SharePoint 2013 Configuration Wizard failure while joining a WFE to the existing server farm.
Dears,
I've been troubleshooting an issue while trying to join a new WFE server to an existing SharePoint 2013 farm.
Issue Description:
When we run the wizard it runs for almost 30 to 45 minutes on the step 3 itself and eventually fails at the end with an error message "Failed to connect to the configuration Database..... Value doesn't fall within the expected range"
First I thought this is a connectivity issue with the config DB and monitored the complete operation very closely after checking the permissions and SQL server connection and happened to see that the server was able to connect to the farm and all the web
applications and the related solutions were pushed to the server and apparently the failure of the Wizard at below point: Followed by the error, all web sites and solutions were retracted and a complete roll back happens.
Can someone pls help me here at the earliest as I'm stuck ???
0
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:41.62 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:45.09 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:45.09 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx75
Unexpected Reached the retry limit for committing IIS configuration changes, the operation must be rerun.
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology eru1
Medium Released mutex 'Global\Microsoft.SharePoint.SPIisProvisioningLock'
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology aj4j4
Unexpected Joining Farm failed. The exception is Value does not fall within the expected range. StackTrace is at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.CommitChanges()
at Microsoft.Web.Administration.Configuration.CommitChanges() at Microsoft.Web.Administration.ConfigurationManager.CommitChanges() at Microsoft.Web.Administration.ServerManager.CommitChanges() at Microsoft.SharePoint.Administration.SPIisServerManager.CommitChanges(ApplyChanges
applyChanges) at Microsoft.SharePoint.Administration.SPIisProvisioningAssistant.ProvisionApplicationPool(String name, SecurityIdentifier sid, String password, SPIisApplicationPoolSettings settings) at Microsoft.SharePoint.Administration.SPIisManager.ProvisionApplicationPool(String
name, SecurityIdentifier sid, SecureString password, SPIisApplicationPoolSettings settings) at Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool.ProvisionLocal(SPIisWebServiceApplicationPoolProvisioningOptions options)
at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.ProvisionApplicationInstance() at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision() at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 88ah
High Unjoining the farm.
BR,
Mukesh
Hi Pradeep, this wasn't due to any permission issue.. I was trying with the farm account which is a local admin group member as well as being a member of IIS_WPG.. on a continues investigation happened to find that the IIS config file was corrupted and which
encountered issues in the creation of app pool.. I had to tweak around some settings with the config file by considering the other WFE as a reference.. this actually fixed the issue..
BR,
Mukesh
Regards Mukesh
Similar Messages
-
SharePoint 2013 Configuration Wizard Missing Components after Install ServicePack 1
Hello,
today we have installed SharePoint Service Pack 1 for SharePoint Server 2013 inclusive Service Pack 1 for all language packs (we used the new released Service Packs).
Our SharePoint Environment has only one SharePoint Server.
Many
language packs
are
installed
on
this
server.
If we try to run the configuration wizard through the GUI, then we get the following error:
If we try to run "psconfig -cmd upgrade -inplace b2b -wait" then we get also an error:
SharePoint Products Configuration Wizard version 15.0.4569.1503. Copyright (C) Microsoft Corporation 2012. All rights reserved.
The upgrade command is invalid or a failure has been encountered.
The server farm will not work with missing installs. Add "-cmd installcheck -noinstallcheck" to the command-line to ignore this warning.
The following is missing on :
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
We checked the Installation in "Programm and Features", result see below:
Next step we run the PowerShell command: Get-SPProduct -local, result see below:
ProductName
Required Missing Servers
Language Pack for SharePoint 2013 - Bulgarian/български True
{ServerName, }
Language Pack for SharePoint 2013 - Croatian/Hrvatski True
{ServerName, }
Language Pack for SharePoint 2013 - Romanian/Română
True {ServerName, }
Language Pack for SharePoint 2013 - Thai/ไทย
True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (PRC)/中文(简体) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (Taiwan)/中文 (繁體) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Czech/čeština True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Danish/dansk True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Dutch/Nederlands True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Finnish/suomi True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - French/Français True {ServerName,
Language Pack for SharePoint and Project Server 2013 - German/Deutsch True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Greek/Ελληνικά True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hebrew עברית True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hungarian/magyar True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Italian/Italiano True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Japanese/日本語 True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Korean/한국어 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Norwegian/norsk True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Polish/Polski True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português (Brasil) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Russian/русский True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Slovak/Slovenčina True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Spanish/Español True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Swedish/svenska True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Turkish/Türkçe True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Ukrainian/Українська True {ServerName, }
Microsoft SharePoint Server 2013
True {ServerName, }
What's the mistake?
Why we can't run the configuration wizard?
Has anyone answers?
Thanks a lot.
Regards Mariotry to run the below command on all server in the farm and then run the config wizard
Get-SPProduct -Local
Above command basically update the product information into the configuration database. Read this blog from the Trevor.
http://thesharepointfarm.com/2013/12/the-magic-of-get-spproduct-local/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
PowerPivot for SharePoint 2013 Configuration not starting
Dear,
I have
Windows 2008 R2 SP1 (up to date version)
SQL Server 2012 SP1 PowerPivot For SharePoint (11.1.3000.0 -> the number is from the control Panel)
But I try to run the command PowerPivot for SharePoint 2013 Configuration, the wizard is not starting : it closed with an error
If someone has idea, he is welcomed
Regards
Bohorhi Muhammad,
thanks a lot for your help but what is "Powershare"?
About running Powerpivot configuration Tools with administrator rights , I have tried without success :-(
I have found the error log in the Windows event viewer, maybe it'll be helpful
Application : PowerPivotSPAddinConfiguration.exe
Version du Framework : v4.0.30319
Description : le processus a été arrêté en raison d'une exception non gérée.
Informations sur l'exception : System.TypeInitializationException
Pile :
à Microsoft.AnalysisServices.SPAddin.Configuration.Tool.App.Application_Startup(System.Object, System.Windows.StartupEventArgs)
à System.Windows.Application.<.ctor>b__1(System.Object)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
à MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
à System.Windows.Threading.DispatcherOperation.InvokeImpl()
à System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
à System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
à System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
à System.Windows.Threading.DispatcherOperation.Invoke()
à System.Windows.Threading.Dispatcher.ProcessQueue()
à System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
à MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
à MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
à MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
à System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
à MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
à MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
à MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
à System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
à System.Windows.Application.RunDispatcher(System.Object)
à System.Windows.Application.RunInternal(System.Windows.Window)
à Microsoft.AnalysisServices.SPAddin.Configuration.Tool.App.Main()
and there is another message just after that said that the faulting module is
C:\Windows\system32\KERNELBASE.dll
regards
Bohor -
SharePoint Products Configuration Wizard - Configuration Failed at step 10 of 10
A little background information. I am simply trying to create a SharePoint Server on my laptop. I utilized the Microsoft Hyper-V Manager
to create a Virtual Machine of which I have Windows Server 2012 R2 running. I have installed the SharePoint prerequisites via some power shell scripts that all seemed to have worked and I believe i even updated the server with all updates to date. <o:p></o:p>
<o:p> </o:p>
However, when I run the SharePoint Products Configuration i get a failure at step 10 of 10. I am a SharePoint developer and power user not an
administrator for Windows Server. Any assistance would be greatly appreciated. <o:p></o:p>
<o:p> </o:p>
<o:p> </o:p>
SharePoint Products Configuration Wizard<o:p></o:p>
Configuration Failed<o:p></o:p>
<o:p></o:p>
One or more configuration settings failed. Completed configuration settings will not be rolled back. Resolve the problem and run this configuration
wizard again. The following contatins detailed information about the failure:<o:p></o:p>
Failed to create sample data.<o:p></o:p>
<o:p> </o:p>
An exception of the type System.ServiceModel.ServerTooBusyException was thrown. Additional exception information: The HTTP service located
at<o:p></o:p>
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc is
unavailable. This could be because the service is to busy or because no endpoint was found listening at the specified address. Please ensure that the address is correct and try accessing the service again later.<o:p></o:p>
<o:p> </o:p>
Click Finish to close this wizard.<o:p></o:p>
Larry StupkaThe First Thing Disable or Remove Antivirus / ForeFront, etc. and try if again it's failed then try clearing the cache.ini
you can find it in location
C:\ProgramData\Microsoft\SharePoint\Config\GUId
go inside the GUID and look for cache.ini
reset the value to 1
run the command stsadm -o execsvcadmjobs
try running the below command
psconfig.exe -cmd upgrade -inplace b2b -wait -force
Sajid H. A. Rashid Analyst Application Developer -
We are using SQL Server 2012.
Every now and then, when we execute the below stored procedure INSERT_INTO_MYTBL, we got the below error, and it returned @ID = 0.
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
This failure occured while attempting to connect to the Principle server."
What causes this error, and how can we fix it ?
Thank you.
create procedure INSERT_INTO_MYTBL
@ID int output,
@Order varchar(50) = NULL,
@ACCOUNT varchar(20) = NULL
AS
DECLARE @Success int, @TryNr int, @ErrMsg varchar(500), @ErrNumber int, @expected_id int;
SET @Success = 0;
SET @TryNr = 1;
SET @ErrMsg = ''
WHILE @Success = 0 AND @TryNr <= 3 and @ErrMsg = ''
BEGIN;
BEGIN TRY;
BEGIN TRANSACTION;
retry:
BEGIN TRY;
SELECT @expected_id = ident_current('myTbl') + 1
SELECT @order = @account + '-' + CAST(@expected_id AS varchar(50))
insert into myTbl
([Order],ACCOUNT)
values
(@Order,@ACCOUNT)
END TRY
BEGIN CATCH;
SELECT @ErrNumber = ERROR_NUMBER()
IF @ErrNumber = 2627
BEGIN;
GOTO retry
END;
ELSE
BEGIN;
SET @ErrMsg = '1.' + ERROR_MESSAGE() + ' ' + @order
RAISERROR (@ErrMsg, 16, 1);
END;
END CATCH
select @ID = SCOPE_IDENTITY()
IF @id <> @expected_id
BEGIN
UPDATE myTbl
SET [Order] = @ACCOUNT + '-' + CAST(@ID AS varchar(50))
WHERE ID = @ID
END
SET @Success = 1
COMMIT TRANSACTION;
END TRY
BEGIN CATCH;
ROLLBACK TRANSACTION;
SELECT @ErrNumber = ERROR_NUMBER()
IF @ErrNumber = 1205
BEGIN;
SET @TryNr = @TryNr + 1;
IF @TryNr > 3
RAISERROR ('Giving up after 3 consecutive deadlocks for %s', 16, 1,@ACCOUNT);
END;
ELSE
BEGIN;
SET @ErrMsg = '2.' + ERROR_MESSAGE() + ' ' + @order
RAISERROR (@ErrMsg, 16, 1);
END;
END CATCH;
END;When the problem occurs, the stored procedure returns @ID = 0, which I think means the query
When the problem occurs, the procedure does not return anything. SQL Server was told to stop executing. Furthermore, unless you issue the command SET XACT_ABORT ON, SQL Server will not roll back any open transaction. Which is one more reason you should not
permit command timeouts.
As for why this procedure sometimes take a long time, I would primarily suspect locking. When this occurs (but before the timeout elapses!), you could use my beta_lockinfo to see if there is any blocking going on. You find it here:
http://www.sommarskog.se/sqlutil/beta_lockinfo.html
Erland Sommarskog, SQL Server MVP, [email protected] -
Hi All,
I am getting "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error while opening the previous instances of the crystal report in BOCMC.
I am trying to run or schedule the report but it is always going to "PENDING STATUS".
(Previously it was resolved after restarting the server. Error : problem in ProcessingServer)
Could you please suggest.
Details :
Crystal Reports 2008
Clarity 13
Server Details:
BO XI 3.1 SP5
OS : Red Hat 6
Patch X11
Symptom
" Crystal Reports 2008/2011/2013 Processing Server fails to create child
processes after applied X11 client libraries security update on Redhat
Linux 6
" "An error occurred while creating a subprocess in the processing server.
[RCIRAS0603]" error occurs when viewing the Crystal Reports in InfoView/BIHi Rajeev,
This is a known issue you can refer to below note,
2098659 - "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error occurs after applied X11 client libraries security update on Redhat Linux 6
Regards,
~Shree -
An error occurred while creating a subprocess in the processing server.
Hi,
I have developed a Crystal Report using CR 2008 with SAP BW as the datasource. The report is executing fine in CR 2008, but when saved to the BOE, in Infoview it is throwing the following error:
An error occurred while creating a subprocess in the processing server. [RCIRAS0603]
Did anyone face similar issue? Is there any resolution for the same.?
I have deleted the report from enterprise and saved it back, still facing this problem.
Appreciate your help in this regard.
Thanks
RaviCrystal Reports processing (CR Page) server is not operational.
There could be many reasons for this.
CR processing server traces will need to be enabled and analysed by support.
You should also be on the latest patch release.
Sometimes following steps help :
1) Stop all of the XI 3.1 processes using the ./stopservers command (ensure they are all down before proceeding)
2) Once all processes are stopped ensure the serverpids directory is empty
<install dir>/bobje/serverpids/
If any files are within the 'serverpids' folder, remove them.
3) Go to bobje/tmp
Remove any MW, .MW, mw, .mw and regss files and/or directories
4) Go to /tmp
Remove any MW, .MW, mw, .mw, and regss files and/or directories
5) start servers back up.
If this doesn't help - you'll need to open a Support Incident -
Sync failure because itunes cannot connect to the sync server PLEASE HELP!!
HELP! I cannot get my info back into my iphone.
During sync I get an error message that says 'sync failure because itunes cannot connect to the sync server''
I have had this problem today so i restored the iphone and it has synched the ipod portion but will not sync calenders, contacts , email accounts or bookmarks.
The restore erased all of these and now i cannot replace them.
Thank you in advance for any help in solving this crisis.I had the same problem (not from day one but within the past couple months). Anyway, I wish I had made note of everything that the quick-and wonderful-Apple support did when I finally decided to give them a call today-after getting tired of not being able to update calendars and contacts and not seeing any helpful info here-unfortunately, I continue that legacy (as I can't remember everything I had to do to fix-sorry) Ultimately involves creating a new user I called mine IPHONE...then doing some of this and that-and finally merging info and going to "Terminal" and typing in some code...then deleting some of the old files, Took about twenty-minutes on the phone. Sorry I didn't think ahead for others and write al this down...but just know the Apple people were great. I talked to a gal for about ten minutes very methodically trouble-shooting. When nothing worked she shifted me over to a real nice guy who calmly and politely guided me through all the steps to fix this annoying problem. I hate to say it, but just get on the phone and-if you have the same experience as me-you will get 5 Star treatment and your sync will work like a dream. Every time I have to contact Apple Support (which isn't that often) my experience is nothing but the best. Unbelievable customer service! Methodical, Personable, and truly knowledgeable! There is a fix and it works like a dream. Not that hard but you'll need customer service to walk you through it-as I can't (sorry I can't be of much help...) Good luck!
-
SharePoint Product configuration wizard cannot Register "Document conversion Launcher Server"
Each time I run the SharePoint configuration wizard, it stop at the following step:-
It will mentioned that it install the document conversion service, but while registering it , the wizard will stop and it will raise a timeout exception.
Also when I tried to start the Document conversion related services from central administration, it showed that they are stopped and I cannot start them:-
Can anyone advice about this problem ?
ThanksHi john,
Please provide more detailed information about the error you met, and you can check the log file to find more information about this issue. The path of the log file is : C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, in Registry, Add a new key named "AcknowledgedRunningOnAppServer" of DWORD type at the below mentioned locations.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\version\LauncherSettings
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\version\LoadBalancerSettings
Set the value to 1.
Restart the System.
More inforamtion, please refer to the link:
http://stackoverflow.com/questions/23184703/sharepoint-2013-sp1-install-error-during-product-configuration-step-5-failed-t
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
SharePoint 2013 Configuration Access denied
Hi While configuring the SharePoint 2013, getting the following error.
System.InvalidOperationException: An error occurred while getting information about the user sp_farm at server <ADserver>: Access is denied
at Microsoft.SharePoint.Win32.SPNetApi32.NetUserGetInfo1(String server, String name)
sp_farm is a Domain User, and local admin, for SQL server this account have sysadmin rights, still having the issue please help.Basically SharePoint is trying to get information about this service account and access is denied. This is because you may be logged in on server and running Products and Configuration Wizard as a local user that does not have access to the AD OU to verify
the SP_Farm domain account.
Log out from sever and Log in again with "SP_Farm" user and re-launch the SharePoint Products and Configuration Wizard. Specify the SP_Farm account to connect to the SQL Database.Before you run the config wizard , please log in to SQL
Management Studio and remove the partially created farm database SharePoint_Config or use a different name the second time.
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Project Server 2013 Configuration Wizard Error
Hi Everyone,
I have installed SharePoint 2013 over Single Server with built in DB. Server
uses Windows Server 2008 & SQL Server 2008. SharePoint installed correctly and it is running well.
Now,
I need to install Project Server 2013, so I installed its required updated, its prerequisites, then installed it. After installation, Configuration wizard started, but it failed with following error info:-
What
is the reason of that error and how to solve this problem?
Thanks
Wa'el MohsenThat sounds easy enough. Just two questions though:
1) what is 25774? KB? an update?
2) how do I delete it from IIS?
Thank you, -
We are using .asmx services for SharePoint features such as comments, and rating.
Service
Feature used
http://<<hostname>>/_vti_bin/socialdataservice.asmx
Commenting, Rating
http://<<hostname>>/_vti_bin/UserProfileService.asmx
For out of box workflows
In SharePoint 2013,
SharePoint – 80 web application is on claims based mode and user is logging in with windows authentication. With logged-in client context used to call SharePoint's default web service, we are getting below error message from
web service (Social data and user profile services).
Server was unable to process request. ---> The corresponding SID in the domain is not part of the intended account type.
When the service is accessed using console application with Visual Studio credentials (logged in user), we are able to access the service. Below is the code snippet
using (SocialDataService
service = new
SocialDataService())
service.Credentials =
CredentialCache.DefaultCredentials;
SocialCommentDetail detail = service.AddComment("<<url>>",
"Test Comment",
null,
null);
Are SharePoint 2013 web services not supporting request coming with claim based authentication web application?
Thanks, Pratik Agrawal (MAQ Software)While this applies to 2010, I believe the same is true with 2013:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/925e5f46-317f-46d3-bc55-c67f07eb2372/call-sharepoint-web-services-using-claimbased-authentication?forum=sharepointgeneralprevious
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hi
I have SharePoint 2013 farm and installed Workflow Manager 1.0 and configured it and have been runing fine for several months. I upgraded this farm to SP 1 and then started having some issue with publish WF 2013 with task in SPD.
I re-Registered using Register-SPWorkflowService command and that fixed the problem and WorkFlow Manager running again OK. It has been couple of monthle and now I am having the problem again but with a different error on SPD
So doing what I did before, I tried to re-Registered WFM but this time getting the error below
Register-SPWorkflowService : The data or messaging layer is unavailable. Please retry
after 300 seconds.
The only possible resolution that I found is to add the -AllowOAuthHttp in my Register-SPWorkflowService cmdlet but that didnot not resolve the problem. I tried that anyway eventhough we do not allow http.
I did some checking for status and configuration and Get-SBFarmstatus showing all WFM services are running OK
I browsed to the WFM server https://servername:12290 and get the same error
- <Errorxmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>UnexpectedError</Code>
<Message>The data or messaging layer is unavailable. Please retry after 300
seconds.</Message>
</Error>
If anyone have advise / suggestion to resolve this issue, please share
Thanks in advance for all comments
SwanlHi Swanl,
Please refer to the article below for troubleshooting actions for workflow manager:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Moreover, activate workflow manager logs and see if there is any error message that could be help.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Synching SharePoint 2013 to Outlook 2010 - Is it possible to restrict the views?
Hi,
I'm trying to synch SharePoint 2013 calendars with Outlook 2010. If I require a certain view from SharePoint e.g. [Me] as a Project Manager to be synched to Outlook, can you restrict it so only this data is pulled through?
I've tried and it currently pulls through all the calendar appointments on SharePoint through to Outlook. I only require a certain view of appointments, and dont want this information to be public to the rest of my organisation.
Many thanksHi,
According to your description, my understanding is that you want to sync the appointments which were assigned to you in the SharePoint calendar with Outlook.
I recommend to use a group calendar and then sync the calendar with Outlook. After that, only your appointments will be synced with Outlook.
Best regards.
Thanks
Victoria Xia
TechNet Community Support
Maybe you are looking for
-
Scheduling issue with Analysis for Excel
Hi, I am trying to schedule a workbook in Analysis for Excel from CMC. The schedule always fails when I uncheck the APPLY DEFAULT FORMATS in the components tab of the Display Analysis. The schedule works fine if this box is checked. Has anyone come
-
I haven't seen a question about this posted since iOS 5 came out (and most seem to come from the last decade). I'm running iOS 5 on my iPhone 4 and my iPad 2. I use both iCloud calendars and I subscribe to a number of Google calendars, as well. This
-
How to install an HP 4050 PCL6 as a network printer
I've a MSHOME network in place, with 5 pc's connected. One of this is a printer server directly connected with HP4050 PCL6 printer. I configured as "shared" this printer. So I'm able to print on this from all pc'c. Now I want to share this printer al
-
Using previous release of OC4J in JDev 10g
We are trying to configure JDeveloper so that we can deploy our application in a standalone OC4J 9.0.4. We see in JDeveloper help, under the topic "Previous Releases of Standalone OC4J", that we should be able to configure a connection using the "Sta
-
hi, I've got a serious trouble after installing the OS. the first time i boot on it (i've also got windows XP on my system, a packard bell laptop h5530), it writes me, at screen, something that looks like an html table, and for each tag say : class n