SharePoint 2013 Configuration Wizard Missing Components after Install ServicePack 1
Hello,
today we have installed SharePoint Service Pack 1 for SharePoint Server 2013 inclusive Service Pack 1 for all language packs (we used the new released Service Packs).
Our SharePoint Environment has only one SharePoint Server.
Many
language packs
are
installed
on
this
server.
If we try to run the configuration wizard through the GUI, then we get the following error:
If we try to run "psconfig -cmd upgrade -inplace b2b -wait" then we get also an error:
SharePoint Products Configuration Wizard version 15.0.4569.1503. Copyright (C) Microsoft Corporation 2012. All rights reserved.
The upgrade command is invalid or a failure has been encountered.
The server farm will not work with missing installs. Add "-cmd installcheck -noinstallcheck" to the command-line to ignore this warning.
The following is missing on :
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
We checked the Installation in "Programm and Features", result see below:
Next step we run the PowerShell command: Get-SPProduct -local, result see below:
ProductName
Required Missing Servers
Language Pack for SharePoint 2013 - Bulgarian/български True
{ServerName, }
Language Pack for SharePoint 2013 - Croatian/Hrvatski True
{ServerName, }
Language Pack for SharePoint 2013 - Romanian/Română
True {ServerName, }
Language Pack for SharePoint 2013 - Thai/ไทย
True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (PRC)/中文(简体) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (Taiwan)/中文 (繁體) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Czech/čeština True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Danish/dansk True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Dutch/Nederlands True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Finnish/suomi True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - French/Français True {ServerName,
Language Pack for SharePoint and Project Server 2013 - German/Deutsch True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Greek/Ελληνικά True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hebrew עברית True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hungarian/magyar True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Italian/Italiano True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Japanese/日本語 True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Korean/한국어 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Norwegian/norsk True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Polish/Polski True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português (Brasil) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Russian/русский True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Slovak/Slovenčina True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Spanish/Español True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Swedish/svenska True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Turkish/Türkçe True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Ukrainian/Українська True {ServerName, }
Microsoft SharePoint Server 2013
True {ServerName, }
What's the mistake?
Why we can't run the configuration wizard?
Has anyone answers?
Thanks a lot.
Regards Mario
try to run the below command on all server in the farm and then run the config wizard
Get-SPProduct -Local
Above command basically update the product information into the configuration database. Read this blog from the Trevor.
http://thesharepointfarm.com/2013/12/the-magic-of-get-spproduct-local/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
Similar Messages
-
SharePoint 2013 Configuration Wizard failure while joining a WFE to the existing server farm.
Dears,
I've been troubleshooting an issue while trying to join a new WFE server to an existing SharePoint 2013 farm.
Issue Description:
When we run the wizard it runs for almost 30 to 45 minutes on the step 3 itself and eventually fails at the end with an error message "Failed to connect to the configuration Database..... Value doesn't fall within the expected range"
First I thought this is a connectivity issue with the config DB and monitored the complete operation very closely after checking the permissions and SQL server connection and happened to see that the server was able to connect to the farm and all the web
applications and the related solutions were pushed to the server and apparently the failure of the Wizard at below point: Followed by the error, all web sites and solutions were retracted and a complete roll back happens.
Can someone pls help me here at the earliest as I'm stuck ???
0
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:41.60 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:41.62 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:43.35 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:45.09 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:45.09 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:45.10 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:46.82 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology bmt5
High Creating new application pool 'SecurityTokenServiceApplicationPool'.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group IIS_WPG.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group WSS_WPG.
02/19/2015 11:36:48.52 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 96ft
Medium Adding Domain\Account to local group PerformanceMonitorUsers.
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sis
Medium Attempting to give SE_ASSIGNPRIMARYTOKEN_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 9sit
Medium Attempting to give SE_INCREASE_QUOTA_NAME privilege to application pool user Domain\Account
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx74
High An exception occured while committing IIS configuration changes: Value does not fall within the expected range.
02/19/2015 11:36:48.54 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology fx75
Unexpected Reached the retry limit for committing IIS configuration changes, the operation must be rerun.
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology eru1
Medium Released mutex 'Global\Microsoft.SharePoint.SPIisProvisioningLock'
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology aj4j4
Unexpected Joining Farm failed. The exception is Value does not fall within the expected range. StackTrace is at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.CommitChanges()
at Microsoft.Web.Administration.Configuration.CommitChanges() at Microsoft.Web.Administration.ConfigurationManager.CommitChanges() at Microsoft.Web.Administration.ServerManager.CommitChanges() at Microsoft.SharePoint.Administration.SPIisServerManager.CommitChanges(ApplyChanges
applyChanges) at Microsoft.SharePoint.Administration.SPIisProvisioningAssistant.ProvisionApplicationPool(String name, SecurityIdentifier sid, String password, SPIisApplicationPoolSettings settings) at Microsoft.SharePoint.Administration.SPIisManager.ProvisionApplicationPool(String
name, SecurityIdentifier sid, SecureString password, SPIisApplicationPoolSettings settings) at Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool.ProvisionLocal(SPIisWebServiceApplicationPoolProvisioningOptions options)
at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.ProvisionApplicationInstance() at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision() at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
02/19/2015 11:36:48.65 psconfigui.exe (0x0FA4)
0x2D28 SharePoint Foundation
Topology 88ah
High Unjoining the farm.
BR,
MukeshHi Pradeep, this wasn't due to any permission issue.. I was trying with the farm account which is a local admin group member as well as being a member of IIS_WPG.. on a continues investigation happened to find that the IIS config file was corrupted and which
encountered issues in the creation of app pool.. I had to tweak around some settings with the config file by considering the other WFE as a reference.. this actually fixed the issue..
BR,
Mukesh
Regards Mukesh -
PowerPivot for SharePoint 2013 Configuration not starting
Dear,
I have
Windows 2008 R2 SP1 (up to date version)
SQL Server 2012 SP1 PowerPivot For SharePoint (11.1.3000.0 -> the number is from the control Panel)
But I try to run the command PowerPivot for SharePoint 2013 Configuration, the wizard is not starting : it closed with an error
If someone has idea, he is welcomed
Regards
Bohorhi Muhammad,
thanks a lot for your help but what is "Powershare"?
About running Powerpivot configuration Tools with administrator rights , I have tried without success :-(
I have found the error log in the Windows event viewer, maybe it'll be helpful
Application : PowerPivotSPAddinConfiguration.exe
Version du Framework : v4.0.30319
Description : le processus a été arrêté en raison d'une exception non gérée.
Informations sur l'exception : System.TypeInitializationException
Pile :
à Microsoft.AnalysisServices.SPAddin.Configuration.Tool.App.Application_Startup(System.Object, System.Windows.StartupEventArgs)
à System.Windows.Application.<.ctor>b__1(System.Object)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
à MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
à System.Windows.Threading.DispatcherOperation.InvokeImpl()
à System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
à System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
à System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
à System.Windows.Threading.DispatcherOperation.Invoke()
à System.Windows.Threading.Dispatcher.ProcessQueue()
à System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
à MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
à MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
à MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
à System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
à MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
à MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
à MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
à System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
à System.Windows.Application.RunDispatcher(System.Object)
à System.Windows.Application.RunInternal(System.Windows.Window)
à Microsoft.AnalysisServices.SPAddin.Configuration.Tool.App.Main()
and there is another message just after that said that the faulting module is
C:\Windows\system32\KERNELBASE.dll
regards
Bohor -
SharePoint Products Configuration Wizard - Configuration Failed at step 10 of 10
A little background information. I am simply trying to create a SharePoint Server on my laptop. I utilized the Microsoft Hyper-V Manager
to create a Virtual Machine of which I have Windows Server 2012 R2 running. I have installed the SharePoint prerequisites via some power shell scripts that all seemed to have worked and I believe i even updated the server with all updates to date. <o:p></o:p>
<o:p> </o:p>
However, when I run the SharePoint Products Configuration i get a failure at step 10 of 10. I am a SharePoint developer and power user not an
administrator for Windows Server. Any assistance would be greatly appreciated. <o:p></o:p>
<o:p> </o:p>
<o:p> </o:p>
SharePoint Products Configuration Wizard<o:p></o:p>
Configuration Failed<o:p></o:p>
<o:p></o:p>
One or more configuration settings failed. Completed configuration settings will not be rolled back. Resolve the problem and run this configuration
wizard again. The following contatins detailed information about the failure:<o:p></o:p>
Failed to create sample data.<o:p></o:p>
<o:p> </o:p>
An exception of the type System.ServiceModel.ServerTooBusyException was thrown. Additional exception information: The HTTP service located
at<o:p></o:p>
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc is
unavailable. This could be because the service is to busy or because no endpoint was found listening at the specified address. Please ensure that the address is correct and try accessing the service again later.<o:p></o:p>
<o:p> </o:p>
Click Finish to close this wizard.<o:p></o:p>
Larry StupkaThe First Thing Disable or Remove Antivirus / ForeFront, etc. and try if again it's failed then try clearing the cache.ini
you can find it in location
C:\ProgramData\Microsoft\SharePoint\Config\GUId
go inside the GUID and look for cache.ini
reset the value to 1
run the command stsadm -o execsvcadmjobs
try running the below command
psconfig.exe -cmd upgrade -inplace b2b -wait -force
Sajid H. A. Rashid Analyst Application Developer -
Project Server 2013 Configuration Wizard Error
Hi Everyone,
I have installed SharePoint 2013 over Single Server with built in DB. Server
uses Windows Server 2008 & SQL Server 2008. SharePoint installed correctly and it is running well.
Now,
I need to install Project Server 2013, so I installed its required updated, its prerequisites, then installed it. After installation, Configuration wizard started, but it failed with following error info:-
What
is the reason of that error and how to solve this problem?
Thanks
Wa'el MohsenThat sounds easy enough. Just two questions though:
1) what is 25774? KB? an update?
2) how do I delete it from IIS?
Thank you, -
SharePoint Product configuration wizard cannot Register "Document conversion Launcher Server"
Each time I run the SharePoint configuration wizard, it stop at the following step:-
It will mentioned that it install the document conversion service, but while registering it , the wizard will stop and it will raise a timeout exception.
Also when I tried to start the Document conversion related services from central administration, it showed that they are stopped and I cannot start them:-
Can anyone advice about this problem ?
ThanksHi john,
Please provide more detailed information about the error you met, and you can check the log file to find more information about this issue. The path of the log file is : C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, in Registry, Add a new key named "AcknowledgedRunningOnAppServer" of DWORD type at the below mentioned locations.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\version\LauncherSettings
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\version\LoadBalancerSettings
Set the value to 1.
Restart the System.
More inforamtion, please refer to the link:
http://stackoverflow.com/questions/23184703/sharepoint-2013-sp1-install-error-during-product-configuration-step-5-failed-t
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
SharePoint 2013 Update Workflow Manager problems after Service Pack 1
Hello guys,
I've installed the service pack 1 for SharePoint 2013 and then I tried to update the workflow manager, but I always get an error message that the workflow manager could not be updated!
Is the installing order wrong? should I first install the update for the worklfow manager and then the update for SharePoint 2013?
Best regards
MatthiasThe error message see below for "Cumulative Update for Workflow Manager 1.0 (KB2799754)
"One of the custom actions failed. The installation cannot continue. See log for details!"
[06/06/14 09:48:44] Performing install.
[06/06/14 09:48:44] At least one of the product packages has been detected.
[06/06/14 09:48:44] preReqUpdateDisplayName is :
[06/06/14 09:48:44]
[06/06/14 09:48:44] Wizard mode on.
The following products will be enhanced:
Workflow Manager 1.0
Attempting to open cached Msi package for product code: {04A7199E-565D-4654-88A3-80A9A7BADDD9}
Successfully opened cached Msi package.
[06/06/14 09:48:48] Opening Service Control Manager...
[06/06/14 09:48:48] Operation succeeded.
[06/06/14 09:48:48] Copying files...
[06/06/14 09:48:48] Checking and creating target directory C:\ProgramData\Microsoft\E-Business Servers Updates\Updates\Uninstall2799754.
[06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
[06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
[06/06/14 09:48:48] Package Workflow Manager 1.0 is installed.
[06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file TargetWFVersion.txt ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file UnifiedWFHotfixUpgrade.PS1 ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file Setup.xml ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file Setup.exe ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Package Workflow Manager 1.0 is installed.
[06/06/14 09:48:49] Package code is {04A7199E-565D-4654-88A3-80A9A7BADDD9}.
[06/06/14 09:48:49] Executing preinstall custom actions. 1 actions to execute.
[06/06/14 09:48:49] Starting process "C:\Windows\system32\..\sysnative\windowspowershell\v1.0\powershell.exe" -NoLogo -NonInteractive -NoProfile -WindowStyle Hidden -ExecutionPolicy RemoteSigned -File UnifiedWFHotfixUpgrade.PS1 -HotfixType "CS" -PackageType
"server" -opcode "PatchBefore" -platform "x64" ...
[06/06/14 09:48:50] Process exit code is -1.
get-itemproperty : Cannot find path 'HKLM:\Software\Microsoft\Service Bus\1.0'
because it does not exist.
At C:\ProgramData\Microsoft\E-Business Servers
Updates\Updates\Uninstall2799754\UnifiedWFHotfixUpgrade.PS1:971 char:21
+ $sbinstallpath = (get-itemproperty "HKLM:\Software\Microsoft\Service
Bus\1.0" ...
That's the log file
Best regards
Matthias -
SharePoint 2013 Configuration Access denied
Hi While configuring the SharePoint 2013, getting the following error.
System.InvalidOperationException: An error occurred while getting information about the user sp_farm at server <ADserver>: Access is denied
at Microsoft.SharePoint.Win32.SPNetApi32.NetUserGetInfo1(String server, String name)
sp_farm is a Domain User, and local admin, for SQL server this account have sysadmin rights, still having the issue please help.Basically SharePoint is trying to get information about this service account and access is denied. This is because you may be logged in on server and running Products and Configuration Wizard as a local user that does not have access to the AD OU to verify
the SP_Farm domain account.
Log out from sever and Log in again with "SP_Farm" user and re-launch the SharePoint Products and Configuration Wizard. Specify the SP_Farm account to connect to the SQL Database.Before you run the config wizard , please log in to SQL
Management Studio and remove the partially created farm database SharePoint_Config or use a different name the second time.
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
Access 2010 - Wizards not working after installing SP1
Hi Folks,
After upgrading my Office 2010 64 bit to SP1, I've started Access and now I receive a series of errors related to the Wizards, making the software useless.
Here is what's happening (testing done in new files \ new db's):
Case 1 - Trying to insert a button in a form, while the "Use control wizards" option is activated
ERROR1: The database cannot be opened because the VBA project contained in it cannot be read. The database can be opened only if the VBA project is first deleted. Deleting the VBA project removes all code from modules, forms and reports. You should back
up your database before attempting to open the database and delete the VBA project. To create a backup copy, click Cancel and then make a backup copy of your database. To open the database and delete the VBA project without creating a backup copy, click OK
if I click ok I get
ERROR 2: The code contains a syntax error, or a <DB_NAME> function you need is not available. If the syntax is correct, check the Control Wizards subkey or the Libraries key in the <DB_NAME> section of the windows registry to verify that the
entries you need are listed and available. If the entries are correct, either you must correct the <DB_NAME> Utility Add-In, or the file acWzlib or this wizard has been disabled. To reenable this wizard, run <DB_NAME> or Microsoft Office Setup
again to reinstall <DB_NAME>. Before you reinstall <DB_NAME>, delete the windows registry keys for the <DB_NAME> Utility Add-in and acWzlib.
Case 2 - Trying to insert a picture as button background (using the properties tab)
ERROR: "Microsoft Access can't start the wizard, builder or add-in"
What I did so far:
a) Checked the Wizard file (seemed ok - read \ edit permitted for all users)
b) Checked registry wizard entry (again - seems ok - no errors or bogus)
Right now I'm pretty desperate as I can't really use a lot of features. For the moment reinstall is not an option as I'm against a tight deadline. I would really appreciate any help \ support \ advice that can make this thing work.
P.S. - I forgot to mention that Access worked flawlessly before applying this SP1 - I'm really disappointed on how things turned out...
Cheers,Hello Everyone,
Thanks for taking the time to post the behavior you are experiencing in regards to this SP1 wizard issue.
Microsoft is aware of the issue and it is currently being investigated.
If you are running into this issue, you can go through the steps in the following KB article to resolve it:
2581301 - Acc2010: You receive an error in Microsoft Access using the built-in wizards after installing Microsoft Office 2010 SP1
http://support.microsoft.com/default.aspx?scid=kb;en-US;2581301
Best Regards,
Nathan Ost
Microsoft Online Community Support
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Missing templates after installing 10.1.3 - no diagrams
Hi,
Ive happily used 10.1.2 for UML Class diagrams etc recently, have downloaded the full install for 10.1.3 (as very interested to try out the Sequence diagrams).
After installing 10.1.3 I notice there are very few Application templates available (only "No template" and "Java App") - so there is no Diagram option under the General category when creating New.
What setup do I have to perform to activate the Diagramming options ?
Is this covered in the installation Readme anywhere ?
Thanks. Darren.Darren,
Glad that helped, if you have any comments or suggestions about the Sequence Diagrammer, please post any feedback you have and I will pass it on to the Developer.
Regards,
Lisa Sherriff
JDev QA -
Hi,
I'm using a SP2013 standalone dev server and I can´t find some web parts like XsltListViewWebPart and Data View Web Part.
I was expecting to find a category like "Lists and Libraries" or "Authoring" but I can´t find it.
I'm a site collection admin and have standard, enterprise and publishing features activated.
Shouln´t I see those Web Parts?
I noticed that I don´t have any file "XsltListViewWebPart.webpart" on my server file system. should it exists there?
Thanks,
DDHi,
If you want to add a XsltListViewWebPart into page via UI.
In SharePoint 2010, we can find in "Lists and Libraries" category.
In SharePoint 2013, the category named "Apps".
Best Regards
Dennis Guo
TechNet Community Support -
Missing folder after installing myapplication with AppBuilder 8.5
In the project property for the installer, I created a data-folder for my application. This folder is for later use with the myapp. So during installation its empty.
After installation on the target PC, I miss the folder. Only the folder with the myapp has been created.
My system: LV8.5 full, AppBuilder on winXP SP2
Any idea?
AndreasThe installer builder does not support creating an empty folder. It's a feature that's been requested for a while, and we'd like to add it, but it has not been a high priority feature. The workaround is to install a dummy file (0 bytes) to the folder. Or you could configure the installer to run a batch file that creates an empty folder. The downside to using the batch file, however, is that the uninstaller won't know to remove the folder.
-
Sharepoint 2013 sp1 web analytics integration app install problem
Hi,
I want to add Web Integration Services app to my sharepoint site, I already do the requirements for app structure.
When I try to install the app give me the error:
Operation failed.
Access denied. You do not have permission to perform this action or access this resource.
Any sugesstions?
Thanks,
Okan.
Hi Okan,
I tested the same scenario per your post and I got the same results as you got.
The app can work in the root site, but it cannot work in sub sites.
As this issue is regarding to the app, I recommend you to post your question to office store forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=officestore.
More experts will assist you, then you will get more information relation to the app.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Missing fonts after installing Illustrator CC
Illustrator CS5 and CS6 (and previous versions) came with a set of core fonts, e.g. Myriad Pro, included upon install.
I uninstalled Illustrator CS6 (and all other CS6 products) before installing Illustrator CC, but none of the fonts were included, so in Illustrator I have no MyriadPro (the font appears in the font list, but has an asterisk next to it to indicate a subsitution is being made). Are these fonts no longer included?
Okay - fixed. A restart later and the fonts are there. They must be registered with Windows on restart, which is an odd way of doing it as there's no requirement that the computer be restarted between font installations.
Message was edited by: tompagenetThanks for the reply, but the problem is deeper than that. After Illustrator CC, the font is invisible to every program except Illustrator CS6. So it appears that Illustrator CC has "removed" the font from my computer with the exception of Illustrator CC. In any case, I have thousands of documents that use this font. I'm not sure how I can deal with this.
-
Adobe X - Chinese font missing. After install still does not work
In adobe X when opening some pdf documents, adobe is asking for a chinese font. I have downloaded the font from the link in the message, but afterwards the same error message still appear - also after restart of the whole PC. Running windows XP
Is there somehow that I can check if this has been installed correctly or somewhere there are further logs ?Hi rossoneris,
Please check the 'Fonts' folder if you have installed Chinese fonts or not.
What error do you get when you try to open the pdf's?
Maybe you are looking for
-
Bridge (& Prelude & Media Encoder) included in a Premiere-only account?
Hi! I have a full CC account myself, but for a client of mine, I'm looking into different accounts. A production company I work for, is going to make the transition to Adobe CC. Because I have years of experience using it, they have asked me to overs
-
Hi i just want to read flat file and convert it into xml but there are some problem ,it throws a ArrayIndexOutOfBoundException.Here is code. import java.io.*; import java.util.*; class FlatXMLBudget { public static void convert(List data, OutputStr
-
Can we run one report from another Report in reports 6i
Actually my requirement is i want to run 4 reports from another report(driver report) by passing parameter same as the driver report. i want to see the out put on the screen report by report next to driver report output.is it possible?? actually i go
-
Data inconsistency in mc94 and md62
Hi Team, Data inconsistency in mc94 and md62. The values in MC94 is totally blank, but in MD62 values are found for the period which is the end of every month. Could you please help me in this issue?
-
Although we haven't had many problems with the new update we HATE it how can we uninstall the 9.0 version and go back to the 7.0