SharePoint 2010 Patching
I have SharePoint 2010 with Project server 2010. Please confirm if I install SP2 for Project server it will also contain SP2 for SharePoint.
Below is link
http://support.microsoft.com/kb/2687452
Yes, it contains both.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Manual Running of PSCONFIG after Installing SharePoint 2010 Patches FAILS
On SBS2011, having run:
1. Open an Administrative command prompt.
2. Change directory to C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN
3. Run PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
We get the same errors as numerous others on stage 5 of 6:
An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown.
Additional exception information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
And the following from the bottom of the ~1MB log file:
07/27/2014 14:45:07 1 INF Entering function TaskDriver.Stop
07/27/2014 14:45:07 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:07 1 INF Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
07/27/2014 14:45:07 1 INF Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order
for this product to operate properly. To diagnose the problem, review the extended error information located at {0}, fix the problem, and run this configuration wizard again.
07/27/2014 14:45:07 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:07 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review
the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_44_32_814_2083894735.log, fix the problem, and run this configuration wizard again.
07/27/2014 14:45:07 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:07 1 INF Resource id to be retrieved is PostSetupConfigurationFailedUserMessage for language English (United States)
07/27/2014 14:45:07 1 INF Resource retrieved id PostSetupConfigurationFailedUserMessage is Configuration of SharePoint Products failed. Configuration must be performed before
you use SharePoint Products. For further details, see the diagnostic log located at {0} and the application event log.
07/27/2014 14:45:07 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:07 1 INF Entering function TaskDriver.OnTaskDriverStop
07/27/2014 14:45:07 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, Configuration of SharePoint Products
failed. Configuration must be performed before you use SharePoint Products. For further details, see the diagnostic log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_44_32_814_2083894735.log
and the application event log.
07/27/2014 14:45:07 1 INF Entering function TaskDriverStateChange.Enter
07/27/2014 14:45:07 1 INF Acquiring the writer lock to change the state
07/27/2014 14:45:07 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
07/27/2014 14:45:07 1 INF Changed state of the task driver to neverrun
07/27/2014 14:45:07 1 INF Released the writer lock to change the state
07/27/2014 14:45:07 1 INF Leaving function TaskDriverStateChange.Enter
07/27/2014 14:45:07 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:07 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:07 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message Configuration
of SharePoint Products failed. Configuration must be performed before you use SharePoint Products. For further details, see the diagnostic log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_44_32_814_2083894735.log
and the application event log.
07/27/2014 14:45:07 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:07 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:07 1 INF Leaving function TaskDriver.OnTaskDriverStop
07/27/2014 14:45:07 1 INF Leaving function TaskDriver.Stop
Have followed the suggestions re clearing cache, starting the timer service, etc., but not joy.
What could be the cause? Thanks!!!
PS It's broken the backup too, but I understand that's "normal"... :o/Hi Jason - thanks for your reply.
I was under the impression that this manual task had to take place post the SP patches/service pack? (there's much talk of it on the net to do this).
I will try your command though!
Thanks! :o)
There's some more info in the log (it is large - less verbose would have been handy!):
07/27/2014 14:45:27 13 INF Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
07/27/2014 14:45:27 13 INF Setting the upgrade mode to inplace
07/27/2014 14:45:27 13 INF Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
07/27/2014 14:45:27 13 INF Creating security token service application for this farm ...
07/27/2014 14:45:27 13 INF Successfully created security token service application
07/27/2014 14:45:27 13 INF Creating service connection point for this farm ...
07/27/2014 14:45:27 13 WRN Failed to add the service connection point for this farm
07/27/2014 14:45:27 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:27 13 INF Resource id to be retrieved is ServiceConnectionPointNotCreatedEventLog for language English (United States)
07/27/2014 14:45:27 13 INF Resource retrieved id ServiceConnectionPointNotCreatedEventLog is Unable to create a Service Connection Point in the current Active Directory
domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
07/27/2014 14:45:27 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:27 13 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and
that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=hjplondon,DC=local doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
07/27/2014 14:45:33 13 ERR Task upgrade has failed with an unknown exception
07/27/2014 14:45:34 13 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed. ---> System.ComponentModel.Win32Exception:
HJPLONDON\spwebapp
at Microsoft.SharePoint.Win32.SPAdvApi32.LookupAccountName(String strAccountName, String& strDomainName, SID_NAME_USE& sidUse)
at Microsoft.SharePoint.Win32.SPAdvApi32.LsaAddAccountRights(String strAccountName, String strUserRight)
at Microsoft.SharePoint.Administration.SPProvisioningAssistant.AddLaunchOnBehalfOfPrivileges(String userName)
at Microsoft.SharePoint.Upgrade.EnsureAppPoolsHaveLaunchOnBehalfPriviliges.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
--- End of inner exception stack trace ---
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
at Microsoft.SharePoint.Upgrade.SPManager.InplaceUpgradeAdministrationWebApplication()
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. Additional exception information: {1}
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionInformation
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. Additional exception information:
{1}
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionInformation
07/27/2014 14:45:34 13 ERR An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown. Additional exception information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence
failed.
Microsoft.SharePoint.Upgrade.SPUpgradeException: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed. ---> System.ComponentModel.Win32Exception: HJPLONDON\spwebapp
at Microsoft.SharePoint.Win32.SPAdvApi32.LookupAccountName(String strAccountName, String& strDomainName, SID_NAME_USE& sidUse)
at Microsoft.SharePoint.Win32.SPAdvApi32.LsaAddAccountRights(String strAccountName, String strUserRight)
at Microsoft.SharePoint.Administration.SPProvisioningAssistant.AddLaunchOnBehalfOfPrivileges(String userName)
at Microsoft.SharePoint.Upgrade.EnsureAppPoolsHaveLaunchOnBehalfPriviliges.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
--- End of inner exception stack trace ---
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
at Microsoft.SharePoint.Upgrade.SPManager.InplaceUpgradeAdministrationWebApplication()
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionInformation
07/27/2014 14:45:34 13 INF Entering function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. Additional exception information:
{1}
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionMessage
07/27/2014 14:45:34 13 INF Leaving function Common.BuildExceptionInformation
07/27/2014 14:45:34 13 INF Entering function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key global
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found command global in collection
07/27/2014 14:45:34 13 INF Leaving function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key initialize
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found command initialize in collection
07/27/2014 14:45:34 13 INF Leaving function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key SINGLESERVER
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found parameter SINGLESERVER in collection
07/27/2014 14:45:34 13 INF Leaving function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key upgradesessionid
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found parameter upgradesessionid in collection
07/27/2014 14:45:34 13 INF Leaving function Command.this[string key]
07/27/2014 14:45:34 13 INF Releasing the farm upgrade lock in common exception handler.
07/27/2014 14:45:34 13 INF Entering function UpgradeBootstrapTask.BuildUpgradeExtendedMessage
07/27/2014 14:45:34 13 INF Task result is fail
07/27/2014 14:45:34 13 INF Leaving function UpgradeBootstrapTask.BuildUpgradeExtendedMessage
07/27/2014 14:45:34 13 INF Entering function TaskBase.OnTaskStop
07/27/2014 14:45:34 13 INF Creating the OnTaskStop event for task upgrade
07/27/2014 14:45:34 13 ERR Task upgrade has failed
07/27/2014 14:45:34 13 INF friendlyMessage for task upgrade is An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown. Additional exception
information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
07/27/2014 14:45:34 13 INF debugMessage for task upgrade is An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown. Additional exception
information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
Microsoft.SharePoint.Upgrade.SPUpgradeException: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed. ---> System.ComponentModel.Win32Exception: HJPLONDON\spwebapp
at Microsoft.SharePoint.Win32.SPAdvApi32.LookupAccountName(String strAccountName, String& strDomainName, SID_NAME_USE& sidUse)
at Microsoft.SharePoint.Win32.SPAdvApi32.LsaAddAccountRights(String strAccountName, String strUserRight)
at Microsoft.SharePoint.Administration.SPProvisioningAssistant.AddLaunchOnBehalfOfPrivileges(String userName)
at Microsoft.SharePoint.Upgrade.EnsureAppPoolsHaveLaunchOnBehalfPriviliges.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
--- End of inner exception stack trace ---
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
at Microsoft.SharePoint.Upgrade.SPManager.InplaceUpgradeAdministrationWebApplication()
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
07/27/2014 14:45:34 13 INF Entering function TaskBase.FireTaskStateChanged
07/27/2014 14:45:34 13 INF Firing the OnTaskStateChanged event for task upgrade
07/27/2014 14:45:34 13 INF Entering function TaskDriver.TaskStateEventHandler
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is UpgradeTaskDisplayName for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id UpgradeTaskDisplayName is upgrade SharePoint Products
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Received an TaskStateEventHandler event. task:upgrade TaskBase.State:stopped
07/27/2014 14:45:34 13 INF Entering function TasksQueue.IncrementTaskFailed
07/27/2014 14:45:34 13 INF Incremented the number of tasks failed to 1
07/27/2014 14:45:34 13 INF Leaving function TasksQueue.IncrementTaskFailed
07/27/2014 14:45:34 13 INF Task upgrade has stopped and failed. Total failed is now 1
07/27/2014 14:45:34 13 INF Leaving function TaskDriver.TaskStateEventHandler
07/27/2014 14:45:34 13 INF Entering function CommandLine.TaskStateEventHandler
07/27/2014 14:45:34 13 INF Received an TaskStateEventHandler event. task:upgrade TaskBase.State:stopped
07/27/2014 14:45:34 13 INF Task upgrade has stopped and failed. Total failed is now 1
07/27/2014 14:45:34 13 INF Entering function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key initialize
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found command initialize in collection
07/27/2014 14:45:34 13 INF Leaving function get CommandCollection.this[string key]
07/27/2014 14:45:34 13 INF Entering function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found value in collection for key wait
07/27/2014 14:45:34 13 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 13 INF Found parameter wait in collection
07/27/2014 14:45:34 13 INF Leaving function Command.this[string key]
07/27/2014 14:45:34 13 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Resource id to be retrieved is UpgradeTaskFailConfigSyncDisplayLabel for language English (United States)
07/27/2014 14:45:34 13 INF Resource retrieved id UpgradeTaskFailConfigSyncDisplayLabel is Failed to upgrade SharePoint Products.
07/27/2014 14:45:34 13 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 13 INF Last message from task upgrade is An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown.
Additional exception information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
07/27/2014 14:45:34 13 INF Leaving function CommandLine.TaskStateEventHandler
07/27/2014 14:45:34 13 INF Leaving function TaskBase.FireTaskStateChanged
07/27/2014 14:45:34 13 INF Leaving function TaskBase.OnTaskStop
07/27/2014 14:45:34 13 INF Leaving function TaskThread.ExecuteTask
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is UpgradeTaskDisplayName for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id UpgradeTaskDisplayName is upgrade SharePoint Products
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
07/27/2014 14:45:34 1 INF Entering function get CommandCollection.this[string key]
07/27/2014 14:45:34 1 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 1 INF Found value in collection for key initialize
07/27/2014 14:45:34 1 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 1 INF Found command initialize in collection
07/27/2014 14:45:34 1 INF Leaving function get CommandCollection.this[string key]
07/27/2014 14:45:34 1 INF Entering function Command.this[string key]
07/27/2014 14:45:34 1 INF Entering function CommandCollectionBase.Get
07/27/2014 14:45:34 1 INF Found value in collection for key wait
07/27/2014 14:45:34 1 INF Leaving function CommandCollectionBase.Get
07/27/2014 14:45:34 1 INF Found parameter wait in collection
07/27/2014 14:45:34 1 INF Leaving function Command.this[string key]
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is UpgradeTaskFailConfigSyncDisplayLabel for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id UpgradeTaskFailConfigSyncDisplayLabel is Failed to upgrade SharePoint Products.
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.Upgrade.SPUpgradeException was thrown. Additional exception information: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed.
Microsoft.SharePoint.Upgrade.SPUpgradeException: Action 4.0.13.0 of Microsoft.SharePoint.Upgrade.SPServerSequence failed. ---> System.ComponentModel.Win32Exception: HJPLONDON\spwebapp
at Microsoft.SharePoint.Win32.SPAdvApi32.LookupAccountName(String strAccountName, String& strDomainName, SID_NAME_USE& sidUse)
at Microsoft.SharePoint.Win32.SPAdvApi32.LsaAddAccountRights(String strAccountName, String strUserRight)
at Microsoft.SharePoint.Administration.SPProvisioningAssistant.AddLaunchOnBehalfOfPrivileges(String userName)
at Microsoft.SharePoint.Upgrade.EnsureAppPoolsHaveLaunchOnBehalfPriviliges.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
--- End of inner exception stack trace ---
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
at Microsoft.SharePoint.Upgrade.SPManager.InplaceUpgradeAdministrationWebApplication()
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
07/27/2014 14:45:34 1 INF Entering function TaskDriver.NotifyTaskSummary
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is TotalTasksRan for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id TotalTasksRan is Total number of configuration settings run: {0}
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalran, TaskDriverEventArgs.EventType.notify,
message: Total number of configuration settings run: 5
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Total number of configuration settings run: 5
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is TotalTasksSucceeded for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id TotalTasksSucceeded is Total number of successful configuration settings: {0}
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalsuccess, TaskDriverEventArgs.EventType.notify,
message: Total number of successful configuration settings: 4
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Total number of successful configuration settings: 4
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is TotalTasksFailed for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id TotalTasksFailed is Total number of unsuccessful configuration settings: {0}
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalfail, TaskDriverEventArgs.EventType.notify,
message: Total number of unsuccessful configuration settings: 1
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Total number of unsuccessful configuration settings: 1
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverNotify
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.NotifyTaskSummary
07/27/2014 14:45:34 1 ERR One or more configuration tasks has failed or some tasks were not run
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is PostSetupConfigurationStoppingSucceeded for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id PostSetupConfigurationStoppingSucceeded is Successfully stopped the configuration of SharePoint Products.
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverStopping
07/27/2014 14:45:34 1 INF Sending a task driver stopping event: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType.stopping, Successfully stopped the configuration
of SharePoint Products.
07/27/2014 14:45:34 1 INF Entering function TaskDriverStateChange.Enter
07/27/2014 14:45:34 1 INF Acquiring the writer lock to change the state
07/27/2014 14:45:34 1 INF Current state of the task driver is neverrun. You want to change it to stoppingrun
07/27/2014 14:45:34 1 INF Changed state of the task driver to neverrun
07/27/2014 14:45:34 1 INF Released the writer lock to change the state
07/27/2014 14:45:34 1 INF Leaving function TaskDriverStateChange.Enter
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType stopping, message
Successfully stopped the configuration of SharePoint Products.
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverStopping
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.ExecuteTasks
07/27/2014 14:45:34 1 ERR One or more configuration tasks has failed to execute
07/27/2014 14:45:34 1 INF Entering function TaskDriver.Stop
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order
for this product to operate properly. To diagnose the problem, review the extended error information located at {0}, fix the problem, and run this configuration wizard again.
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review
the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_45_17_500_877544068.log, fix the problem, and run this configuration wizard again.
07/27/2014 14:45:34 1 INF Entering function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Resource id to be retrieved is PostSetupConfigurationFailedUserMessage for language English (United States)
07/27/2014 14:45:34 1 INF Resource retrieved id PostSetupConfigurationFailedUserMessage is Configuration of SharePoint Products failed. Configuration must be performed before
you use SharePoint Products. For further details, see the diagnostic log located at {0} and the application event log.
07/27/2014 14:45:34 1 INF Leaving function StringResourceManager.GetResourceString
07/27/2014 14:45:34 1 INF Entering function TaskDriver.OnTaskDriverStop
07/27/2014 14:45:34 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, Configuration of SharePoint Products
failed. Configuration must be performed before you use SharePoint Products. For further details, see the diagnostic log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_45_17_500_877544068.log
and the application event log.
07/27/2014 14:45:34 1 INF Entering function TaskDriverStateChange.Enter
07/27/2014 14:45:34 1 INF Acquiring the writer lock to change the state
07/27/2014 14:45:34 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
07/27/2014 14:45:34 1 INF Changed state of the task driver to neverrun
07/27/2014 14:45:34 1 INF Released the writer lock to change the state
07/27/2014 14:45:34 1 INF Leaving function TaskDriverStateChange.Enter
07/27/2014 14:45:34 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Entering function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message Configuration
of SharePoint Products failed. Configuration must be performed before you use SharePoint Products. For further details, see the diagnostic log located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_7_27_2014_14_45_17_500_877544068.log
and the application event log.
07/27/2014 14:45:34 1 INF Leaving function CommandLine.TaskDriverEventHandler
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.OnTaskDriverStop
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.Stop
07/27/2014 14:45:34 1 INF UnLocking the task driver for exclusive use while we ran tasks
07/27/2014 14:45:34 1 INF Leaving function TaskDriver.Run
07/27/2014 14:45:34 1 ERR Post setup configuration was not run successfully when using the command line task driver module
07/27/2014 14:45:34 1 INF Leaving function PsconfigCommandLineMain.Mainn -
Upgrading both SharePoint 2010 server and DB server with latest available patch
We have 2 servers in the farm ( SharePoint server and Database server)
We are planning to patch the database server and SharePoint server as well at the same time.
For this activity I have found some ways :
Way 1:
First I will do the patching in SP server and run the configuration wizard.
Once it's finished , I will shutdown the SP server.
Start patching in SQL server
After done in Sql server , I will restart the SP server.
Way 2:
First I will do the patching in SP server and run the configuration wizard.
Once it's finished , I will disconnect the SP server from SQL server by using the configuration wizard.
Start patching in SQL server
After done in Sql server , I will reconnect both the server's.
Way 3:
I don't follow any one of the above ways. Simply patch both the server's one by one (Here might be, when we do the DB server patch upgrade database connection failed entries will be track into event viewer because of DB server unavailability )
Here my questions are :
If disconnect the server's from each other , can I reestablish the connection again ?? Is there that option ???
Is it compulsory to disconnect / shutdown the SP server while patching in DB server ???????
Suppose I don't follow any of the above way , cause any issues ?????
If any DB connection related entries will track into Event Viewer, is this cause any issues ?????
Any suggestions would be appreciated.
RameshNKPatching order will not matter. You also do not necessarily have to shutdown SharePoint while patching SQL. Yes, SharePoint will throw errors in the Event Log and ULS log.
I might suggest patching SQL Server first, simply because it is quick and in my experience, "safe". That is, the patching process works and works well. It is unlikely you'll come out with an unserviceable SQL Server instance.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How to Restore a SharePoint 2010 Sitecollection from Prod to Pre-Prod?
How to Restore a SharePoint 2010 Sitecollection from Prod to Pre-Prod?
The patching levels are different from each environment.
Tools installation is same.
Note: Suggest me to restore a site from site template without content.
If you have any better approach please tell me.
Many Thanks,
MadhuHi Madhu,
It isn't possible (out of the box) to restore a production to a development site without the content.
If you're happy with restoring the content, it's quite easy to backup a SharePoint farm and then restore only a site (form the farm backup) to a development farm.
Have a look at these forum posts for more info (in the first link, I gave an example script):
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f5e8165e-2fe1-4ca9-87bd-b0f45b1e0091/process-on-creating-a-uat-server-from-live?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8092c04f-ae2c-4cfa-8933-e7ecb3138fdf/how-to-backup-and-restore-a-site-along-with-its-corresponding-user-profile-data?forum=sharepointgeneralprevious
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos -
Workflow stuck in starting state after applying SharePoint 2010 CU December 2012
I have custom visual studio workflow which are associated with Custom content type. workflow gets triggered automatically when a file is uploaded to SharePoint. Everything was working fine till when i apply the following CU
http://blogs.msdn.com/b/joerg_sinemus/archive/2012/12/27/sharepoint-2010-and-december-2012-cu.aspx
After applying this my workflow get stuck in "Starting" state.
No error were logged in 14 hive logs.
Thanks in Advance!It took me a while but I came up with a work around. There is a PowerShell script below that can be used to trigger the workflow. Hopefully this will hold all of us over until the official fix arrives.
First remove the auto start on change or new from the affected workflow
Edit the script below to match your environment
Add the script to Windows task scheduler with the PowerShell.exe in the command line
This assumes PowerShell.exe is in the path
Then add the full path and script name in the add arguements text box
Script:
#The purpose of this script is to start the SPD workflow with the windows task scheduler for a trigger
#This should avoid the check in-out issue caused by the December 2012 SP CU patch
#This needs to be run on an account with membership in the farm administration group for SharePoint and Shell in SQL
#You can use a find and replace to replace the server and other names with your actual names
#There are no status messages being used since this will be a scheduled task in the Windows task scheduler
#Add SharePoint modules and create variable space
add-pssnapin microsoft.sharepoint.powershell
start-spassignment -global
#Open the web site, list and the workflow
$site=get-spsite %site url%"
$web=get-spweb %Web url%
#Open the %affected% library or list and workflow association
$%affected%=$web.getlist("%affected%")
$manager=$site.workflowmanager
$culture=[system.globalization.cultureinfo]::currentculture
$wfname="%affected workflow name"
$association=$%affected%.workflowassociations.getassociationbyname($wfname,$culture)
$data=$association.associationdata
$wfrunoption=[microsoft.sharepoint.workflow.spworkflowrunoptions]::synchronous
#Start workflow
foreach ($item in $%affected%.items) {
$site.workflowmanager.startworkflow($item,$association,$data,$wfrunoption)
stop-spassignment -global -
SharePoint 2010 100% cpu w3wp.exe after windows server update desember 2013
Hi
Using SharePoint 2010 with 2 frontend webservers and 1 appserver:
Our ApplicationPool for our portal workerprocess has for a second time gone up to and stuck on 99% CPU on one of our 2 frontend webservers.
What happens is that this server falls out of the NLB cluster, and the only way to get it back is to log onto the server and through task manager stop the worker process (w3wp). We checked to see what the applicationPool was, and it was for the portal site.
The first time it happened was just after the installation of the following windows server patches: Actuall on the very same day. The patches were installed on the early morning of the 18th december 2013.
The event id for the spesific events show:
18.12.2013 14:45 Event id 7011, Service Control manager:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service.
and
09.01.2014 08:36 Event id 7011 Service Control Manager
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
In adition there are a lot of random:
Event id 105, Warning: NLB:
NLB cluster []: Timer starvation has been detected. This might be due to a denial of service attack or a very high server load. During this period, some connections might fail. If this problem recurs frequently, analyze the threat and take appropriate measures
and/or add more servers to the cluster. An informational event log entry will be logged when the attack has subsided.
I'm suspecting that this was caused because of one of the updates, allthough the "Event id 105", Warning: NLB did exist prior to the patch updates, but would only appear once every 2-3 weeks. After December 18 2013 these "Event id 105"
messages appear about 6-11 times a day!
any one seen something like it?
I see microsoft: http://support.microsoft.com/kb/922918/eng
Event 7011, has a workaround to increase the default time-out value for the service to for example 60 seconds instead of 30. Would this be a good solution?
brgs
BjornHi ,
For the temp solution u can do app pool recycle or iisreset when the cpu usage goes 100%.
And check which worker processor is consuming that much memory and checked related to that web application.
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful. It'll help other users who are visiting your thread for the similar problem. -
Need to Upgrade Sharepoint 2010 to SP2- advise!
Hello All,
I do not work on SharePoint services much, basic operations only. I am entitled to upgrade the SP application and backend SQL in order to make it compatible with our Backup Solution (Symantec Backup Exec 2014).
We got 2 servers, one is running the SharePoint 2010 application (v 14.0.5136.5002), and another is running the MS SQL Server (SQL V10.0.2531.0) for database.
We want to upgrade 1) SP from v 14.0.5136.5002 into Service Pack 2 (14.0.7015.1000)
2) SQL from (SQL V10.0.2531.0) into SP3 (10.0.5500.0).
I am referring to following threads for version sequence and downloads, apparently correct and helpful-
SP: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=224
SQL: http://sqlserverbuilds.blogspot.com/
My question is, 1) while upgrading which one to go first - Sharepoint App server or SQL server? What's the best Sequence?
2) Can I upgrade SP and SQL from current version to the mentioned version, by directly downloading and
installing those versions? Or I have to deploy any hotfixes/patches prior to that release from the current one?
Thanks for any advises.
Insaf MuhammedHI Muhammad,There is no Sequence for SQL,SP.we can do first SQL and next SP.please find the details below for Sp-Sp2 and SQL.You can find all the latest updates and patches in Cumulative update in post categories.
http://expertsharepoint.blogspot.de/2013/10/detailed-sharepoint-2010-sp2.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/
Thank you very much Mr. Anil for the advise and SP link!
Great article for SP SP2 upgrade with screenshots. So as I understand I can go ahead and install SQL SP3 and SP SP2 downloads on top of current releases I have and everything should be OK!
I couldn't see the SQL SP3 deployment part around, could you post if you got one?
Thanks a lot :)
Insaf Muhammed -
Vulnerabilities reported in sharepoint 2010 from IBM App Scan - Blind SQL Injection
Hi - We have been reportecd the following vulnetabilities in sharepoint 2010 by IBM App scan tool. We have verified that all latest security patches are installed in the server. The sharepoint implementation is only out-of-the-box. We ahve installed the
product and created a site collection with windows authentication - without any customization. Can someone pls let us nkow what is the security patch that is required - or any other fix applicable?
Authentication Bypass Using SQL Injection
Blind SQL Injection
HTTP PUT Method Site DefacementHi,
Please understand we have no sufficient resource and information to analyze the result from third party tool. I searched on Internet and found a related article, please refer to the 9<sup>th</sup> tip. I’d suggest you contact their support engineer for more
professional assistance.
http://www-01.ibm.com/support/docview.wss?uid=swg21301935
In addition, here is an article for best practices in SharePoint 2013, there are also some tools recommended by Microsoft. For your reference:
http://social.technet.microsoft.com/wiki/contents/articles/12438.sharepoint-2013-best-practices.aspx
Regards,
Rebecca Tu
TechNet Community Support -
hi All,
Our Browser based Infopath forms have slowed down drastically after applying SharePoint 2010 SP2. Prior to this, we had SharePoint 2010 SP1 and the timings was around 10 seconds (single user) for the entire infopath form to be displayed which has 10-12
views and 5 data connections and 15 business rules and around 100 fields.
But now after applying sharepoint 2010 sp2, the performance has slowed down and it now takes for a single user around 50 seconds.
Refer to the link below, which we followed by applying the patch as well, but the performance is still the same very slow.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0b673324-01c4-49f7-86cb-647aa43fefd6/infopath-browser-forms-extremely-slow-after-service-pack-2-upgrade?forum=sharepointadminprevious
We have raised a ticket with Microsoft, but there is no concrete resolution as to what component of the infopath has made the form rendering and display slow.
Can someone point me to the right resource or knowledge base where i can do a kind of debug, which tells me exactly which infopath dlls are the issue or which part of my form is taking more time. I am using AOLPageTest and Fiddler, but they do not give me
any details where exactly is the bottleneck.
Any tools that give me the details of the bottleneck.
Thanks and appreciate your help in this.
Regards
Ram
Thanks Ramhi inderjeet,
The application has gone live and its on production, the same application is on pre-prod and UAT, system testing and integration environments.
The infopath form used to work very well on all these environments before we installed sharepoint 2010 sp2. but the moment we installed sharepoint 2010 sp2, the infopath forms have slowed down.
Microsoft has acknowledged that there is an issued with sharepoint 2010 sp2 and infopath form performance, but they are not able to provide an appropriate fix on this.
We have another environment where there is no sharepoint 2010 sp2 applied only sp1 is applied and the infopath form works very well within fraction of seconds.
So your point no. 1 and 2 and 3. does not reveal anything. Fiddler does not give any detailed component by component breakup where the time is taking more.
The form used to work very well before we applied sp2.
I want to know a tool that gives me exactly component by component grant chart kind of breakup of time taken when the infopath url is requested on the browser.
Thanks
ram
Thanks Ram -
Exporting SharePoint 2010 sub site to different domain/farm.
Hi,
On my SharePoint 2010 Enterprise development VM I am building a sub site with nintex workflow and infopath form functionality. At some point it will be necessary to export this sub site (Export -SPWeb) from my dev VM to a UAT server and finally a production
server (the UAT and Production servers will have an AD trust relationship between them but my VM has a test contoso AD configured, i.e. a completely different DC) within different SharePoint 2010 Enterprise farms. Are my only concerns:
The SQL Server versions must match
The SharePoint product and patches must match
The nintex workflows can be deployed using the nintex command line
Or am I being nieve?
Thanks.i think this is if you are using the Nintex workflows, then you need to run this command before
NWAdmin.exe -o PrepareSiteForExpor
and after import run
this
NWAdmin
–o fixsiteafterimport
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
SharePoint 2010 Picture library issue, stuck in uploading
We have created Picture Library in SharePoint 2010 publishing website. It was working fine before, but
now we are unable to upload any picture (even the file size is less than 1 MB).
On the upload form, we select the picture and click on Ok button. Then it stuck and continue showing message, Please
wait while your changes are processed
It doesn't show any error, and keeps uploading....
It seems something is wrong on farm level, i can not upload picture in any web application but documents.
Any kind of help would be appreciated.FYI - below patches went in March 2015, facing symptoms described in article shared by you;
Security Update for Microsoft .NET Framework 4 on Windows Server 2003, Vista, Windows 7, Server 2008, Server 2
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x64
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x64
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x64
Security Update for Microsoft .NET Framework 4 on Windows Server 2003, Vista, Windows 7, Server 2008, Server 2
Security Update for Microsoft .NET Framework 4 on Windows Server 2003, Vista, Windows 7, Server 2008, Server 2
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x64
Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x64
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x64
Security Update for Microsoft .NET Framework 4 on Windows Server 2003, Vista, Windows 7, Server 2008, Server 2
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x64
Security Update for Microsoft .NET Framework 4 on Windows Server 2003, Vista, Windows 7, Server 2008, Server 2
Security Update for Windows Server 2008 x64 Edition (KB2991963)
Security Update for Windows Server 2008 x64 Edition (KB2993651)
Security Update for Windows Server 2008 x64 Edition (KB2993958)
Security Update for Windows Server 2008 x64 Edition (KB2998579)
Security Update for Windows Server 2008 x64 Edition (KB3000483)
Security Update for Windows Server 2008 x64 Edition (KB3003743)
Security Update for Windows Server 2008 x64 Edition (KB3004361)
Security Update for Windows Server 2008 x64 Edition (KB3005607)
Security Update for Windows Server 2008 x64 Edition (KB3006226)
Security Update for Windows Server 2008 x64 Edition (KB3010788)
Security Update for Windows Server 2008 x64 Edition (KB3011780)
Security Update for Windows Server 2008 x64 Edition (KB3013455)
Security Update for Windows Server 2008 x64 Edition (KB3014029)
Security Update for Windows Server 2008 x64 Edition (KB3021674)
Cumulative Security Update for Internet Explorer 8 for Windows Server 2008 x64 Edition (KB3021952)
Security Update for Windows Server 2008 x64 Edition (KB3022777)
Security Update for Windows Server 2008 x64 Edition (KB3023562)
Security Update for Windows Server 2008 x64 Edition (KB3029944)
Ramakrishna Pulipati SharePoint Consultant, Bangalore, INDIA -
Unable to open Office files on SharePoint 2010 sites on Windows Server 2008 R2
Setup: Windows SharePoint Server 2010 sp1 on Windows Server 2008 R2 (hosted on VMWare VSphere ESXi 5.1)
Secured using Domain SSL from GlobalSign.
Client OS: Windows 7 Professional 32bit & Windows XP SP3 32 bit
Browsers: IE10, IE9,IE8
Office: Office 2010, Office 2010 sp2 (both 32bit), Office 2007
Problem Description: Only recently, users started having issues with opening Office files (Word, Excel) on SharePoint sites. When you click on an Office file e.g. Word Document, it comes up with the option to select "Ready only" or "Edit"
and choosing either options and re-entering the login credentials results in the
application hanging. If you leave it for a while (about 5 minutes) sometimes the file opens and other times it gives the error "Could not open https://portal.com/XXX/XXX/Document.docx". Even when it opens, it's extremely
sluggish and can't do anything other than end it via Task Manager. Same with excel files.
This happens to all the users all different OS and browsers.
On XP Pro SP3 w/ IE8, when you click on the file, the login prompt keeps popping back up repeatedly and if you click cancel, the file loads up anyway but no way of saving back onto the SharePoint site.
IMPORTANT: One exception is when logged in as a Site Collection Administrator, it
works like a dream bizarrely!!!! Opens, Edits and saves back fine on the SharePoint site.
Have tried following:
1. Repaired Office 2010 Pro; Uninstalled/Re-installed Office 2010 Pro
2. Reset Browser, unticked automatically detect proxy settings.
3. Emptied OfficeOfflineCache on Client
4. Removed WebDAV from the SharePoint server
5. Added Antivirus folder exclusion (We use SEP 11) on the SharePoint Server
Note: PDF files opens fine for all users.
I would immensely appreciate if anybody has got any advice/pointers/suggestions. Desperately out of ideas at the moment.
regards,
Compter Sez No!Hi,
According to your description, When you try to open a Microsoft Office document from a SharePoint 2010 site in a client application, the document opens slowly and you are prompted to enter your credentials multiple times.
This issue may be because of SharePoint Web Front End (WFE) server(s) has Antivirus software installed and the exceptions are not set correctly.
I recommend to remove the antivirus software or set the correct permissions for the antivirus software to resolve the issue.
To configure the antivirus exceptions, please follow the guidelines in the below articles:
KB943620:
Folders to exclude when you perform a file-level antivirus scan on a server operating system.
KB952167:
Certain folders may have to be excluded from antivirus scanning when you use a file-level antivirus program in SharePoint.
KB943556:
Recommended file and folder exclusions for Microsoft Forefront Client Security or Forefront Endpoint Protection 2010.
Best regards.
Thanks -
Reporting Services 2012 in SharePoint 2010 - do I need to install SSRS on each server?
Have spent some time today setting up SSRS2012 with SP1 Business Intelligence Edition on our test SharePoint 2010 farm. The SharePoint farm is four servers (plus a database) - one of the application servers will host the SQL Server 2012 instance and
SSRS 2012.
I've installed SSRS 2012 on one of the servers in SharePoint mode, and seems to be configured correctly in Central Admin - can view the system settings, it reports that the SQL Server Agent is running, etc. I've also installed the SSRS 2012 SharePoint
Add-In on all servers. However, I'm getting the following error whenever I try to do anything with reports (such as deploying or running):
Name=Request (POST:http://sharepoint/reports/ReportService2010.asmx) System.Runtime.InteropServices.COMException: The file you are attempting to save or retrieve has been blocked from this Web site by
the server administrators.
Sure enough, if I try to connect to that ReportService2010.asmx URL in a browser, I get the same error. Note that http://sharepoint is NOT the server I installed SSRS on - this is a web front-end.
Can I assume that I need to install SSRS2012 (SharePoint integrated) on all SharePoint servers in the farm? Or is this another issue?You only need to install the Add-on for the additional servers. Have you configured the SSRS Service Application?
http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Dimitri Ayrapetov (MCSE: SharePoint) -
Reporting Services 2012 in SharePoint 2010 - SQL database edition?
We currently have a SharePoint 2010 farm, running on a SQL Server 2008 R2 Standard database. On one of the SharePoint 2010 servers, we have an instance of Reporting Services 2008 Enterprise running in SharePoint integrated mode. (We require Enterprise
for data-driven subscriptions)
We'd like to upgrade to Reporting Services 2012 for Data Alerts and a few other new features. However, I noticed something on
this blog stating that the SharePoint 2010 database server edition needs to match the Reporting Services edition. My concern is that I've not seen any official mention of this in Microsoft's documentation, and would like to avoid upgrading to Enterprise
for the SharePoint 2010 database if I can avoid it.
So, what I'd like to run is:
SharePoint 2010
SharePoint database: SQL Server 2008 R2 Standard
Reporting Services 2012 Enterprise
Reporting Services database: same as SharePoint database, so SQL Server 2008 R2 Standard
Is this possible? Or do I need to upgrade the SharePoint database to SQL Server 2008 R2 Enterprise?
Alternatively, could I install a separate database engine just for Reporting Services to host its databases (for example, SQL Server 2012 Enterprise), so I don't have to mess around with upgrading the SP database?While you don't need to upgrade your SQL 2008 R2 to 2012, you will need to install an instance of SQL 2012 & SSRS 2012. They can be side-by-side and independent of each other. The following blog post provides steps to do so,
http://www.madronasg.com/blog/how-configure-sql-server-reporting-services-2012-use-sharepoint-2010#.UuEVd2Ao74Y
Dimitri Ayrapetov (MCSE: SharePoint) -
Getting Prompt for Credentials When Opening InfoPath 2010 Form in Sharepoint 2010
I have a domain user who runs Office 2010 x32 and uses a Sharepoint 2010 site daily. Lately a specific page on that site has been randomly giving prompts for credentials when opening existing documents and creating new ones. The process can be most easily
replicated by opening the new document template in Infopath by going to Documents -> New in the ribbon bar of the SP page. Most of the time the Windows credentials for the user are passed to Infopath/Sharepoint automatically (which is normal), but on the
fourth or fifth attempt to create a new form, the prompt appears. The user can still enter the credentials and open the blank template form, but a prompt should not appear. The user is also the administrator for that page, so I'm thinking it's not a permissions
issue.
The user is running IE 9 on Windows 7 Pro x64. I have performed the following:
Reset advanced IE settings and all user cache data
Cleared cached Sharepoint credentials in Windows credential manager
Re-applied group policy for the machine using gpupdate /force
Logged in with a clean temporary profile
Logged in to another domain account using the user's Sharepoint credentials
Cleared Infopath cache
Re-installed Office 2010 x32
The problem only occurs only on this particular machine. There are no Sharepoint or authentication-related errors or warnings in the application and system event logs. There are also no error messages on-screen when the prompt appears. I also considered
the possibility of this being a performance related issue in the case that maybe Infopath was taking too long to start, causing the credential pass-through process to time out and fall back to a prompt. I ran disk cleanup, deleted some temporary files, and
checked for excessive CPU/memory load. I didn't find any issues and doing these things did not help.
I'm convinced there is another setting somewhere in Windows that is causing this. Interestingly it always happens after four or five attempts, never the first time. Can someone point me in the right direction?Hi Titan, this sounds like an IE security setting issue. Things to do:
1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
cameron rautmann
Maybe you are looking for
-
Xorg disables keyboard and mice [solved]
after last update I cant use the trackpoint and keyboard on my IBM T40 under x, only the touchpad works. here is my xorg.conf # File generated by xorgconfig. # Copyright 2004 The X.Org Foundation # Permission is hereby granted, free of charge, to any
-
When I download a .pps file, I can open it from the downloads and everything is great. But if I try to download another one, then I can no longer access the previous download from the download bar. This is very annoying to me as I download and open d
-
I can't redeem a gift from 9/13/10 in itunes--don't get a code. I just set up my itunes account and downloaded a more recent gift.
-
Java 6 update 19 will not uninstall
I am trying to revert to update 17 because of the various errors I receive with update 19, as indicated in other topics. In the control panel, update does not uninstall for some reason. Any suggestions so that I can reinstall update 17. I am on Win 7
-
Internal order and Purchase order
Hi, I created an Internal order for one company code CC01, then I created a Purchase order for another company code CC02 in which I assigned the order of CC01, the system accept this without error ! Please how to restrict this assignement? that means