SharePoint 2013 on-premises integration with third party email account

the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech Learner

Hi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Similar Messages

Groupware Integration with Third party Email and calendar server

Hi All,
We are trying to integrate email, calender and other standard collaboration features with EP7.0.
As per the standard provided by SAP, only Lotus Notes and Exchange transports are provided by SAP.
I would appreciate if some one can guide on how to go about integration this collaboration features with thrid party email and calendar servers other than MS Exchange and Lotus notes.
I have this link but it does not provide information in more detail.
https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/coll/How%20To%20Build%20a%20Groupware%20Connector.html
Appreciate your help
Regards
PN

Dear All.
Appreciate if any one can provide pointers in the right direction.
Thanks
PN

SharePoint 2013 on-premises integration with goDaddy Email account

Hi Everyone ,
We wish to integrate our on premise SharePoint 2013 notifications and other related stuff with our Domain emails hosted on GoDaddy servers.
We are unable to find the related support content on internet.
We have integrated email via SMTP with our outlook already. So far my understanding is that we have to add SMTP settings in IIS Sharepoint Application and then adding these settings in Central admin settings.
Tech Learner

Hi,
Based on your description, my understanding is that you want to configure the outgoing email setting and incoming email setting in SharePoint 2013.
You can use the SMTP server for your outgoing email and incoming email settings in SharePoint 2013.
Please refer to the links below:
Configure outgoing email for a SharePoint 2013 farm:
http://technet.microsoft.com/en-us/library/cc263462(v=office.15).aspx
Configure incoming email for a SharePoint 2013 farm:
http://technet.microsoft.com/en-us/library/cc262947(v=office.15).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Sharepoint 2013 on-premise integration with MDM solution on Mobile

Hi,
Can sharepoint integrate with a MDM solution on the mobile based on device certificates?
Thanks
Naresh

Hi Naresh,
i would like to suggest you to open a thread also at MDM forum, perhaps there is a clue regarding the device certificate: http://social.technet.microsoft.com/Forums/en-US/home?forum=winphonemgmt&announcementId=048fe18a-0606-4079-a1ec-0fc5bd9a1f1d
for more info regarding the certificates you may check at this article:
http://technet.microsoft.com/en-us/library/bb633120.aspx
please correct me if i am wrong, as i know sharepoint may not have the integration to MDM using OOB feature.
if should the certificate able to set at mobile and system center perhaps sharepoint also able to accept it since it may also use SSL.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

EP integration with third party BI tools

Hi,
I was looking for information and pointers on EP integration with third party BI tools like Business Objects etc. Would be grateful.
Thanks,
Madhu

Thanks. We have a full fledged Business Objects reporting environment. My question is: As a beginner in the EP space, I would like to understand how to treat the Business Objects environment as one of the content providers for the Enterprise Portal? Are there any documents or manuals that talk about the integration of EP with Business Objects? I know the question is too broad, but any pointers would be useful.

Port 25/587 and third-party email account

Like many who have posted notes about the Port change and third-party email accounts, I have read everything related to these changes and still cannot figure out how to adjust my settings so that I can send email from my third-party email account. In June, I switched to Verizon DSL from a cable service, which was very slow. "Slow" is now looking a lot more appealing than not being able to send email through my third-party account.
I have a Verizon email account, which I use with friends and family. I have another account that I have had for over ten years. I used the latter account as my only account for many years and that is the email address on my business cards. I will continue to use the third-party account as my business account, so hopefully someone can walk me through the change process so I don't need to switch providers.
I use Outlook for all my email. What do I need to change so that I can continue to use Verizon to send all my emails?
My POP3 settings include User Information (my name as it appears to recipients and my email address), Logon Information (user name and password), and Server Information (Incoming mail server [POP3] and Outgoing mail server [SMTP]).
What should appear in each of these so I can send email from my third-party account? Let's say my third-party email address is [email protected] User information is then my name and my email address ([email protected]). Logon information is then what? My abc.net user name and password? My verizon.net user name and password? Some combination of these? How about the Server information? Is my POP3 relay.abc.net or incoming.verizon.net? (I think it's the former for incoming.) Is my SMTP relay.abc.net on Port 587? Is it outgoing.verizon.net on Port 25? Something else?
I know this is long, but I have really tried to follow all the instructions Verizon gives and I still cannot send email from my abc.net account.
Thanks.
Solved!
Go to Solution.

It really depends on whether your 3rd-party provider allows port 587 to be used. If they have a different alternate port you should be able to use that also. Verizon is *only* blocking port 25. Port 587 is just the default "other" SMTP port, so it's the alternate port for most providers, but not all. If you cannot get these settings to work, your other option is to set up Verizon for your outgoing server.
For the sake of example, we are going to pretend that we are setting up your fictional account. Using "[email protected]" as the 3rd party address and "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: relay.abc.net (or whatever your 3rd party server is) - For this server you set up everything according to your domain's settings.
Reply Address: [email protected]
Outgoing Server: outgoing.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): No
Port: 25 (although 587 also works.)
These settings should work unless you have a Verizon/Yahoo account, in which case the outgoing server name is: outgoing.yahoo.verizon.net
Hope this helps. If you still have questions, please let me know.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

SAP IDM 7.0 integration with third party system

Hi Experts,
I know SAP IDM 7.0 can integrate with third party systems and create user ids on most of the third party systems.
But I need to know regarding If it is possible to integrate with following systems
1) Microsoft Exchange 2007 ( I know till exchange 2003 SAP IDM support )
2) Microsoft Active directory 2008 ( I know till Actice directory 2003)
3) EMC Documentum 6.5
4) ARIS 7.1.0
5) BlackBoard, Release 9.0
6) Oracle 10g ( Is it possible to create users at oracle level ? or at what level ? )
7) Sun Solaris Sparc ( Is it possible to create users at OS level )
If you have information how on this please share. I know that provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?

Hi Matthew
Your expertise in SAP IDM is indeed a great help!!
>Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user in oracle database ?. As you said this should be possible. What about creating user( user management ) in oracle 10g application like dba or scot and assigning the privileges in oracle application?
>might need to do via UNIX scripts, but it can be done
You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ? Is it via the option "file " under the "Repositories" with repositories wizard and later executing the file from SAP IDM ?
Thank you once again for your expert answers on third party systems.

Integration with Third party Help Desk

Hello,
We need to integrate SAp solution Manager 3.2 with third party Help Desk software Like REMEDY ....
So that messages updated in Remedy are updated with Solution manager and vice versa.
Can we have some soltuion on that ?
Deepti

look here:
<a href="http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm">http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm</a>

Sync third party email accounts to iOS

Hello guys,
does anybody know how to sync third party email accouns to ios since itunes can't do it? Is there an app for this? I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
pserik

I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
That's the only way to do it.

R12 iStore integration with third party content management system

We are facing several challenges and are already a month behind for Go-Live with the iStore implementation. Hence, I wanted to check if anyone has worked on a similar setup
1. iStore being used only for cart functionality
2. All content, web pages are on a thrid party site
3. iStore's deep linking is being used for cart updates
4. We have a dmz environment and reverse proxy setup
5. Payments is integrated
We are finding several application errors, there is a loss during the back & forth communication between iStore & third party site. Could somebody please advise if there can be a better setup or if they have implemented a similar network topology.
Thanks.

Hi All,
We are also facing same issues(Application Errors) and our setups include third party website linking, DMZ configurations and Reverse Proxy setups. Unable to know the root cause for these application errors as it was intermittent.
Please help me on this.
Regards

ChaRM integration with third party tool

Hello,
I have some talks withn customers regarding a scenario where Change Requests comes from a third party tool like HP Demand and Portfolio Management. A possible scenario is when there is a request for change which goes for a complex review and process approval before going directly into the ChaRM creation, without going into a service desk ticket.
I imagine a kind of web service similar to that of the Service Desk but in this case to work with the SDCR or SDHF tickets, so that external systems can interchange data with those Charm tickets. Does anybody face such type of integration?? What other alternative path you follow for this requests which do not come form a incident/problem workflow?
I appreciate your comments.
Regards
Esteban

look here:
<a href="http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm">http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm</a>

EBP 5.0 integration with Third Party

Hi
We need to integrate EBP with a third part J2EE web based application
INtegration touch point
while creating free text requiistion(indirect material) user need to call the third party application, the thirdparty application will return an aditional value(based on the parameter passed by EBP) which needs to be passed back to the backend system
Can anyone suggest an approach(BADI, BAPI extensions?) as how one should go ahead with INtegration
Thanks in advance
Sachin

Hi Vadim
Thanks a lot ,
here is the functional need
1. while creating a shopping cart in EBP , a user can either search an item from a catalogue
2. if the item is not found user will enter a description for the Item
3. this description needs to be passed to third part J2EE application which will return an additional (Custom)field
4. SO i want to get that custom field returned by J2EE application and update it back to the respective PO which will be created
5. ALso i need to include an UI interface which will allow user to select the value which needs to be returned , so user will explicitly call this J2EE application
CAn i use the standard custom fields for updating the value returned(this will be a numeric value) by the J2EE application
PLease let me know if there are any doubts
looking forward to your answer
Thanks in advance
Sachin

Cisco ISE integration with third-party firewalls

Can Cisco ISE be integrated with a third-party firewall (such as Checkpoint), to provide authentication/authorization services to remote VPN user devices (based on device MAC address)?
The remote user would establish a VPN connection to a third-party firewall, based on a username/password authentication, but the user would only be allowed to send/receive traffic to the internal network if the MAC address of the device being used was authorized by Cisco ISE.
Thank you in advance.

Rui,
I do not think the vpn client sends the ip address in a called-station-id, that might be the public ip address that the client is initiating the request from. If you have an existing radius server or can run a packet capture you should be able to verify that.
If the client does send the mac address in the radius packet then you can create a custom condition that can be used to check the mac address along with the username to allow it access to the session. However in VPN deployments there is no concept of profiling since 802.1x deployments usually include the client's mac address.
Thanks,
Tarik Admani
*Please rate helpful posts*

SAP HR Integration with Third Party System

I want to create Integration between SAP HR and Third party System which will transfer data from SAP PA & OM module to Third Party sofware.
The Requirement is ...... there is one TMP table in Third System which needs to be update whene ever there is any creation,change or Deletion of the Employee details.
How can we do this.What would be the flow.If any one has creates code for this,than please help me with the same.
Thanks,
Viru

No Answer

SharePoint 2013 on-premises integration with third party email account

Similar Messages

Maybe you are looking for