Sharepoint Designer 2007 system requirements
I have been asked to take over the Website of our local genealogical society. The site was set up and is maintained using Sharepoint Designer 2007. We don't have any server or such, I have a Windows Vista x64 PC home computer. At the download site to get
SPD 2007 it says system requirements are for XP SP3. Will this product run OK on my computer or should I upgrade to a newer version of Sharepoint Designer before taking over this project?
the version of SharePoint Designer must match the version of SharePoint. For example, you can ONLY use SharePoint Designer 2007 with SharePoint Server 2007 (SharePoint Services 3 if you're using the free version), and you can ONLY use SharePoint Designer
2010 with SharePoint 2010, SPD 2013 with SP 2013.
SPD 2007 should work fine with Vista.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs
Similar Messages
-
SharePoint Designer 2007 - Errors with Edit Document Properties Form
All,
I'm using SharePoint Designer 2007 and in two of my document libraries when I upload content I get this error:
Object reference not set to an
instance of an object. at
Microsoft.SharePoint.ApplicationPages.UploadPage.GetEditFormUrl(SPFile spfile)
at Microsoft.SharePoint.ApplicationPages.UploadPage.OnSubmit(Object o,
EventArgs e)
at
System.Web.UI.HtmlControls.HtmlInputButton.OnServerClick(EventArgs e)
at
System.Web.UI.HtmlControls.HtmlInputButton.RaisePostBackEvent(String
eventArgument)
at
System.Web.UI.HtmlControls.HtmlInputButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String
eventArgument)
at
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl,
String eventArgument)
at
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)
So - when I open the EditForm.aspx page and attempt to add the proper Document Library Properties - and see that the Edit Document Properties Form is blank no matter what File - I try to add I get this Error:
“The page you have selected does not contain a reference to the correct SharePoint list”
Therefore - since the EditForm.aspx page hasn't been changed in a while - what are some items to look at to remedy this odd problem.All,
I fixed this - by Opening the page in Designer - going to Insert -> SharePoint Controls -> List Form then selecting the proper library from the list - then selecting Edit Item Form. I then right mouse clicked the library and selected Properties
-> clicked List Properties then clicked the Supporting Files tab and under the Edit Document Forms Property - selected the item as such - clicked OK - saved everything -> refreshed the browser then all worked! -
Hi All,
We are using SharePoint Designer 2007.When we try to open any page in designer we get following error,
"The Server could not complete your request. Contact your Internet Service Provider or Web server administrator to make sure that the server has the FrontPage Server Extensions or SharePoint Services installed"
If I click on Details button then I get the following message
"Object moved. Object moved to here."
Anyone experienced anything like this before?
Also when I try to edit sites when browsing on IE and than clicking on "Page" and "Edit in SPD2007" it's always
opening login.aspx site in SPD and that is the only one I can edit.
Kindly, please help me on this issue.Hello,
I have found one link for same issue, you might want to try it out:
http://voices.yahoo.com/sharepoint-designer-error-server-could-not-complete-7419812.html
Have you modified the custom provider in config file? Also see this link if this is the case for your second issue:
http://support.sharepointsolutions.com/entries/131560-Role-Manager-feature-has-not-been-enabled
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
How to set Mandatory Choice field while Creating Custom Task using Sharepoint Designer 2007
Hi,
I am new to Sharepoint development.I dont know whether i am posting the question in Correct place.Kindly redirect me to the correct place if i am posting it in wrong place.
I created a custom task in Sharepoint Designer 2007 using
Collect Data from User
Action.
I created a field in the task form which is of choice type and
unchecked allow blank values
because i wanted that field to be a mandatory field.When i handled that task ,i was able to complete that task
without selecting that mandatory field.But, I was expecting not to allow me to complete the task without selecting that field. Kindly tell me how to set the choice field as mandatory.Hi,
You are using SharePoint Designer 2007, so I moved the thread to the appropriate forum for MOSS 2007.
This is by design that
Workflow-generated form (for action Collect data from User) does not perform validation properly on drop-down choices, the workaround is to use JavaScript to perform the field validation.
This thread has the JavaScript code can help you:
http://social.msdn.microsoft.com/forums/en-US/sharepointworkflow/thread/0ad7fc3c-97a1-464e-ae89-c3133462dda8/
Xue-Mei Chang -
Insert webpart zone in tabs in webpart page using sharepoint designer 2010
Hi All,
I am facing a problem , its looks very easy but i couldn't found any clue about this.
i have created a webpart page, after this i have enable to view quick launch in this webpart page. then i have create a some tabs with reference to this site
https://jqueryui.com/tabs/. but the problem is when i go to view my page in browser it take same height which is same as quick launch height. and in my diff scenario i have created tab using content editor web part then its working fine. but
i need to create web part zone in these tabs that why i m not able to do this using content editor. so i am using designer only.
i guess i am writing content in wrong content place holder or etc. please help me ...i have already lost my 2 days for this.
FYI, please find the code which i used in webpart page using share point desinger.
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitle" runat="server">
<SharePoint:ListItemProperty Property="BaseName" maxlength="40" runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitleInTitleArea" runat="server">
<WebPartPages:WebPartZone runat="server" title="loc:TitleBar" id="TitleBar" AllowLayoutChange="false" AllowPersonalization="false"><ZoneTemplate>
<WebPartPages:TitleBarWebPart runat="server" AllowEdit="True" AllowConnect="True" ConnectionID="00000000-0000-0000-0000-000000000000" Title="Web Part Page Title Bar" IsIncluded="True" Dir="Default"
IsVisible="True" AllowMinimize="False" ExportControlledProperties="True" ZoneID="TitleBar" ID="g_14e08bcc_e32c_4759_80dc_34e124e6212f" HeaderTitle="abc1" AllowClose="False" FrameState="Normal"
ExportMode="All" AllowRemove="False" AllowHide="True" SuppressWebPartChrome="False" DetailLink="" ChromeType="None" HelpLink="" MissingAssembly="Cannot import this Web Part." PartImageSmall=""
HelpMode="Modeless" FrameType="None" AllowZoneChange="True" PartOrder="2" Description="" PartImageLarge="" IsIncludedFilter="" __MarkupType="vsattributemarkup" __WebPartId="{14E08BCC-E32C-4759-80DC-34E124E6212F}"
WebPart="true" Height="" Width=""></WebPartPages:TitleBarWebPart>
</ZoneTemplate></WebPartPages:WebPartZone>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderTitleAreaClass" runat="server">
<style type="text/css">
Div.ms-titleareaframe {
height: 100%;
.ms-pagetitleareaframe table {
background: none;
</style>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderAdditionalPageHead" runat="server">
<meta name="GENERATOR" content="Microsoft SharePoint" />
<meta name="ProgId" content="SharePoint.WebPartPage.Document" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="CollaborationServer" content="SharePoint Team Web Site" />
<script type="text/javascript">
// <![CDATA[
var navBarHelpOverrideKey = "WSSEndUser";
// ]]>
</script>
<%--<SharePoint:UIVersionedContent ID="WebPartPageHideQLStyles" UIVersion="4" runat="server">
<ContentTemplate>
<style type="text/css">
body #s4-leftpanel {
display:none;
.s4-ca {
margin-
</style>
</ContentTemplate>
</SharePoint:UIVersionedContent>--%></asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderSearchArea" runat="server">
<SharePoint:DelegateControl runat="server"
ControlId="SmallSearchInputBox"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderLeftActions" runat="server">
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageDescription" runat="server">
<SharePoint:ProjectProperty Property="Description" runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderBodyRightMargin" runat="server">
<div height="100%" class="ms-pagemargin"><img src="/_layouts/images/blank.gif" width="10" height="1" alt="" /></div>
</asp:Content>
<%--<asp:Content ContentPlaceHolderId="PlaceHolderPageImage" runat="server"></asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderNavSpacer" runat="server"></asp:Content>--%>
<%--<asp:Content ContentPlaceHolderId="PlaceHolderLeftNavBar" runat="server"></asp:Content>--%>
<asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server">
<html lang="en">
<head>
<meta name="WebPartPageExpansion" content="full" />
<meta charset="utf-8">
<title>jQuery UI Tabs - Default functionality</title>
<link rel="stylesheet" href="http://code.jquery.com/ui/1.10.3/themes/smoothness/jquery-ui.css">
<script src="http://code.jquery.com/jquery-1.9.1.js"></script>
<script src="http://code.jquery.com/ui/1.10.3/jquery-ui.js"></script>
<link rel="stylesheet" href="/resources/demos/style.css"><script>
$(function() {
$( "#tabs" ).tabs();
</script></head><body><div id="tabs">
<ul>
<li><a href="#tabs-1">Bangalore 1</a></li>
<li><a href="#tabs-2">Bangalore 2</a></li>
<li><a href="#tabs-3">Bangalore</a></li>
<li><a href="#tabs-4">Chennai 4</a></li>
</ul>
<table cellpadding="4" cellspacing="0" border="0" width="100%">
<tr>
<td><div id="tabs-1"> <%--id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" width="100%"> --%><WebPartPages:WebPartZone id="g_6958510ECBD74ABD8AA9F8E26B747B27"
runat="server" title="Zone 13"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone><WebPartPages:WebPartZone id="g_FA3DDD09582A4C589559877B7169340D" runat="server" title="Zone 14"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone></div></td>
</tr>
<tr><td><div id="tabs-2">
<WebPartPages:WebPartZone id="g_73928F4B9F484EE392EBCBA7D5ACF9FE" runat="server" title="Zone 1"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
<WebPartPages:WebPartZone id="g_77B2328C81874FFB8034559174B450BF" runat="server" title="Zone 12"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
</div></td></tr>
Please help..if u need any other detail i ll provide you.. plz check the image after doing this the tabs take full range as quick launch.
Thanks
Vivek Singh TomarYou do not need to work on visual studio, you can create page layout form web and sharepoint designer. Page layouts are only available on publishing sites, you can modify page layout using sharepoint designer, add your required html and web part zones.
Check below few links for reference:
http://msdn.microsoft.com/en-us/library/gg430141(v=office.14).aspx#bk_custompagelayout
http://www.mssharepointtips.com/tip.asp?id=1125
http://blogs.technet.com/b/tothesharepoint/archive/2013/04/10/stage-7-upload-page-layouts-and-create-new-pages-in-a-publishing-site.aspx
http://msdn.microsoft.com/en-us/library/gg430141(v=office.14).aspx#bk_custompagelayout
Page layouts creation and editing is almost same in MOSS 2007, SharePoint 2010 and SharePoint 2013. If you are creating page layout using web then you can easily modify it using SharePoint designer.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :) -
Hi there,
I know there are a lot of posts about "Failed to Start" errors, but I have yet to see one that describes our problem.
We have workflows built with SharePoint Designer 2007
Normally these workflows start ok and work completely
Occasionally though they will all fail to start, instead showing "Failed on Start (retrying)" in the Workflow Status and the following exception in the SP Logs:
01/16/2015 15:43:27.28 w3wp.exe (0x15D4) 0x1A00 Windows SharePoint Services Workflow Infrastructure 936l High Engine RunWorkflow: System.Workflow.ComponentModel.Compiler.WorkflowValidationFailedException: The workflow failed validation. at System.Workflow.Runtime.WorkflowDefinitionDispenser.ValidateDefinition(Activity root, Boolean isNewType, ITypeProvider typeProvider) at System.Workflow.Runtime.WorkflowDefinitionDispenser.LoadRootActivity(Type workflowType, Boolean createDefinition, Boolean initForRuntime) at System.Workflow.Runtime.WorkflowDefinitionDispenser.GetRootActivity(Type workflowType, Boolean createNew, Boolean initForRuntime) at System.Workflow.Runtime.WorkflowRuntime.InitializeExecutor(Guid instanceId, CreationContext context, WorkflowExecutor executor, WorkflowInstance workflowInstance) at System.Workflow.Runtime.WorkflowRuntime.Load(Guid key, CreationContext con...
01/16/2015 15:43:27.28* w3wp.exe (0x15D4) 0x1A00 Windows SharePoint Services Workflow Infrastructure 936l High ...text, WorkflowInstance workflowInstance) at System.Workflow.Runtime.WorkflowRuntime.GetWorkflowExecutor(Guid instanceId, CreationContext context) at System.Workflow.Runtime.WorkflowRuntime.InternalCreateWorkflow(CreationContext context, Guid instanceId) at System.Workflow.Runtime.WorkflowRuntime.CreateWorkflow(Type workflowType, Dictionary`2 namedArgumentValues, Guid instanceId) at Microsoft.SharePoint.Workflow.SPWinOeHostServices.Send(SPWinOeWorkflow winoeworkflow, SPWorkflowEvent e) at Microsoft.SharePoint.Workflow.SPWinOeEngine.RunWorkflow(Guid trackingId, SPWorkflowHostService host, SPWorkflow workflow, Collection`1 events, TimeSpan timeOut)
What is strange, is that if I recycle the App Pool for the SharePoint site and then restart the workflows, they all work fine for a time. Until the next time they don't =)
The workflows must be configured ok since they do work complete at time, but I wonder if there is something with the memory usage of the app pool or something that is being re-compiled when the App Pool is recycled
The App Pool is set to recycle nightly, and when virtual memory > 1700MB or memory > 1000MB
Is anyone able to shed any light on this problem?? Or what steps I can take to debug the problem further.
Thanks in advance
Miguel Clark =)Hi Sudip,
Thanks for the link.
The workflows in question are SharePoint Designer workflows using standard actions, so unsure exactly how to check the 'correlation tokens' and 'DLLs', plus the workflow works fine as soon as I recycle the IIS App Pool, so do not see how these could be the
problem
As to the 'lodctr' commands, we have tried these in the past, to no effect. Though may try them again next time the issue comes up just to see if it does the same thing as recycling the app pool.
My big question here is "why would it suddenly work after recycling the app pool??" I feel like it must be something memory related, since recycling the app pool releases the resources used by the IIS worker process.
Miguel =) -
Hi to all
I have team site in site collection under this i have Shared Document library. Now i want to create the workflow for the shared Document library. How i will create workflow using sharepoint designer for first review the documnet than go for approve
the document.Hi ,
According to your description, my understanding is that you want to create a workflow which contains review and approval process.
For implemening your requirement, you can create a workflow containing two steps. The first step is used to collect user information and set workflow variables, and the second step is used to verify whether the reviewer approve. If the reviewers complete
approving, a pproval workflow is started. The whole workflow is like :
More information, please refer to the links below:
http://www.documentmanagementworkflowinfo.com/sharepoint-video-tutorials/create-document-review-workflow-sharepoint-designer-2007.htm
http://office.microsoft.com/en-us/sharepoint-designer-help/watch-this-design-a-document-review-workflow-solution-HA010256417.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Can't open sharepoint site with sharepoint designer 2010
Hi there,
We've installed SP Foundation + SP Server 2010 and set up some sites.
when we tried to open it with SP Designer 2010, it fails and gave us some errors.
opening SPD through site actions :
unable to open website. possible causes:
1. the web server may not have sharepoint server installed
2. the web server may be temporarily out of service
3. if you are connecting through a proxy server, the proxy settings may be incorrect
4. an error may have occured in the web server
opening sharepoint site through SPD:
the folder 'http://mysp.domain.com/site/default.aspx' isn't accessible. the folder may be located in an unavailable location, protected with a password, or the filename contains a / or \.
the thing is ... we have no problem with sharepoint designer 2007.
any idea?Hi p.andrew,
If you want to open the site use SPD, you should enable the Client Integration for the web application at first.
Here are the steps:
1.
Go to this location : “Central administration” > “Security” > “Specify authentication provider”;
2.
Select the Web Application which you want to edit use SPD (SharePoint Designer 2010), and click the “Default” below the ‘Zone’;
3.
Select the “Yes” radio button
in the Client Integration section, and click the ‘Save’ Button;
4.
Close and re-Open the IE;
5.
Try to Open the site using SPD.
More information about this:
http://snahta.blogspot.com/2009/01/folder-may-be-located-in-unavailable.html
http://skurocks.wordpress.com/2009/06/26/enable-client-integration-user-permissions-for-web-application-%E2%80%93-caution/ -
Can we have a loop in SharePoint designer workflows?
I am using Infopath2013 form along SharePoint Designer workflows. The approvers are dynamically selected based on the multiple drop down selection. In certain scenarios, there may be 10 approvers and workflow should flow everyone in sequence with approve/reject
option. If anyone rejects, the workflow stops, else workflow should reach till 10<sup>th</sup> approver.
I am using Repeating table and I am able to capture all the 10 approvers and put them in a SharePoint list as column value. But in SharePoint Designer, I am not finding way to loop the task for the number of approvers.
Is there way create a loop in SharePoint workflows?
Thanks!
Ravi
RaviHi Ravi,
Do you use SharePoint Designer 2007?
Have you tried to use sequence approval workflow with participants in serial order?
http://office.microsoft.com/en-001/sharepoint-designer-help/understand-approval-workflows-in-sharepoint-2010-HA101857172.aspx
If you use SharePoint Designer 2013, there is an "loop" operation available you can take a look.
http://prasadtechtactics.blogspot.in/2012/07/sharepoint-designer-2013-workflows-part_24.html
Thanks
Daniel Yang
TechNet Community Support -
Webpart to Webpart workflow based email, Sharepoint Designer
Hi,
Trying to do: Using a workflow send an email from a document library to an announcement webpart
Situation: I have a sharepoint designer 2007 workflow that sends a reminder email to certain users when an expiry date on a document library is approaching. I would like this workflow to also send the notification email to an announcement webpart,
but I can't get the announcement webpart to receive the email. However, I can get the announcement webpart to receive an email from my exchange email account.
I have tried: Triple checked the email address, changed the security policy to receive emails based on list permissions and from any sender, the list email is
SafetyAnnouncement@xxxxxxx I have tried sending to this address and [email protected] I doubt the xxxxxxx portion is unique
to our sharepoint. So I also tried sending the email to safetyannouncement@"remote login URL".
Does anyone have any ideas? I am sure I am just missing something simple, or its one of those can't be easily done things.
Thanks
DavidHi,
According to your post, my understanding is that you want to send email via workflow while the assigned to field value changed.
We can create a helper field
which will store the previous value of the Assigned To, then you can compare the current value with previous value of assigned to and send an email accordingly.
I have made a simple workflow demo below, you can refer to it.
I have created a new single line of text type field AssignedPerson in the list, then use the workflow below to achieve your scenario.
More reference:
http://officepowerups.com/2013/07/09/send-email-when-specific-field-changes-in-sharepoint/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Create Custom list form and validate fields using sharepoint designer 2010
Hi All,
I have a requirement to create a custom job application form which will be filled and submitted by anonymous users. I have a an option to create custom user control web part but I wanted to
create it using custom list form using SharePoint designer. My requirement is below
Date of birth (user age should be above 22yrs )
Email Validation
Phone validation
Resume attachment (should attach only word documents or PDF)
Qualification (If other is selected then show textbox else hide)
Can above validations be done using SharePoint designer (JavaScript or validation controls)? Or do I have to create custom control web part?
MercuryManHello,
I think jquery/javascript can be used to put validations on those fields. Fortunately some of validation can be done via sharepoint itself like: email, phone, age. For Attachment and Qualification fields use jquery/JS.
See below link for column validations:
http://thechriskent.com/2012/08/15/validate-phone-number-columns-in-sharepoint/
http://sharepointsolutions.com/sharepoint-help/blog/2011/12/how-to-validate-an-email-address-using-column-validation-in-sharepoint-2010/
See this for attachment:
http://stackoverflow.com/questions/4234589/validation-of-file-extension-before-uploading-file
For qualification:
http://sharepoint.stackexchange.com/questions/88064/hide-show-field-on-list-form-based-on-value-from-another-field
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Hi,
We have a requirement to migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Info path forms to SharePoint 2013.
Can somebody please guide us as to what could be the best approach to go ahead?
Thanks in advance.
Regards,
VijayUse STSADM
backup and
restore to migrate SharePoint 2007 site
containing SharePoint Designer Workflows with Info path forms to SharePoint 2013. -
Hi
I want to know,
1. System requirement for VM based Sharepoint 2013 development environment for minimum 3 user's
2. SharePoint Topologies based on system architecture,system requirements
3. General SharePoint Development environment with all required services
4. SharePoint Deployment/Staging environment with all required services
Please help me to get the detailed informations on the above
Regards,
SivaHi Siva_SREC,
My environment built for three developers is a 3-tier SharePoint farm. The physical hardware has 32 GB RAM divided as the following virtual machines that all get hosted inside Windows Server 2012 Hyper-V (Datacenter edition)
Active Directory - 2 GB: Used to provide authentication to all joined virtual machines in the farm.
Enterprise Database - 6GB: Used to host all SharePoint databases and TFS database.
3 x SharePoint Farm - 6GB: It depends on how big your project are. For example, if you need each develop to develop SharePoint in particular farm then you should separate 3 farms. Each farm has a SharePoint farm configuration database and relevant database.
If you need multiple developers to develop on the same farm then you need to join another server to the existing farm.
Team Foundation Server - 4GB: Used to store source code and files and for development collaboration
We have remaining 2 GB and it's quite enough for the physical host to run Hyper-V. I've also had a few other machines for specific purpose. For example, I've done building a single WAC farm that provides Office Web App service to SharePoint. I could turn
off one of SharePoint machines when my developer isn't working in order to test OWA. If you are having chances to work on SharePoint 2013 app development project so you would need to have a dedicated machine acting as a Provider that is responsible for providing
web service to the SharePoint. Of course in this case you use provider-hosted app or the combination of SharePoint-hosted app and provider-hosted app. Personally, this machine shouldn't be joined to the AD domain controller. It should be a separate AD because
in real-world scenario, your provider isn't the same AD with client's environment.
In terms of SharePoint topology design, I'd consider configuring 2-tier farm (WFE & App) because in many cases, you would have to deploy your solution in the environment that has many machines separated each other.
At the end of the day, it all depends on your budget and the size of your project. I would say there is no silver bullet on the hardware requirement. For example, the hardware needed for large project is totally different from the one for just SharePoint
branding task.
Hope this helps you.
Regards,
-T.s
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter -
SharePoint Designer 2013 -- Workflow Manager is required to create Workflow
Hi,
Is workflow manager is required to create workflow in SharePoint Designer 2013 for List Workflow. Is there any other alternative for this.
With Regards,
Jaskaran Singh BhattiSharePoint 2013 supports both 2010 legacy type workflows that run in the OWS timer service on the SharePoint server and 2013 workflows that run on a server running Workflow Manager. You can still create the same kind of workflows you created in SharePoint
2010 without Workflow Manager. That would include 2010 List Workflows. You only need Workflow Manager if you want to create the newer kind of workflows that use Workflow Manager. All the built-in workflows still use the 2010 legacy workflow
system. Both types of workflows can be created using SharePoint Designer 2013.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
SharePoint Server 2013 single server installation licenses and system requirements
We are thinking of setting up a SharePoint Server 2013 for the following features to be accessed by our test team (<100 users)
Our requirements are as follows -
Total user access <100 users(starts with 50 and may be go upto 100)
Mainly Access to TeamSite(Document library), WiKi, BI reports view(SSRS Reports integration)
We have a Visual Studio Ultimate license that covers SQL Server 2012 and Share Point server 2013.
We have also got a Amazon EC2 machine access to create a Xlarge box with Microsoft recommended Cores, Memory, storage for SINGLE INSTALLATION of SharePoint Server 2013 and SQL server database on Windows Server 2012
My queries are as follows
Are the licenses above sufficient to go ahead with setting up the SP Server? or do i need any other licenses ?
I would like to create local LDAP in amazon without connecting to the company active directory. Would this be possible? We have users from other locations(different countries) providing services to our company and we would like them to access this portal
to share and access docuemnts without any network issue etc..
Are there any known firewall issues with EC2 machines for share point deployment
System requirements for single server installation (with or without BI reports)
Please note this implementation is only for internal use by the test team and is not critical. Not a production implementation.
Is there any better solution?
Much appreciate your help
Thanks
VaraMSDN subscription licenses for SharePoint aren't, as far as i know, for use as production devices. This means that whilst you can use it for testing and development you can't use that license for the SharePoint server that you'll all be using.
As such I think you will need to buy a SharePoint 2013 server license. The same goes for SQL, Windows etc.
There is also the question of user licenses, ie. CALs. I don't remember if those come included as part of an MSDN subscription.
2) Possibly. As long as Amazon can host a domain for you it should be possible.
3) Pass. Microsoft prefer you to use Azure and most of my training and experience is with that.
4) High. 4 cores, 24GB of RAM minimum.
http://technet.microsoft.com/en-us/library/cc262485.aspx#hwforwebserver
You'll either need a 2XLarge or a memory orientated box, in which case you won't have much storage space.
Internal team infrastructure is still important. If you're using it enough to make it worth having then you need it there and running.
Have you considered using Office 365?
Maybe you are looking for
-
Hi, I have already checked to see that I meet the requirements in the instructions (and answers on similar questions). I am using a CD direct from Apple of the software (a copy of a 10.6.4 CD). Yet the install CD says it can't be installed on my comp
-
Replacement from the Value of an Attribute*
Replacement from the Value of an Attribute With formula variables you can set the processing type Replacement from the Value of an Attribute and create a reference to the reference characteristic for the variable. The attribute Reference to Character
-
I have a string of text sms and iMessages that I would like to save and then delete them from my phone, but gain access to them later if I need them. I prefer to have the string with the date/time stamp vs copying and pasting into a doc or text file
-
Yosemite OS 10.10 printer drivers?
Are Canon behind the curve with their printer drivers for Mac OS? Have a great image runner C1028i. Great printer but I would love to use it. What are we supposed to do, put it out on the pavement? All help appreciated
-
MacBook Pro and Windows Media Player
So many of my former sites for news and humor use Windows Media Player almost exclusively. Although I have WMA on my MacBook Pro, it does not work for sites such as CNN and Comedy Central. I have tried dowloading the player again and flip for mac (wh