Sharepoint 2013 not installed yet, so should I install Sharepointg Integrated mode on my SQL server right now?
I'm installing SQL 2008 R2 onto a Windows 2008 R2 server in preperation for a Sharepoint 2013 install.
In the midst of the SQL installation here I have the option of installing the Sharepoint Mode Default Configuration.
Should I do this or should I continue installing with native mode dafeult configuration. Then perhaps adding the Sharepoint integration afterwards.
What would you advise?
You did not mention if you are planning more than 1 server, but best practice would dictate so.
If true, then, do NOT install the SRS components (presume you mean those) on the SQL box.
If you are planning to have BOTH SSRS in Native mode and also a 2nd instance in SharePoint mode, then you "may" elect to install the SSRS Native mode elements on your SQL Server.
You want to install the SSRS instance in SharePoint mode on one of your SharePoint servers.
The requirement for SSRS in SharePoint mode is that it be placed on a SharePoint server. You have two options:
1. Make your SQL Server a full fledged SharePoint server in order to use SSRS in SharePoint mode (not recommended)
2. Setup SSRS on a SharePoint server (recommended)
Hope this helps,
Thanks, Eric S. Pcubed
Similar Messages
-
Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al BalushiHi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said
-
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample> -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMELHi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL -
From the past 3days,i can't install apps from the appstore,it says "this items can't be purchased right now,try again later", please help me,thank you
Hey Kay97,
These are some troubleshooting steps that might be relevant to your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
I updated to ios5 on another computer because i was stuck on the recovery mode loop but now the problem is that when i try sync to my current one iphone does not show up or sync at all.. any ideas? gonna try uninstall right now..
There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content. -
SharePoint 2013 March Update Installation Error: Failed to install application content files
Hi,
I've been trying to install SharePoint 2013 March Update. After installing when I ran the configuration wizard, I get the following error:
Task applicationcontent has failed with an unknown exception
Exception: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Has anyone found the issue?
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.comThis is very painful situation .I was stuck on this till 2days and did goggling a lot.But didn't get the solution .I tried so many ways but no success .So finally I removed all the config and XML files from the C:\Program Files\Common Files\microsoft shared\Web
Server Extensions\15\CONFIG and run the PSConfig wizard again.This time got success finally .really unexpected. -
Machine translation service in SharePoint 2013 not working
We have configured a Multilingual Site in SharePoint 2013.
Created source site in English (en-us) and other language site in Spanish (es-es). In Spanish site first time machine translation initiated successfully and after a while we checked the variation log status it’s showing Translation Status
as “Error” for that page. Checked the variation logs list in root site collection and found as below:
Title
Created
Modified
Success Messages
Errors Encountered
Translation Export
14-01-2013 16:15
14-01-2013 16:15
Translation export started processing work item.Started exporting list /sites/Variations/es-es/Paginas.Created translation package /sites/Variations/Translation Packages/SHAREPOINT_system/es-es-Paginas-20130114T1044480000Z-0/es-es-Paginas-0001.xlf.Export
for item /sites/Variations/es-es/Paginas/About-Us.aspx succeeded.Term About Us in term set Variations Navigation (es-es) has no translatable content.Created machine translation job 00000000-0000-107d-80f6-fe3012e14a82.Translation export finished processing
work item.
Translation Import
14-01-2013 16:30
14-01-2013 16:30
Translation import started processing work item.Machine translation job 00000000-0000-107d-80f6-fe3012e14a82 completed.Translation import finished processing work item.
Machine translation of package /sites/Variations/Translation Packages/SHAREPOINT_system/es-es-Paginas-20130114T1044480000Z-0/es-es-Paginas-0001.xlf failed with error message: The file could
not be downloaded from the SharePoint library because the user's permissions have changed. Please contact your system administrator to determine how permissions can be restored..
Next time onwards if we try to initiate machine translation its showing following error:
No se puede completar la operación actual. Vuelva a intentarlo o póngase en contacto con el administrador del sistema.
Error durante la traducción porque el servicio de traducción en línea no estaba disponible. Reenvíe este archivo para la traducción. Si se vuelve a producir
el error con el archivo con este mensaje de error, póngase en contacto con su administrador del sistema.
Puede reintentar la operación, pero primero tendrá que borrar los datos a medio crear. Si el problema persiste, póngase
en contacto con el administrador del sistema.
Identificador de correlación: 7d96f59b-3506-a08f-efbe-d9fbcec2f8d3
Fecha y hora: 17/01/2013 12:09:10
We have configured machine translation service using the technet link:
http://technet.microsoft.com/en-us/library/jj553772.aspx
As per the prerequisite everything is done except: server-to-server authentication and app authentication.
We are not very sure why this is required and with which server we need to configure server-to-server authentication.
Regarding this error we verified below link and everything is in place as suggested.
http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
Any kind of help or suggestion is much appreciated. Thanks in advance!!
.Net DevoloperHi.
Just wondering, since it seems to be about permissions, did you see this in the TechNet article:
Important:
The account that is used by the application pool must also have Full Control permissions to the User Profile service application. If you create a new application pool and a new account, make sure that
you add the account to the list of accounts that can use the User Profile Service Application, and grant Full Control permissions to the account. For more information, see
Restrict or enable access to a service application (SharePoint 2013).
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download 'The SharePoint Branding Project' here
Download 'The final guide to Alternate Access Mappings' free whitepaper here
Download 'The final guide to SharePoint 2010 Site Settings' free whitepaper here
Download 'The final Kerberos guide for SharePoint technicians' free whitepaper here -
SharePoint 2013 Not Loading CSS On Site Template
Hi
I have a question regarding adding a site collection with a custom template ( by selecting a template later option)
Basically I have a site that I need to move over from one server to another. The template saves as a template no problem with all lists etc.
When adding the site collection, I choose custom and select template later. After going to the site collection it then asks to pick a template, after which I choose solution gallery and upload and activate the site template I made before. I then return to
template picker page and choose the custom template uploaded
The problem I am having is that when the template is chosen and being used it does not load any of the css or anything. Everything is just listed downwards and all jumbled up all over the place.
Both servers are running SP2013. The Site Template doesnt have any major things on it apart from some custom new/edit forms and normal SPD 2013 Workflows.
Any ideas on how I can get the CSS to load?Hi
you can check if css have loaded but isn't the last one !
to do this use a dev tool ( F12 in IE ) and check for an element if a style from your custom css file is there and overwrited by other css file )
For more details check this doc
http://blog.blksthl.com/2013/02/26/a-guide-to-quick-sharepoint-2013-branding/
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you. -
What should I use BCS or directly connect to sql server to get data.
Hi All,
I have a requierment where the data is in the sql server.
We are using sharepoint webpart to show the data from the sql.
Should i get the data from the sql server using connection string.
Is there any better way to get data from Sql server table and show that in the custom asp.net form.
Regards
VinodAs I see the questions is in SharePoint 2013 forum.
Assuming you have SharePoint 2013/2010, you can create Create/Read/Update/Delete operations on directly sql table using BCS service of SharePoint. That will save you default development of web part and handle all information properly.
If you don't want to use BCS and sql (not sharepoint sql) information required, you can create custom web part/app part.
Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query. -
SP 2013 - Database Recovery Mode When Using SQL Server Mirroring
Hello Community,
Our DBA is configuring a High Availability Architecture for our SharePoint 2013 Farm. Essentially he is using SQL Server Database mirroring with a clustered automatic failover using a witness server. He has informed me that mirroring requires
that the databases are set to Full Recovery Mode, but that several of the databases are set to Simple Recovery Mode, the databases are the following:
SearchService_DB
SearchService_DB_CrawlStore
SearchService_DB_AnalyticsReportingStore
SearchService_DB_LinksStore
WSS_UsageApplication
User_Profile_DB
User_Sync_DB
User_Social_DB
However, when I checked the following article -
http://technet.microsoft.com/en-us/library/cc678868.aspx - I see that Simple Recovery Mode is the default configuration for these databases. So, finally, here is my question - will it be detrimental to these databases to set them to the Full Recovery
Mode?
Thanks!
Tom
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint GypsyThis really depends on your recovery objectives. The main reason for taking log backups, aside from truncating the log, is to be able to recover to a specific point-in-time. This is very helpful in mission-critical, highly transactional systems. I have not
seen a SharePoint environment require a point-in-time restore of the content or application service database. So for this case, you can overwrite the LDF bakups. Just make sure that you can recover your databases appropriately and meet your recovery objectives
on the farm level.
As far as the log file growth is concerned, you are correct. If you cap the size of your LDF file to let's say 10 GB, regular log backups will truncate the log, thereby, having space for additional transaction log records. The only risk here is when your
log backups are not frequent enough that the LDF file fills up before the next log backup runs to truncate the log. You run the risk of your database behaving as read-only and that will affect the site collections/applications using those databases
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course -
Install BI Tools with paid VS2008 Pro in workstation and paid Sql Server 2008 R2 in server?
My workstation has VS2008 Pro (paid) and Sql Express (free); our Windows Enterprise server has SQL Server 2008 R2 RTM (paid).
In other words, my workstation may not have a paid version of the sql server DB, but our server does. Is there a possibility that I can install the BI development tools in my workstation?
Thanks.
VMHi VM,
As you can see on the link below
http://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).aspx#Dev_tools
The Business Intelligence Development Studio is not available on SQL Server 2008 Express Edition. So if you want to the BIDS tool is available on your workstation, then you need to change the edition from Express to other edition.
Besides, you can install SQL Server Data Tools - Business Intelligence for Visual Studio 2012 on your workstation, in this case, the BI development tools is available on your workstation. The SQL Server Data Tools - Business Intelligence for Visual Studio
2012 is available on the link below.
http://www.microsoft.com/en-in/download/details.aspx?id=36843
Regards,
Charlie Liao
TechNet Community Support -
I dropped my iPhone 4 while using it. When I picked it up, it would not turn on. I have tried charging it. I don't have the money to get it fixed right now. What am I supposed to do??
You can try resetting it to see if that turns it on, but if it does not work, the iPhone is probably damaged from the fall and you should take it to an Apple Store so that they can have a look and determine if it is repairable. An out of warranty replacement will cost you money but much less than if you had to buy a new phone.
Maybe you are looking for
-
Help with dreamweaver extension buid
I have written a very useful extension for dreamweaver that works perfectly. But now I want it to insert the code ABOVE the html rather then being forced to insert it somewhere between the body tags. what needs to happen to make that change? I tried
-
Rendering video issue, NEED HELP BAD
I downloaded after effects CS4 and my composition settings is 600x400, square pixels, 29.97fps. I rendered the video with these settings: Photo JPEG Million Colors 29.97 FPS BEST quality well the rendered video keeps on skipping as soon as it hits th
-
Dashboard Prompt to filter multiple Subject Areas (in a Combined Analysis)
I have a Combined Analysis where I am combining multiple Subject Areas. I want to add this report to a dashboard to use a dashboard prompt to filter by the Year. The problem I have is because the 'Year' value in each subject area has a different Colu
-
BC4J Logging on deployed OC4J instance
Whilst developing, we've been using detailed logging by specifying the following Java options in JDeveloper: -Djbo.logging.trace.threshold=9 -Djbo.logging.show.timing=true -Djbo.debugoutput=console -Djbo.jdbc.trace=true -Djbo.logging.show.function=tr
-
Create Favicon for URL Forwarding webpage
Hi, Do anyone know how to Create Favicon for URL Forwarding webpage? I have try out several method to make it done,but failed...might need helps here! Thanks!