SharePoint 2013 creating new farm system.formatException ?

I have SharePoint 2013 and my farm is not working I wanted to create new farm it give error System.formatException
you can see my question and the image in here also:
http://sharepoint.stackexchange.com/questions/138926/i-want-to-create-new-server-farm-in-sharepoint-2013-it-give-validation-error 

Hi,
According to your description, my understanding is that you failed to create a new farm.
It seems that several issues exist in IIS. Please go to IIS manager > each site > advanced settings > general > ID to see if it is beyond int32 range or includes non-number value. Besides, please reset IIS and reboot the SQL server.
Please have a try to create new farm with power shell.
How to create new farm with power shell in SharePoint 2010:
https://habaneroconsulting.com/insights/create-a-sharepoint-2010-farm-with-powershell#.VTXDSHkcQ5c
Several similar posts for your reference:
https://social.technet.microsoft.com/Forums/en-US/658f6d99-60be-4e1d-b81b-7640eb5545f0/configuration-wizard-error-systemformatexception-was-thrown-input-string-was-not-in-correct?forum=sharepointadminprevious
https://social.technet.microsoft.com/Forums/en-US/a59993bb-abe0-44e6-89f6-a86f0dbdd23a/systemformatexception-input-string-was-not-in-a-correct-format-exception-when-creating-a-new?forum=sharepointadminprevious
http://stackoverflow.com/questions/14434926/sharepoint-products-technologies-configuration-wizard-system-formatexception
Best Regards,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • Fetching workflow status from Extended Properties in SharePoint 2013 sequential workflow (Farm solutions) option

    HI,
    I am using VS 2012, I have selected the option "sharepoint sequential workflow (Farm solution) option and not the workflow App model.
    Earlier in SharePoint 2010, the approver status column can be got from ExtendedProperties["TaskStatus"] and which contained either "#" or "@" as its value.
    However, in SharePoint 2013, the ExtendedProperties does not contain the "TaskStatus" key. In the quickwatch, i was able to see the value as "#" associated to some guid key. In the debug mode,i can see the below:
    (new System.Collections.Hashtable.HashtableDebugView(TaskPropertiesForManagerAfter.ExtendedProperties)).Items[12]
    But I’m not sure how to get to it from the code?
    How to retrieve the Task Status using ExtendedProperties in SharePoint 2013?
    Thanks

    Having problems getting SPD 2013 installed on my laptop because of a trial of O365, but I know in SPD 2010 you could find the BCC fields, etc... in the Advanced properties, it wasn't directly available via the common interface.  I know 2013 is very
    different from 2010, and if I can get it to install correctly, I will update, but look for an advanced property, or an XML view where you can find the FROM: field.

  • SharePoint 2010 - Create new site collection in existing web application with different existing content DB

    I have a SharePoint 2010 root level site collection SC1 in web application WEBAPP1. I want to create copy of that site collection in same web application WEBAPP1. Apart from Import/Export, Restore/Backup options, will following approach work? If yes , how?
    I took backup of content database of web application.
    Restored database with different name
    Mounted Content database to this WEBAPP1 by assigning new ID to DB
    Created new site collection by using this newly mounted DB
    Site collection gets created successfully but content does not appear.
    Please guide if i can achieve desired functionality by using this approach.
    If this helped you resolve your issue, please mark it Answered

    It is because the Site GUID is identical, and each GUID can only be present on the farm once. You can use Backup-SPSite/Restore-SPSite (which is full-fidelity, unlike Export-SPWeb/Import-SPWeb), which will generate a new GUID for the restore Site Collection,
    even in the same Web App.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • SharePoint 2013 resume "Paused by system" in C#

    Hello!
    I am writing a C# procedure for resume "Paused by system" in my SharePoint 2013 Crawl. This is the code:
                    string ssaName = "Search Service Application";
                    SearchContext context = SearchContext.GetContext(ssaName);
                    Content ssaContent = new Content(context);
                    ContentSourceCollection ssaContentSources = ssaContent.ContentSources;
                    //  Getting the content source
                    ContentSource cs = ssaContentSources["Local SharePoint Sites"];
                    if ( cs.CrawlStatus == CrawlStatus.Paused)
                             cs.ResumeCrawl();
                    string status = cs.CrawlStatus.ToString();
                    Console.WriteLine(status);
    The ConsoleWriteLine print "Crawling Starting", but in the Central Administration still  "Paused by System".
    Any ideas?
    Thanks to everyone.

    Hi,
    According to your description, you want to resume the content source which is paused.
    It could be achieved using PowerShell Command.
    I have a test with PowerShell Command in my environment and it works properly.
    Here is the code:
    $searchapp = Get-SPEnterpriseSearchServiceApplication "Search Service Application" 
    $contentsource = Get-SPEnterpriseSearchCrawlContentSource "Local SharePoint Sites" -SearchApplication $searchapp 
    $contentsource.ResumeCrawl()
    Here is a detailed article for your reference:
    http://blogs.technet.com/b/heyscriptingguy/archive/2010/09/28/how-to-use-sharepoint-2010-windows-powershell-cmdlets-to-manage-search-crawls.aspx
    Feel free to Reply the test result.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Unable to create New Business System

    Hi
    I Installed XI 3.0 and configuring as per the configuration guide.
    When I try to create Business System (SLD) I get the following error message.
    "Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
    Steps:
    Logon on to SLD
    Click on New Business System
    Name: XID  and click on Next
    Technical System Type: Web AS for ABAP
    Select System: XID on Hostname   and select Client
    Installed products: Choose all and click Nextt
    Integration Server:
    Business System Role: Integration Server
    Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
    Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
    How to create a Business system and assign the role of Integration Server?
    Thanks for the Help
    Raghu

    Hi RG,
          Once we had   same error ,due to some reason business system with role integration server deleted.
           It has been resolved by deleting XI technical system and recreating same after that  it allows to define new bussiness system with role as integration server .
    It might help you.
    Regards
    Santosh

  • Installation of SharePoint 2013 three-tier farm installation

    Is it an actual requirement that WFE1 and APP1 be separate servers (virtual or physical), or is recommended best practice?
    And more than that, I was going to make DC1, WFE1, and APP1 all reside on the same virtual server.  I'll take the spitballs, but again the question is:  does this violate a software/hardware system requirement as well as recommended best practice,
    or just the latter?
    Thanks.

    For SharePoint 2013, it is
    not supported to install SharePoint on a DC. While you can also place all VMs on a single virtual server host, you do need to take into consideration that you're putting all of your eggs in a single basket. If that host fails, so does everything with it.
    Consider clustering your virtual hosts with shared storage to at least provide failover capabilities.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Creating new Source system problem

    Hi there,
    System: BW 3.5 client 010, want  to connect to R/3 4.6c Sandbox client 0101
    we just refreshed our BW 3.5  sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
    Error:
    Logical system BIX010 exists already
    Message no. R3222
    Diagnosis
    The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
    For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
    I tried to create the system manually and automatically, still no luck.
    I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
    Does anyone knows where to look for?
    Thanks in Advance
    Kumar

    Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
    Regards,
    Juergen

  • Creating New Source System

    Hi All,
    I am trying to create a new source system in BW for the new R/3 client which is a copy of PRD.
    So now new R/3 client is 200 and also PRD is 200. I did all necessary steps and i found difficulty when i am assigning logical system based on client. I found key is only client, so as PRD system is already mentioned with client 200 i am not able to create new entries and i hope this causing me error.
    So by creating RFC destination directly in SM59 and when i tried to create it says PRD Client already available. Though i have specified new client server name.
    Kindly advise.
    This is quite urgent.
    Thank You.
    Best regards,
    Bhuvana.

    hi,
    it seems rfc connection between bw and r/3 not established properly, check with transaction sm59 (ask basis help if no authorization), choose r/3 source system rfc and menu test->authorization. check if user name and password, hostname/ip address are correct.
    this doc 'bw r/3 connectivity' may useful http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    hope this helps.

  • Creating New Source System Connection

    [First post, so go easy on me!]
    I have created a source system connection in BW QA, to an additional R3 QA client, but I am unable to assign any datasources to the new this new connection. [I know that I should have created the connection in DEV and transported through, but I need this connection for a small test, that won't be used again.]
    To get round this, do I need to have my BW & R3 clients 'opened' again, then transfer the 'Application Component Hierarchy' via RSA9, then 'Replicate Datasources' in BW. If not, does anyone have any suggestions?
    Thanks in advance.
    Scott

    Scott,
    You will have to transfer the BC datasources that you want to use from R/3 to BW.
    in BW, right-click your source system in the modeling tab and select replicate datasources, this will take you through to your R/3 system. Select the datasources you want to use and transfer them. Then go back to your BW system and right-click the source system and select "Transfer datasources". This should make them available.
    If when you have got through to R/3 to transfer the datasources you are told that cross-client customising is not available then I think that you will have to get the client opened up.
    Cheers,
    Stuart

  • Change Default Background User In BW When Creating New Source System

    Hi all,
    I would like to create a new Source System in RSA1.
    In Source Systems > SAP > Create > Connection of source system to BW
    the Default background user in BW is u201CALEREMOTEu201D.
    How do I change this to another user?

    Just want to say thank you. I could fix a problem with your information.
    I was searching to change the background user from ALEREMOTE to BWREMOTE as all our process chains were running on ALEREMOTE.

  • Creating new source system in bw

    hi all
    i have got one problem with creating source system to bw from r/3,i have created RFC connection to bw and r/3
    and i was trying to create source system manually and automated but it is not activating i'm getting fallowing error
    ...the fallowing errors occurred in the source systemrsar--mess no 374
    ....result of destination check timeout rsarmess no 375
    can any one help me on this please

    Hi!
    Check out the connection with defined RFC.if it is ok,then check out the privliges for the user using which yuor trying to create the source system.
    Best Regards
    Sunil.

  • Configure High Availability in SharePoint 2013 having Single Farm

    Hi All,
    we are having 2 SharePoint server having single farm and two databases in cluster.
    we need to Configure HA and NLB between these 2 SharePoint Servers.
    Please Help..!!

    If the database servers are in a cluster then all you need to do is configure Load balancing for the SharePoint servers.  Review this site for more information:
    http://technet.microsoft.com/en-us/library/cc748824.aspx 
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Steps for creating new source system

    Hi guys
    We are on BI 7 and ECC 6 now...We are planning to get the data from other source systems (R/3 4.6)which are existed in different place.
    Now my question is what are the steps to get the data from this new Source system and whats BI developer role for this...
    Example: Inorder to establish the connection between BI and R/3 we need an RFC connection (Is this done by BASIS / BI )? If its BI , then what do I need to ask for ?
    afterthat what are all the questions or points that I need to raise to the folks in the meeting...
    Please advice
    regards

    Hi
    refer to this link below
    http://help.sap.com/saphelp_nw04s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
    Exactly this will be taken up by BASIS team so that at any time if we have any issues with RFCs like RFC connection failure we will not get any data to our targets.
    Then we have to raise ticket to basis stating this failure

  • Create new file system

    When i am trying to create new filesystem with #newfs /dev/rdsk/c0t0d0s4 getting the error message
    device busy ,
    please help me what to do

    The message "device busy" means what it says. Since newfs trashes any data on the device you specify, it is a good thing that this check is made. A typo could a major loss of data without such a safeguard. First, check that you have entered the device name correctly. If it is correct, you can run the format command and select the device in queustion. The format command should report which slices (that is, partitions) on the device are busy and for what. For example:
    # format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <DEFAULT cyl 38307 alt 2 hd 16 sec 255>
    /pci@1f,0/pci@1,1/ide@3/dad@0,0
    Specify disk (enter its number): 0
    selecting c0t0d0
    [disk formatted, no defect list found]
    Warning: Current Disk has mounted partitions.
    /dev/dsk/c0t0d0s0 is in use for live upgrade /. Please see ludelete(1M).
    /dev/dsk/c0t0d0s1 is currently used by swap. Please see swap(1M).
    /dev/dsk/c0t0d0s4 is in use for live upgrade /var. Please see ludelete(1M).
    /dev/dsk/c0t0d0s5 is part of active ZFS pool z. Please see zpool(1M).
    /dev/dsk/c0t0d0s6 is currently mounted on /. Please see umount(1M).
    /dev/dsk/c0t0d0s7 is currently mounted on /var. Please see umount(1M).
    (the menu appears here)
    As you can see, this disk has several slices (partitions) in use for various purposes. This command should give you the information you need. This is the most generic way I know of obtaining this information; otherwise, you'd have to search for the device using commands like df, mount, swap, metastat, metadb, etc.

  • When connecting to a server farm in sharepoint foundation 2013 cannot create new farm error: One or more types failed to load

    When trying to create a new server farm in the sharepoint foundation 2013 we get a following error :
    The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered.
    PS C:\Users\Administrator> New-SPConfigurationDatabase
    cmdlet New-SPConfigurationDatabase at command pipeline position 1
    Supply values for the following parameters:
    DatabaseName: SharePoint_Config
    DatabaseServer: PC78\SQLEXPRESS,25111
    FarmCredentials
    Passphrase: *********
    New-SPConfigurationDatabase : One or more types failed to load. Please refer
    to the upgrade log for more details.
    At line:1 char:1
    + New-SPConfigurationDatabase
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase:
    SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPUpgra
    deException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon
    figurationDatabase
    And the error log is shown below :
    Microsoft.SharePoint.Upgrade.SPUpgradeException: One or more types failed to load.
    Please refer to the upgrade log for more details.
    at Microsoft.SharePoint.Upgrade.SPActionSequence.LoadUpgradeActions()
    at Microsoft.SharePoint.Upgrade.SPActionSequence.get_ActionsInternal()
    at Microsoft.SharePoint.Upgrade.SPUtility.GetLatestTargetSchemaVersionByMajorVersion(Type typeActionSequence, Int32 majorVer)
    at Microsoft.SharePoint.Upgrade.SPUtility.get_CurrentSPSiteWssTargetSchemaVersion()
    at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, Strin... b712a522-fa85-49eb-b59c-dedf55295504
    ...g secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName, Boolean overrideCompatibilityRestriction)
    at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, Boolean useHostHeaderAsSiteName)
    at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, ... b712a522-fa85-49eb-b59c-dedf55295504
    ...String farmUser, SecureString farmPassword)
    at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
    at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
    at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
    at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuil... b712a522-fa85-49eb-b59c-dedf55295504
    ...der configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
    at Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase.InternalProcessRecord()
    at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() b712a522-fa85-49eb-b59c-dedf55295504
    Error Category: InvalidData Target Object Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase Details NULL RecommendedAction NULL b712a522-fa85-49eb-b59c-dedf55295504
    Leaving ProcessRecord Method of New-SPConfigurationDatabase. e9ae5ba6-c499-0000-d35c-aee999c4cf01
    we are using server 2012 R2 and we don't have office 2010 installed

    Yes,SQL server is on the same server as SharePoint 
    SQL has both the permissions Securityadmin
    and  DBcreator roles on SQL Server.
    When we run those sharepoint management shell commands the database  will be created with the error
    msg (shown in attachment)

Maybe you are looking for