SharePoint 2013 Workflow Custom Task Form

Hi..I am working on SharePoint 2013 workflow using visual studio 2013. In this workflow, i am creating tasks and i want to make a custom task form.
My workflow contains serial tasks. When each user approve, he should specify the next user.
I have added a custom content type and assigned it to my tasks but all i can do is taking the outcome from the task form as integers.
I want the user to approve and choose another user so i can assign another task to him.
thanks..

I believe what you're looking for is the Collect Data from User function, however I don't see that anywhere in a 2013 workflow. This did exist in 2010 workflows.
What you can do is to change this to an InfoPath form and run the workflow that way, assuming there isn't anything you absolutely need Visual Studio for.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Similar Messages

Sharepoint 2010 Designer workflow Custom Task Form

Hello,
could you please help me to customize the WF Task form using SharePoint Designer?
My requirement is to create the SPD 2010 WF with custom task form where i can add the controls as per the form requirement and I need to add Attachment control too to upload the file on Task Form.
Could you please advise me that how can I achieve it using SPD only (Without Infopath form)?
(Through Infopath its pretty easy to customize the Task Form, but I need to customize it through SPD only)
Thank You In advance!
Regards,
Santosh

Hi Santosh,
For your demand, you can change the workflow task form to aspx pages and than customize the page .You can edit the content type created by the workflow to use the aspx pages :
Publish the workflow and it will have the task form created .The form name will be like Approval_x0028_25_x0029_.xsn .
The content type created by the workflow will also have the name Approval_x0028_25_x0029_.
Open the Tasks list in SharePoint Designer .Find the content type Approval_x0028_25_x0029_and edit it .
In the Forms section ,you can change the display form and edit form to be aspx pages for the content type .The workflow task will use the aspx page .I used the default task forms in my test and the URL is like:/Lists/Tasks/EditForm.aspx.
Save the changes .
Reference:
https://social.msdn.microsoft.com/Forums/office/en-US/02615820-ea7d-487d-825b-0a72e300cb59/how-to-replace-custom-aspx-task-form-with-default-spd-task-form-in-sharepoint-designer-workflow?forum=sharepointcustomizationprevious
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Help Renaming Workflow Custom Task Forms

I've got a custom workflow which has a few "Start Custom Task Process" actions. When I created them, the default names were Task (1), Task (2), etc. But I have renamed the Task within the Workflow. When I look at the Form's section of my Workflow in SharePoint
Designer, the File Names for those forms are Task_x0028_1_x0029_.xsn, Task_x0028_2_x0029_.xsn, etc. I can open the Form's in InfoPath and do the editing I want to, but I cannot get them renamed on the SharePoint server.
I've tried going to the Task Lists from within the Workflow via Customization>Open Task List, and then renaming them from there but that doesn't work. I've also tried renaming the actual file via Navigation>All Files>Workflows>Workflow Name but
that just breaks the link to the form when the task is executed.
Does anyone have any suggestions on how to rename these and have them show up with the proper name within the "Forms" section when working on the workflow?

I've found that when creating a "Start Custom Task Process" action -- the task is given a name, which by default will be "Task n" ... Even after renaming it --
prior to saving/publishing -- the name of the XSN file will be "Task_x0028_n_x0029_.xsn" and the name of the content type is still "Task _x0028_n_x0029_" -- which isn't ideal .... in large organizations with multiple workflow taks, this can get
really hairy, really quick.
While there are no errors or conflicts -- if these can't be renamed, they might as well be referenced by GUIDs and not have human-readable names!
Fortunately, the tip from Dennis at the bottom of this post describes perfectly how to rename the file by the back end .... it likely isn't for the feint of heart, changing the XML file [doing so inproperly can break the workflow] -- but it does work.
In addition to that tip, I'd recommend revising the name of the content type from Site Content Types -- this can be done from the UI and there's no need to edit the wfconfig.xml with the changes.
EDIT:
One more thing, the "Copy & Modify" function within SharePoint Designer which can be used to make copies of workflows -- when using this function, the custom task will be created as "Task (n) copy" and will need to be renamed.

How to REpublish Custom Task Forms (InfoPath) to SharePoint 2010 State Machine Workflows

I am new to SharePoint. Sorry if answer to my question is obvious.
I've create Custom Task Form in InfoPath and publish it (File/Publish/Network Location [Form Template Path and filename='MYPROJECT/Forms/ApprovalForm.xsn'; Form template name='ApprovalForm'], in the next window I've cleared Public URL according to the articlehttp://www.codeproject.com/Articles/195348/SharePoint-2010-State-Machine-Workflows-with-Custo).
After it I've added module Forms, and added ApprovalForm.xsn from the existing items.
My xml files: Elements.xml
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Workflow
Name="Order New Server"
Description="My SharePoint Workflow"
Id="482cbc86-b717-4981-a49a-3cf4c89e9399"
CodeBesideClass="Myproj.OrderNewServer.OrderNewServer"
CodeBesideAssembly="$assemblyname$"
TaskListContentTypeId="0x01080100C9C9515DE4E24001905074F980F93160">
<Categories/>
<AssociationData><Data></Data></AssociationData>
<MetaData>
<AssociationCategories>List</AssociationCategories>
<Task2_FormURN>urn:schemas-microsoft-com:office:infopath:ApprovalForm:-myXSD-2012-03-09T14-11-55</Task2_FormURN>
<StatusPageUrl>_layouts/WrkStat.aspx</StatusPageUrl>
</MetaData>
</Workflow>
</Elements>
Feature.Template.xml:
<?xml version="1.0" encoding="utf-8" ?>
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" ReceiverAssembly="Microsoft.Office.Workflow.Feature, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" Receiverlass="Microsoft.Office.Workflow.Feature.WorkflowFeatureReceiver">
<Properties>
<Property Key="GloballyAvailable" Value="true" />
<Property Key="RegisterForms" Value="Forms\*.xsn"/>
</Properties>
</Feature>
My form work fine, but when I make changes and republish it, it doesn't update (I see old form). What I tryed:
IISReset
Clear all cookies and cache in IE
Retract solution, restart VS2010, reboot computer.
Change assembly number, guid.
I have no ideas, what can I try for republish my form with changes.
Thank you in advance for any suggestions.
PS: sorry for my writing. English is not my native language.
PPS: when I save new Form to new location and add it to the project, it works.

I've found how can I republish changes. But it seems more like crutch than solution, but it works:
After republishing InfoPath form, I delete file from project (DEL on ApprovalForm.xsn in Solution explorer) and after it add it again. (Add/Existing Item). And then redeploy! Hurray!
Is there any way to redeploy a Task Form directly on the server without importing it in Visual Studio again? I am using some data connections in my task form which are different for different environments (staging, dev. etc.). Seems like I've to create a separate
Workflow WSP file for each envrionment. Any comments?

Problem refering to a custom activity in a SharePoint 2013 workflow

I have created a few custom activities to handle common tasks in a workflow. The activities are deployed in a separate sandbox solution from the workflows referencing them.
This has been working fine for a couple of months now, but suddenly I get an error when trying to activate the feature that provisions the workflow that refers to the custom activity (WriteMessage). The error is:
Error 1
Error occurred in deployment step 'Activate Features': Microsoft.Workflow.Client.ActivityValidationException: Workflow XAML failed validation due to the following errors:
Cannot create unknown type '{wf://workflow.windows.net/default/f0b36ec0-d40f-4df8-a99b-39f6dc4854a8/09e1bc2d-1cc8-4cff-ae22-32a52f54b685/$Activities}WriteMessage'. HTTP headers received from the server - ActivityId: ac291077-6536-4c63-b7b0-7701b6d29268. NodeId:
DKRDSSP15DEV03. Scope: /SharePoint/default/f0b36ec0-d40f-4df8-a99b-39f6dc4854a8/09e1bc2d-1cc8-4cff-ae22-32a52f54b685. Client ActivityId : e9d2bfd0-bb0e-4c28-bf55-8748368feb5b. ---> System.Net.WebException: The remote server returned an error: (400) Bad
Request.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
--- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.ActivityManager.Publish(ActivityDescription description, Boolean overwriteXClassName, Boolean terminateDependentInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishActivity(String serviceGroupName, ActivityDescription activity, Boolean overwriteXClass, Nullable`1 terminateInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.PublishActivity(FabricWorkflowManagementClient client, ActivityDescription activityDefinition, String serviceGroupName)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.<>c__DisplayClass5.<PublishDefinition>b__4()
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.InvokeWithEcosystemRetry(WorkflowServicesContext context, EcosystemRequiredMethod method)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.PublishDefinition(WorkflowDefinition workflowDefinition)
at Microsoft.SharePoint.WorkflowServices.WorkflowDefinitionStorageEventReceiver.PublishDefinition(SPItemEventProperties properties)
0 0
Vestas.SP.CMS.AlarmReports
I have tried creating a simple workflow using the custom activity, by referencing the sandbox solution. This works fine, if I create the simple workflow in a new project and deploys it and activate the workflow feature. However, if I create a similar simple
workflow in the original solution and omit the original workflows. Then I still get the above error when deploying / activating the workflow feature.
How do I clean up my original project so it does not give me this error when deploying and activating the workflow feature?
best regards
Lars Kohsel
Best regards Lars Kohsel

Hi,
As the error still occur when you create a simple workflow in the original project, maybe some configurations have been changed in the project.
You can check with the new created project whether there are some difference configurations in the project.
There is a similar article for your reference.
http://blogs.msdn.com/b/cliffgreen/archive/2013/03/11/sharepoint-2013-workflow-deployment-errors.aspx
What’s more, you can also copy your original project code to the new project, then check whether it works.
If it works, the we can use the new project instead of the original project.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

In Sharepoint 2013 Workflows, can a task be re-assigned?

I find that in SharePoint 2013 SP Designer based workflows, I can not find the settings to make the workflow tasks re-assignable.
This was possible in 2010, I can't find how or where to check off 're-assign task'.
Thanks, Roy Kim

Hi,
In SharePoint 2013 there two platform workflows, SharePoint 2010 workflow and SharePoint 2013 workflow. Which kind of workflow
do you want to create? If it’s 2010 based workflow, then to reassign task form is used the same method. If it’s 2013, then there only two task actions, assign a task and start a task process, these two actions can’t set to reassign the task form.
Best Regards.
Kelly Chen
TechNet Community Support

Custom SharePoint 2013 workflow activities in site template throw error on site creation

Hi all,
I have created a number of custom activities for SharePoint 2013 Workflows and I am using them on an Office 365 environment. The custom activities are packaged as a sandbox solution and deployed on my Office 365 site. Everything works as expected.
I have now created a site with all the functionality I need, including some Site and List workflows - all of them containing my custom activities. I saved the site as a template - including content - and the process was completed successfully.
My problem is that when I try to create a site based on that template, I get the following error:
Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_66b9230b_823e_4783_82b8_daf481237847' from scope '/spo/d42a4487-9465-4347-9f2c-a2718e92fc02/74d0f9e7-fb35-493d-86fb-ab7aa27da7e0/c2e1bf45-cf67-4e13-9755-421cf92395f8'
was not found. HTTP headers received from the server - ActivityId: 0997496a-5a15-4b83-82eb-727881eefa67. NodeId: . Scope: . Client ActivityId : c82f6e9c-9f8f-808b-7679-f2c0f92a339d. ---> System.Net.WebException: The remote server returned an error
After a number of trials and errors, I am certain that this relates to my custom activities. i have already tested all of the following scenarios:
Delete the workflow with the custom actions: Site is created successfully.
Create a new workflow with no custom actions and save the site as a template:
Site is created successfully.
Save the site template including a workflow with my custom activities, but not including content:
Site is created successfully, but my workflow is not there.
Create a new custom workflow activities sandbox with one custom activity that just writes something to the history list - just to make sure that this is not related to any specific solution. Save the site as a template:
Site creation throws the same error.
Packaged my workflow (with my custom activities) as a wsp from SharePoint Designer and deployed it as a custom solution. Activated the feature in the target site. The workflow gets created and executing finally. Saved the site as template: Site
creation throws the same error.
Same as above, but without activating the feature in the target site: Site created successfully, workflow works fine after I activate the feature in the new site.
My custom activities feature is always enabled in the site I save as template - in all of the above scenarios.
I have tested all of the above scenarios both on SharePoint 2013 on-premise and Office 365. There is
a forum post regarding some inconsistencies in the wsp file, but unfortunately this is not my case. Am I doing something wrong? Are custom 2013 workflow activities not supported in site templates - which would not actually make any sense, as it would "break"
the fundamental concept of re-usability.
Any ideas/feedback/guidance?
Thanx in advance

Hi,
I am facing the same issue. Kindly help me out if any of them have solved similar issue.
Your help would be appreciated.
manikantan

SharePoint 2013 workflow task gets canceled

Just wanted to share my solution to a problem that I was having when creating a SharePoint 2013 Workflow that includes creating a task and assigning it to a group of people. After publishing the workflow and initiating it you get:
Retrying last request. Next attempt scheduled in less than one minute.
Microsoft.SharePoint.Client.ResourceNotFoundException: Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals
An unhandled exception occurred during the execution of the workflow instance.
  Exception details: System.ApplicationException: HTTP 404 {"error":{"code":"-1, Microsoft.SharePoint.Client.ResourceNotFoundException",
  "message":{"lang":"en-US","value":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals."},
  "innererror":{"message":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals.",
  "type":"Microsoft.SharePoint.Client.ResourceNotFoundException","stacktrace":" at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathRoot(Boolean mainRequestPath, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestService.ProcessQuery(Stream inputStream, IList`1 pendingDisposableContainer)"}}
  } {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["46"]
  ,"SPRequestGuid":["624f66f8-a70c-81db-bf0d-c042443f5435"],"request-id":["624f66f8-a70c-81db-bf0d-c042443f5435"],
  "X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],
  "X-MS-InvokeApp":["1; RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 06 Apr 2015 22:17:23 GMT"],
  "Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at
  Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at
   System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
   System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
I was not able to find any answer anywhere, so my solution was:
1. Simply upgrade SharePoint Server 2013 to the latest version which in turn updates Microsoft.Activities.Proxy.dll
2. Clear the SharePoint Designer cache
  Workflow Error - Sharepoint Designer cannot display the item
  http://community.office365.com/en-us/f/154/t/74327.aspx
I hope this is helpful to somebody
Thanks

Hi Amit,
According to your description, my understanding is that you want to approve workflow task using web service in SharePoint 2013.
For troubleshooting this issue, please provide the more detailed code.
Here are some similar posts, please check if they are useful:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/b999a417-dce3-4590-9173-89aea91f23a3/complete-workflow-after-approving-all-tasks?forum=sharepointdevelopment
http://www.sharepointblog.in/2013/07/programmatically-approvereject-task-in.html
http://aarebrot.net/blog/2011/10/how-sloppiness-and-spworkflowtask-altertask-could-inadvertantly-lock-your-workflow-task/
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Forms based authentication in sharepoint 2013 using custom membership provider

I am developing FBA for SP2013 using custom membership provider using the following link
http://benredl.wordpress.com/2012/10/03/creating-forms-based-authentication-and-user-profiles-in-sharepoint-2013-using-custom-membership-and-role-providers-and-a-custom-user-profile-synchronization-utility/
the feature i am trying to develop is that the user is created using a homegrown asp.net application which uses sql server
and then When that user goes to SP2013 he should be able to login with the username and password created using the homegrown asp.net application
my questions are following
If I follow the article in the link should i be taking the assembly(dll) and deploying it to GAC or will VS2013 automatically do it
Do I have to implement FindUserByEmail and FindUserByName methods ?
if the connectionstring for an asp.net application is in the web.config file where would the connection for the sqlserver go if this application is for SharePoint
TIA

Hi TIA,
try this it contains the code for you and it is ready
http://sharepoint2013fba.codeplex.com/
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

How to Construct the Email To activity in SharePoint 2013 Workflow

I have a created a custom workflow and custom association and initiation form using SharePoint 2013.
My Assn. form is fine. I pass in the people picker (Active Directory group) value to my workflow just fine.
Now on my Init form I use the passed in value from people picker and display a list of users and email addresses from the people picker group. The list of users and email addresses are listed in a table with a check box to the left of each row. I am
using JQuery, Knockout and MVC web service to retrieve the values from the group.
All is well.
Now my users pick who they want to send the email to. Let's say they pick two users!
When the user clicks the submit button, I have JSOM code which starts the workflow and sends in the 2 users email addresses as an argument to theworkflow.
Note: I tried sending my two emails as a collection and failed. So i converted it to a string. The variable is called strUsers.
Since the argument is a string and Email Activity requires the To attribute to be an array, I use the BuildCollection<String> Activity to convert my string to an array.
Now in my workflow I use WriteToHistory Activity to write out my BuildCollection variable (recipients). Here's what is sent to the workflow history... [email protected];joejones@yahoo,com) Note:
Both names are bogus and I'm not Joe Jones.
I then configure the email Activity and set to To property to my BuildActivity variable (recipients).
When I deploy my Visual Studio 2013 solution, and attach my workflow to a publishing page, I am getting this error after I submit the Init form.
An unhandled exception occurred during the execution of workflow instance. System.ArgumentNullException.
Does anyone know of an example of how to set up the Email To collection value.
Note: I tried using comma and semi-colon for my string (strUsers). Neither worked.
Thanks
Tom
none

I think I'm getting close.
Here’s an
article
that helped me out and below is my code. Note: I added a ParseDynamicValue and GetDynamicValueProperty to push the data from the "emails" property to colleciton of strings called EmailCollect.
Here is what the data look likes
The value of Selected Emails is [{"emails":"[email protected]"},{"emails":"[email protected]"}]
Code excerpt in InitiationForm. Note: I am using MVVM and Knockout for the selected users from a list with checkboxes.
  //build array for workflow
  var emailUsers =
new Array();
  //cycle through viewmodel emails
for (var
i = 0; i < viewModel.SelectedEmails().length; i++)
var a =
new Object();
                    a["emails"]
= viewModel.SelectedEmails()[i];
                    emailUsers.push(a);
wfParams['strSelectedEmailsHMgr']
= JSON.stringify(emailUsers);
     // Get workflow subscription
and then start the workflow
var context = SP.ClientContext.get_current();
var wfManager = SP.WorkflowServices.WorkflowServicesManager.newObject(context, context.get_web());
var wfDeployService = wfManager.getWorkflowDeploymentService();
var subscriptionService = wfManager.getWorkflowSubscriptionService();
                context.load(subscriptionService);
                context.executeQueryAsync(
function (sender, args) {
// Success
var subscription =
null;
// Load the workflow subscription
if (subscriptionId)
                            subscription = subscriptionService.getSubscription(subscriptionId);
if (subscription) {
if (itemId !=
null && itemId !=
// Start list workflow
                                wfManager.getWorkflowInstanceService().startWorkflowOnListItem(subscription,
itemId, wfParams);
Now I deploy and publish the workflow but now I’m getting this error when trying to
System.InvalidOperationException: Looking up a value using a key is not supported on an instance of 'Microsoft.Activities.Dynamic.DynamicJsonArray'. at Microsoft.Activities.Dynamic.DynamicItem.TryGetValue(String
key, DynamicItem& value) at Microsoft.Activities.Dynamic.DynamicValueBuilder.PathSegmentFactory.ObjectPathSegment.Get(DynamicItem obj) at Microsoft.Activities.GetDynamicValueProperty`1.Execute(CodeActivityContext context) at System.Activities.CodeActivity`1.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
none

SharePoint 2013 - Workflow

Hi,
How to create a sharepoint designer workflows for InfoPath forms.
For example, I have a form library. When the user submits new form, it should trigger a workflow or an email to the approver with the link of this new form that the user has submitted. When the approver opens the link, it should open the InfoPath form and
after approval(approver should be able to approve using InfoPath form itself), it should reflect in the list.
Please let me know how to accomplish this task. I tried creating a simple workflow in sharepoint designer. What is happening is before, user approves the form frm InfoPath form, it is completing the workflow.
Kindly , help.
Thanks.
Hepsi

Hi,
I understand that you want to approve task in InfoPath Form.
If you create InfoPath with different views and you disable controls such as Approve/Reject Button according to current user, please make sure you create the workflow correctly.
There's a great blog that covers how to ask Leave Request, how to send email to leader and how to approve the form by leader, although it is about the SharePoint 2010, it still works for SharePoint 2013.
http://jamilhaddadin.com/2011/12/03/implementing-workflow-using-infopath-2010-and-sharepoint-designer-2010/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Sharepoint 2010 Workflow successful: Sharepoint 2013 Workflow UNsuccessful:

Observation 1
1. I created 2 workflows that write "completed" to the workflow history
a. 1 workflow uses sp2010 workflow manager
b. 1 workflow uses sp2013 workflow manager
2. sp2010 workflow works fine; it will start either manually or automatically (when a new item is created ) without issue; "completed' is written to the log as expected. Good.
3. sp2013 does not start automatically (when a new item is created ); when trying to start manually I get error message "Something went wrong. To try again, reload the page and then start the workflow." Which I do, but still fails.
Bad.
4.On Workflows.aspx I can see the links to start the 2 workflows manually.
a. When I hover over the sp2010 workflow link I can see something that look like this:
http://playground/sites/falcontt/_layouts/15/IniWrkflIP.aspx?List={ae95de8e-508b-4aa6-b4b6-490288e35e9f}&ID=53&ItemGuid={697E4218-D889-4FB8-A27B-D188F5D93250}&TemplateID={199c3d86-89a8-4286-b285-37e2d2067b52}&Source=http%3A%2F%2Fplayground%2Fsites%2Ffalcontt%2FLists%2FTrouble%2520Tickets%2Fall%2520requests%2Easpx
b. But when I hover over the sp2013 workflow link I can see something that look like this:
javascript:StartWorkflow4('949cb889-9b46-4959-9673-842e60cc5a42', '53', '{697E4218-D889-4FB8-A27B-D188F5D93250}')
Should this link also look similar to the sp2010 workflow link? If so, do you have any idea why it is different?
Observation 2
In Sharepoint Designer 2013, when I goto Navigation -> Workflows and click on the 2010 workflow, I see a file listed under "Forms" that looks like this "sp2010 test workflow.xsn". By the way the name of the workflow happens
to be "sp2010 test workflow".
But when I goto Navigation -> Workflows and click on the 2013 workflow, I see a NO file listed under "Forms". Should I see "sp2013 test workflow.xsn" listed there? If yes, can you think of why it is not listed there?
I saved the workflow debug logs from Event Viewer but won't share that info here unless necessary, to avoid making things look more complicated than they have to be.
Thanks for any comments suggestions, tips, questions, anything, etc.
Thanks and have a great weekend.
George

Hi George,
First of all, I'd like to clarify that workflow manager is dedicated for SharePoint 2013 workflow platform. SharePoint 2010 workflow is integrated in SharePoint server, while 2013 workflow is based on a new platform named workflow manager server.
In SharePoint 2013 designer, 2010 workflow has forms while 2013 workflow doesn't have forms.
For this issue, I suspect there is something incorrect with workflow manager. From the error message "Something went wrong. To try again, reload the page and then start the workflow", please flush the DNS cache via executing
IPCONFIG /FLUSHDNS, and restart workflow manager related services such as below, then recreate 2013 workflow to test the issue:
Service Bus Gateway
Service Bus Message Broker
http://blog.houratious.com/2014/05/sharepoint-2013-workflow-something-went.html
Regards,
Rebecca Tu
TechNet Community Support

SharePoint 2013 Workflow Calendar Entry Create Time AM PM Conflict

Windows 2012, SharePoint 2013 Enterprise.
I have a change control form that basically creates a calendar entry once it's been approved. Works well, but discovered a bug with the calendar create portion when there are events that have the same time in AM\PM.
Use case:
1. Create a change control item in the list with a planned start time of 2PM, I'll approve it, which then fires off a workflow and it will create an event in the change control calendar for 2PM, all good.
2. Create another change control item in the list with a planned start time of 2AM this time, I'll approve it, which then fires off a workflow and it will create an event in the change control calendar for 2PM and not 2AM. ???
Yes the original event entry created in the list shows planned start time of 2AM, but its being created in the calendar entry as 2PM. This only happens when the time is exact. For example if I had created the second entry at 3PM, it will create the calendar
entry at 3PM. It only happens if there is an existing entry for the same time, then all subsequent entries for the same time will have the same AM\PM depending on the first entry.
I can manually create an entry in the calendar and specify 2PM and it will take, so its something with the workflow that is causing it. The workflow is very simple all its doing is checking the item to see if the field says approved for the change request
form if so, create calendar event and carry over the fields, planned start time, planned end time, title description, that's it.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Hi James,
In my test per your description, I cannot reproduce the issue, however, I attached the screenshot of my test for your reference, let me know if there is misunderstanding.
Please capture the screenshot of your workflow process design so I can try to reproduce or find out if there is action that may cause the issue.
In addition, could you please try to locate workflow error message? If there is obvious error information, please refer to the Activate Workflow Manager Logs part in the article below:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SharePoint 2013 Workflow (SPD 2013) fails for Active Directory Group members

Hi
I have a SharePoint 2013 site called "Team Meetings". There are a number of lists and an InfoPath form library.
The site's SharePoint Group "Team Meeting Members" has two Active Directory groups (All Club Managers and All Club Police) as members. Those two AD groups contain all the people that I want to have access to the library and list, except for
a few additional folk who I have made individual members.
My PROBLEM:
I have created a SharePoint 2013 Workflow using SPD 2013 associated with the Form Library. Workflow is set to start on new or modified item. The first action is to write to history list, then determine the status (Submitted or Pending) of
the form and go to different Stages depending on that status.
The workflow works perfectly for any user who has been added directly to the SharePoint group (Team Meetings Members) BUT FAILS at the very first action for anyone who is a member of one of the AD groups. I know the Workflow is fine because I've tested it
with numerous people who are direct members of the SharePoint Group, but whenever a person who is a member of the AD group tries it the Workflow just fails.
Here's a print of the info from the Workflow Status page (I don't have access to server logs):
RequestorId: 4494760f-92ff-2e8c-90d2-cc7df0e6baa4. Details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPRequestGuid":["4494760f-92ff-2e8c-90d2-cc7df0e6baa4"],"request-id":["4494760f-92ff-2e8c-90d2-cc7df0e6baa4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 10 Mar 2014 01:31:42 GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
The HTTP response content could not be read. 'Error while copying content to a stream.'. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
Members of the SharePoint Group "Team Meetings Members" have Contribute Access to both the form library and another list that the workflow writes to as well as the Workflow History list (which in SP 2013 uses the credentials of the
user who started the workflow, unlike 2010 which used System Account).
All members of the Team Meetings Members group, whether they are individual members or part of one of the AD groups, have no problems opening and saving forms etc. It's just the Workflow that doesn't like them...
I am stumped. I've spent many hours searching for a reason for this. There are about 200 people in the two AD groups so I really don't want to have to add them all individually - especially when these groups are managed in AD for a whole bunch of other reasons
and using the AD groups means I'll basically never have to worry about modifying the SharePoint access permissions.
Does anyone have any ideas why this is happening and what I can try to fix it?
Mark

Hi Lars,
I'm afraid not so far but we are trying a few things today so I will post back with results.
First thing we are doing is making the AD Group universal because one of our (external provider) gurus remembers seeing something about that. He also sent me a link to a post where they were talking about earlier
versions but having similar issues and their solution was to make sure the app pool account has sufficient permissions in AD::
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/27a547da-5cc0-49d7-8056-6eb40b4c3242/failed-to-start-workflow-access-is-denied-exception-from-hresult-0x80070005-eaccessdenied
This part of that thread looks interesting but we haven't checked it yet as were trying the universal setting first:
"If the users participating in the workflows have been added to the SharePoint site via Active Directory groups, SharePoint has to update the user’s security token periodically by connecting to
the domain controller. By default, the token times out every 24 hours. But if the application pool account did not have the right permissions on the domain controller to update the user’s token, user will keep getting the access denied error. The error was
intermittent because when the user browsed to any page other than the workflow form, the token was getting updated successfully.
You can try to fix it through granting the application pool account the appropriate permission by adding the account to the group “Windows Authorization Access Group” in Active Directory."
I'll update when we try these ideas. If you have any luck please do the same.
Mark
(sorry about formatting - using my phone....)
Mark

SharePoint 2013 Workflow created on SharePoint Designer gets canceled

Just wanted to share my solution to a problem that I was having when creating a SharePoint 2013 Workflow that includes creating a task and assigning it to a group of people. After publishing the workflow and initiating it you get:
Retrying last request. Next attempt scheduled in less than one minute.
Microsoft.SharePoint.Client.ResourceNotFoundException: Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals
An unhandled exception occurred during the execution of the workflow instance.
   Exception details: System.ApplicationException: HTTP 404 {"error":{"code":"-1, Microsoft.SharePoint.Client.ResourceNotFoundException",
   "message":{"lang":"en-US","value":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals."},
   "innererror":{"message":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals.",
   "type":"Microsoft.SharePoint.Client.ResourceNotFoundException","stacktrace":" at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathRoot(Boolean mainRequestPath, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestService.ProcessQuery(Stream inputStream, IList`1 pendingDisposableContainer)"}}
   } {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["46"]
   ,"SPRequestGuid":["624f66f8-a70c-81db-bf0d-c042443f5435"],"request-id":["624f66f8-a70c-81db-bf0d-c042443f5435"],
   "X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],
   "X-MS-InvokeApp":["1; RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 06 Apr 2015 22:17:23 GMT"],
   "Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at
   Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at
    System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
    System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
I was not able to find any answer anywhere, so my solution was:
1. Simply upgrade SharePoint Server 2013 to the latest version which in turn updates Microsoft.Activities.Proxy.dll
2. Clear the SharePoint Designer cache
Workflow Error - Sharepoint Designer cannot display the item
   http://community.office365.com/en-us/f/154/t/74327.aspx
I hope this is helpful to somebody
Thanks

Hi,
I doubt its not possible.
http://stackoverflow.com/questions/17925555/windows-workflow-4-appfabrix-1-1-suspended-workflow-will-not-resume
http://social.msdn.microsoft.com/Forums/en-US/fd85c5f9-36dd-4be5-872f-9ba73b1eb0b8/appfabric-11-for-windows-server-versus-workflow-manager-10?forum=wfprerelease
http://seroter.wordpress.com/2012/11/02/interview-series-four-questions-with-jrgen-willis/
Please remember to click 'Mark as Answer' on the answer if it helps you

SharePoint 2013 Workflow Custom Task Form

Similar Messages

Maybe you are looking for