Sharepoint 2013 site webdav path on office

Dear All
I had a problem when open a document word or excel on sharepoint 2013 site,
when open it and choice save as it will show the path on PC default location not a sharepoint site web path.
How can I fix it.
Regards
PK

Hi PK,
According to your description, my understanding is that when you opened a SharePoint document, and chose Save as, it didn't open the SharePoint path.
Why not use "Save" button to save the document to SharePoint site? I suggest you click "Save" instead of "Save as".
If this issue still exists, please uncheck “Enable Protected View for files located in potentially unsafe location” in the Trust Center of Office.
There are two posts, please check if they are useful for you:
http://blogs.interfacett.com/word-2010-not-saving-back-to-sharepoint-2010-by-default
http://isharepoint.wordpress.com/2011/05/26/can-not-save-document-back-into-document-library/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
I found a similar query from March 2014 found here
http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281
Has there been an update released to resolve this
Cheers D

Hi ,
According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Cannot sync Microsoft Sharepoint workspace 2010 with Sharepoint 2013 site

I keep getting the below error message when I try to sync a doc lib from a sharepoint 2013 site with sharepoint workspace 2010.
The field "AppAuthor" contains a lookup list "AppPrincipals" that cannot be resolved. The target list may not be part of the site
I have uninstalled Lync 2013, uninstalled and re-installed office 2010, 2687364 hotfix yet the issue still persists.
Any help will be greatly appreciated
Kind Regards
Louis
thanks

Hi,
Is this issue only occur in one client machine? Can other machines installed SharePoint Workspace 2010 works when perform syncing?
As you have reinstalled the 2687364 hotfix and the issue still exists, I suggest you install Office 2010 SP2 to see if it can work:
32-bit
http://www.microsoft.com/en-us/download/details.aspx?id=39667
64-bit
http://www.microsoft.com/en-us/download/details.aspx?id=39647
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

MySite NewsFeed is not showing the feeds from a SharePoint 2013 site which followed programmatically

Hi Experts,
I am facing an issue with following SharePoint 2013 site programmatically. When i was followed a site programmatically, unable to see the posts from followed site in MySite NewsFeed. But i can able to see the followed site in the list of sites i am following.
If i did the same manually by clicking on Follow link on right top of the site, i can able to see the posts from the followed site in MySite NewsFeed.
Here is my code. I am doing this activity in an event receiver, while adding an user to the site.
SPSocialFollowingManager manager = new SPSocialFollowingManager(profile);
SPSocialActorInfo actorInfo = new SPSocialActorInfo();
actorInfo.ContentUri = new Uri(properties.Web.Url);
actorInfo.AccountName = targetUser.LoginName;
actorInfo.ActorType = SPSocialActorType.Site;
manager.Follow(actorInfo);
Any help would be appreciated. Thanks in advance!
dinesh

Hi,
According to your description, my understanding is that you want to follow site programmatically in SharePoint 2013.
I suggest you debug the code step by step to check whether the variable is valid.
You can also create a simple console application to test whether it works.
Here is a code snippet for your reference:
SPServiceContext serverContext = SPServiceContext.GetContext(web.Site);
UserProfileManager profileManager = new UserProfileManager(serverContext);
string userString = user.LoginName.ToString();
UserProfile userProfile = profileManager.GetUserProfile(userString);
if (userProfile != null)
SPSocialFollowingManager manager = new
SPSocialFollowingManager(userProfile);
SPSocialActorInfo actorInfo = new SPSocialActorInfo();
actorInfo.ContentUri = new Uri(web.Url);
actorInfo.AccountName = user.LoginName;
actorInfo.ActorType = SPSocialActorType.Site;
manager.Follow(actorInfo);
More detailed information about follow site programmatically:
http://stackoverflow.com/questions/23271133/how-do-i-follow-site-in-sharepoint-2013-with-ssom
http://msdn.microsoft.com/en-us/library/office/jj163217(v=office.15).aspx
Best regards,
ZhengyuGuo
Zhengyu Guo
TechNet Community Support

SharePoint 2013 Site Mailboxes behind UAG

Hello,
I tried to connect to my SharePoint 2013 site mailbox through UAG. From internal access, it works fine.
From external access, I was connected to the SharePoint Site. I clicked on the Mailbox link I have a OWA form based authentication. After wrote my credential, I had an error page "404 - File or Directory not found". I clicked on back button an
reauthenticate myself, I received a message "Logon error. Access to the page was made from an unauthorized URL.
If you were confronted to a same error, how did you corrected this one ?
Thank you.
Philippe
philgood031

Hi Luo,
Thank you for your answer. Below replies to yours :
1. Yes we have activated the form based authentication on UAG. We used based authentication on Outlook Web Access. Connections to Webmail works fine.
2. We used external URL for Webmail, but for Office Web Apps reasons we have added another internal DNS zone with the same domain name than external domain. We have added Hosts Record.
3. On local network, we can have access to Site Mailbox in Outlook, I have never tested this from external network. I have added "send as" rights for the user on the shared mailbox and the full rights on the shared mailbox.
Summary :
Our client have installed SharePoint 2013, Office Web Apps 2013 and Exchange 2013 SP1. He wants to have an external access to Office documents and also to Site Mailboxes on SharePoint. Office Web Apps works fine inside and outside. Site Mailboxes works fine
Inside but not outside. They used a domain name like "internal.cotonso.com" and the external domain name is "contoso.com". They called us to resolved this problem. The only Warning informations we received from the Event Viewer with
sixteen different event id with number 67
The description for Event ID 67 from source Microsoft Forefront UAG cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the
local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2xx.yyy.zzz.156
charel
webmail2013
1
OWA2013
ExchangePub2013
/owa/[email protected]/plt1.ashx?cId=3292ea71-4116-4f59-8957-7e3444de3883&msg=SessionDataError&tg=&MDB=abe00dfc-d231-4a90-aede-4a9b67b68c2e&sdCoId=3292ea71-4116-4f59-8957-7e3444de3883_1397656540883&fe=null&be=null&cbe=null&cver=15.0.847.32&rand=1397656541490&rpo=0&off=0&pal=0&rfe=0&PLT=uES,4,uEE,4,fS,0,dLS,0,dLE,0,cS,0,cE,0,reqS,2,resS,2,resE,5,domL,12,pE,631,now,632&lbv=15.0.847.32&icv=15.0.847.32&iacr=15.0.847.32&lcver=15.0.847.32
Default rule
POST
Thank you.
Philippe.
philgood031

Upload 100 GB data into sharepoint 2013 site

Hi Team,
I want to upload 100GB data into sharepoint 2013 site for performance testing.
I have the 5 document libraries.
I want to upload the 10GB data to each document library in the site using powershell.
Is it possible or not? Can you explain the detailed steps

This should not be a problem, but you can't do it in 1 go as the default upload size per document = 50 MB (see
https://msdn.microsoft.com/en-us/library/ff487972.aspx). I've created a tool that uploads documents in chunks, maybe you can use that (read the article as you'll need to increase some settings):
https://gallery.technet.microsoft.com/office/The-Migration-Dragon-for-628acae0 Maybe that's an option for you too.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Page not found error while opening sharepoint 2013 site

page not found error while opening sharepoint 2013 site
Please help me on this

Hi,
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, please make sure the URL of the site is correct.
Please check whether you could access other pages in the problematic site.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

SharePoint 2013 site in 2010 mode - Web Analytics functionality?

We recently upgraded to SharePoint 2013 from SharePoint 2010. Our main portal site is running in 2010 mode. Are "Site Web Analytics reports" supported for 2013 sites running in 2010 mode? After our upgrade, it appears that no
new data is showing in these Web Analytics reports, although we can see historic data from before the upgrade.
I know about the changes in these analytics reports in 2013. Note that I can see the new popularity trends and usage reports in 2013 sites located in the same site collection, but they are NOT running in 2010 mode. My question is only about
2013 sites in 2010 mode and the ability to run web analytics reports of any kind to assess page popularity, document popularity, etc.
Any information would be helpful. Thank you!

Hi,
According to your description, my understanding is that you want to know if the Site Web Analytics reports is supported in SharePoint 2013 sites running in SharePoint 2010 mode.
The Site Web Analytics reports is supported by Web Analytics Service Application in SharePoint 2010, but Web Analytics is no longer service application in SharePoint 2013 and analyses and reporting process incorporated to search service application. So if
we view the Site Web Analytics reports in SharePoint 2013 sites running in SharePoint 2010 mode, we will not be able to get the results.
http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=250
I recommend to update the sites running in 2010 mode to SharePoint 2013, then you can get the web analytics reports from Popularity Trends and Most Popular Items.
http://technet.microsoft.com/en-us/library/jj715890.aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Adding a Left Navigation in the place of Current navigation in SharePoint 2013 Site.

Hi All,
I have successfully converted an HTML Page to a SharePoint 2013 Master Page. I also created a Custom Page Layout. Using both them I have created my SharePoint Site with 30+ pages. Each page is consisted with the Top Header Navigation as it is inheriting
from the Master Page I have used. Now I need the left navigation inherit from the master page also. It gives me the advantage of updating it from the master page and affects it through the entire SharePoint Site.
But at the moment I am inserting the Left Nav using a web part as an HTMl code snippet individually for each and every page. If needs a modification I have to go through all the pages and do the modification. This is not convenient also. I want to this left
nav like the SharePoint Current Navigation alternative but within my Page Layout.
Is there an option to chat within these forums?
Could someone help me to solve this problem?
Thanks and regards,
Chiranthaka

Hi Chiranthaka,
Thank you for posting in MSDN forum.
Since
this forum is to discuss: Visual
Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based on your issue,
it is more related to the sharepoint, so I’m afraid that
it is not the correct forum for this issue.
In addition, I find that you have been posted this issue in this SharePoint forum:
https://social.msdn.microsoft.com/Forums/en-US/7e3af32b-2bf8-41f5-9420-9265ed64458c/adding-a-left-navigation-in-the-place-of-current-navigation-in-sharepoint-2013-site?forum=sharepointgeneral ,
so we will merge this case to the above case, I think that the SharePoint expert will follow up your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
Thanks & Regards, Krishna

Hi Krishna,
For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<HideCustomAction
GroupId="Customization"
HideActionId = "ProjectSettings"
Location = "Microsoft.SharePoint.SiteSettings">
</HideCustomAction>
</Elements>
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

How do you migrating a SharePoint 2010 BI PerformancePoint site to a newly built SharePoint 2013 site?

Hi All,
I need help in migrating a SharePoint 2010 BI PerformancePoint site to a newly built SharePoint 2013 site on another server. The SharePoint 2010 BI Performance Point site has mainly Analytic graphs and charts that work perfectly within the SP 2010 environment
but do not work within the SP 2013 environment. When I open the graphs and charts within Dashboard Designer I get a ‘cannot access the data source’ error message. The problem I am having is there is no way I can edit the graphs and charts to use a newly created
data source on the SP 2013 site.
I hope you can help
Colin

Just been going through all this with a client.
Make sure that you either migrate the Secure Store using the Database Attach method (You'll need the farm passphrase to do this), or ensure that you recreate any Secure Store groups required for users to access the data sources.
If you're not using the Secure Store for access to the data, try monitoring the SQL logs on the target data stores and looking for login failures. The PerformancePoint service account(Or the excel unattended account) may required access to the
data store.
Also, if you're using PowerPivot, be aware that your Excel files will need to be created in Excel 2013 with the PowerPivot 2013 add-in in order for manual refresh (Or refresh on open) to work.
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

SharePoint 2013 site coll's created. Home page not displaying for any site collection in farm

SharePoint 2013 site coll's created. Home page not displaying. Same issue for all site coll's in the farm. Done the basic checks. Any Ideas?

Hi lakshita,
Would you please check whether you can go to the page:
http://siteurl/_layouts/settings.aspx page:
http://siteurl/default.aspx page? If so, go to Site Features in site settings page, reactivate the Wiki Page home page feature, check the result.
If not, please check whether there is related information in ULS log and event viewer log file? Does the page shows page not found or other errors? Check whether the site can be opened in other machine?
Thanks,
Qiao Wei
TechNet Community Support

How to Enable Anonymous access to a SharePoint 2013 site e.g for specific site,list etc..

Hi All,
I'm working on an extranet and i would like users to be able to fill a form on the site.
Since i'm going to use sharepoint 2013 how can i configure sharepoint to use both anonymous access and windows authentication at the same time.
I know for sure it can be done but what can be allowed for anonymous access e.g specific list site etc..
I would need to make some area available as anonymous e.g a whole site as i would like to brand it a little to host the form.Any tips of who has configured similar would be appreciated

Hi Patrick,
Thanks for posting your query, Kindly follow the below mentioned steps to enable Anonymous access to a SharePoint 2013 site.
In Central Administration, under Application Management., click Manage web applications.
Select the web application you want to enable anonymous access for.
In the Security group on the ribbon, click Authentication Providers.
In the Authentication Providers dialog box, under Zone, click Default.
On the Edit Authentication page, select the Enable anonymous access check box.
Click Save.
Close the Authentication Providers dialog box.
Also, browse the below mentioned URLs for more details
http://blog.cloudshare.com/2012/10/15/how-to-enable-anonymous-access-to-a-sharepoint-2013-site/
http://www.sharepoint-journey.com/how-to-enable-anonymous-access-in-sharepoint-2013.html
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Out-of-date Silverlight blocking in sharepoint 2013 sites in IE

Out-of-date Silverlight blocking in sharepoint 2013 sites in IE
http://blogs.msdn.com/b/ie/archive/2014/10/14/october-2014-updates-and-a-preview-of-changes-to-out-of-date-activex-control-blocking.aspx
How to fix this in a code. We can not change client's IE policies to update this. Do they need to use chrome?
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi,
I’m afraid we could not fix this in the SharePoint perspective, as it is a update for IE.
When allowSilverlightPrompt method is set to false,
users will not be prompted to load Silverlight if it isn’t already installed.
It is not for disable the Silverlight for the users who have installed the Silverlight.
http://www.dontpapanic.com/blog/?p=116
If your company policy could not update the IE, instead of using IE, I recommend you can use the Chrome or Firefox browser.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Configure a sharepoint 2013 site for external and internal access

I need to configure a local install of sharepoint 2013 so that users can access it internally and externally using windows/AD authentication. The internal and external addresses are different.
I have bound an external ip to the domain for external access.
I have created Alternate Access mapping, and bound the host header but I get a file not found message for external access.
Have I missed something here? why the error and how can it be fixed. Step by step process would be appreciated.

Hi Luis,
According to your description, my understanding is that the error occurred when accessing the site externally.
The most common cause for this is that the IIS host header is configured incorrectly. The 404 will appear because we are hitting a different IIS web site and not the one we are intended to.
Here is a similar issue for you to take a look:
http://stackoverflow.com/questions/14953322/sharepoint-2013-404-not-found-while-accessing-site-collection-from-outside
More references:
http://technet.microsoft.com/en-us/library/cc261814(v=office.15).aspx
http://technet.microsoft.com/en-us/library/cc263208(v=office.15).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Sharepoint 2013 site webdav path on office

Similar Messages

Maybe you are looking for