Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser

Hi Apple Team,
Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser. When I enter the user name and password the page is keep on loading it never completes the page load. I installed chrome browser on my  Ipad and opened my sharepoint windows authentication site it is working fine.
Device : IPad 2
OS     : IOS 7.0.6
Thanks,
Baskar

Hi Suhasini,
Please refer below links for your issues. It seems you are having problem with 32 bit and 64 bit component in office and IE.
http://howididit-sharepoint.blogspot.in/2012/04/datasheet-view-not-working.html
http://alpesh.nakars.com/blog/datasheet-view-does-not-work-in-sharepoint-2010/http://support.microsoft.com/kb/2266203
Thanks and Regards, Shailesh B. Davara

Similar Messages

  • YouTube is not working properly of my Safari. Can you help fix it?

    So for some reason YouTube is not working properly on my Safari. I don't know why but its normal for Chrome. Can anyone help me fix this? Here is what is happening.

    This looks like an emerging issue with YouTube. But, to make sure:
    1) Quit safari (command + q with it open)
    2) Open finder. Click on "go" on the top menu bar, then click on "go to folder." In the prompt that comes up, type in:
    ~/library
    3) Pull the caches folder to the trash. This will ask for your password
    4) Open Safari. Click "Safari" by the Apple logo, then click "reset safari." Make sure everything is selected, then reset safari.
    5) Try again.
    If that doesn't work, the resolution by someone else I was working with (see thread here) was:
    daMeeze wrote:
    I was able to access help topics in YT by not signing in. Massive numbers of ppl with same issue. Fixed by signing in and scrolling to bottom of page to "Something New" and trying out the Feather beta test. It sounds like a YT issue *whew*. THANK YOU for sticking with me :-)

  • Scrolling effects in Muse are not working properly with the Chrome browser at the moment.

    My scrolling effects in Muse are not working properly in the Chrome browser .I disabled any third party widgets to see if that was the problem but it wasn't. Safari and firefox presented my site perfectly but when it was opened in chrome the menu navigation bar will not stop moving uncontrollably jittering when the page is scrolled. Does anyone know what I can do to fix this? My site is danieltoruno01.businesscatalyst.com

    We are using Vertical spry menu bar features provided with Dreamweaver CS3.
    You are using Spry 1.4.
    The latest  version of the Adobe Spry Framework is 1.6.1, this is the same version  that ships with Dreamweaver CS4.
    When using Dreamweaver CS3 (uses Spry  1.4), it's wise to upgrade your files to the latest version. This can  easily be done using the Spry Updater that can be found here.
    If after that you still have problems, please come back here.
    Ben

  • Windows Network Shares do not work properly

    Ever since installing LEOPARD (now running 10.5.2) my network shares on our Windows server are not working properly. I can connect in the office via cifs:// and the share appears. I cannot copy a file to the share. I get the following message:
    "The operation cannot be completed because you do not have sufficient privileges for some of the items."
    There is an icon with a size of 0kb on the share, and if I try to open it or trash it, I get a message telling me it is in use by the MAC OS. I can open a file from the share, but if I try to save it back to the share or save from an application I get a "There has been a network file permission error."
    If I try to copy the file to my desktop. I get a message that tells me that I don't have permission.
    If I try to connect using https:// I get a username or password not valid message. Both of the connection methods worked BEFORE I installed LEOPARD. The install was a clean install, not an upgrade. I NEED to be able to access the shares for my work. The shares are on a server running Windows Server 2003 Service Pack 2.
    How can I solve this? I actually have administrator privileges on the server with my login credentials, but this does not seem to matter.

    Experiencing the same exact problems here. Brand new Mac Pro on a Windows 2003 Server network. Somehow I don't think it is any rights problems in my case, as I can create and erase folders (created by me or others), and the Mac writes the .DS_Store files to the server...
    However, if I try to copy a single file or a folder containing files to the server, I get only a 0k file (inside the folder if I copy a folder) and after a while an error message saying the same things William Colvin2 mentions above (not sufficient privileges).
    Everything I have read seems to indicate that there is huge problems with Leopard with regard to this, and if that is true, they need to be fixed ASAP. I think I've tried and tested all the possible "solutions" (disabling SMB digital signature, GPO policies, disabling IPv6...) but still no solution in sight.
    Can we get some info from Apple on this whether it's being worked on, or what we can do to SOLVE this problem? As far as I know, Windows 2003 Server hasn't changed in that respect recently, whereas OSX has gone from 10.4 Tiger to 10.5 Leopard...
    Any help with solving the problem is greatly appreciated, so feel free to respond with anything that might be helpful. I would also be interested in hearing from people who have HAD this problem, but has gotten them solved. And if so, what solved it for you.
    Thanks in advance.

  • Sharepoint 2010 "Choice filter" webpart is not working on Ipad.

    choice filter web part is not working on IPad. whenever we click on filter Icon it shows only loading.
    please refer below screenshot for better troubleshooting.
    Thanks & Regards,
    Rajiv Kumar
    Rajiv Kumar

    Hi,
    Could you provide more details about how the search service doesn’t work?
    Are the search service unable to be started in CA -> Application Management -> Manage services on server? Or did you find it not working when you did searching? If that is the case, could you provide the error about
    it?
    It would be helpful to solve this issue if you provide more details about the issue.
    Best Regards,
    Dean Wang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • My touch pad does not work only when using Safari browser. The screen was grey. Help!

    My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
    Someone please help.
    Thanks

    I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and delete cache, history and cookies.

  • Numbers forms not working properly on iPad

    Updated to ios7, and now when I create a spreadsheet and form in Numbers, the Form view doesn't work properly.  The cursor only appears in every other field - data can be entered in the fields where the cursor doesn't show, but you can't see it until you move to the next field.
    The program also crashes frequently now.

    Have the same problem - it has made numbers unusable.  Have uninstalled numbers, reset the forms and the same issues!
    I have now had to revert format to excel and use the excel app!
    Come on Apple - what's going on?

  • Windows 8.1 does not work with original iPad

    I have a new HP Split 13 x 2 machine.  I cannot get my original iPad to get recognized.  I'm pretty sure it worked just fine when I had only Windows 8, but I upgraded a few days after I got the machine and now when I plug it in I continually hear the sound it makes when a device is plugged in, but it sounds like its getting connected and then disconnected and it keeps doing that over and over.  I've reinstalled iTunes with no luck.  iTunes says 'iTunes could not connect to this iPhone.  An unknown error occurred (0xE8000084).  I have the latest drivers for both Windows, HP, and Intel.  Anythoughts?  It works just fine on my old HP laptop with Vista.

    Hi aclose26, welcome to the HP Forums. iTunes not recognizing iPad in Windows 8.1 seems common. This thread on Apple's forums has a lot of possible fixes. You should research this here:  windows 8.1 itunes wont recognize ipad
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Exchange 2010/2013 coexistence: OWA proxy not working properly ":-( Something went wrong"

    Hi
    Exchange 2010 users are NOT able to connect to their mailboxes when they go through exchange 2013 OWA address.  We get a message that says following ---> "Something went wrong"
    Following is our URL.  The address is pointing to 2013 CAS loadbalancer VIP.  Outlook anywhere is working fine.  What is going on?
    Important: All my exchange 2010 / 2013 URIs are the same as suggested by Microsoft (Owa, ecp, activesync, ews, autodiscover): --> mail.domain.com/XXX

    Hello Rawa,
    Can you log on Exchange 2010 OWA using its localhost address?
    Please make sure the intenralurl value is set to Exchange 2010’s local host name and set the Externalurl to Null.
    http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • "reopen all windows from last session" not working properly

    Sometimes I will hit a wrong tab and lose all the tabs and pages I am working on.  But when I hit "Reopen All Windows from Last Session" in History, I either get pages from months ago, or some nonsense that Apple is apparently trying to get me to buy.  All I want is my old work up.  How can I get them back quickly and easily (which is what I thought "Reopen All Windows..." was supposed to do)?

    Manual method
    Malware – Adware removal – Apple Support
    Or download this program which was written by Thomas Reed, a long time poster. The program will do the work for you which makes it easy. If you are uncertain about downloading programs, try the manual method.
    Malware Guide – AdwareMedic – 10.7 and higher

  • SharePoint 2013 Community members list is not working properly.

    Hello All,
    We have a community site at our office. It is having a discussion list which has almost 2000 discussion. The problem is the members who have raised questions or discussions should get added in community members list. But its not happening. There was only
    11 members were added. The remaining members are not there. So It is showing the wrong top contributors. I really weird due to this issue.
    Please help me.
    Gore T.Richard

    Hi Gore,
    Please try to use the following code to get the members count, then check whether it corrects or not.
    SPWeb web = SPContext.Current.Web;
    SPList Members = web.Lists.TryGetList("Community Members"));
    try
    SPQuery query = new SPQuery();
    query.Query = "<Where><Eq><FieldRef Name="MemberStatusInt"/><Value Type="Integer">1</Value></Eq></Where>";
    SPListItemCollection colection = Members.GetItems(query);
    int membersJoined = colection.Count
    catch (Exception)
    http://sharepoint.stackexchange.com/questions/76973/number-of-memebers-inside-my-community-site-is-wrong
    Or try to reactivate the "community feature" feature and activate "Site Feed" feature at site level.
    If this issue still exists, you can also try to update the latest CU for SharePoint 2013.
    http://blogs.technet.com/b/stefan_gossner/archive/2015/04/14/april-2015-cu-for-sharepoint-2013-has-been-released.aspx
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Cellular data not working on Chrome and Safari browser

    I have recently upgraded iOS 8 and facing many issues on my IPAD Air. Please help me how to resolve the issue.
    1. Safari and Chrome doesn't connect through Cellular data.
    2. Sometime out going message failed from inbuilt mailbox account.
    Thank You.

    When asking a question it is helpful to those who might reply if you provide information about the steps you've already tried to solve your problem. SInce I don't know those things I'll start with the first steps. Is Cellular Data turned on in Settings? If not turn it on. If it is on the try a reset of your iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.

  • My iMessage not working properly on iPad.

    I just got a new iPad to go with the iPhones that me and my wife have.  When I send a message using iMessage to her iPhone it show up as if she sent it to herself. When she replies it show up on my iPad/iPhone as if I sent it to myself, so all the correspondence show up on the right side in blue and the devices don't alert us that we received a message. Also when I message someone else using she gets that too like we are in a group chat (and we are not). Ideas?

    nah, you can double check settings>store if the common appleid is still there, that's the one that is used for the download in itunes store. You can have a different appleid for iMessage, and even a third one for iCloud if you wish!

  • Not working properly Computer Browser service in Windows Server 2012

    Good afternoon.
    Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
    Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
    all.
    Looked packet sniffer:
    Microsoft Windows Lanman Remote API Protocol 
    Entry Count: 70 
    Available Entries: 251
    So on Master Browser shows 251 computer, and the client 70.
    If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
    What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?

    More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
      Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
    - Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
      - DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
      - SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
         Rsv: (000000..)
         UL:  (......0.) Universally Administered Address
         IG:  (.......0) Individual address (unicast)
        EthernetType: Internet IP (IPv4), 2048(0x800)
    - Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
      - Versions: IPv4, Internet Protocol; Header Length = 20
         Version:      (0100....) IPv4, Internet Protocol
         HeaderLength: (....0101) 20 bytes (0x5)
      - DifferentiatedServicesField: DSCP: 0, ECN: 0
         DSCP: (000000..) Differentiated services codepoint 0
         ECT:  (......0.) ECN-Capable Transport not set
         CE:   (.......0) ECN-CE not set
        TotalLength: 168 (0xA8)
        Identification: 14025 (0x36C9)
      - FragmentFlags: 16384 (0x4000)
         Reserved: (0...............)
         DF:       (.1..............) Do not fragment
         MF:       (..0.............) This is the last fragment
         Offset:   (...0000000000000) 0
        TimeToLive: 128 (0x80)
        NextProtocol: TCP, 6(0x6)
        Checksum: 0 (0x0)
        SourceAddress: 10.44.46.101
        DestinationAddress: 10.44.44.14
    - Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
        SrcPort: 65372
        DstPort: NETBIOS Session Service(139)
        SequenceNumber: 1910965363 (0x71E70473)
        AcknowledgementNumber: 580319796 (0x2296FA34)
      - DataOffset: 80 (0x50)
         DataOffset: (0101....) 20 bytes
         Reserved:   (....000.)
         NS:         (.......0) Nonce Sum not significant
      - Flags: ...AP...
         CWR:    (0.......) CWR not significant
         ECE:    (.0......) ECN-Echo not significant
         Urgent: (..0.....) Not Urgent Data
         Ack:    (...1....) Acknowledgement field significant
         Push:   (....1...) Push Function
         Reset:  (.....0..) No Reset
         Syn:    (......0.) Not Synchronize sequence numbers
         Fin:    (.......0) Not End of data
        Window: 252 (scale factor 0x8) = 64512
        Checksum: 0x6F65, Disregarded
        UrgentPointer: 0 (0x0)
        TCPPayload: SourcePort = 65372, DestinationPort = 139
    - Nbtss: SESSION MESSAGE, Length =124
        PacketType: SESSION MESSAGE, 0(0x00)
      - Flags: Add 0 to Length
         Reserved: (0000000.)
         Extension: (.......0)Add 0 to Length
        Length: 124(0x7C)
    - SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
        Protocol: SMB
        Command: Transaction 37(0x25)
      - NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
         Code:     (................0000000000000000) (0) STATUS_SUCCESS
         Facility: (...0000000000000................) FACILITY_SYSTEM
         Customer: (..0.............................) NOT Customer Defined
         Severity: (00..............................) STATUS_SEVERITY_SUCCESS
      - SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
       - Flags: 24 (0x18)
          LockAndRead:     (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
          NoAck:           (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
          Reserved_bit2:   (.....0..) Reserved (Must Be Zero)
          CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
          Canonicalized:   (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
          Oplock:          (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
          OplockNotify:    (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
          FromServer:      (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
       - Flags2: 51207 (0xC807)
          KnowsLongFiles:            (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
          KnowsEas:                  (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
          SmbSecuritySignature:      (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
          Compressed:                (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
          SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
          Reserved_bit5:             (..........0.....) Reserved (Must Be Zero)
          IsLongName:                (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
          Reserved_bits7_9:          (......000.......) Reserved (Must Be Zero)
          ReparsePath:               (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
          ExtendedSecurity:          (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
          Dfs:                       (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
          Paging:                    (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
          NTStatus:                  (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
          Unicode:                   (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
         PIDHigh: 0 (0x0)
         SecuritySignature: 0x0
         Unused: 0 (0x0)
         TreeID: 8193 (0x2001)
         ProcessID: 10092 (0x276C)
         UserID: 14337 (0x3801)
         MultiplexID: 320 (0x140)
      - CTransaction:
         WordCount: 14 (0xE)
         TotalParameterCount: 32 (0x20)
         TotalDataCount: 0 (0x0)
         MaxParameterCount: 8 (0x8)
         MaxDataCount: 4200 (0x1068)
         MaxSetupCount: 0 (0x0)
         Reserved: 0 (0x0)
       - Flags: Do NOT disconnect TID
          Disconnect: (...............0) Do NOT disconnect TID
          NoResponse: (..............0.) Server response to the client
          Reserved:   (00000000000000..) Reserved
         Timeout: 5000 milli sec(s)
         Reserved2: 0 (0x0)
         ParameterCount: 32 (0x20)
         ParameterOffset: 92 (0x5C)
         DataCount: 0 (0x0)
         DataOffset: 0 (0x0)
         SetupCount: 0 (0x0)
         Reserved3: 0 (0x0)
         ByteCount: 61 (0x3D)
       - RemoteAPIBuffer:
        - FileName: \PIPE\LANMAN
         - Align: 1 Bytes
            AlignBytes: Binary Large Object (1 Bytes)
           Name: \PIPE\LANMAN
          Pad1: Binary Large Object (2 Bytes)
    - RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
        RAPOpcode: NetServerEnum2
      - ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
         Param: (W) WORD (send parameter, 16 bit integer)
         Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
         Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
         Param: (e) Entries read (receive data, 0 bit integer)
         Param: (h) WORD (receive parameter, 16 bit integer)
         Param: (D) DWORD (send parameter, 32 bit integer)
         Param: (z) ASCIIZ (send parameter, 8 bit integer)
         Param: ASCII NUL (string terminator)
      - DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
       - Datum: (B) BYTE[16] (receive data, 8 bit integer)
          Datum: (B) BYTE (receive data, 8 bit integer)
          Digit: 1
          Digit: 6
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (B) BYTE (receive data, 8 bit integer)
         Datum: (D) DWORD (receive data, 32 bit integer)
         Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
         Datum: ASCII NUL (string terminator)
      - NetServerEnum2: SV_TYPE_ALL: All in NSNET
         InfoLevel: (1) SERVER_INFO_1
         ReceiveBufferSize: 4200 (0x1068)
       - ServerType: SV_TYPE_ALL: All
          Workstation:      (...............................1) All workstations
          Server:           (..............................1.) All computers with the server service running
          Sqlserver:        (.............................1..) All running Microsoft SQL Server
          DomainCtrl:       (............................1...) All primary domain controllers
          DomainBakctrl:    (...........................1....) All backup domain controllers
          TimeSource:       (..........................1.....) All Time servers
          AFP:              (.........................1......) All Apple File Protocol servers
          Novell:           (........................1.......) All Novell servers
          DomainMember:     (.......................1........) All LAN Manager 2.x domain members
          PrintqServer:     (......................1.........) All print servers
          DialinServer:     (.....................1..........) All dial-in servers
          ServerUnix:       (....................1...........) All Unix/Xenix servers
          NT:               (...................1............) All Windows NT workstations or servers
          WFW:              (..................1.............) All Windows for Workgroups servers
          ServerMFPN:       (.................1..............) All Microsoft File and Print for NetWare servers
          ServerNT:         (................1...............) All non-domain controller servers
          PotentialBrowser: (...............1................) All servers that can run the browser service
          BackupBrowser:    (..............1.................) All backup browsers
          MasterBrowser:    (.............1..................) All master browsers
          DomainMaster:     (............1...................)  All domain master browsers
          Reserved1:        (..........11....................)
          Windows:          (.........1......................) All Windows 95 or later
          DFS:              (........1.......................) All DFS root servers
          ClusterNT:        (.......1........................) All NT Clusters
          Terminalserver:   (......1.........................) All Terminal Servers
          ClusterVSNT:      (.....1..........................) All NT Cluster Virtual Server Names
          DCE:              (....1...........................) AllIBM DSS (Directory & Security Services)
          Reserved2:        (...1............................)
          AlternateXport:   (..1.............................) Return list for alternate transport
          LocalListOnly:    (.1..............................) Return local list only
          DomainEnum:       (1...............................) Enumerate primary domain
         Domain: NSNET
    Then the reply;
        Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
    + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
    + Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
    + Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
    + Nbtss: SESSION MESSAGE, Length =2013
    + SMB: R; Transaction, Remote Administration Protocol
    - RAPResponse: NetServerEnum2 Response, Count = 31
        Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
        Converter: 2251 (0x8CB)
      - NetServerEnum2: Count = 31
         EntriesReturned: 31 (0x1F)
         EntriesAvailable: 31 (0x1F)
       + NetServerInfo1: APOLLO
       + NetServerInfo1: ARTEMIS
       + NetServerInfo1: ASKLEPIOS
       + NetServerInfo1: CASTOR
       + NetServerInfo1: DCC4503-131L
       + NetServerInfo1: DCC4503-155L
       + NetServerInfo1: DCC4503-157L
       + NetServerInfo1: DCC4503-161L
       + NetServerInfo1: DCC4503-171L
       + NetServerInfo1: DCC4503-172L
       + NetServerInfo1: DCC4503-175L
       + NetServerInfo1: DCC4503-177L
       + NetServerInfo1: DCC4503-183L
       + NetServerInfo1: DCC4503-184L
       + NetServerInfo1: DCC4503-185L
       + NetServerInfo1: DCC4503-188L
       + NetServerInfo1: DCC4503-196L
       + NetServerInfo1: DCC4503-197L
       + NetServerInfo1: DCC4503-199L
       + NetServerInfo1: DCC4503-202L
       + NetServerInfo1: DCC4503-203L
       + NetServerInfo1: DCC4503-205L
       + NetServerInfo1: DCC4503-210L
       + NetServerInfo1: DCC4503-213L
       + NetServerInfo1: DCC4503-219L
       + NetServerInfo1: DCC4503-220L
       + NetServerInfo1: DCC4503-228L
       + NetServerInfo1: DCC4503-233L
       + NetServerInfo1: DCC4503-234L
       + NetServerInfo1: DCC4503-236L
       + NetServerInfo1: DCC4503-241L
        StringData: Binary Large Object (586 Bytes)

  • Exchange 2010 Out of Office Assistant not working?

    New server with a new Exchange 2010 install into an existing domain...
    When users on both the internal network and external network try to access the Out of Office Assistant they get an error message of: " Your Out of Office settings cannot be displayed, because the server is currently unavailable".
    I have done tons of research on WebServicesVirtualDirectory and AutodiscoverVirtualDirectory and set both internal and external URL's that work if you go to them in IE )internally and externally offsite).
    Here are the settings of Autodiscover and Webservices:
    [PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | Format-List
    RunspaceId : 86aaf7fc-ca19-45b2-87d1-45ec432a670d
    CertificateAuthentication :
    InternalNLBBypassUrl : https://MAILSERVER.domain_name.local/ews/exchange.asmx
    GzipLevel : High
    Name : EWS (Default Web Site)
    InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
    ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
    LiveIdSpNegoAuthentication : False
    WSSecurityAuthentication : True
    LiveIdBasicAuthentication : False
    BasicAuthentication : True
    DigestAuthentication : False
    WindowsAuthentication : True
    MetabasePath : IIS://MAILSERVER.domain_name.local/W3SVC/1/ROOT/EWS
    Path : C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\EWS
    Server : MAILSERVER
    InternalUrl : https://MAILSERVER.domain_name.local/EWS/Exchange.asmx
    ExternalUrl : https://mail.domain_name.com/owa
    AdminDisplayName :
    ExchangeVersion : 0.10 (14.0.100.0)
    DistinguishedName : CN=EWS (Default Web Site),CN=HTTP,CN=Protocols,CN=MAILSERVER,CN=Servers,CN=Exchange Adm
    inistrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=M
    icrosoft Exchange,CN=Services,CN=Configuration,DC=domain_name,DC=local
    Identity : MAILSERVER\EWS (Default Web Site)
    Guid : 4639e4b9-9cf3-4f92-8940-f7c31e07cd47
    ObjectCategory : domain_name.local/Configuration/Schema/ms-Exch-Web-Services-Virtual-Directory
    ObjectClass : {top, msExchVirtualDirectory, msExchWebServicesVirtualDirectory}
    WhenChanged : 4/1/2010 2:47:37 PM
    WhenCreated : 3/11/2010 11:02:22 AM
    WhenChangedUTC : 4/1/2010 8:47:37 PM
    WhenCreatedUTC : 3/11/2010 6:02:22 PM
    OrganizationId :
    OriginatingServer : DOMAINCONTROLLER.domain_name.local
    IsValid : True
    [PS] C:\Windows\system32>AutodiscoverVirtualDirectory | Format-List
    RunspaceId : 86aaf7fc-ca19-45b2-87d1-45ec432a670d
    Name : Autodiscover (Default Web Site)
    InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
    ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
    LiveIdSpNegoAuthentication : False
    WSSecurityAuthentication : True
    LiveIdBasicAuthentication : False
    BasicAuthentication : True
    DigestAuthentication : False
    WindowsAuthentication : True
    MetabasePath : IIS://MAILSERVER.domain_name.local/W3SVC/1/ROOT/Autodiscover
    Path : C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Autodiscover
    Server : MAILSERVER
    InternalUrl : https://MAILSERVER.domain_name.local/autodiscover/autodiscover.xml
    ExternalUrl : https://mail.domain_name.com/autodiscover/autodiscover.xml
    AdminDisplayName :
    ExchangeVersion : 0.10 (14.0.100.0)
    DistinguishedName : CN=Autodiscover (Default Web Site),CN=HTTP,CN=Protocols,CN=MAILSERVER,CN=Servers,CN=Exc
    hange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organiza
    tion,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain_name,DC=loca
    l
    Identity : MAILSERVER\Autodiscover (Default Web Site)
    Guid : 7a234ea2-20fc-412b-bbf0-3ea5f965d8da
    ObjectCategory : domain_name.local/Configuration/Schema/ms-Exch-Auto-Discover-Virtual-Directory
    ObjectClass : {top, msExchVirtualDirectory, msExchAutoDiscoverVirtualDirectory}
    WhenChanged : 4/1/2010 3:00:49 PM
    WhenCreated : 3/11/2010 11:02:07 AM
    WhenChangedUTC : 4/1/2010 9:00:49 PM
    WhenCreatedUTC : 3/11/2010 6:02:07 PM
    OrganizationId :
    OriginatingServer : DOMAINCONTROLLER.domain_name.local
    IsValid : True
    Test-OutlookWebServices comes up with errors. The Test E-mail AutoConfiguration within Outlook still appears to be looking for Autodiscover at different URLs...
    OOF within Outlook Web App functions.
    Any suggestions would be helpful!

    From your previous post, I understand that OOF doesn't work for both internal and external clients. Error message "Your Out of Office settings cannot be displayed, because the server is currently unavailable" was received from Outlook client side. Please correct me if I have any misunderstanding.
    Before we go any further, I would appreciate your help in clarifying the following questions:
    1. When did this issue begin to occur, since the installation of Exchange 2010?
    2. Can we access and configure OOF from OWA?
    As internal & external clients are using different methods/URL to access Autodiscover and EWS, which provided OOF service, I recommend we focus on the internal users first.
    To troubleshoot this issue, please install the hotfix mentioned in the following KB on the Exchange Client Access Server first:
    Outlook 2007 crashes or you cannot access OOF settings after you install a package that contains the .NET Framework 3.5 with SP1 and the .NET Framework 2.0 with SP2 on an Exchange 2007 Client Access server or on an Exchange 2010 Client Access server
    http://support.microsoft.com/kb/958934 
    After that, check if the issue remains. If there is still problem, please help me collect:
    1. Test E-mail AutoConfiguration from Outlook client
    1. Launch Outlook 2007 using a correct configured profile.
    2. Hold down the CTRL key on your keyboard and click the Outlook icon in the notification area of the Windows taskbar, also known as the notification area.
    3. In the menu that appears, click Test E-mail AutoConfiguration.
    4. Enter your E-mail Address and Password (if not logged into the domain) in the respective edit boxes.
    5. Choose the desired auto configuration methods with Use Autodiscover, clear other selection.
    6. Click Test.
    7. Please send me the screenshot of the result tab and log tab.
    2. Result files after running the following command on the Exchange 2007 server
    Get-ExchangeCertificate | FL >C:\cert.txt
    Get-WebServicesVirtualDirectory –Server ServerName | FL >C:\EWS.txt
    Get-AutodiscoverVirtualDirectory –Server ServerName | FL >C:\Audis.txt
    Get-ClientAccessServer  | FL >C:\cas.txt
    Email them to me at [email protected]
    With the title as
    "Exchange 2010 Out of Office Assistant not working?"
    Regards
    Fazal M khan

Maybe you are looking for

  • How do I check Edge status?

    How can I check on the Edge network status? I suddenly can't connect to the Apple mail server to send/check email and can't view anything on the Web, but the 'E' still shows up that the network is there. Is there a place to check on the Edge network

  • I need to run periodical task, how can I do so?

    I have an application running in BEA Weblogic Server, it's a portal application in fact. I log every login try to my portal. My next task is too make summary of the data I've collected (every 24 hours). So I would like to run some task every 24 hours

  • How to create a horizontal multi column menu?

    We are trying to create a horizontal menu, just like the one at Oracle site ( [http://www.oracle.com/us/index.html] ) with links in multiple columns in each menu item. Can you please suggest how to do it? We have tried using the navigation model but

  • Why javascript can't show right value under struts?

    I have a <html:select>,and when change the value of select,alert the current selected value,such pages include following value: PageID pageName 1      Page 1 2        Page 2 3       �Page 3 <html:select property="pageID" size="1" onchange="javascript

  • Is registration required for the touch apps?

    hey i have a quick question. how do you resgister any of the adobe touch apps? like proto, ideas, photo shop touch revel, readert. like how and wheres the searial number or is there none? i am guessing the ipad apps are differnt form the desktop apps