Sharepoint dashboards not rendering for everyone

Help!! Finally have my SharePoint Dashboard web Part installed and configured. Now I'm having a very odd issue. It seems that on some PCs the dashboard will not render. It doesn't seem to follow the user as I have at least 1 user
that the dashboard works on his PC, but when he logs onto mine, it doesn't. It doesn't render for me either. It doesn't appear to be tied to Silverlight or IE version either. Its also not a permissions thing as all my users already are either
console operators or scom sdmins already. Anyone have any ideas?

Is the browser IE on both occasions? I have had a similar issue with the webparts where it doesn't work on Mozilla - intermittently. i guess due to the silver light support issue. What is the error you get when launching the dashboard?- " An unexpected error
has occurred" - security connection session exception?? or permission related.
Also have you setup 'secured store credentials'? if yes, you could verify the secured store settings in the central administration..but since you mentioned it works for some user, strange though.
I am currently doing SharePoint web part integration for SCOM 2012, so It will be helpful if you post the error you get while loading the dashboards..or if it's just the page is blank!!

Similar Messages

Cryptographic exception in sharepoint - key not valid for use

Hi,
I have created a sharepoint application page to access an active end point on ADFS and establish a fedauth session. All works well in single server. But when the page runs behind load balancer with 2 servers, it fails with key not valid for use in specified
state exception. Stickiness is enabled on load balancer. verified that.
I had made few changes to config file in microsoft.identitymodel section to accomodate adfs custom login. This included removing securitytokenhandlers and issuertokenresolvers as well. Is this impacting the encryption/decryption in anyway?
Any pointers would help.
Reference point for my application page : http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=76

Thanks Brandon ,
But your support page presents a solution for the problem
regarding SSRS in "not integad whith sharepoint" mode <--Reporting Services Configuration tool
By consulting web, I discovered that another people
they encountered
the same problem->http://social.msdn.microsoft.com/Forums/en-US/35517aee-89d0-4668-94fc-9c7668e9dc35/unable-to-create-the-ssrs-service-application-in-sharepoint-ca?forum=sqldenreportingservices
But there is no solution there !!

Secure Zone password set (send log in details email) link not working for everyone

Hi Guys,
I have a site with three secure zones for different online programs. We're beginning to sell some programs and, because we aren't using a seemless gateway, we are manually subscribing them to the secure zones then clicking the 'Send log in details email' button. The email seems to be going out which is good. But, some clients can't click on the link to set their password. Nothing happens. Even if they copy and paste the link text into a browser window, still nothing.
Anybody know why this would be working for some people and not others. Could it be to do with cookies or email clients etc. We are at a loss and therefore have lost two sales so far (they asked for refunds) because they couldn't access their programs in the secure zone.
Any help greatly appreciated.

Thanks LiamDilley for such a prompt reply. Currently my code looks like this:
...and your password is [{tag_password}]
Are you saying that I should be changing the '[{tag_password}]' to:
[,a href="{tag_password}>{tag_password}</a>]
The thing is, most of the time the link text appears as a link, but not for everyone. Do you think this will fix it?

'id' attribute is not rendered for h:column tag in datatable

Hello Everyone,
There is a problem with rendering 'id' attribute for <h:column> tag. I'm using jsf 1.2_07.
Here is source code:
<h:dataTable id="reportList" var="item" cellpadding="1" cellspacing="0" border="0" value="#{myBean.reportList}">
<h:column id="column1">
<f:facet name="header">
<h:outputText value="#{textProps.selected}" style="white-space:nowrap;"/> </f:facet>
<h:selectOneRadio id="radio" onclick="javascript:setselected(this);">
<f:selectItem itemValue="#{item.id}"/>
</h:selectOneRadio>
</h:column>
<h:column id="column2">
<f:facet name="header">
<h:outputText value="#{textProps.name}" style="white-space:nowrap;"/>
</f:facet>
<h:outputText value="#{item.name}" style="white-space:nowrap;"/>
</h:column>
</h:dataTable>
Thanks for your help,
Sergei

The attribute "id" is set properly but isn't shown in html
because there is no html-element corresponding to UIColumn.

Responsive Design not rendering for smartphone

Can anyone take a look and tell me why my code isn't rendering on a smartphone?
http://donrobertosmicheladamix.businesscatalyst.com/
I use Protofluid and the css is rendering fine on that ... but not on my actual phone:) I'm driving myself crazy here.
Thanks!

Hi
There is not a great deal of difference between the iPhone 4 and the iPhone 5, as far as the Safari iOS browser is concerned.
Are both phones updated to iOS 6 OS?
AP Elements, are not the best solution for responsive designs, (or any design for that matter) but they should still render. They may make it necessary to scroll the browser in order to view the page.
I was going to suggest that you also try the BC forum but on checking I see that you have already done so.
If you have Edge Inspect installed, can I suggest that you take screenshots of what you are seeing on both phones. and post these on this forum and the BC forum, as it may help us if we can see the exact difference between the two phones.
PZ

SharePoint:SPShortcutIcon not working for subsites in IE (but works in Chrome)

All:
I'm trying to update the default FavIcon.ico on my share point site by adding a new icon in "Style Library" and adding the following line in my master page:
<SharePoint:SPShortcutIcon runat="server" IconUrl="/Style%20Library/Images/MyFavIcon.ico" />
This works fine in all browsers (including IE) on my main, top-level site. However, in a subsite which inherits its master page from the top-level site (e.g.
http://MySite/SubsiteA), the new icon doesn't show up in Internet Explorer. However the new icon displays just fine in other browsers such as Chrome. I've tried clearing IE's browser cache, etc. to no avail.
Any ideas?
Thanks,
Bill
Bill Davidson

Hi Bill,
Thanks for posting your issue here, Kindly browse the below mentioned URL for fix this issue. you will get complete code snippet in this blog
http://blog.qumsieh.ca/2013/01/25/sharepoint-2013-app-master-spshortcuticon/
http://msdn.microsoft.com/en-us/library/jj163816.aspx
I hope this is helpful to you. If this works, Please mark it as
Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog :
http://sharepoint-community.net/profile/DharmendraSingh

Image not rendering for html signature

I've created a CSS signature for my Mail signature (found at http://allforces.com/2006/04/14/css-signatures/) But no matter what I do the image (my logo) won't appear in the message. it's as if it can't find it on the machine. But when I open the file in Safari to create a webarchive, the image is rendering there. But when I save that webarchive and replace the signature file the image doesn't appear in the signature.
Anyone have any ideas?

ok I tried the instructions in that link and you are right, it is broken but it worked for me in one situation. If I create an html file using locally stored images and then convert it to a signature as outlined in this link it shows up correctly in the signature window in Mail prefs but the images don't show inside the message when i actually try to use the signature. Bummer.
However, when I made an html file using images stored remotely on a webserver, the effect was the opposite! The pictures didn't show in Mail prefs but they did work correctly in Mail composition window and on the recepient end. Very weird and certainly a bug but it's a semi workaround I guess.

Is FaceTime not working for everyone else or is it just me?

My facetime is being very weird, for the past three days it has gone between working and not working, at first it wouldnt allow me to connect to a call, it would just say "call failed" and other days it did allow me. I spent TWO hours on the phone with apple support and NO ONE could help!
WHATS GOING ON!!!

Download iOS 7 on to your iPhone. You should then be able to Facetime. However, I have the same problem with my iMac. It was okay on the 16th April but when I tried to Facetime on the 18th it wouldn't connect when I contact someone or someone tries to contact me. Still won't work. Must be a problem caused by Apple, but I just wish they would tell us how to solve it!!
Also update your iPad to iOS 7. No idea for iMac, wish I had!
Message was edited by: jennyb001
Message was edited by: jennyb001

Content Player navigation buttons not working for everyone

Hi,
Some of the participants are experiencing the issue with Content Player navigation buttons 'Continue' , 'End Test' etc..
We suspect it is because of the version of Java runtime environment on thier PC after eliminating the browser cache, or IE version issues.
Could anyone please tell me what are the supported Java versions for proper functioning of LSO600 Content player?
We are on ECC 6.0, LSO600 and SAP portal version EP7.
Any help is highly appreciated.
Thanks,
Jaya

Hello Jaya,
java supported version is more than JRE 1.4.2._07
and IE is IE6 and IE7
LSO supports Java 1.4.02_07 to java 1.6
Browsers:
Micorsoft IE6 and IE7.
Firefox from 2.2
If there is more than one Java version on the pc, try forcing the browser to use a certain version of Java by going to the control panel -> Java -> in java control panel go to -> java tab -> Click view in Java Applet run time settings -> Select one of the JRE to enable it and force the browser to use this version of Java.
Regards,
Manny

Splash page is not working for everyone

Greetings All,
My client has received several complaints by customers that
they can't see
the public website which opens automatically once the splash
movie is
finished playing. They say that all they can see is a yellow
screen. I
believe this might be due to the splash screen hanging when
they don't have
flash or a corrupt flash installed. Can anyone shed some
light on me as to
what might be the problem and a strategy toward fixing it.
The splash page seems to work fine on every computer I have
tried.
I'd hate to have to remove the flash page but that is just
what might have
to happen if I can't resolve this issue.
Here's the link:
http://www.groceryoutlets.com/
Many thanks,
FUdo

I'm a little confused.
You have a splash intro flash movie that they *can* see but
they can't see the main site:
http://www.groceryoutlets.com/home.aspx
the main site is not flash.
Is the issue that the redirect is never leaving the flash
page?
hard to say without the ability to reproduce it.
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
Fudo wrote:
> Greetings All,
>
> My client has received several complaints by customers
that they can't see
> the public website which opens automatically once the
splash movie is
> finished playing. They say that all they can see is a
yellow screen. I
> believe this might be due to the splash screen hanging
when they don't have
> flash or a corrupt flash installed. Can anyone shed some
light on me as to
> what might be the problem and a strategy toward fixing
it.
>
> The splash page seems to work fine on every computer I
have tried.
>
> I'd hate to have to remove the flash page but that is
just what might have
> to happen if I can't resolve this issue.
>
> Here's the link:
http://www.groceryoutlets.com/
>
> Many thanks,
>
> FUdo
>

10.1.2 Patch Does Not Work for everyone... Don't be fooled (Printing)

Dear Adobe,
As an enterpirse level organization (school district), your solution to resolve the Adobe PDF print issue does not work. Our only method so far has been to downgrade clients to 10.1.1 as this was the last stable build. Between your countless updates and patches, I would expect Adobe to have a viable solution in which we are not forced to touch thousands of computers individually to correct your flaws.
I would like to know if others are having problems with printing even after the patch. I have reached the point in which I am encouraging members of our team to start using FoxIt reader as it works with our environment.
Thanks.

I'd like to hear more about the problems you are having.
What specifically is going wrong?
Which patch did you apply?
What OS version and platform?
What type of printers are you using?
Are the printers on networks or connected directly to the computers?
Does the issue occur everytime you print or only on specific documents?
We have three docs that cover common issues with the Reader 10.1.2 update:
http://kb2.adobe.com/cps/928/cpsid_92870.html (includes a patch)
http://kb2.adobe.com/cps/924/cpsid_92412.html
http://cps-internal.corp.adobe.com/cps/928/cpsid_92893.html (includes a patch)
If your issues aren't covered, I'd like to make sure we address them so others can benefit.
Thanks much!

Update iBook that is not published for everyone?

I'd like to create an iBook and send it to some people.
Access should be restricted to a group of people. It should be possible to update the books' content.
Is it possible to password protect books that are published via the iBooks store?
Is it possible to host iBooks on a shared server / dropbox?
Any ideas how to do this?
Thanks!

topotropic wrote:
Is it possible to password protect books that are published via the iBooks store?
No. You need to distribute it yourself via email or a server like dropbox.

Skype Group Video: Free for everyone or not?

I've been paying for Skype Premium for 2 years now for group video chat. Now I read EVERYWHERE including Skype's website that says Skype Group Video chat is now free. So I chat with a Skype customer service guy to find out why I was charged for Skype Premium and why I even need it anymore. He tells me Group Video is NOT free for everyone and that it's coming in the near future. I asked him why the FRONT PAGE of Skype.com says it's free and all he says it that it's not free.
Anyone know what the deal is?
Here's page 2-3 for our chat log:
Spectral : at 16:20:44
so if Group calling I now Free, I do not need Skype Premium? Since that's all I used it for
Jogel V: at 16:18:06
Alright..
Jogel V: at 16:18:20
But you still don't have this free premium Robert..
Jogel V: at 16:18:43
What do you want to do to your Skype Premium? Tell me please so I can assist you
Spectral : at 16:22:24
Sorry, I don't understand. The front page of Skype says Group calling is now free for everyone
Spectral : at 16:22:48
I was paying for Premium to get Group calling.
Spectral : at 16:23:10
so now that group is Free. I do not need Premium
Jogel V: at 16:20:29
Yes I understand..
Jogel V: at 16:20:43
We cannot do that just in one day Robert..
Spectral : at 16:23:43
do what?
Jogel V: at 16:20:54
It takes time for everyone to have it..
Jogel V: at 16:21:06
It's moving Robert.
Jogel V: at 16:21:15
You can wait.
Jogel V: at 16:21:39
Like what I ve said, you will receive notification about this once Free Group video calling reached
you.
Jogel V: at 16:21:43
*reaches
Spectral : at 16:24:49
so group calling isn't Free even though Skype Web page says it's free?
Jogel V: at 16:22:19
It's free for some users Robert. As of now.. not for all.
Jogel V: at 16:22:27
We are still working on it.
Jogel V: at 16:22:43
I hope you understand..
Jogel V: at 16:23:01
So to settle this Robert, what do you want to happen??
Spectral : at 16:27:06
sorry, I don't. I know what you're saying. But why does www.skype.com says "Group calling is
now FREE". Nowhere does it say it's free to only "some" people.
Jogel V: at 16:24:27
Yes..
Jogel V: at 16:24:39
Because people think Skype is unfair.
Jogel V: at 16:24:45
Why just for some right??
Jogel V: at 16:25:04
The reason why we put "ALL" because all users will have it..
Jogel V: at 16:25:13
Just wait robert..
Spectral : at 16:28:10
"Will" have it?
Jogel V: at 16:25:29
Yes! "will" have it..
Jogel V: at 16:25:35
I said, it's moving..
Spectral : at 16:28:28
so Skype group calling isn't free right noiw?
Jogel V: at 16:25:43
For some//
Jogel V: at 16:25:49
not all users..
Jogel V: at 16:26:00
AS OF NOW..
Jogel V: at 16:26:34
Would there be anything else?

Indeed we had some changes recently with Group Video calling becoming a free feature in Skype. Some further reading here: http://blogs.skype.com/2014/04/28/skype-loves-bringing-groups-together-with-free-group-video-calling...
We therefor upgraded Skype Premium subscriptions as detailed here: https://support.skype.com/en/faq/FA34454/what-s-new-with-group-video-calling
The Skype Premium subscription you have includes an unlimited calling option to a country of your choice. This should get upgraded to an "Unlimited World" subscription allowing you to call 60+ countries while keeping the same subscription price. This upgrade hasn't seem to have happened yet for your account though.
If you don't think you will use the calling subscriptions please follow the instructions here to cancel your subscription. Then follow the instructions here to request a refund: https://support.skype.com/en/faq/FA297/how-do-i-request-a-refund
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Slideshow transitions not rendering

On a disk with 5 slideshows, the transitions were not rendered for the latter part of a single slideshow. Those transitions were "green screen."
Hard drive has over 25 GB free.
Everything else seems fine.

There has been a problem in slideshows with more that 99 images. Slides in a slideshow are treated as chapters, and a sloideshow s a track. Tracks are limited to 99 chapters and until iDVD 6, all iDVD slideshows were limited to 99 slides. Apple crated somethong of a 'hack' in iDVD 6 that makes it possible to link together several tracks creating a slideshow of more than 99 images. The problem is, not all DVD playrers like the hack and fail/refuse/have problems in trying to play long slideshows.
As far as the image quality,DVD are low resolution devices. NTSC DVDs are less than 0.3 megapixels. See Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html for suggested images sizes to be used in iDVD slideshows.
For long slideshows, create them as movie in iPhoto or iMovie. Many of us like Photo to Movie or FotoMagico (which I use).

SSRS report does not rendering properly in sharePoint 2013

Hi everyone,
I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
expected, some data mix-up on the matrix table
The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
Window server 2008 R2 with service pack 2
SQL server 2012 enteprise with service pack 2
SharePoint 2013 (no service pack) with integrated mode on the report service
Visual Studio 2010 development tools
I'm very appreciate for anyone can provide any solution to solve this issue.
Thank you so much,
Dac.
P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
But the Indent on IE and summation still persist in both browsers.

Hi everyone,
The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table.
Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
matrix table ... and the summation showed correct (it's so weird)
For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
Could someone can enlighten me please?
Many thanks.

Sharepoint dashboards not rendering for everyone

Similar Messages

Maybe you are looking for