Sharepoint 2013 - Display Disclaimer when a MySite is created
Hallo there,
i spent the whole day searching the web for something i thought i already found some time ago, but cannot remember where...
Maybe you guys can help...
We need to Display some Kind of disclaimer / Terms of usage when a user initially creates his mysite. Best solution would be to Display a Website with a "Yes" / "No" choice... Clicking "Yes" would continue to create the
users mysite - "No" would cancel the process.
is there any way to do this?
Thanks in Avance!
Phife
Hi Phife,
When we first time to click "About me" menu to create MySite, it will pop up "Let's get social" dialog, I think you may have found this dialog some time ago.
If you want to popup other disclaimer dialog when you click "About me", I think you can try customizing it's event to judge if MySite hasn't been created then pop up the custom disclaimer dialog with Yes/No choices for creating mysite agreement, then perform
the proper action based on the Yes or No.
http://paulliebrand.com/2014/02/26/sharepoint-2013-get-the-most-out-of-sharepoint-dialog-explained/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support
Similar Messages
-
Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSPHi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
How to have SharePoint 2013 open Excel when opening an XLSX file?
Hello,
I have SharePoint 2013 and Excel 2010 files in SharePoint. When I click on the Excel file, it opens the Excel spreadsheet within the
browser, and does not open the Excel application. I have to click a button to get SharePoint to open the file in Excel.
How can I change this for all users in a site collection, so when they click on the Excel file, Excel is opened with the file?
PaulHi Paul,
Do you have Office for Web Configured, if so you can override the behavior by using PowerShell Cmdlets -
New-SPWOPIBinding and
Set-SPWOPIBinding
see here for more information
Set the default open behavior for browser-enabled documents (Office Web Apps when used with SharePoint 2013)
http://technet.microsoft.com/en-us/library/ee837425(v=office.15).aspx
or activate Open Documents in Client Applications by Default in Site Settings->Site Collection Adminstration ->Site Collection Features
alternatively you can also run the below powershell cmdlet to activate the feature (from the above link)
for specific site collection
Enable-SPFeature 8A4B8DE2-6FD8-41e9-923C-C7C3C00F8295 -url <SiteCollURL>
for all site collection
Get-SPSite -limit ALL |foreach{ Enable-SPFeature 8A4B8DE2-6FD8-41e9-923C-C7C3C00F8295 -url $_.URL }
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
Page cannot be displayed - error when a view is created
Hi all,
I am new to webdynpro. I am trying to craete a webdynpro application. when a view is created i am not getting the login popup and the layout shows "Page cannot be displayed". I am connected through the router string. The same when i try in the local system i am able to view the layout. The services are activated in sicf.
Pls guide me to resolve this issue. Is it neccessary that the host name has to be added in my machine also? Because the host is added in the server machine.
Thanks in advance,
NeelaHi,
Try following thing:
Make sure that proxy settings are up to date, for this
i) Get the link of application
ii) Copy the part till .com e.g. abc.def.com
iii) Open internet explorer
iv) Goto Tools-> Internet Options-> Connections-> LAN Settings-> Advanced->
v) Add link of application in 'Exceptions' part as *.def.com
Regards,
Saket -
SharePoint 2013 Foundation error when uploading Excel files
Hello
I have a specific problem. I have an xlsx file that I cannot upload in SharePoint. Normally our SharePoint can upload Excel files and other file formats normally but this one has data with nearly 5000 rows. The size of the file is less then 500 KB. The error
message is: "The URL is invalid. Perhaps it refers to a nonexistent file or folder, or it refers to a valid file or folder in the current Web." When I am uploading this file I am getting the same error message in every library. When I save
the file as a 97-2003 compatible xls then it works. Sometimes even Excel files with Macros won't upload.
Kind regards
ivicapro1987Hi,
This issue occurs when the Version column is configured as an Indexed Column.
To work around this issue, remove the Version column from the list of Indexed Columns for the list that has this issue. To do this, follow these steps:
Browse to the list where the issue exists.
In the ribbon, click the Library tab, and then click
Library Settings.
In the fields list, click Indexed Columns.
In the Indexed Columns list, click Version.
Click Delete, and then click OK.
Upload any files that you previously experienced the issue with.
Reference:
https://support.microsoft.com/kb/2796640?wa=wsignin1.0
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Custom web parts in SharePoint 2013 becomes inactive when the session is idle for long time.
Hi,
We have a search center site with custom web parts and custom master pages. When the session is inactive for long time all the custom web parts in the page doesn't work, unless we close the browser and open it. Where as this is not the case with the
OOB web parts. We are not able to identify the root cause as it works with OOB web parts and not the custom web parts.We were able to find that by increasing the session timeout of the web application we can avoid this issue.We do not want to increase the
session timeout as the OOB web part works perfectly even when the user session is idle for long time.Is there any other alternative where we can acheive the same for custom web parts when the session is idle for long time?
Thanks,
SaranyaHi Saranya,
According to your descirption, my understanding is that when the session is long time idle ,then custom web part will not work.
I suggest you check if you have enable the session in the Page Level in the web.config. By default SharePoint disable the session state.
In the web.config, you will see <page enableSessionState> tag. You can modify like below and test if it works.
<pages enableSessionState=”true” ….. />
Here is a detailed thread for your reference:
Use Session State in SharePoint
Best Regards
Zhengyu Guo
TechNet Community Support -
Customizng SharePoint 2013 Display Template
hi i am trying to customize Item_Picture3Lines.html and result not appear Note i am using content search web part and change query to specific content type it returns result but my display template does not render data i am trying to add Line 4 but no
result appear My Code Sample :-
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>Display Template</title>
<!--[if gte mso 9]><xml>
<mso:CustomDocumentProperties>
<mso:TemplateHidden msdt:dt="string">0</mso:TemplateHidden>
<mso:ManagedPropertyMapping msdt:dt="string">
'Picture URL'{Picture URL}:'PublishingImage;PictureURL;PictureThumbnailURL',
'Link URL'{Link URL}:'Path',
'Line 1'{Line 1}:'Title',
'Line 2'{Line 2}:'Description',
'Line 3'{Line 3}:'',
'Line 4'{Line 4}:'',
'SecondaryFileExtension',
'ContentTypeId'
</mso:ManagedPropertyMapping>
<mso:MasterPageDescription msdt:dt="string">This Item Display Template will show a 100x100 picture of the item on the left. The title and the default item description will display to the right of the picture with an additional line that is available for a custom managed property.</mso:MasterPageDescription>
<mso:ContentTypeId msdt:dt="string">0x0101002039C03B61C64EC4A04F5361F385106603</mso:ContentTypeId>
<mso:TargetControlType msdt:dt="string">;#Content Web Parts;#</mso:TargetControlType>
<mso:HtmlDesignAssociated msdt:dt="string">1</mso:HtmlDesignAssociated>
<mso:HtmlDesignStatusAndPreview msdt:dt="string">http://c1-dev02/sites/ContentSearchWebPart/_catalogs/masterpage/Display Templates/Content Web Parts/Item_Picture3Lines - Copy.html, Conversion successful.</mso:HtmlDesignStatusAndPreview>
<mso:HtmlDesignConversionSucceeded msdt:dt="string">True</mso:HtmlDesignConversionSucceeded>
</mso:CustomDocumentProperties>
</xml><![endif]-->
</head>
<body>
<!--
Warning: Do not try to add HTML to this section. Only the contents of the first <div>
inside the <body> tag will be used while executing Display Template code. Any HTML that
you add to this section will NOT become part of your Display Template.
-->
<script>
$includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
</script>
<!--
Use the div below to author your Display Template. Here are some things to keep in mind:
* Surround any JavaScript logic as shown below using a "pound underscore" (#_ ... _#) token
inside a comment.
* Use the values assigned to your variables using an "underscore pound equals"
(_#= ... =#_) token.
-->
<div id="Item_Picture3Lines - Copy">
<!--#_
var encodedId = $htmlEncode(ctx.ClientControl.get_nextUniqueId() + "_picture3Lines_");
var linkURL = $getItemValue(ctx, "Link URL");
linkURL.overrideValueRenderer($urlHtmlEncode);
var line1 = $getItemValue(ctx, "Line 1");
var line2 = $getItemValue(ctx, "Line 2");
var line3 = $getItemValue(ctx, "Line 3");
var line4 = $getItemValue(ctx, "Line 4");
var pictureURL = $getItemValue(ctx, "Picture URL");
var pictureId = encodedId + "picture";
var pictureMarkup = Srch.ContentBySearch.getPictureMarkup(pictureURL, 100, 100, ctx.CurrentItem, "cbs-picture3LinesImg", line1, pictureId);
line1.overrideValueRenderer($contentLineText);
line2.overrideValueRenderer($contentLineText);
line3.overrideValueRenderer($contentLineText);
var containerId = encodedId + "container";
var pictureLinkId = encodedId + "pictureLink";
var pictureContainerId = encodedId + "pictureContainer";
var dataContainerId = encodedId + "dataContainer";
var line1LinkId = encodedId + "line1Link";
var line1Id = encodedId + "line1";
var line2Id = encodedId + "line2";
var line3Id = encodedId + "line3";
var line4Id = encodedId + "line4";
var dataDisplayTemplateTitle = "ItemPicture3Lines";
_#-->
<div class="cbs-picture3LinesContainer" id="_#= containerId =#_" data-displaytemplate="_#= $htmlEncode(dataDisplayTemplateTitle) =#_">
<div class="cbs-picture3LinesImageContainer" id="_#= pictureContainerId =#_">
<!--#_
if(!linkURL.isEmpty)
_#-->
<a class="cbs-pictureImgLink" href="_#= linkURL =#_" title="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureLinkId =#_"
>
<!--#_
_#-->
_#= pictureMarkup =#_
<!--#_
if(!linkURL.isEmpty)
_#-->
</a>
<!--#_
_#-->
</div>
<div class="cbs-picture3LinesDataContainer" id="_#= dataContainerId =#_">
<a class="cbs-picture3LinesLine1Link" href="_#= linkURL =#_" title="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= line1LinkId =#_"
>
<h2 class="cbs-picture3LinesLine1 ms-accentText2 ms-noWrap" id="_#= line1Id =#_"> _#= line1 =#_</h2>
</a>
<!--#_
if(!line2.isEmpty)
_#-->
<div class="cbs-picture3LinesLine2 ms-noWrap" title="_#= $htmlEncode(line2.defaultValueRenderer(line2)) =#_" id="_#= line2Id =#_" > _#= line2 =#_</div>
<!--#_
if(!line3.isEmpty)
_#-->
<div class="cbs-pictureLine3 ms-textSmall ms-noWrap" id="_#= line3Id =#_" title="_#= $htmlEncode(line3.defaultValueRenderer(line3)) =#_">_#= line3 =#_</div>
<!--#_
if(!line4.isEmpty)
_#-->
<div class="cbs-pictureLine3 ms-textSmall ms-noWrap" id="_#= line4Id =#_" title="_#= $htmlEncode(line4.defaultValueRenderer(line4)) =#_">_#= line4 =#_</div>
<!--#_
_#-->
</div>
</div>
</div>
</body>
</html>Was looking for something else and stumbled across this... I'm sure you've sorted this out by now, but the problem, i think is that you're not specifying a data source (list/site column) for the Line 4 data field...or line 3 for that matter... See lines
14 and 15 in your code sample. There should be a field reference between the ' '. -
SharePoint 2013 access to custom lists a user creates
In an InfoPath custom list form 2013, I have setup a group of test users with 'view' access to my test SharePoint website. These users are able to enter data in a custom list.
When the user looks at the data that they originally entered by accessing the data from the sharepoint website, the InfoPath Form looks like the form is read only. However if the user clicks the auto generated edit buttons on the top of the form, they are
able to change the data in the list.
Basically I would like a way for the user to not be able to change the original data in the custom list.
Is there a way that I can accomplish this goal like:
1. disable the autogenerated buttons,
2. have all the textboxes set as read only,
3. change some kind of an access level?
Would you let me know what method works and how to accomplish my goal?In InfoPath Designer go to File, Info, Form Options.
In the Web Browser category uncheck Show InfoPath Commands in Ribbon or Toolbar.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner -
Standard buttons not displaying ALV when added button by creating PF status
Hi All,
I have added a button(using SE41) in application toolbar for ALV grid using Factory method.But the problem is I am unable to see the standard tool bar buttons(Layout,Download,Mail etc).
Even I tried adding buttons(using standard FCODES) to the PFstatus.Now the buttons are visible but the functionality is not working for all buttons.Its working only for Graphic and Change layout buttons.
Can any one suggest...??
-PhaniramDisregard DKS's response...that's the older stuff and you're using NetWeaver ALV.
In SALV you can cause those buttons to appear, but you may need to copy the SALV_STANDARD GUI from one of the SALV* named program using SE80...sounds like you have that part, but you may need to turn functions ON...
Perhaps something like this would help:
data: gr_f_list type ref to cl_salv_functions_list,
gr_alv type ref to cl_salv_table,
SALV toolbar & GUI functions
gr_f_list = gr_alv->get_functions( ). "Get Toolbar functions
gr_f_list->set_all( abap_true ). "All On
gr_f_list->set_view_lotus( abap_false ). "Lotus 123 off
gr_f_list->set_view_excel( abap_false ). "Excel in Place Off
gr_f_list->set_graphics( abap_false ). "Graph tool off
For undesired buttons, set each tool OFF after turning all ON. -
InfoPath Filler 2010 will not open a form in SharePoint 2013
I'm having a problem with the coexistence of SharePoint 2013 and Office 2010, specifically InfoPath.
We are running SharePoint 2013 Standard, so we do not have access to web-enabled InfoPath forms, which is okay since all of our client machines have InfoPath Filler as part of their Office 2010 install.
The problem is I have created a form and published it to a SharePoint 2013 library but when I try to create a new document in the library I get a page cannot be displayed error or the page just hangs.
However, as a troubleshooting step, I installed InfoPath 2013 on my client machine and when I access the library and create a new document it opens the form successfully.
I've changed the settings of the library so it uses the client application instead of trying to open in the browser, I've changed the trust settings to every possible configuration I can think of but I cannot get InfoPath 2010 to open a form published to
SharePoint 2013.
Is this a known compatibility issue, a bug, or am I missing something?
Thanks,
KevinI encountered this issue recently. Some of our suers have upgraded to Office 2013 but a lot still are on office 2010. I did not want a solution that relied heavily on the users to do something, like upgrade to 2013 or modify 2010. That's not ideal.
I realized the solution was very simple. I edited the InfoPath template within the document library in sharepoint > Form Options > Compatibility, change it to InfoPath filler form 2010. It still works for me and I have version 2013, so now it allows
users with older versions to use it as well. I confirmed with the affected users that they can now access the form. -
Sharepoint 2013 - Search for link names on a single page
Hi
I am messing around with SP13 and trying to get my search result web part to only search for link names and display all results.
I have created the search source to point at the sub site. If I search for part of a link name it will list all links in one long row as a single result.
Example: One single page contains all links. Each link points to a .aspx page. The search source is pointing at this page and it can display results but only as a single result containing all links as one line of text.
Say I have 1000+ links of which 50 has names such as Link1-Item1-Basket1, Link1-Item1-Basket2 up to Link1-Item1-Basket50.
When I search for Link1-Item1 I would like my search results to display 50 results as 50 individual links.
Is this possible?Hi,
Yes, you can format the search results as you expected. But you have to create a custom display template to format your results such as extract the links from each results and display it as separate link.
Once display template created you have to map the display template to your search results web part.
Please refer to the following articles.
SharePoint 2013 Customize Display Template for Content By Search Web
Part (CSWP) Part-1
Introduction to SharePoint 2013 Display Templates
Display Template Overview
Please mark it answered, if your problem resolved. -
Custom Ranking model in SharePoint 2013
Hi,
I need to improve the search results in SharePoint 2013. Can any one help me with the below requirement?
a. Improve rank for a sharepoint list. We have a list called profiles that contains users information. Right now, when searched using profile name, the results is displayed at the end. I need to promote it to the top.
b. Improve rank for some sites. We have created some new sites and i need the results from that new sites to appear at the top of search results.
Please suggest me some options. Thanks.Hi
You can watch the Microsoft SharePoint conference video on "Optimize Search Relevance in SharePoint 2013"and there was demonstrate how to create new custom rank model using tuning tool Publish new model.
Please go through this video...
http://channel9.msdn.com/Events/SharePoint-Conference/2012/SPC145
Thanks
Basant Pandey
Blog: sharepointfordeveloper.blogspot.com -
If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction. To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue. Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows. A solution that involves Visual Studio import would work fine
for me.
EarllibbyApparently you did not read my question very carefully. The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby -
Wiki page layout with multiple rows in SharePoint 2013 foundation?
We have a SharePoint 2013 foundation version and a requirement to create custom wiki pages with predefined templates. SharePoint provides template with header, footer and middle row out of which only middle row can have more than one column, we need more
than that. Can anybody help us in achieving this?Thank you for your reply Inderjeet.<o:p></o:p>
Actual problem is with wiki page custom templates, we have created some custom templates and they work fine, please refer below link for implementation
details
http://blog.hompus.nl/2012/06/07/provisioning-a-default-layout-and-content-when-adding-a-wiki-page/
If we want to create a little complicated templates as shown below, we are finding it difficult with only one table provided by
wiki layout. Can we add multiple table inside a template? if yes, how to do that? if not, how to create template like below. -
SharePoint 2013 audit log unexpected error
In one of my SharePoint 2013 site collection, when i try to save a audit log, i get unexpected error. It worked fine before last week and no any special setting has been applied before the issue appeared. The issue doesn't appear in other site collection.
i have tried to reproduce the issue with farm admin account and site collection admin, no success for all these accounts. However, i can see access denied error in the ULS log although i think the permission is not the problem. You may check the ULS log below.
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xC33B005
2jtj Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Unified Logging Service c91s
Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtk High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D00B
2jtq High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jx8 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s03 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
5s02 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
0x2918 0xEB2D005
2jw0 High
Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 06/19/2014 10:48:07.68, Original Level: Verbose] SQL connection time: 0.064296296654057
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General 8nca
Medium Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32
errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
Runtime tkau
Unexpected System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在
System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44
06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
0x2918 SharePoint Foundation
General ajlz0
High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)
在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)
在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ea429c9c-4288-00dd-4f6f-d2bb079f3d44i have added the account to the local admin group of SQL Server and SharePoint Server. the issue remains. it is the system admin of the SQL server.
Logging Correlation Data
Medium
Name=Request (POST:https://xxx/_layouts/15/CustomizeReport.aspx?ReportId=df9e0f20-f356-4115-9286-ac6eecbc03ce&Category=Auditing)
Authentication Authorization
Medium
Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|tlw\farmadmin, ClaimsCount=28
Logging Correlation Data
Medium
Site=/
Information Rights Management
Medium
Information Rights Management (IRM): Requesting user is System account.
Files
High
UserAgent not available, file operations may not be optimized. 在 Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean
disposeIlb) 在 Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) 在 Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) 在 Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) 在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) 在 Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
String& redirectUrl, Boolean& ObjectIsList, Guid& listId) 在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
bytes) 在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound) 在 Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
virtualPath) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) 在 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate) 在 System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
在 System.Web.UI.Page.ApplyMasterPage() 在 System.Web.UI.Page.PerformPreInit() 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest() 在 System.Web.UI.Page.ProcessRequest(HttpContext context)
在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 在 System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error) 在 System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) 在 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) 在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) 在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
Files
Medium
Spent 0 ms to bind 29783 byte file stream
Monitoring
High
Leaving Monitored Scope (GetFileAndMetaInfo). 执行时间=17.6751425083646
Monitoring
High
Leaving Monitored Scope (GetWebPartPageContent). 执行时间=17.8435806939653
OpenXml
Medium
OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\FarmAdmin\AppData\Local\Temp\tmpBFE2.tmp, fcm=3)
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:33.08, Original Level: Verbose] SQL connection time: 0.0727483919888626
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:35.00, Original Level: Verbose] SQL connection time: 0.07969118458531
Database
High
[Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
0xC33B005
Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xC33B005
Assert
ShipAssert location: (0) condition: StackTrace: at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
Unified Logging Service
Monitorable
Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D00B
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
0xEB2D005
High
Metro library failure (0x80070005):
Database
High
[Forced due to logging gap, cached @ 06/20/2014 14:36:36.86, Original Level: Verbose] SQL connection time: 0.0706353681551612
General
Medium
Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode,
IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean
disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Runtime
Unexpected
System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing)
在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close() 在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
General
High
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
(STG_E_ACCESSDENIED)) 在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) 在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset,
Int32 cb) 在 System.IO.BufferedStream.FlushWrite() 在 System.IO.StreamWriter.Dispose(Boolean disposing) 在 System.IO.StreamWriter.Close() 在 System.Xml.XmlTextWriter.Close()
在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose() 在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable
query, SPFolder folder, ReportNameGenerator reportNameGenerator) 在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e) 在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument) 在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.HandleError(Exception e) 在 System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 在 System.Web.UI.Page.ProcessRequest()
在 System.Web.UI.Page.ProcessRequest(HttpContext context) 在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 在 System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously)
Maybe you are looking for
-
Safari seems not sending If-Modified-Since header for main address
Not sure I'm in the appropriate forum but let's try (if there is more appropriate one please advise). When Safari requests a resource (page, image...) to a web server it doesn't provide If-Modified-Since header for the main resource of the request. T
-
Dear All, Please guide me on following configurations in TRANSPORTATION: Q1. How to configure Tracking of the goods movement by LR? Purpose: a)Delays in dispatch by LR to be tracked b) Pilferage to be tracked by LR Q2. How to do Freight accou
-
Why my simple vector file is so big
Hello, i have many simple vector files, created in CS6 that are over 15MB. i had deleted all swatches, brushes and symbols. I jusc cant figure out why those files are so big heres an example: and the .ai file weight is 17,1 MB link to the file: http:
-
Gmail IMAP "Copying message" feedback loop
Yesterday I sent an email with 10mbs of attachments from mail.app through gmail imap. after the message sent, I noticed that the spinning icon next to the gmail inbox was perpetually spinning. in the 'activity' window, it says: Gmail Synchronizing wi
-
Since installing the sling player add-on i get a certificate error and am worried about a virus
i downloaded and installed the sling player add-on to be able to watch dishnetwork programming on my computer. i now get the following error after firefox start-up: from firefox screen: "Secure Connection Failed beta.sling.com:443 uses an invalid sec