SharePoint 2013 Workflows

Hi there
I seem to be having trouble running any workflows using the 2013 engine in SharePoint Designer. The 2010 workflows work fine, however I cannot seem to get the 2013 ones to even start. Looking at the list/library settings, I can see the workflow has been
added but for whatever reason it doesn't seem to start.
I cannot even go back into a list item to view the workflow either...
Where to I even begin to try to unravel this mystery? HELP!! :-)
Many thanks in advance.

SharePoint 2013 Workflow engine has undergone a drastic change. Before you begin developing workflows in SharePoint 2013 you must ensure you
have taken care of the pre-requisites.
Ensure you have gone through each points in this article in configuring your Workflow Manager 2013:
https://technet.microsoft.com/en-us/library/jj658588.aspx
Before you start installing/developing SharePoint Workflows in 2013 you should to know few important points:
Never use ‘System Account’ to develop/run workflow, the workflow will fail to run.
You should not use ‘System Account’ to test the workflow.
You need to make sure User Profile Service (UPS) is running and the user who is running workflow has a profile created in UPS. Workflow Manager use UPS under
the hood.
Make sure App Management Service is created and running. You don’t need to configure SharePoint 2013 App settings in the server, just creating App Management
service (with proxy) will do.
Make sure the hidden feature WorkflowServiceStore is enabled.
Enable-SPFeature -Identity WorkflowServiceStore –Url $yourUrl
Note: To register Workflow Server with SharePoint, a SharePoint site collection URL is provided. Apparently it seems, each and every site collection need to be registered
with workflow server. But it’s not, registering a single SharePoint site collection, will enable workflow manager for all SharePoint web applications/site collections.
Now you can check from above listed points, which points resolves your issue.
More detailed troubleshooting steps on SP workflows 2013:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Please remember to click 'Mark as Answer'
if the reply answers your query or 'Upvote' if it helps you.

Similar Messages

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

SharePoint 2013 Workflow Lookup Column Error

When I try to use the value from a lookup column (e.g. display the selected value in the body of a email) in a SharePoint 2013 workflow I receive the following error. It works fine if I use the SharePoint 2010 workflow platform, but I always receive a error
with 2013.
First Error:
Retrying last request. Next attempt scheduled in less than one minute. Details of last request: HTTP NotFound to http://portal.test.com/sites/Test/_vti_bin/client.svc/web/lists/getbyid(guid'00000000-0000-0000-0000-000000000000')/Items(10)?%24select=ID%2CLookupId%2CLookup%2FTitle&%24expand=Lookup
Correlation Id: 3fb1bac9-f4b6-bbf1-a664-b3748668ea3c Instance Id: e7b4064d-029d-4a8b-9a75-7939f10e8817
<script type="text/javascript">// <![CDATA[ var errorMessage = "Something went wrong. To try again, reload the page and then resume
the workflow."; var dlg = null; function RetryWorkflow4(instanceName) { showDialog(); var ctx = SP.ClientContext.get_current(); var wfManager = SP.WorkflowServices.WorkflowServicesManager.newObject(ctx, ctx.get_web()); var instanceService = wfManager.getWorkflowInstanceService();
var instance = instanceService.getInstance(instanceName); instanceService.resumeWorkflow(instance); ctx.executeQueryAsync( function(sender, args) { closeDialog(); theForm.submit(); }, function (sender, args) { closeDialog(); alert(errorMessage); } ); } //
]]> </script>
Error from SharePoint Logs:
Microsoft.SharePoint.SPException: List does not exist. The page you selected contains a list that does not exist.
It may have been deleted by another user. ---> System.Runtime.InteropServices.COMException: List does not exist.
The page you selected contains a list that does not exist.
It may have been deleted by another user.     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt,
Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
    at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32
dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData,
Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.ItemByInternalName(String strInternalName, Boolean bThrowException)
at Microsoft.SharePoint.SPListCollection.GetListById(Guid uniqueID, Boolean bThrowException)
at Microsoft.SharePoint.SPListCollection.get_Item(Guid uniqueID)
at Microsoft.SharePoint.SPListCollection.GetList(Guid uniqueId, Boolean fetchMetadata)
at Microsoft.SharePoint.SPListCollection.GetById(Guid uniqueId)
at Microsoft.SharePoint.ServerStub.SPListCollectionServerStub.InvokeMethod(Object target, String methodName, ClientValueCollection xmlargs, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.ServerStub.InvokeMethodWithMonitoredScope(Object target, String methodName, ClientValueCollection args, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.InvokeMethod(Boolean mainRequestPath, Object value, ServerStub serverProxy, EdmParserNode node, Boolean resourceEndpoint, MethodInformation methodInfo, Boolean isExtensionMethod, Boolean isIndexerMethod)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathMember(Boolean mainRequestPath, String path, Object value, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()
at Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()

Hi
XantosX5 ,
Thank you for your posting!
According to your description, I try to reproduce your scenario in my SharePoint Server 2013 environment.
I create a lookup column in a list and create a workflow 2013 for the list. In the workflow, I add Send an email action. Then I display the lookup column in the body of the email as the below figure:
When I start the workflow, it works fine.
Have you installed
the workflow manager 1.0 cumulative update 1 ? It can be the point. If not, please install it.
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Sharepoint 2010 Workflow successful: Sharepoint 2013 Workflow UNsuccessful:

Observation 1
1. I created 2 workflows that write "completed" to the workflow history
a. 1 workflow uses sp2010 workflow manager
b. 1 workflow uses sp2013 workflow manager
2. sp2010 workflow works fine; it will start either manually or automatically (when a new item is created ) without issue; "completed' is written to the log as expected. Good.
3. sp2013 does not start automatically (when a new item is created ); when trying to start manually I get error message "Something went wrong. To try again, reload the page and then start the workflow." Which I do, but still fails.
Bad.
4.On Workflows.aspx I can see the links to start the 2 workflows manually.
a. When I hover over the sp2010 workflow link I can see something that look like this:
http://playground/sites/falcontt/_layouts/15/IniWrkflIP.aspx?List={ae95de8e-508b-4aa6-b4b6-490288e35e9f}&ID=53&ItemGuid={697E4218-D889-4FB8-A27B-D188F5D93250}&TemplateID={199c3d86-89a8-4286-b285-37e2d2067b52}&Source=http%3A%2F%2Fplayground%2Fsites%2Ffalcontt%2FLists%2FTrouble%2520Tickets%2Fall%2520requests%2Easpx
b. But when I hover over the sp2013 workflow link I can see something that look like this:
javascript:StartWorkflow4('949cb889-9b46-4959-9673-842e60cc5a42', '53', '{697E4218-D889-4FB8-A27B-D188F5D93250}')
Should this link also look similar to the sp2010 workflow link? If so, do you have any idea why it is different?
Observation 2
In Sharepoint Designer 2013, when I goto Navigation -> Workflows and click on the 2010 workflow, I see a file listed under "Forms" that looks like this "sp2010 test workflow.xsn". By the way the name of the workflow happens
to be "sp2010 test workflow".
But when I goto Navigation -> Workflows and click on the 2013 workflow, I see a NO file listed under "Forms". Should I see "sp2013 test workflow.xsn" listed there? If yes, can you think of why it is not listed there?
I saved the workflow debug logs from Event Viewer but won't share that info here unless necessary, to avoid making things look more complicated than they have to be.
Thanks for any comments suggestions, tips, questions, anything, etc.
Thanks and have a great weekend.
George

Hi George,
First of all, I'd like to clarify that workflow manager is dedicated for SharePoint 2013 workflow platform. SharePoint 2010 workflow is integrated in SharePoint server, while 2013 workflow is based on a new platform named workflow manager server.
In SharePoint 2013 designer, 2010 workflow has forms while 2013 workflow doesn't have forms.
For this issue, I suspect there is something incorrect with workflow manager. From the error message "Something went wrong. To try again, reload the page and then start the workflow", please flush the DNS cache via executing
IPCONFIG /FLUSHDNS, and restart workflow manager related services such as below, then recreate 2013 workflow to test the issue:
Service Bus Gateway
Service Bus Message Broker
http://blog.houratious.com/2014/05/sharepoint-2013-workflow-something-went.html
Regards,
Rebecca Tu
TechNet Community Support

SharePoint 2013 Workflow Calendar Entry Create Time AM PM Conflict

Windows 2012, SharePoint 2013 Enterprise.
I have a change control form that basically creates a calendar entry once it's been approved. Works well, but discovered a bug with the calendar create portion when there are events that have the same time in AM\PM.
Use case:
1. Create a change control item in the list with a planned start time of 2PM, I'll approve it, which then fires off a workflow and it will create an event in the change control calendar for 2PM, all good.
2. Create another change control item in the list with a planned start time of 2AM this time, I'll approve it, which then fires off a workflow and it will create an event in the change control calendar for 2PM and not 2AM. ???
Yes the original event entry created in the list shows planned start time of 2AM, but its being created in the calendar entry as 2PM. This only happens when the time is exact. For example if I had created the second entry at 3PM, it will create the calendar
entry at 3PM. It only happens if there is an existing entry for the same time, then all subsequent entries for the same time will have the same AM\PM depending on the first entry.
I can manually create an entry in the calendar and specify 2PM and it will take, so its something with the workflow that is causing it. The workflow is very simple all its doing is checking the item to see if the field says approved for the change request
form if so, create calendar event and carry over the fields, planned start time, planned end time, title description, that's it.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

Hi James,
In my test per your description, I cannot reproduce the issue, however, I attached the screenshot of my test for your reference, let me know if there is misunderstanding.
Please capture the screenshot of your workflow process design so I can try to reproduce or find out if there is action that may cause the issue.
In addition, could you please try to locate workflow error message? If there is obvious error information, please refer to the Activate Workflow Manager Logs part in the article below:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Custom SharePoint 2013 workflow activities in site template throw error on site creation

Hi all,
I have created a number of custom activities for SharePoint 2013 Workflows and I am using them on an Office 365 environment. The custom activities are packaged as a sandbox solution and deployed on my Office 365 site. Everything works as expected.
I have now created a site with all the functionality I need, including some Site and List workflows - all of them containing my custom activities. I saved the site as a template - including content - and the process was completed successfully.
My problem is that when I try to create a site based on that template, I get the following error:
Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_66b9230b_823e_4783_82b8_daf481237847' from scope '/spo/d42a4487-9465-4347-9f2c-a2718e92fc02/74d0f9e7-fb35-493d-86fb-ab7aa27da7e0/c2e1bf45-cf67-4e13-9755-421cf92395f8'
was not found. HTTP headers received from the server - ActivityId: 0997496a-5a15-4b83-82eb-727881eefa67. NodeId: . Scope: . Client ActivityId : c82f6e9c-9f8f-808b-7679-f2c0f92a339d. ---> System.Net.WebException: The remote server returned an error
After a number of trials and errors, I am certain that this relates to my custom activities. i have already tested all of the following scenarios:
Delete the workflow with the custom actions: Site is created successfully.
Create a new workflow with no custom actions and save the site as a template:
Site is created successfully.
Save the site template including a workflow with my custom activities, but not including content:
Site is created successfully, but my workflow is not there.
Create a new custom workflow activities sandbox with one custom activity that just writes something to the history list - just to make sure that this is not related to any specific solution. Save the site as a template:
Site creation throws the same error.
Packaged my workflow (with my custom activities) as a wsp from SharePoint Designer and deployed it as a custom solution. Activated the feature in the target site. The workflow gets created and executing finally. Saved the site as template: Site
creation throws the same error.
Same as above, but without activating the feature in the target site: Site created successfully, workflow works fine after I activate the feature in the new site.
My custom activities feature is always enabled in the site I save as template - in all of the above scenarios.
I have tested all of the above scenarios both on SharePoint 2013 on-premise and Office 365. There is
a forum post regarding some inconsistencies in the wsp file, but unfortunately this is not my case. Am I doing something wrong? Are custom 2013 workflow activities not supported in site templates - which would not actually make any sense, as it would "break"
the fundamental concept of re-usability.
Any ideas/feedback/guidance?
Thanx in advance

Hi,
I am facing the same issue. Kindly help me out if any of them have solved similar issue.
Your help would be appreciated.
manikantan

SharePoint 2013 Workflow (SPD 2013) fails for Active Directory Group members

Hi
I have a SharePoint 2013 site called "Team Meetings". There are a number of lists and an InfoPath form library.
The site's SharePoint Group "Team Meeting Members" has two Active Directory groups (All Club Managers and All Club Police) as members. Those two AD groups contain all the people that I want to have access to the library and list, except for
a few additional folk who I have made individual members.
My PROBLEM:
I have created a SharePoint 2013 Workflow using SPD 2013 associated with the Form Library. Workflow is set to start on new or modified item. The first action is to write to history list, then determine the status (Submitted or Pending) of
the form and go to different Stages depending on that status.
The workflow works perfectly for any user who has been added directly to the SharePoint group (Team Meetings Members) BUT FAILS at the very first action for anyone who is a member of one of the AD groups. I know the Workflow is fine because I've tested it
with numerous people who are direct members of the SharePoint Group, but whenever a person who is a member of the AD group tries it the Workflow just fails.
Here's a print of the info from the Workflow Status page (I don't have access to server logs):
RequestorId: 4494760f-92ff-2e8c-90d2-cc7df0e6baa4. Details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPRequestGuid":["4494760f-92ff-2e8c-90d2-cc7df0e6baa4"],"request-id":["4494760f-92ff-2e8c-90d2-cc7df0e6baa4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 10 Mar 2014 01:31:42 GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
The HTTP response content could not be read. 'Error while copying content to a stream.'. at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
Members of the SharePoint Group "Team Meetings Members" have Contribute Access to both the form library and another list that the workflow writes to as well as the Workflow History list (which in SP 2013 uses the credentials of the
user who started the workflow, unlike 2010 which used System Account).
All members of the Team Meetings Members group, whether they are individual members or part of one of the AD groups, have no problems opening and saving forms etc. It's just the Workflow that doesn't like them...
I am stumped. I've spent many hours searching for a reason for this. There are about 200 people in the two AD groups so I really don't want to have to add them all individually - especially when these groups are managed in AD for a whole bunch of other reasons
and using the AD groups means I'll basically never have to worry about modifying the SharePoint access permissions.
Does anyone have any ideas why this is happening and what I can try to fix it?
Mark

Hi Lars,
I'm afraid not so far but we are trying a few things today so I will post back with results.
First thing we are doing is making the AD Group universal because one of our (external provider) gurus remembers seeing something about that. He also sent me a link to a post where they were talking about earlier
versions but having similar issues and their solution was to make sure the app pool account has sufficient permissions in AD::
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/27a547da-5cc0-49d7-8056-6eb40b4c3242/failed-to-start-workflow-access-is-denied-exception-from-hresult-0x80070005-eaccessdenied
This part of that thread looks interesting but we haven't checked it yet as were trying the universal setting first:
"If the users participating in the workflows have been added to the SharePoint site via Active Directory groups, SharePoint has to update the user’s security token periodically by connecting to
the domain controller. By default, the token times out every 24 hours. But if the application pool account did not have the right permissions on the domain controller to update the user’s token, user will keep getting the access denied error. The error was
intermittent because when the user browsed to any page other than the workflow form, the token was getting updated successfully.
You can try to fix it through granting the application pool account the appropriate permission by adding the account to the group “Windows Authorization Access Group” in Active Directory."
I'll update when we try these ideas. If you have any luck please do the same.
Mark
(sorry about formatting - using my phone....)
Mark

Problem refering to a custom activity in a SharePoint 2013 workflow

I have created a few custom activities to handle common tasks in a workflow. The activities are deployed in a separate sandbox solution from the workflows referencing them.
This has been working fine for a couple of months now, but suddenly I get an error when trying to activate the feature that provisions the workflow that refers to the custom activity (WriteMessage). The error is:
Error 1
Error occurred in deployment step 'Activate Features': Microsoft.Workflow.Client.ActivityValidationException: Workflow XAML failed validation due to the following errors:
Cannot create unknown type '{wf://workflow.windows.net/default/f0b36ec0-d40f-4df8-a99b-39f6dc4854a8/09e1bc2d-1cc8-4cff-ae22-32a52f54b685/$Activities}WriteMessage'. HTTP headers received from the server - ActivityId: ac291077-6536-4c63-b7b0-7701b6d29268. NodeId:
DKRDSSP15DEV03. Scope: /SharePoint/default/f0b36ec0-d40f-4df8-a99b-39f6dc4854a8/09e1bc2d-1cc8-4cff-ae22-32a52f54b685. Client ActivityId : e9d2bfd0-bb0e-4c28-bf55-8748368feb5b. ---> System.Net.WebException: The remote server returned an error: (400) Bad
Request.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
--- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.ActivityManager.Publish(ActivityDescription description, Boolean overwriteXClassName, Boolean terminateDependentInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishActivity(String serviceGroupName, ActivityDescription activity, Boolean overwriteXClass, Nullable`1 terminateInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.PublishActivity(FabricWorkflowManagementClient client, ActivityDescription activityDefinition, String serviceGroupName)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.<>c__DisplayClass5.<PublishDefinition>b__4()
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.InvokeWithEcosystemRetry(WorkflowServicesContext context, EcosystemRequiredMethod method)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowDeploymentProvider.PublishDefinition(WorkflowDefinition workflowDefinition)
at Microsoft.SharePoint.WorkflowServices.WorkflowDefinitionStorageEventReceiver.PublishDefinition(SPItemEventProperties properties)
0 0
Vestas.SP.CMS.AlarmReports
I have tried creating a simple workflow using the custom activity, by referencing the sandbox solution. This works fine, if I create the simple workflow in a new project and deploys it and activate the workflow feature. However, if I create a similar simple
workflow in the original solution and omit the original workflows. Then I still get the above error when deploying / activating the workflow feature.
How do I clean up my original project so it does not give me this error when deploying and activating the workflow feature?
best regards
Lars Kohsel
Best regards Lars Kohsel

Hi,
As the error still occur when you create a simple workflow in the original project, maybe some configurations have been changed in the project.
You can check with the new created project whether there are some difference configurations in the project.
There is a similar article for your reference.
http://blogs.msdn.com/b/cliffgreen/archive/2013/03/11/sharepoint-2013-workflow-deployment-errors.aspx
What’s more, you can also copy your original project code to the new project, then check whether it works.
If it works, the we can use the new project instead of the original project.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

SharePoint 2013 workflow task gets canceled

Just wanted to share my solution to a problem that I was having when creating a SharePoint 2013 Workflow that includes creating a task and assigning it to a group of people. After publishing the workflow and initiating it you get:
Retrying last request. Next attempt scheduled in less than one minute.
Microsoft.SharePoint.Client.ResourceNotFoundException: Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals
An unhandled exception occurred during the execution of the workflow instance.
  Exception details: System.ApplicationException: HTTP 404 {"error":{"code":"-1, Microsoft.SharePoint.Client.ResourceNotFoundException",
  "message":{"lang":"en-US","value":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals."},
  "innererror":{"message":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals.",
  "type":"Microsoft.SharePoint.Client.ResourceNotFoundException","stacktrace":" at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathRoot(Boolean mainRequestPath, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()\u000d\u000a at
  Microsoft.SharePoint.Client.Rest.RestService.ProcessQuery(Stream inputStream, IList`1 pendingDisposableContainer)"}}
  } {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["46"]
  ,"SPRequestGuid":["624f66f8-a70c-81db-bf0d-c042443f5435"],"request-id":["624f66f8-a70c-81db-bf0d-c042443f5435"],
  "X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],
  "X-MS-InvokeApp":["1; RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 06 Apr 2015 22:17:23 GMT"],
  "Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at
  Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at
   System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
   System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
I was not able to find any answer anywhere, so my solution was:
1. Simply upgrade SharePoint Server 2013 to the latest version which in turn updates Microsoft.Activities.Proxy.dll
2. Clear the SharePoint Designer cache
  Workflow Error - Sharepoint Designer cannot display the item
  http://community.office365.com/en-us/f/154/t/74327.aspx
I hope this is helpful to somebody
Thanks

Hi Amit,
According to your description, my understanding is that you want to approve workflow task using web service in SharePoint 2013.
For troubleshooting this issue, please provide the more detailed code.
Here are some similar posts, please check if they are useful:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/b999a417-dce3-4590-9173-89aea91f23a3/complete-workflow-after-approving-all-tasks?forum=sharepointdevelopment
http://www.sharepointblog.in/2013/07/programmatically-approvereject-task-in.html
http://aarebrot.net/blog/2011/10/how-sloppiness-and-spworkflowtask-altertask-could-inadvertantly-lock-your-workflow-task/
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

SharePoint 2013 Workflow created on SharePoint Designer gets canceled

Just wanted to share my solution to a problem that I was having when creating a SharePoint 2013 Workflow that includes creating a task and assigning it to a group of people. After publishing the workflow and initiating it you get:
Retrying last request. Next attempt scheduled in less than one minute.
Microsoft.SharePoint.Client.ResourceNotFoundException: Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals
An unhandled exception occurred during the execution of the workflow instance.
   Exception details: System.ApplicationException: HTTP 404 {"error":{"code":"-1, Microsoft.SharePoint.Client.ResourceNotFoundException",
   "message":{"lang":"en-US","value":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals."},
   "innererror":{"message":"Cannot find resource for the request sp.utilities.utility.ExpandGroupsToPrincipals.",
   "type":"Microsoft.SharePoint.Client.ResourceNotFoundException","stacktrace":" at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPathRoot(Boolean mainRequestPath, EdmParserNode node, Boolean resourceEndpoint, MethodInformation& methodInfo)\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.GetObjectFromPath(Boolean mainRequestPath, String path, String pathForErrorMessage)\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.Process()\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestRequestProcessor.ProcessRequest()\u000d\u000a at
   Microsoft.SharePoint.Client.Rest.RestService.ProcessQuery(Stream inputStream, IList`1 pendingDisposableContainer)"}}
   } {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["46"]
   ,"SPRequestGuid":["624f66f8-a70c-81db-bf0d-c042443f5435"],"request-id":["624f66f8-a70c-81db-bf0d-c042443f5435"],
   "X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],
   "X-MS-InvokeApp":["1; RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 06 Apr 2015 22:17:23 GMT"],
   "Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at
   Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at
    System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
    System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
I was not able to find any answer anywhere, so my solution was:
1. Simply upgrade SharePoint Server 2013 to the latest version which in turn updates Microsoft.Activities.Proxy.dll
2. Clear the SharePoint Designer cache
Workflow Error - Sharepoint Designer cannot display the item
   http://community.office365.com/en-us/f/154/t/74327.aspx
I hope this is helpful to somebody
Thanks

Hi,
I doubt its not possible.
http://stackoverflow.com/questions/17925555/windows-workflow-4-appfabrix-1-1-suspended-workflow-will-not-resume
http://social.msdn.microsoft.com/Forums/en-US/fd85c5f9-36dd-4be5-872f-9ba73b1eb0b8/appfabric-11-for-windows-server-versus-workflow-manager-10?forum=wfprerelease
http://seroter.wordpress.com/2012/11/02/interview-series-four-questions-with-jrgen-willis/
Please remember to click 'Mark as Answer' on the answer if it helps you

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

SharePoint 2013 Workflow Permission

We are running into a problem with SharePoint 2013 and workflows.
We have the following site collection setup:
Site Collection
    Subsite A
    Subsite B
The following are the permissions:
[Site Collection] Owners
[Site Collection] Members
[Site Collection] Vistors
The members of these SharePoint groups are Active Directory security groups. If we put these AD groups into the SharePoint group we get the following error when trying to run a workflow:
RequestorId:
171a693d-7b50-a70a-0000-000000000000. Details: RequestorId: 171a693d-7b50-a70a-0000-000000000000.
Details: An unhandled exception occurred during the execution of the workflow
instance. Exception details: System.ApplicationException: HTTP 401
{"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access
denied. You do not have permission to perform this action or access this
resource."}}}
{"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPRequestGuid":["171a693d-7b50-a70a-ba75-67ea8bc83fb4"],"request-id":["171a693d-7b50-a70a-ba75-67ea8bc83fb4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4481"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0,
private"],"Date":["Tue, 16 Jul 2013 15:28:13
GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext
context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation
Obviously, this is a permissions issue. I am able to resolve the issue by adding individuals to the SharePoint group 1 by 1, however, I don't want to do this. Can anyone explain why this is acting the way it is?

Hi,
I am also running into this issue and am stuck in solving it.
I have a list workflow that runs on item change event, checks if a certain value is true and then should create a new list item in a list on a different site.
Site structure is the same as Hhancocks:
Site Collection
   Subsite A => workflow
   Subsite B => list where new item should be created
With the same HTTP REST call I can create a new item on any list of Subsite A, but as soon as I try to create the item on a list in Subsite B, I get the response Code "Unautherized" and the response:
{"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have permission to perform this action or access this
resource."}}}
I found the following blogs on the internet, none of which solved my issue:
http://www.sharepointviking.com/system-unauthorizedaccessexception-when-running-sharepoint-2013-workflows/
http://www.sharepointmaestra.com/Blog/Post/1/Workflow-2013-Not-Starting-on-Incoming-Email
According to this thread:
http://community.office365.com/en-us/forums/148/p/178921/527970.aspx the REST calls don't work in SharePoint online which would explain the behaviour in one of our environments, but the error also occurs for our on prem environment. The user triggering
the workflow has full control on both subsites.
Any hints would be really appreciated.

Is it supported to use shared mailboxes in SharePoint 2013 Workflows?

We try to send an email to a shared mailbox (Exchange 2007) from a workflow in SharePoint 2013. No errors are shown in the workflow but the message does not arrive in the mailbox. If we do the same with an user mailbox it works.
Both Exchange and SharePoint are on-premises.
Is it supported to use shared mailboxes in SharePoint 2013 Workflows?

If it is a mailbox then mail should be delivered.
Please check if mail is in C:\Inetpub\ pickup or drop folder
also check if emails to normal mailbox works fine

In Sharepoint 2013 Workflows, can a task be re-assigned?

I find that in SharePoint 2013 SP Designer based workflows, I can not find the settings to make the workflow tasks re-assignable.
This was possible in 2010, I can't find how or where to check off 're-assign task'.
Thanks, Roy Kim

Hi,
In SharePoint 2013 there two platform workflows, SharePoint 2010 workflow and SharePoint 2013 workflow. Which kind of workflow
do you want to create? If it’s 2010 based workflow, then to reassign task form is used the same method. If it’s 2013, then there only two task actions, assign a task and start a task process, these two actions can’t set to reassign the task form.
Best Regards.
Kelly Chen
TechNet Community Support

Sharepoint 2013 workflows and Due date

hi, i'm a sharepoint designer 2010 user, and i recently migrate to sharepoint 2013 (and use sharepoint designer 2013).
I understood it was impossible to migrate sharepoint 2010 workflow to sharepoint 2013 workflows ! But it was possible to call 2010 workflow from 2013 worikflow.
However, i thought i could reproduce workflow under SPD 2013. I recently discover that was not as possible as it seems
for example, it was possible to escalate a task after due date, under SP2010 workflow. I try to reproduce it under sharepoint 20103 workflow, but it seems not to be possible any more (i read this article >>
link <<!
Does any sharepoint's expert can confirm it to me !?
Mon blog : http://spinfopath2010.blogspot.fr/ Sharepoint online 2010 Sharepoint Designer 2010 - InfoPath 2010 - newbie level !

Also please note that you can combine both workflow engines together! It means you can create 2013 workflow using the new model and if you face any action which is no longer available (and you cannot find any other way, e.g. impersonation step) -
you are able to just easily invoke 2010 workflow with its set of actions.
To do so, please read following article, which also describes why some features are no longer available and how to implement these deprecated activities in 2013 environment:
http://msdn.microsoft.com/en-us/library/jj728659.aspx
Hi martin,
Yes, i know i can call a 2010 worklfow from a 2013 one, but it seems to me "tricky", and not a very good practice. Because, these workflows can be either deprecated or abandonned.
I prefered to use a "full" 20130 workflow instead of mixing it with an older version
Anyway, if there is no other way, i'll do it
Mon blog : http://spinfopath2010.blogspot.fr/ Sharepoint online 2010 Sharepoint Designer 2010 - InfoPath 2010 - newbie level !

Any way i can create and manage SharePoint 2013 workflows in browser.

Guys,
is there any way i can created and manager sharepoint 2013 workflows in browser like Nintex lets you do. This will eliminate the need for sharepoint designer.
thanks
MM

No. SharePoint's work flows are created from SharePoint Designer or Visual Studio. Third party solutions like Nintex have other approaches.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

SharePoint 2013 Workflows

Similar Messages

Maybe you are looking for