SharePoint crawled property with both lower and upper case

I have web page which has meta tag, like CN_ABC, then after I crawled these pages, and when I try to map this property to a managed property, I always see there are two crawled property available, one is CN_ABC, the other is CN_abc, only difference is
the lower case and upper case, I have seen this in many other site and many other meta tag, what was happening?

The meta tag you mean is a site column created for the page library?
This doesn't seem can be happened, if it is a site column, then it will create a crawled property for the column, named like: ows_sitecolumn, also, CN_ABC, CN_abc is not to distinguish lower or upper case, it should be CN_ABC or cn_abc.
I would suggest you to delete the related crawled property for the column, then do a full crawl, check whether it is happened, if it insistes, map the crawled property to different managed property, whether it returns same value.
Thanks,
Qiao Wei
TechNet Community Support

Similar Messages

  • Lower and upper case repair

    I have a macbook air. It felt down from my hand on its corner and has damaged. The up-left corner is chamfered like 0.5 cm on both lower and upper cases. I would like to know what can I do to repair its body since there is not any software problem with it. Does apple fix it and if yes, how much does it cost.
    Thank you.

    Welcome to the Apple discussions.
    Yes, Apple can repair. You'll have to take it to the Apple store to find out the cost, and you should probably be sitting down when they tell you the cost.

  • Translate search parameters to lower and upper case

    Hi All,
    I need to create a search function. Is it possible to translate the search paramaters to  both upper and lower case because inside the data there are data with upper case or lower case or both.
    Thanks in advance.

    Hi ,
      As per your requirement you have to write logic for three conditions :
    1. Translate whole word into upper case .
        TRANSLATE  your field name  TO UPPERCASE.
    2. Translate whole word into lower case .
        TRANSLATE  your field name  TO LOWERCASE.
    3. First character of your field should be in uppercase rest in lower case .
    so write your logic now considering third point also .
    Regards ,
    Nilesh Jain .

  • How to Handle the lower and upper case in 'POPUP_GET_VALUES'

    Hi All
    i am using the following FM and when i enter value on the
    popup in lower case or with capital letters i see the field
    with upper case ,this is problem for me since i need to
    take the field and compare it ,there is a way to handle this
    issue ?
    CALL FUNCTION 'POPUP_GET_VALUES'                      "#EC FB_RC
            EXPORTING
              popup_title     = lv_head_msg
            IMPORTING
              returncode      = lv_rc    " User response
            TABLES
              fields          = lt_field    " Table fields, values and attributes
            EXCEPTIONS
              error_in_fields = 1
              OTHERS          = 2.
    Best regards
    Alex

    Hi Alex,
    This because, the field and table name that You are passing in lt_field, has a conversion attached to it, which causes the converison in case.
    For e.g. If You pass MARA-MATNR and try to get the values from pop-up, the value will get converted to upper case, but if You pass MAKT-MAKTX (which does not have a converison attached to it), the value will be retrieved as it was entered. This is standard SAP, which is correct.
    If You need to get values of any text field, pass any SAP text field as reference in your table lt_field. Hope this helps...
    Rgds,
    Birendra

  • Duplicate members in lower and upper case

    Hi
    In BI I/O duplicate members are there in lower and uppercase. How to suppress these members while loading into BPC dimension.
    regards
    Mahi

    Hi Raghu
    In my case I want to load one of the duplicate members in BPC dimension. Say XYZ and xyz are two members in my BI I/o. but I want to load only XYZ or xyz.  I know selection option will work for loading transaction data for a set of members.
    regards
    Mahi

  • What are the Key Growth Drivers with both quantitative and qualitative analysis [geographical expansion, product, software development, resourcing, etc,]in SharePoint domain?

    What are the Key Growth Drivers with both quantitative and qualitative analysis [geographical expansion, product, software development, resourcing, etc,] in SharePoint domain

    Bravo. And your point is?

  • I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

    I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

    I'm having the same issue.  After opening Audio Midi Setup in Utilities I noticed that the master volume slider of the Built-In Output is very low.  I am not able to slide to get any more level out of the system.
    Can you adjust the master volume on your system?

  • Photos lower and upper menu don't disappear

    hi
    When browsing photos the lower and upper menu used to disappear after a few seconds. Now they don't. They stay over the top and lower part of the photos. Is there a place where you can change settings for this?
    Thanks
    Sami

    Hello Sami,
    In addition to the suggestions offered so far, without the ability to restore the iPhone, there are only a couple of things I can suggest.
    There are two methods that should turn off the, as mentioned, a tap on the display should get the bars to vanish. Holding your finger on a section of the image for about 1-2 seconds should also get the bars to turn off.
    There is no built-in setting that controls the display of the bars.
    You mentioned that you've "rebooted" the iPod. Did you mean powering it down and restarting it, or actually resetting it by holding down both buttons. If resetting with both buttons doesn't resolve the issue, the next step(s) would need to be done when you are back at your computer. Once you are back at your computer, the first thing you may want to do is import the pictures into whatever photo software you are using.

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

    Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

  • Sending emails with both body and attachment to multiple recipients

    I have a requirement to send email with body and attachment to multiple recipients.
    Body of the email is a standard text. It is a proxy-to-mail scenario.
    Here is what I've done: (I'm using PI 7.11)
    One mapping from Source to Target structure (format of the attachment text file)
    Second mapping from Target Structure to Mail Package format.
    In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
    "XIPAYLOAD" is the message protocol used.
    The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
    How to send an email with both content and text?
    The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
    Thanks for any input you can provide!
    Edited by: crazylad on Jan 18, 2012 3:39 PM

    Thank you for your response Mikael.
    For the first question, I was able to find the solution in the following blog:
    XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
    (I just needed to search with the right set of key words )
    The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
    Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

  • External hard drive use with both Mac and Windows

    I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

    Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
    (9844)

  • Cisco ISE with both internal and External RADIUS Server

    Hi
    I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
    I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
    So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
    I will like to know if it is possible to configure it and how I can do it ?
    Thanks in advance for your help
    Regards
    Blaise

    Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
    Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
    The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

  • In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC?

    In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC?  It is not very clear on the home page.  It shows both and mentions both, but doesn't specifically say BOTH come with the monthly $9.99/month plan.  Can somebody clarify?

    Special Photography Plan
    http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html

  • Form report with both edit and column link

    hi experts,
    How can we create form report with both edit and column link. Ie, the form should have both the Edit link and column link. When we click on the edit link(in page1) it should go for the page2 and the page2 should display the corresponding row fields which should be editable. but when i click the column link it should bring me to the next page but the corresponding values of the column should not be editable.
    Regars,
    KK

    hi,
    Here i have achieved this by making the column link and page navigation.

Maybe you are looking for