box for “Automatically retrieve data when form is opened”. This is because we are going to retrieve the data when the button is clicked, also for performance reasons.
Now we need to wire up the actions on our button to populate the fields with the information for the user in the people picker control.
Tell the form to read the user from the people picker control
Click the Home tab on the ribbon.
Click the button control we created, and under the Rules section of the ribbon, click Manage Rules. Notice the pane appear on the far right.
In the Rules pane, click New –> Action. Change the name to something like “Query and load user data”.
Leave the condition to default (none – rule runs when button is clicked).
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Click the Show advanced view on the bottom. At the top, click the drop down and choose the GetUserProfileByName
(Secondary) option. Expand myFields and queryFields to the last option and highlightAccountName. Click ok.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Again click the show advanced view link, but this time leave the data
connection as Main. Expand dataFields, then mySharePointListItem_RW. At the bottom you should see a folder called group (the people picker control we just added to the form). Expand this, then pc:Person,
and highlightAccountId. Click Ok twice to get back to the Rules pane.
If we didn’t do this and just queried the user profile service, it would load the data of the currently logged in user. So we need to tell the form what user to load the data for. We take the AccountID field from the people
picker control and inject into the AccountName query field of the User Profile Service data connection.
Load the user profile service information for the chosen user
Click the Add button next to “Run these actions:”, and choose Query for data.
In the popup, for Data connection, click the one we created earlier – GetUserProfileByName and clickOk.
We’re closing in on our goal. Let’s see our progress. We should see something like this:
Now that we have the user’s data read into the form, we can populate the fields in the contact form. The number of steps to complete will depend on how many fields you want to populate. We need to add an action step for
each field. I’ll show you one example and then you will just repeat the steps for the other fields. Let’s update the Job Title field.
Populate the contact form fields with existing user’s data
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Highlight the field Job Title.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Click the Show advanced view on the bottom. At the top, click the
drop down and choose theGetUserProfileByName (Secondary) option. Expand the fields all the way down until you see the Value field. Highlight it but don’t click ok, but click the Filter
Data button, then Add.
For the first dropdown that says Value, choose Select a field or group. The value field will be highlighted, but click the field Name field
under PropertyData. Click Ok.
In the blank field after “is equal to”, click in the box and choose Type text. Then type the text Title.
Click ok until you get back to the Manage Rules pane. The last previous screen will look like this.
We’re going to update common fields that are in the user’s profile, and likely from Active Directory. You can update fields like first and last name, company, mobile and work phone number, etc. For the other fields, the
steps are the same except the Field you choose to update from the form, and the very last step where you enter the text will change. Here’s what the rules look like when we’re done:
We’re all done, good work! You can preview the form and try it now. Click Ctrl+Shift+B to preview the form. Once you’re satisfied, you can publish the form back to the library. Click File –> Quick
Publish. Once it’s done, you will get confirmation:
Now open your form in SharePoint. From the contact list, click Add new item. Type in a name, and click the button and watch the magic happen!
Maybe you are looking for
-
How do I get my wireless printer, to print homework , and from the internet on my laptop
HP touch smart all in one printer, Model isD110a, window xp, vista, 7 did not run in computer, did not act knowledge disk [Personal Information Removed]
-
Hi All, I am not an experienced ABAP OO programmer. Here is the requirement. I need to develop an ABAP OO program which has to send an SMTP mail for all exceptions. The exceptions need to be handled using event handling functionality inside try catch
-
hi everyone, iweb is behaving really weird today! there seems to be so many glitches, but i'm not sure what the real problem is. please help. i designed a simple box with text in it. I then put a line border around the box. Then i made the box orange
-
IOS4 on 3GS - photos cannot import to PC
Had my iphone 3GS upgrade to iOS4, problem is that photos taken after the upgrade are not able to import to PC when i connect my iphone to PC. Photos taken after the upgrade are stored in camera roll , old photos were syc. to camera roll too. But whe
-
whenever i launch DBCA to create the database to configure it to ASM it asked for the password specific to ASM , the ASM instance is running well,,,,,,,as sysdba ............. but when i enter the password to create the database on DBCA it shows me e