SharePoint 2013 with sp1 install on windows server 2012 R2

Hi All:
excuse me I have a question about sharepoint installation. I install sharepoint 2013 with sp1 on windows server 2012 R2，but i always got "Configuring Application Server Role, Web Server (IIS) Role"
message. I refer to this article <http://support.microsoft.com/kb/2765260>. I still got this message ... Which I did wrong step ?? I have been troubled for a long time, thanks to the help ...

Hi TiM,
According to your description, my understanding is that you got an error when you installed the prerequisites for SharePoint 2013 SP1 on Windows 2012 R2.
Please make sure that you have installed .NET Framework 3.5 on Windows Server 2012 R2, and enable .NET Framework 3.5 by using the Add Roles and Features Wizard.
Here is a blog you can refer to:
http://blog.migrationking.com/2013/11/how-to-install-net-framework-35-on.html
Reference:http://social.technet.microsoft.com/Forums/en-US/55589deb-cddf-445f-be41-b4c97f06ff4d/sharepoint-2013-sp1-on-windows-2012-r2?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Similar Messages

Prepare sharepoint 2010 with sp2 environment on windows server 2012 R2

HOw prepare sharepoint 2010 with sp2 environment how i install sharepoint 2010 with sp2 in a windows server 2012
i mean
from scratch i just prepared a windows server 2012 R2 vm
and i set all required roels (Appserver,webserver etc) according to this link
http://social.technet.microsoft.com/wiki/contents/articles/12502.how-to-install-and-configure-windows-server-2012-for-sharepoint-2010.aspx
and i have sharepoint 2010 set up, and i downloaded sharepoint 2010 sp2
from this link
http://www.microsoft.com/en-us/download/details.aspx?id=39672
now should i install sp2 and install sharepoint 2010 binaries?
adil

SharePoint 2010 has no supportability statement for Server 2012 R2. I would not use it until Microsoft releases a supportability statement.
Even it has no supportability for server 2012, but sharepoint 2010 running fine in my server 2012 test environment
adil
You indicated you were using 2012 R2. SharePoint 2010 supports Server 2012 (non-R2) with SP2 media, but has no supportability statement for Server 2012 R2.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Exchange Server 2013 SP1 Install on Windows Server 2012 R2

I am trying to install Exchange 2013 SP1 onto a Windows Server 2012 R2. I get an error message that the operating system is not supported. I have installed all the prerequisite.

Does that mean that you can't install Exchange 2013 Sp1 with a Remote Desktop Role together included with Server 2012 R2?
Or is it possible to restore the Remote Desktop Role afterwards?
You can't install any build of Exchange 2013 on any server that has the RDS Role installed. So in other words, this is not a "limitation" with Exchange 2013 SP1 and Windows Server 2012 R2.
Additional Reading, check out: Exchange OWA/Activesync conflicting with RD Gateway
role
Martina Miskovic

Cannot install SharePoint 2013 with SP1 on server 2012 R2. IIS configuration error

Hey Guys,
I'm experiencing a problem which seems to be common considering the number of posts I've found about it, but none of the provided solutions worked for me.
I'm simply trying to install SharePoint 2013 with SP1 on a Windows Server Standard 2012 R2.
I've downloaded from the MS Volume Licensing website the "SharePoint Server 2013 with SP1" ISO file : SW_DVD5_SharePoint_Server_2013w_SP1_64Bit_English_MLF_X19-36118. So
this is the slipstreamed version which is supposed to bring compatibility with 2012 R2.
As I do not have direct access to the Internet I need to perform an offline installation. I also downloaded all prerequisities. When I run prerequisiteinstaller.exe with the necessary arguments, I get the following :
(Full log file is below)
I've tried the following :
- Restarted the server multiple times
- Manually removing/adding IIS role + restart
- Running the prerequisiteinstaller.exe from the DVD or from an extracted version
- Manually installing the prerequisities
- Installed .Net 3.5 as recommended here (http://social.technet.microsoft.com/Forums/office/en-US/0b597d35-b02d-4236-894d-38efc0c7c6f6/sharepoint-2013-with-sp1-install-on-windows-server-2012-r2?forum=sharepointgeneral)
None of the worked. So I'm stuck and I must completed the installation of this before the end of the week for an important project !
Your help would be greatly appreciated.
this is the complete log file :
2014-09-09 14:30:26 - Processor architecture is (9)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Common Startup
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-09-09 14:30:26 - Trying to remove the startup task if there is any.
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-09-09 14:30:26 - Successfully deleted the startup task
2014-09-09 14:30:26 - Analyzing the following command line argument:
2014-09-09 14:30:26 - /continue
2014-09-09 14:30:26 - Continuing after restart
2014-09-09 14:30:26 - Details of the current operating system:
2014-09-09 14:30:26 - Major version number of the operating system: (6)
2014-09-09 14:30:26 - Minor version number of the operating system: (2)
2014-09-09 14:30:26 - Build number of the operating system: (0X23F0=9200)
2014-09-09 14:30:26 - Major version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Minor version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Platform ID of the operating system: (2)
2014-09-09 14:30:26 - Product suites available on the operating system: (0X110=272)
2014-09-09 14:30:26 - Product type of the operating system: VER_NT_SERVER
2014-09-09 14:30:26 - Product type: (0)
2014-09-09 14:30:26 - OS type: (2)
2014-09-09 14:30:26 - Configuring the application's property sheet...
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Management Framework 3.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - PowerShellVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft .NET Framework 4.5
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - Install
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is (1)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.5.51641
2014-09-09 14:30:26 - A post release .NET 4.5 is installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 6.1.7600.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:26 - Reading version of the following file...
2014-09-09 14:30:26 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:26 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 10.51.2500.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Server AppFabric
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - ProductVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Information Protection and Control Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.0.51212.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.6.61587.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - IsInstalled
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:30:26 - Beginning download/installation
2014-09-09 14:30:26 - Created thread for installer
2014-09-09 14:30:26 - "C:\Windows\system32\dism.exe" /online /enable-feature /featurename:NetFX3 /All /norestart
2014-09-09 14:30:27 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:33 - Install process returned (0)
2014-09-09 14:30:33 - [In HRESULT format] (0)
2014-09-09 14:30:33 - "C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe" -ExecutionPolicy Bypass "C:\Users\DADM_T~1\AppData\Local\Temp\PreFB24.tmp.PS1"
2014-09-09 14:30:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:47 - Install process returned (0)
2014-09-09 14:30:47 - [In HRESULT format] (0)
2014-09-09 14:30:47 - "C:\Windows\system32\dism.exe" /online /enable-feature /all /featurename:IIS-ASPNET45 /norestart
2014-09-09 14:30:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:49 - Install process returned (0)
2014-09-09 14:30:49 - [In HRESULT format] (0)
2014-09-09 14:30:49 - "C:\Windows\system32\iisreset.exe" /noforce
2014-09-09 14:30:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Install process returned (0X426=1062)
2014-09-09 14:30:57 - [In HRESULT format] (0X80070426=-2147023834)
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Flags
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PendingFileRenameOperations
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-09-09 14:30:57 - Reading the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-09-09 14:30:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
2014-09-09 14:30:57 - Cannot retry
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Management Framework 3.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PowerShellVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft .NET Framework 4.5
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Install
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is (1)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.5.51641
2014-09-09 14:30:57 - A post release .NET 4.5 is installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 6.1.7600.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:57 - Reading version of the following file...
2014-09-09 14:30:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:57 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 10.51.2500.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Server AppFabric
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - ProductVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Information Protection and Control Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.0.51212.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.6.61587.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - IsInstalled
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:32:19 - Opening log file
2014-09-09 14:32:19 - Opened action for user
2014-09-09 14:32:19 - C:\Users\DADM_T~1\AppData\Local\Temp\prerequisiteinstaller.2014.09.09-14.30.26.log

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

SharePoint server 2013 Search Service App on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM
was set up to access the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate
to search service app admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is
in a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem
with Search Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.
Thanks a lot.

Hi,
According to your post, my understanding is that SharePoint server 2013 Search Service App did not work on Windows server 2012 R2.
Please make sure you configure Search Service Application correctly. You can refer to:Create and configure a Search service application in SharePoint Server 2013
I recommend to created new Search Service Application, and made a full crawl. Then assigned the new SSA as the default SSA for webapplications. Finnlay checked the issue doesnt occur now,
If all search related components now are online, to keep the enviroonment clean, you can delete the old SSA.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

SQL Server 2012 Express SP1 will not install on Windows Server 2012 Essentials R2

I have been attempting to install SQL Server 2012 with SP1 Express Edition for about a two weeks and have been unsuccessful. My organization recently purchased a new Dell PowerEdge T320 Server (64 Bit) with Intel Xeon Proc.-E5-2420; 2.2Ghz, 32 Gb RAM,
1 Tb RAID 5 H/D, and Windows Server 2012 R2 Essentials (preinstalled). The server will be configured as an on premises server. We are running a small church management application that requires SQL Server 2012 SP1 Express. Per the direction
of our application vendor, we downloaded the SQL Server 2012 SP1 Express file (SQLEXPRADV_x64_ENU.exe) from the Microsoft SQL Server Website. We ran the file "As Administrator" and the SQL Server 2012 Setup program began.
We selected New SQL Server Stand-Alone Installation, successfully installed the needed Product Updates, and accepted the MS SQL Server 2013 Express License terms.
When the Feature Selection Page appeared we checked only the "Data Base Eng Services". The
Instance Configuration Page was displayed and we inserted a "Named Instance= Shelby",then pressed next. On the
Server Configuration Page the only change was setting the "sql server browser = automatic". The Database Engine Configuration Page appeared
and we inserted the following settings:1] Server Configuration Tab; a) mixed mode, b)inserted SQL Server Admin pswd, c) added current user as administrator: 2] Data Directories Tab; default/no changes: 3] User Instanced Tab; default/no
changes: and 4] Filestream Tab; default/no changes. Next the
Reporting Services Configuration Page came up and the reporting services native mode was set to
"install and configure". The Error Reporting Page appeared and was left as the
"default". The SQL Server 2012 Setup program proceeded to Installation Progress Page and started to install. Just before the install program ended it displayed a message saying that there
were errors and the Database Eng Services did not succeed. I uninstalled SQL Server 2012 SP1 Express three (3) times, ran Windows Update after every uninstall, attempted to install the Database Engine and got the same results. Are there any patches or
special procedures for correctly installing SQL Server 2012 SP1 Express on my hardware configuration or Windows Server 2012 Essentials R2? Any insight would be greatly appreciated.

Can you post the setup Summary and detail logs, which will help to figure out the problem? The details about the location can be found at https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Satish Kartan www.sqlfood.com

Install SQL Server 2012 SP1 on a Windows Server 2012 R2 Failover Cluster - hangs at "Running discovery on remote machine" on VMWare VSphere 5.5 Update 1

Hi,I'm trying to install SQL Server 2012 SP1 on the first node of a Windows Server 2012 R2 failover cluster.The install hangs whilst displaying the "Please wait while Microsoft SQL Server 2012 Servce
Pack 1 Setup processes the current operation." message.The detail.txt log file shows as follows:(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached PID (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider
: NormalizePid is normalizing input pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached
PID (01) 2014-07-17 15:36:35 Slp: Completed Action: FinalCalculateSettings, returned True (01) 2014-07-17 15:36:35 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True (01) 2014-07-17 15:36:35 Slp: ---------------------------------------------------------------------- (01) 2014-07-17 15:36:35 Slp: Running Action: RunRemoteDiscoveryAction (01) 2014-07-17 15:36:36 Slp: Running discovery on local machine (01) 2014-07-17 15:36:36 Slp: Discovery on local machine is complete (01) 2014-07-17
15:36:36 Slp: Running discovery on remote machine: XXX-XXX-01After about 4 hours and 10 minutes, the step seems to time out and move on, however it doesn't seem to have discovered what it needs to and the setup subsuently fails

Hi,
Sorry Information you provided did not helped can you post content of both summary file and details,txt file on shared location for analysis.
Can you download Service pack again and try once more
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

VC Redist 2013 cannot be installed on Windows Server 2008 Core

Both vcredist_x86.exe and vcredist_x64.exe have this problem. And it can be reproduced 100%.
But all of them can be installed on Windows Server 2008 R2 Core, Windows Server 2012 Core, and Windows Server 2012 R2 Core.
From the log, it seems the installer depends some UI DLLs that are not included in this OS.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x8007000e: Failed to load theme controls.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x80004005: Failed to create main window.
Is it a bug or by design?
The following is the failed log:
[060C:0608][2015-04-15T02:18:41]i001: Burn v3.7.2829.0, Windows v6.0 (Build 6002: Service Pack 2), path: c:\vcredist_x86.exe, cmdline: '-burn.unelevated BurnPipe.{51C9AFD1-AA72-4BA2-8B12-E93691AFD7E3} {1B953492-AB47-43FA-A2BF-E1505C76194D} 3908'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\ADMINI~1\AppData\Local\Temp\dd_vcredist_x86_20150415021841.log'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleOriginalSource' to value 'c:\vcredist_x86.exe'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleName' to value 'Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.30501'
[060C:0618][2015-04-15T02:18:41]e000: Error 0x8007000e: Failed to load theme controls.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x80004005: Failed to create main window.
[060C:0608][2015-04-15T02:18:41]i500: Shutting down, exit code: 0x4005
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleAction = 5
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleElevated = 1
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleInstalled = 0
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleLog = C:\Users\ADMINI~1\AppData\Local\Temp\dd_vcredist_x86_20150415021841.log
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleManufacturer = Microsoft Corporation
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleName = Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.30501
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleOriginalSource = c:\vcredist_x86.exe
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleProviderKey = {f65db027-aff3-4070-886a-0d87064aabb1}
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleTag =
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleVersion = 12.0.30501.0
[060C:0608][2015-04-15T02:18:41]i007: Exit code: 0x4005, restarting: No
Xiaojin

Hi Xiaojin,
Thanks for posting in MSDN.
I don't think this is a bug. From your description, you want to install VC redist on some servers core for Windows Server 2008, 2012. Based on my knowledge, server core has no graphical user interface (GUI), there is no desktop. Only code written using Windows
application programming interfaces (APIs) can run on Server Core.
More information about server core please refer to here:
What Is Server Core?
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SCCM 2012 SP1 SUP on Windows Server 2012

Hi sccm guys,
I'm having Troubles to get the SUP role working on my Windows Server 2012. I'm using SCCM 2012 SP1. I installed (and did not configure) the WSUS role from the Server Manager. I Chose to install the DB on the local SQL instance (no WID instance).
Then I added the SUP role to the Server and configured it with the seperate wsus Administration site (Ports 8530 and 8531).
WSUS gets configured partially (Proxy Settings and "Products and Classification" Options only for Office and Windows)
The folowing error pops up in the wcm.log
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
Any clues?
Cheers
Sebastian Bammer

Also did not fix my issue. A round of my logs:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.2.9200.16384
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.2.9200.16384
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Verify Upstream Server settings on the Active WSUS Server
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:14 a.m.
3556 (0x0DE4)
Successfully refreshed categories from WSUS server
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:16 a.m.
3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Category Product:587f7961-187a-4419-8972-318be1c318af (Microsoft Dynamics CRM 2011 SHS) not found on WSUS
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Starting WSUS category sync from upstream...
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
3556 (0x0DE4)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:29:26 a.m. 3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:41 a.m.
3556 (0x0DE4)
Successfully refreshed categories from WSUS server
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Using DOMAIN\Administrator credentials for network connections
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Category Product:587f7961-187a-4419-8972-318be1c318af (Microsoft Dynamics CRM 2011 SHS) not found on WSUS
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Subscription contains categories unknown to WSUS.
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Done using DOMAIN\Administrator credentials
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
3556 (0x0DE4)
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=SCCM01.domain SITE=AKL PID=1544 TID=3556 GMTDATE=Mon Jan 14 19:29:42.723 2013 ISTR0="SCCM01.domain" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:29:42 a.m. 3556 (0x0DE4)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER
15/01/2013 8:29:42 a.m. 3556 (0x0DE4)
Thanks Christoph

FEP 2010 install on Windows server 2012 R2

I am trying to install FEP 2010 client on Windows server 2012 R2 from 2007 Server ( SP2 R3)
FEP deployment package fails to install. Error in execmgr is
Program exit code -2147156220.
Is there a way of installing FEP 2010 client on Windows Server 2012 R2 from SCCM 2007 ?
Thanks

Hi,
Are you running FEP 2010 update rollup 1?
https://blogs.technet.com/b/configmgrteam/archive/2013/09/16/support-questions-about-win-8.1-and-winsvr-2012-r2-for-configmgr-and-endpoint-protection.aspx
And the latest version of the FEpinstall.exe which is updated with this hotfix
http://support.microsoft.com/kb/2907566/en-us
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

[Forum FAQ]How to upgrade Windows Server 2008 R2 with a GUI to Windows Server 2012 Server Core

We found that some customers willing to upgrade Windows Server 2008 R2 GUI to Windows Server 2012 Server Core recently. This article provides detailed steps to perform the upgrade.
Analysis
Upgrading from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 with Server Core directly
is not supported. If you do that, you will receive the error message below(Figure 1) in Compatibility report:
Figure 1.
In these scenario, you can upgrade to Windows Server 2012 firstly. After the upgrade process is completed, you can switch freely between Server Core and Server with a GUI modes.
Produces
You can follow the steps below to perform an upgrade from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 Server Core mode:
1. Upgrade to Windows Server 2012 with a GUI mode
1) Firstly, please boot into Windows Server 2008 R2 with a Windows Server 2012 installation DVD inserted.
2) Select the operating system you want to install with a GUI mode.
We can see 2 options (Server Core Installation or Server with a GUI) for each operating system version. (Figure 2)
Figure 2.
Note: Please make sure you have enough disk space on system partition. Or you will get such an error in Compatibility report.(Figure 3)
Figure 3.
After the Compatibility check, the installation will continue. It will take several minutes until upgrading is done.(Figure 4)
Figure 4.
2. Switch the GUI mode to Server Core
Method 1: Using Server Manager
1) Open Server Manager, click
Manger and select “Remove Roles and Features” to start the
Remove Roles and Features Wizard.
2) In Features,
uncheck the box next to the “User Interfaces and Infrastructure” option, and then click “Next”. (Figure 5)
Figure 5.
Now tick the “Restart the destination Server automatically if required” box, then click “Remove”. (Figure 6)
Figure 6.
Method 2: Using Windows PowerShell
There are multiple ways to remove the GUI via Windows PowerShell, we introduce the way of using the ServerManager module.
You can also run the commands in Windows PowerShell with an administrator to remove the GUI feature:
“Import-Module ServerManager”
“Uninstall-Windowsfeature Server-Gui-Shell –Restart”
or
“Uninstall-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra –Restart”
It will take a period of time to remove the GUI feature and reboot. When the system boots up, you will get into the Windows Server 2012 with Server Core mode. (Figure 7)
Figure 7.
More information:
Switch between Full and Server Core in Windows Server 2012 using PowerShell 3.0
http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx
Windows Server Installation and Upgrade
http://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
More information:
Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=7887
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error With Crystal Reports On Windows Server 2012

Hello,
I have a VB.NET exe application created in Visual Studio 2010 that prints a crystal report directly to the printer. On Windows Server 2008 it worked fine but it does not work on Windows Server 2012. The report was originally created in Crystal Reports 2011. I have read elsewhere that in order to run a Crystal Report on WS 2012 that it needs to be created using Crystal Reports for Visual Studio. So I installed the developer version of Crystal Reports for Visual Studio (v. 13.0.8.1216). I opened the report in Visual Studio and saved it. I then installed the CRRuntime_64bit_13_0_8.msi on the WS 2012. My vb.net exe has the CrystalDecisions assemblies shown below. When I try to run the exe I get the error below. Does anyone have any idea as to what I am doing wrong? Thank you for your input.
Unhandled Exception: System.TypeInitializationException: The type initializer for 'PrintWorkOrderAndDrawing.PrintWorkOrderAndDrawing' threw an exception. ---> System.TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.En
gine.ReportDocument' threw an exception. ---> CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient,
or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://
www.businessobjects.com/support for more information.
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.CheckForCrystalReportsRuntime()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor()
   --- End of inner exception stack trace ---
   at CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor()

Hi Thomas
First the info re.;
I have read elsewhere that in order to run a Crystal Report on WS 2012 that it needs to be created using Crystal Reports for Visual Studio.
is incorrect. CRVS will run all reports down to CR 9 without issues. And even reports created in older versions will, for the most part, work just fine.
The error is rather strange as it normally indicates that an incorrect runtime has been installed. However in your case as you are using CR 13.0.8.1216 and the 64bit_13_0_8.msi that does not look to be the case. I would like you to double check the CR references in the project. Say, crystaldecisions.crystalreports.engine. It should be version 13.0.2000.0.
If that is confirmed, then we may be at the permissions mentioned in the error. And I'd use Process Monitor for that. Filter ProcMon for the app exe and run the app. Look at the logs for "Access denied" messages. In the log, look for CrystalDecisions.CrystalReports.Engine, see what the exe is doing with it. Where is it trying to load it from? Etc., etc.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

SharePoint Foundation 2010 SP2 running on Windows Server 2012 R2

Hello
I have upgraded a standalone Windows Server 2008 R2 running SharePoint Foundation 2010 SP2 to Windows Server 2012 R2. The upgrade completed OK and SharePoint Foundation 2010 SP2 is running OK as before upgrade.
Is anyone aware of any issues running SPF 2010 SP2 on WS2012 R2?

Hi
no issues using SP2
For more details check this official doc
http://support.microsoft.com/kb/2724471
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

SharePoint 2013 with sp1 install on windows server 2012 R2

Similar Messages

Maybe you are looking for