SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .

I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams

Similar Messages

Reportings Services in a 2-Tier Architecture / (Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key. )

Hello,
we want to install Reporting Services in a 2-Tier Architecture. The Servers are the following:
SERVER1: Windows Server 2012 and SQL Server 2012
SERVER2: SharePoint 2013 (WFE)
Reporting Server is installed on SERVER1 and running. On SERVER2 the registration of the service through Powershell was done but it does not start. An Error when starting the Service on the server occurs with the message:
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key."
I have found the following in msdn stating that a minimal of the same SharePoint Installation must exist on the Reporting Server. The article is for SQL Server 2008 R2 and SharePoint 2010. Is this the case also for SQL Server 2012 and SharePoint 2013 and
the root of the problem? http://msdn.microsoft.com/en-us/library/bb510781%28v=sql.105%29.aspx
If so does this mean that I require for the installation another License?!?!
Thank you in advance!

Hi,
According to your post, my understanding is that you wanted to install Reporting Services in a 2-Tier Architecture.
As the article
say, if you use Two-Computer Deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the Database Engine.
The steps to install in a two-tier environment are very similar to a standalone environment hence you can go to refer to the ' Install Reporting Services SharePoint Mode for SharePoint 2013' article at http://msdn.microsoft.com/en-us/library/jj219068(v=sql.110).aspx
To install in a two-tier environment, you can refer to:
How to setup, configure and test
SQL 2012 SP1 SSRS with SharePoint 2013 SP1
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key.

Dear Expert,
I setup SharePoint for 3 tiers, WFE, APP + DB Server.
I installed SQL 2014 reporting service Add-in on APP Server and already enable sql reporting service in DB Server. DB Server can do report server.
I follow the step : https://msdn.microsoft.com/en-us/library/jj219068(v=sql.120).aspx but I stuck in no.2, I cannot start the services, in picture below.
I checked the SSRS provision is disabled not online
Please help.

Hi MasterBird,
According to your description, when you register and start the Reporting Services SharePoint Service, the error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key is thrown out.
As this
article say, if you use three-computer deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the third computer
hosts an instance of the Database Engine.
Regarding the error message, it could cause by the Reporting Services – SharePoint feature and Reporting Services Add-in for SharePoint Products haven’t been installed. Please refer to articles:
SSRS SharePoint 2013 Create Service Application error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key Error
Installing SSRS 2012 in SharePoint Mode on SP2010
If issue persists, please check the error detailed information in ULS logs, and check Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log to see if any error occurred during set up. For more information, please refer to this article:
Troubleshoot a Reporting Services Installation.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Windows 7 64-bit Installation Error "Could not find appropriate listener"

*11.2.0.1* Installation fails on Win7 Professional 64-bit
1) Installed software (did not create database initially)
2) Create Listener via Net Config (no apparent problems here)
3) Added DB to Listener via Net Mgr
4) dbca fails in final portion of DB creation. Error states: *"Could not find appropriate listener for this database. Configuring DB control requires database to be registered with at least one listener.*
My Listener services is started.
All current updates have been applied to Win 7.
I have searched around and found similar issues that seem to center around adminstrator rights, but I have not been able to make any progress.
C:\Users\scott_hp>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 10:16
:11
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1522
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 09:47:07
Uptime 0 days 0 hr. 29 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\app\scott_hp\product\11.2.0\dbhome_1
etwork
\admin\listener.ora
Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.195)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "mmodb.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully <gphmh>
Edited by: svk1965 on Feb 20, 2012 7:17 AM
Edited by: svk1965 on Feb 20, 2012 7:22 AM

svk1965 wrote:
FIXED!! *Thank you very much.* I followed your instructions, renaming listener.ora, before the lsnrctl start. I then waited and ran dbca and walked through the configuration screens and this time it processed through to 100%. But I am not sure I understand what caused the issue??
C:\Windows\system32>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:34
:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1521
The command completed successfully
C:\Windows\system32>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:36
:51
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\al
ert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 11:36:56
Uptime 0 days 0 hr. 0 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Windows\system32>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:39
:30
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 11:36:56
Uptime 0 days 0 hr. 2 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
Services Summary...
Service "mmmodb.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status READY, has 1 handler(s) for this service...
Service "mmmodbXDB.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status READY, has 1 handler(s) for this service...
The command completed successfullyThe db instance will register itself with the listener every minute or so. When you first start the listener, it will have to wait until the next cycle of the instance self-registration before it (the listener) knows about the db instance.

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

RFC call ended with "Communication Failure" exception (Function call failed; could not find the function

Hi All,
I am getting error while executing oDATA service from SAP Netweaver Gateway
Error details:
RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
I am using SAP NG 740
Project is created in Gateway system using SEGW having Map to Datasource option used.
in SPRO manage alias, I had seleted Local App option. Screen attached
I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
but still getting same error for all service.
Kindly advise.
Regards
Vivek

Hello Vivek,
Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
Check if that RFC is existing in that destination or not.
For your reference : Code would be something like this. Put BP here and check the problem.
* Error and exception handling
IF lv_subrc <> 0.
* Execute the RFC exception handling process
   me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
     EXPORTING
       iv_subrc            = lv_subrc
       iv_exp_message_text = lv_exc_msg ).
ENDIF.
Go inside this method and check to get info on what has to be done to resolve issue.
Check carefully what has gone wrong and fix it accordingly.
No need of adding service & deleting as problem is not because of that.
Regards,
Ashwin

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

I have updated my iphone 4s with iOS 6, maps are too poor could not find any location.

i have updated my iphone 4s with iOS 6, maps are too poor could not find any location.

You need to update iTunes to 11.1 on your PC

Installed SQL Reporting Services 2012 on SharePoint 2013 Server. SQL Reporting Service not available In the list of runnning services or new service applications

Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
Thanks

I had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then.

FQDN or NetBIOS for SQL Reporting Services Point installation in a cluster

Hi Folks
We have a SQL cluster for config mgr database & SQL reporting services installed on nodes because it is not cluster aware. During SCCM 2012 installation, we mentioned the details of SQL cluster only & it got installed successfully. When we checked
in console, it is showing 3 site servers related to SQL. SQL cluster is having site system role only & site database role moved under 2 nodes. Only NetBIOS names of the SQL nodes are being displayed in console.
Now when I installed reporting service point role by selecting one of the node, wizard picks the FQDN of this node automatically & role installed successfully.
Now in the console, I have another site server listed publishing the FQDN of the same node which I selected during installation which means one SQL node (site database role present at this) is displaying with NetBIOS name & the same SQL node
(reporting services point role at this) is displaying with FQDN.
My concerns is that -
Is there any issue if same SQL node displaying 2 times in SCCM console i.e. with NetBIOS name & with FQDN name?
Why reporting services point role not placed under the node which is already there with NetBIOS name?
I hope I explained my issue properly however If you guys need any more information regarding this, then let me know.
Cheers | Navdeep Sidhu

This is the default behavior when installing site DB on cluster - all nodes will be visible as NetBIOS.
I face a problem in two separate environments with SQL cluster when configuring Auto client push for servers, you will get the following error message in CCM.log in site server:
SQL Server Native Client 11.0][SQL Server]Invalid length parameter passed to the LEFT or SUBSTRING function. : sp_CP_CheckNewAssignedMachine
AND
Failed to execute SQL cmd exec [sp_CP_CheckNewAssignedMachine]
I believe this is a bug in the product.
There is a workaround FIX editing the SP in SQL DB but it is UNSUPPORTED.

Powerpivot add-in installation issue "Could not find a part of the path"

Hello,
I got a Windows Server 2008R2 terminal server with Office 2010 and Powerpivot installed. I have an issue for some users, not every user get this error. When trying to add the Powerpivot add-in in Excel the following error message is displayed:
Name:
From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto did not succeed. ---> System.Net.WebException:
Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft
Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
I have checked the path and I found nothing. I could understand the problem if all users got this error but it's online a handfew of users. Other users can add the add-in in Excel without any issue. All the users are in the same domain and they use the one
and only terminal server on the site.
Any advice? I've searched the web but haven't found anything.
Thanks in advance!

Guys, I think I solved the
issue:
Symptoms
1. Power Pivot SQL 2012 32-bit installed over the old version without
deinstalling it
2. Installed with a user with administrator rights
3. It worked under the profile with admin rights, it didn't work under the
normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
did not succeed.
4. In the admin profile, it went to the path "110": C:/Program
Files (x86)/Microsoft Analysis Services/AS Excel
Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
5. In the normal profile, it went to the - wrong - "10" path:
C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
SOLUTION
1. ADMIN: Installed VSTO 4.0
2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
if not, install it!
3. NORMAL USER: Create a .reg file (Backup your registry before!) and
use it UNDER THE NORMAL USER!!!
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
"Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
"FriendlyName"="PowerPivot for Excel"
"LoadBehavior"=dword:00000003
"Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
"CartridgePath"="C:\\Program Files\\Microsoft Analysis
Services\\AS OLEDB\\110\\Cartridges\\"
4. NORMAL USER: Rename the registry key
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
into
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
5. NORMAL USER: Start up Power Pivot and it should
work now!
Analysis
IMHO the issue lies in the fact, that the Power Pivot
installer creates two problems:
The first issue is that the path to the add-in under
the NORMAL user is simply wrong and points to a wrong location (the
"10" in the path). In the admin profile, where it was originally
installed, it points to the "110" path which is correct.
The second issue is that the installation procedure
somehow needs to create a registry key (the one under point 4 in the solution)
to complete it self and if this key already exists it fails to install and
throws up weird error messages. If you delete or rename this key, it is created
again (exactly in the same way) but then everything works out.
Hope this
helps!
Regards, Reto

Custom Timer Job to execute WCF web service error - Could not find default endpoint element that references contract

Hi,
I am currently creating custom timer job to call WCF web service to perform nighty job to update employee document library metadata. If I update regular list/library items it updates correctly on a specified interval basis. However when I try to integrate
the WCF client, it throws error shown below :
Could not find default endpoint element that references contract EmployeeServiceReference.
EmployeeServiceClient in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
I followed exact instructions Andrew Connell has provided but included my logic in execute()
public
override
void Execute(Guid
targetInstanceId)
var empClient =
new
'ServiceReference.EmployeeServiceClient();
var employee = empClient.EmployeesMethod();
I have tried all approaches to manually adding app.config settings in sharepoing web.config but still it throws the error mentioned. It seems that application config and sharepoint site config binding issue still exist and cannot be resolved.
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding
name="BasicHttpBinding_EmployeeService"
/>
</basicHttpBinding>
<netTcpBinding>
<binding
name="CustomBinding_EmployeeService">
<security>
<transport
protectionLevel="None"
/>
</security>
</binding>
</netTcpBinding>
<wsHttpBinding>
<binding
name="WSHttpBinding_EmployeeService">
<security
mode="None"
/>
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint
address="http://services.mycomp.com/EmployeeService.svc"
binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="WSHttpBinding_EmployeeService"
/>
<endpoint
address="http://services.mycomp.com/EmployeeService.svc/soap"
binding="basicHttpBinding"
bindingConfiguration="BasicHttpBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="BasicHttpBinding_EmployeeService"
/>
<endpoint
address="net.tcp://crmapp.mycomp.com:5050/EmployeeService.svc/tcp"
binding="netTcpBinding"
bindingConfiguration="CustomBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="CustomBinding_EmployeeService">
<identity>
<userPrincipalName
value="[email protected]"
/>
</identity>
</endpoint>
</client>
</system.serviceModel>
Will you please help resolving this issue?

Hi,
You can use any of the three approaches:-
1) Access web application's web.config programmatically in Execute() method.
http://praveenkasireddy.wordpress.com/2012/12/14/access-web-application-configuration-values-in-timer-job-sharepoint/
2) Store the configuration in xml and upload it to SharePoint document library then read from there
http://www.sharepointdynamics.net/2011/08/using-an-xml-settings-file-to-store-values-for-your-sharepoint-projects/
3) Programmatically configure a WCF endpoint.
http://msdn.microsoft.com/en-us/library/ff647110.aspx
Regards, Shruti

Installer problems - Could not find the main class

Hello
I am trying to install openmq on vista and having problems. I've had the same problem with a nightly build of 4.3 and stable 4.2 build. The install kicks off fine until I get to the part where the install happens and then I get:
Java Virtual Machine Launcher : Could not find the main class. Program will exit
I have several sun JREs/JDKs installed and have tried all of them, the installer itself is not impacted:
jre 1.7.0
jdk 1.7.0
jre 1.6.0.7
jre 1.6.0.7 and jre 1.6.0.7
Am I missing something obvious or is there a way of installing without the java installer ?
Much obliged
Edited by: Alphawave on Oct 14, 2008 11:39 AM

Hi,
I've seen this error before on vista. In the past the users saw this message when they didn't have write permission on the directory they were installing to. Even with administrator privileges, they still need write permissions.
A quick test is to:
login as the user you are installing as.
cd to the directory you are installing into.
touch foo // to see if you can write to the dir.
Thanks.

ITunes 10.7 installation error: "Could Not Open Key," etc. & Privileges error

When attempting to download iTunes 10.7.0.021 (latest version for iOS 6 compatibility with my new iPhone5) I get the following error:
"Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B91A1EE8\7E577B2224C65CF4E801A9E52375 DB49."
This error pops up in the middle of my iTunes installation; After hitting okay, the installation proceeds and then another error message reading:
"Apple Mobile Devices Failed To Start. Please make sure you have sufficient privleges... etc."
I don't know what to do about both of these errors, so if you find a solution please e-mail me: [email protected]

try with this one
uninstall all the apple application S/w like Quicktime, Bonjour,
apple Device Support, Apple Auto update, Itunes etc from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it
If you are having Problem in uninstalling any of the apple application
try 'revo uninstaller' and uninstall all the apple applications
mentioned above

Installation Error - Could not open key.............Please help

Still trying to install iTunes and QuickTime, but have an error,
Could not open key:
HKEY_LOCALMACHINE\Software\Classes\QuickTimePlayerApp\CLSID.
Verify that you have suffcient access to that key, or contact your support personnel.
Any help would be most welcome, as I am desperate to use my new Nano my wife just bought me for my Birthday. In plain English if you can.

+My next problem is, that whenever I plug my iPod Nano, 3rd Gen into my PC, it shuts down and reboots. Any ideas on this one?+
Do you also get that if you try playing a movie using QuickTime?
Are you getting any sort of blue screen when the PC shuts down? if so, what numerical and text codes are you getting with it? (ie 0x{zeros/letters/numbers} CAPSANDUNDERSCORES)
If the blue screen mentions a specific file, let us know what that is called too. (Exact spelling, please.)
Here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
If you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.

SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

Similar Messages

Maybe you are looking for