SharePoint 2010: move files in the library to a folder

Hi,
faced out with a interesting problem: have a library with several folders: A, B, C.
The folder B and C has several thousands of items and these folders I can open with explorer and manipulate with the items in it.
The folder A has ~65k items in it and several subfolders in it. I can open with explorer only subfolders of folder A, but openning A folder fails (through web everything works ok).
Tried to change registry key - FileAttributesLimitInBytes to different values: 100000000 , 300000 but nothing changed.
The goal is to sort files in the A directory to a different subfolders to have no files in that folder.
Maybe there are other ways to move these items to a subfolders?
thanks for any help.

Hi ,
1.      
You can use custom code to move the files in a document library to another document library .
2.      
Or you can use the workflow copy list items to another list .But the workflow will only copy one item at a time .
3.      
Open the site in SharePoint designer .Open the  All Files folder .
4.      
Then copy the documents which you want to move ,then page them into another document library  .
For more information ,please refer to this site:
Moving Documents from One Document Library to Another :
http://geekswithblogs.net/MOSSLover/archive/2008/05/30/moving-documents-from-one-document-library-to-another.aspx
Thanks
Entan Ming
TechNet Community Support

Similar Messages

  • Cannot import a .mov file into the library

    I am trying to import a .mov file into my library so I can
    create a .fla file. Every time I try to import it into the library
    using the import wizard, it starts the importing process and always
    quits not quite two minutes into the process. It then returns me to
    the front page of the import wizard. I have done this before with
    absolutely no problems.
    The one thing that I am wondering about is the size of this
    particular .mov file. It is 377MB. Do you think this may be part of
    my problem? Thank you in advance for anyone's input or
    suggestions!

    Jeremy Williams wrote:
    > I am trying to import a .mov file into my library so I
    can create a .fla file.
    > Every time I try to import it into the library using the
    import wizard, it
    > starts the importing process and always quits not quite
    two minutes into the
    > process. It then returns me to the front page of the
    import wizard. I have
    > done this before with absolutely no problems.
    >
    > The one thing that I am wondering about is the size of
    this particular .mov
    > file. It is 377MB. Do you think this may be part of my
    problem? Thank you in
    > advance for anyone's input or suggestions!
    I would consider 10mb to be too big for a flash file. Even if
    it was CD
    I would load it dynamically to avoid performance problem.
    377mb is out of the question way beyond flash ability to
    maintain stable
    performance, not just the final output but the IDE itself.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Share files from the Library/Application Support folder between user accounts?

    I am using Mac OS 10.10.2, and am having trouble with allowing my son's user account to see his Minecraft files which are on my user account (User/Library/Application Support/Minecraft)   how do I make it so that Minecraft will find and use these files rather than the empty folder on his own user account?
    thanks!

    Thank you! I should have thought of that. So, what I actually did was go into finder, "get info" on the Minecraft folder, and check the "share folder" box in the info window.  I was then able to open his saved worlds on his account, and doing it this way will mean any changes to them can be accessed from my account as well.
    Thanks again!

  • How do I move files from Event Library to Project Library?

    How do I move Files from Event Library to Project Library? I tried drop and drag, that didn't work. I am new to Apple. I have always had a windows box b4 this. If anyone can help, please do. Thanks
    Alain

    welcome argardner to the  boards..
    you're missing the concept of iM .. you don't move 'files' from Event to Project Library.. Events is the big box of all your imported clips; now, from that box of bricks, you drag the clips into all kind of projects.. you can 're-use' the same clip again'n again in many projects.. you can use all clips of all Events in one Project.. or all clips of one Event in two projects.. or..
    spend some time here:
    http://www.apple.com/ilife/tutorials/#imovie
    http://manuals.info.apple.com/en/iMovie08_GettingStarted.pdf
    the concept of Events & Projects, Clips and Libraries is at first glance very different to 'normal' editing apps, but you'll get convenient to it within minutes..

  • I have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

    i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

    Hi
    Did You ever use - iPhoto ?
    Did You may be direct iPhoto to a different Photo Library
    As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
    Do - When no other program is running that might interfere
    • Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
    • Now iPhoto let's You select Photo Library
    • Select the one in Your Account / Home folder / Pictures ! !
    • Then iPhoto should start up OK
    • Now Quit iPhoto
    • START iMovie
    Does it still hangs - then I would suspect - iMovie Pref. file
    If it Run's OK - Then HURRAY !
    Yours Bengt W

  • IPhoto won't import movies (.mov, .mp4) into the library since last upgrade to 9.5.1 (902.17)

    iPhoto won't import movies (.mov, .mp4) into the library since last upgrade to 9.5.1 (902.17). Error message is "File format not recognized". Before that, no problem. Had them first on SD-card over USB, tried then to copy to the HD (Desktop) and import from there, but didn't work. Imported successfully into iMovie and exported as .mp4, but even this is not recognized.

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • I suddenly can't watch .mov files with the QuickTime Player x?

    I suddenly can't watch .mov files with the QuickTime Player x? There is always the message, i should look after new software! Can you help me?

    Handy-dandy cut and paste to the rescue!
    you need to install some other stuff to get the full file functionality back.
    Here's the list.
    Start with QT 7.6.6. - http://support.apple.com/kb/DL923
    Get Perian, and install it. - http://perian.org
    then VLC, - http://videolan.org
    DivX - http://divx.com - and the
    Flip4Mac package from Telestream - http://www.telestream.net/flip4mac/
    A52/AC3 downloader: https://www.macupdate.com/app/mac/21875/a52codec - In this installer package there is an audio A52Codec.component. DO NOT USE IT! Throw it out and use the one that is linked below.
    This is what I've put into my system and so far I've gotten every file to run fine, even my oldest videos.
    These are codecs you should see.
    In System/Library/QuickTime
         AppleIntermediateCodec.component
         AppleMPEG2Codec.component* (*optional if you've bought it)
         DivX Decoder.component
         Flip4Mac WMV Advanced.component
         Flip4Mac WMV Export.component
         Flip4Mac WMV Import.component
    In your Home/Library/QuickTime/
         AC3MovieImport.component (you may or may not want this component, in some instances it causes conflicts. In my system, it doesn't. Who knows why? I don't.)
         Perian.component
    For AC3 sound that is in most .mkv files, you need the A52Codec.component, this is the one you want, here: https://code.google.com/p/subler/downloads/detail?name=A52Codec.component.zip - unzip the file and put the component into the System/Library/Audio/Plug-ins/Components
    Go back to your Perian settings and in the Audio Output button, set it to 'Multi Channel Sound' - Ignore the message Perian puts up and select it.
    By doing a 'Get Info' on your files and where it says 'Open With' - default them to the QuickTime 7 program. Perian no longer will work with QuickTime Player so you must have QT 7.6.6 and set it so it is the default for all the filetypes you use.
    It works perfectly with QT7. So far I've gotten ALL my old videos to play.
    .avi, .mov (with the AC3 sound), .wmv, .flv, .mp4 and .m4v. all run fine as do all the older formats.
    Good luck!
    Deb.

  • After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow?  Thank you, Filippo

    On IMac 10.9  After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now?  Anyone know?  Thanks, Filippo

    I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
    I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
    Thanks

  • Macbook Pro won't let me move files to HD without authentication. Also when I try to move files from the HD to the desk it just copies them.

    My 2013 Macbook Pro running Mavericks 10.9.5 won't let me move files to the HD without authentication. So I have to keep putting my password in. Also when I try to move files from the HD to the desk it just copies them. This just suddenly happened last night. Anyone have any ideas what it could be? Thanks

    See http://support.apple.com/kb/HT1229?viewlocale=en_US - I doubt that it will solve your problem, though. You may want to post on the iPhoto forum - that's where all of the iPhoto experts hang out.
    Good luck,
    Clinton

  • I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Uploading .WMV files to my Asset Library spawns 2 files in the library. One conent type = Video and the other = Image. Both have same name and are .wmv

    My 365 site is developed this rather odd behaviour.
    I think its as a result of something I did when I tried and failed to use Document Sets to mange video files.
    Anyway the result is like the title say's I know get two files in the library. What's interesting is the one that is content type = Video opens up the properties dialog for Video but does not play.
    The copntent type = Image file opens the image property dialog and does play.
    Note that I'm the admin for the sub-site, have very litle experience, no training and have ticked the site administrator off so much with stupid questions he's not talking to me so any help is very welcome.
    Thanks

    Hi Rebecca,
    Thanks for responding.
    I can't confirm that it's an OOB Asset Library becasue I don't know how to find that out. When I'm in Suite Content and click on ... then on About I get "Asset Library  A place to share, browse and mange rich media ssests, like image, audio and
    video files.' I so hopefully it is. Additional information - it worked okay before I messed something up when I was trying to create a documet set. It's broken all the libraries of this type on the site.
    Just tried creating a new library and I get the same problem.
    Just tried uploading an MP4 file and I get the same problem.
    I'm not sure what you mean by "When you uploaded the file, did you choose the content type as Video?" I use drag and drop or the Upload button and I am not prompted for a content type. The default content type is Video and I can't change the content
    type to video on the file that does actually play the video. The other file is a video content type but does not play.
    Sorry this is all very confusing I'm sure.
    I know I've done something to mess the site settings us when I fooled with Document Set's but exactly what I did and how to fix I know not.
    Thanks again for your help.

  • I can't add files into the library!

    For some reason i cannot add files or maps in the music library of itunes, when i click "add a file to the library" and i choose a music file(for example .mp3 or .m4a) it just doesn't show in the library so i cannot play anything in this program,
    i tried on another laptop with vista and there where no problems at all!!
    anyone knows a suggestion?

    I'm also having similar problems on my parents Vista machine.
    When an audio CD is inserted iTunes recognizes it, but once I try to play a track or import the CD iTunes goes through each track in about 1-2 seconds time, says that its done importing when it hasnt actually done anything. I uninstalled iTunes and downloaded a new fresh copy and the problem keeps happening. I ran the iTunes diagnostics tool on my Optical Drive and everything checks out. I opened up Windows Media Player and was able to rip audio tracks from the cd that way and was able to import the WMP ripped WMAs into iTunes, but this is too many steps for my parents to do (using iTunes alone is almost too many steps).

  • Adding files to the library

    I have a few things I've recorded myself and some other audio I would love to use to expand my Soundtrack Pro library. What's the proper way (if there is one) to add files to the library so they show up in the application's library? Sorry if this has been asked before. I tried searching for the question in a few different ways. Thanks in advance.

    OKay, I just came across a question someone had about moviny their library and I realized the way they did it is also the way to add directories, so I indirectly got my answer.

  • Errore massage when trying to import file to the library

    Do anyone knows why this massage pops when I'm trying to import file to the library?
    "Attempting to copy to the disk "Data1" Failed. You do not have enough access privileges for this operation."

    Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

  • How do I get iTunes to accept FLAC files into the library?

    If I want to use iTunes to catalog FLAC files (but NOT play them...as I use my logitech Squeezebox fior that) how do I get iTunes to accept FLAC files into the library?

    As polydorus notes, iTunes has the huge shortcoming of not handling FLAC. 
    There are plugins that allow iTunes to play FLAC, but everything I've seen says they are problematic. 
    A much better approach is to get a 3rd party conversion program such as Switch and convert the FLAC files to an iTunes-compatible format such as  AAC or AIFF.
    Put the converted files in your iTunes library, and keep the original FLACs on hand for when you are using a more capable player.

Maybe you are looking for