SharePoint Designer 2010 and Visio 2013 Issues

I currently have Visio 2013 and SharePoint Designer 2010 installed. I have two problems that I'm experiencing and any help would be greatly appreciated.
1. I'm able to export an already manually created workflow from SharePoint Designer 2010 as a .vwi file without a problem and am able to import the file into Visio Pro 2013. I
was also able to export the file from Visio once changes were made. However, when I go to import the file into SharePoint Designer I receive a message stating "This workflow cannot be imported because it was created in SharePoint Designer for a
different site, or the original workflow has been moved or deleted. To move a workflow between sites, use Save as Template (.wsp file) instead of Visio workflow drawing." I cannot figure out how to save it in the format the prompt is suggesting
as this is not available from the list of Save As options from Visio and when exporting from Visio the only format to do so is as a Visio Workflow Interchange (.vwi file). When exporting from SharePoint Designer I’m only able to export as a .vwi file
and the Save As option is not available in SharePoint Designer. Additionally, the file location where I exported from SharePoint and importing back into SharePoint is not changing, nor is the file name.
2. If I create a workflow from scratch within Visio utilizing the SharePoint 2010 shapes, I'm about to export without a problem and save as a .vwi file. I'm also able to import this workflow into SharePoint Designer, but the problem is the workflow
never actually shows up and I do not receive any errors.
Any help on either or both of these issues would be greatly appreciated.
Thanks,
Eric

Use Visio 2010. You may be running into a compatibility issue between Visio 2013 and Designer 2010.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Sharepoint Designer 2010 and Visio 2013

I am testing out Visio Professional 2013. I can import a VWI file from Sharepoint Designer 2010 and I can export a VWI file from Visio. But when I try to import the VWI file created in Visio 2013 into sharpoint Designer 2010 it appears to work, as
I don't get an error, but the work flow never appears. Any thoughts?

Hi,
Based on my research, if it is SharePoint Designer 2010, then the only edition that supports SharePoint workflows is Visio 2010 Premium edition.
And if you use Visio 2013, then it need to use SharePoint Designer 2013.
Reference from:
http://social.technet.microsoft.com/Forums/en-US/visiogeneral/thread/dc58f61f-1e93-4d2e-935f-bb665296611c
Jaynet Zhang
TechNet Community Support

Sharepoint Designer 2010 and HTML Editing

Hi -
This may sound like a stupid question, but is there WYSIWG in Sharepoint Designer 2010? I've got to do basic HTML code, insert items, insert links, insert columns/tables, etc. I don't see a way to do this in Designer? Maybe I'm blind? I
am used to coding in Dreamweaver. Should I just assume that I'm going to have to continue to do my code/designs in Dreamweaver and then copy it in to Designer?
I'm pretty confused, I thought I could do some basic HTML (aside of editing fonts/colors etc) in Designer. I'm basically trying to create a wiki page with FAQ style text and some images and buttons.
I'm new to all this, I come from an admin and web design background, not really a Sharepoint Design/Development background.
Thanks for any help!

You will normally need to edit a page in Advanced mode to get access to modify its HTML. This will unghost the page.
Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

How do I add a field into an existing form in SharePoint Designer 2010 and...?

I'm trying to add an existing field to an existing form in SharePoint Designer 2010. It's a URL to the employee's photo. But each time I try to "Insert as picture" the url to the photo has a trailing comma. Why and more importantly, how do I get
rid of it?
Thanks!

Hello,
See this similar thread:
http://sharepoint.stackexchange.com/questions/10149/comma-in-url-field
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Can't open sharepoint site with sharepoint designer 2010

Hi there,
We've installed SP Foundation + SP Server 2010 and set up some sites.
when we tried to open it with SP Designer 2010, it fails and gave us some errors.
opening SPD through site actions :
unable to open website. possible causes:
1. the web server may not have sharepoint server installed
2. the web server may be temporarily out of service
3. if you are connecting through a proxy server, the proxy settings may be incorrect
4. an error may have occured in the web server
opening sharepoint site through SPD:
the folder 'http://mysp.domain.com/site/default.aspx' isn't accessible. the folder may be located in an unavailable location, protected with a password, or the filename contains a / or \.
the thing is ... we have no problem with sharepoint designer 2007.
any idea?

Hi p.andrew,
If you want to open the site use SPD, you should enable the Client Integration for the web application at first.
Here are the steps:
1.
Go to this location : “Central administration” > “Security” > “Specify authentication provider”;
2.
Select the Web Application which you want to edit use SPD (SharePoint Designer 2010), and click the “Default” below the ‘Zone’;
3.
Select the “Yes” radio button
in the Client Integration section, and click the ‘Save’ Button;
4.
Close and re-Open the IE;
5.
Try to Open the site using SPD.
More information about this:
http://snahta.blogspot.com/2009/01/folder-may-be-located-in-unavailable.html
http://skurocks.wordpress.com/2009/06/26/enable-client-integration-user-permissions-for-web-application-%E2%80%93-caution/

Unable to Create Workflows with either SharePoint Designer 2010 or 2013 to our SharePoint Online Service

Hey there
I was wondering if anyone could shed some light on our current issue using SharePoint Online (hope this question is in the correct place)
We are using SharePoint Online and I believe we are using the SharePoint Plan 1 for EDU - which I believe is the A2 Free plan.
I have being trying to get my head around the new changes (as we currently run a standalone 2010 deployment) and decided to see what workflow options I had. I had read to use SharePoint Designer 2013 with the online service and after installation opened
the package, connected to the site and tried to create a simple email workflow. I first saw a loading screen stating
"The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.Activities, Version 1.0.0.0, Culture=neutral, PublicKeyToken=731bf3856ad364e35.
Contact your server administrator for more information."
after this it tried loading some metadata and then I saw:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
I close SPD down and rebooted and then same happened again and continues too.
After research I applied a hotfix that was known to resolve the issue, but it still remains. I also tried running SPD in admin mode but the same still happens.
Lastly I tried selecting workflows 2010 from the drop down field when creating the workflow to see what happened. I go the same. I also keep getting the following as a pop from time to time.
The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.Office.Workflow.Actions, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
Contact your server administrator for more information.
I have also tried to do the same in SharePoint Designer 2010, but receive the same massages.
What should I be looking at or doing to help rectify this?
Regards
RDH

uninstalled Language Pack and it worked!
Uninstalling the Preview and installing SharePoint Designer 2013 resolved the error.
http://community.office365.com/en-us/f/154/t/74327.aspx
According to the link as linle provided, there are two deletions in local, please double check these two places:
1.Delete all folders in the following directory:
C:\Users\USER\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache\
2.Delete the files in all folders in this directory:
C:\Users\USER\AppData\Local\Microsoft\WebsiteCache\ (don’t delete the folders, just delete the contents of the folders)
Then, try to create a new workflow in SharePoint Designer 2013 to see if it works.
You can first keep the list for the current status, and save it as a template which will be used to create another list.
1.Login and locate the associated list on your SharePoint Online.
2.Click List Settings under List tab, and click Save list as template.
3.Type a File name, Template name, select Include Content, and click OK. Click OK.
4.Click Site Actions->More Options->List.
5.Locate and click the newly saved template, type a name, and click Create.
Then, create a workflow in your SharePoint Designer 2010 associated to the new list to see if it works.
Moreover, please check if there are any maintenances on your SharePoint Online which may cause the issue.
1.Login to Office 365 Portal (https://portal.microsoftonline.com/).
2.Click Service Health in the left pane of Admin page.
3.Check the status of SharePoint Online
If this helped you resolve your issue, please mark it Answered

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013

Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013
Saidireddy

Hi
your little question, could have a big big answer, or answers ;)
To complete your question, ai will try
Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013 and Office 365
Isn't a simply an unique answer and deppends on your need , business needs, and you infrastructure. Depends also which type ( Foundation ( which is free ), Standard/ Enterprise )
Depends on you to read, learn and ask , punctually about one issue/problem/request
I recommend you to bing the net
http://www.bing.com/search?q=sharepoint+2007+vs+2010+vs+2013&pc=MOZI&form=MOZSBR
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

When building a vacation leave holiday system using SharePoint Foundation 2010 and SharePoint Designer workflows how can I add half day functionality?

Hi,
I have built a vacation leave holiday system for SharePoint Foundation 2010 using SharePoint Designer workflows and Javascript. Everything works perfectly but I'm struggling to design a solution for users to specify half day requests that span over dates
greater than 1 day, i.e. my half day solution works but only when the start and end date are the same. How would I change the user interface to allow users to choose which day they want the half day to be requested when the vacation leave holiday request is
from, say, 6th - 10th Jan 2014?
Thanks.

Hi ,
I have a test on my machine with a custom approval workflow and it can work normally .Here are the detailed steps :
1.
Open the site in SharePoint Designer .Create a workflow to associate with the document library .Set the workflow to start when an item is created and when an item is changed
.Also allow the workflow to start manually .
2.
Choose ‘Collect Data from a user’ .
3.
Click on the data and give a name to the Task created .
4.
Define the custom form field name as ‘Approve ?’ .Set the information type as Choice .
5.
Set the choices as ‘Approve’ and ’Reject’ .Display as Checkboxes .Uncheck the ‘Allow fill-in values’ and ‘Allow blank values’
.Click finish to save .
6.
Click on users and add the users who will approve the documents .
7.
Keep the output to variable as collect .
8.
Add a new step .Choose ‘If any value equals value ’ .Set the any value ‘Data source’ as workflow variables and parameters .Set the ‘Field
from source’ as Variable: collect .
9.
Set the value behind ‘equals ’ as ‘Approve’ .
10.
Add a new action ‘Update list item ’ .Set the item as current item .Add the field Approval status as Approved .
11.
Add an Else-if branch to update the Approval status as Rejected .
12.
Publish the workflow and test in your site .
Thanks,
Entan Ming

Need JavaScript for Sharepoint Designer 2010, to show a Pop-up to all the users between date range and the redirect the site

Dear all,
I am very new to Sharepoint designer 2010. Its better to say, i am just stepping in.
I have sharepoint site which is accessible for all the users to update few information. But i want this site not to be accessible during a date range, say from 15th to 20th of every month.
I am planning to have something like this: If any user tries to access this sharepoint site between 15th to 20th date range of everymonth, then the browser must show an pop-up alert saying "This site is not accessible during this date range" and Redirect
this sharepoint site to someother site (Say http:// somesitename.xx.com) immidiately.
I know very little about how to add Javascript in sharepoint webpart.
Please provide the Javascript or any best alternate solution to my concern.
Thanks in advance.

Hi,
From your description, my understanding is that you want to redirect sharepoint site to another site between 15th and 20th every month.
I agree with what Sudip says. If you still want to use JS code,You could try these steps
below:
Open your site with SharePoint Designer.
Click Master Pages in left navigation.
Find file v4.master, and backup it(it is very important).
Right click your v4.master,
choose "Edit File in Adavance Mode".
Add the code below into the <head/> tag.
<script src="https://code.jquery.com/jquery-1.11.1.min.js" type="text/javascript"></script><script
type="text/javascript">
$(document).ready(function(){
var today = new Date();
var day = today.getDate(); // get current day
var id = _spPageContextInfo.userid; // get the id of current logon in user
var boolFlg = false;
$.ajax({
   url: _spPageContextInfo.webAbsoluteUrl + "/_api/web/SiteGroups/GetByName(\'"+"sharepoint Owners"+"\')/Users", //get users in a specified group can access the sharepoint site from 15th to 20th every
month
   type: "GET",
   headers: {"accept": "application/json;odata=verbose"},
   success: function (data) {
      if (data.d.results) {
         var src = data.d.results;
         for(var i = 0; i < src.length; i++){
            if(src[i].userid==id){ //check the logon in user in the specified group or not
               boolFlg = false;
               break;
         if(!boolFlg){
            if(day <= 20 && day >=15){
                alert("This site is not accessible during this date range"); // alert the message
                location.href = "http:// somesitename.xx.com"; // redirect to another site
   error: function (xhr) {
      alert(xhr.status + ': ' + xhr.statusText);
})</script>
Best Regards
Vincent Han
TechNet Community Support

Errors were found when compiling workflow in SharePoint Designer 2010

Hello there,
I've run into a interesting issue in SharePoint Designer 2010 when publishing a workflow. I now get the below error
Normally when I get this message I simply clear the SharePoint Designer 2010 cache described in this
article, however, in this case the issue still continued. Hence I started the process of trial and error and quickly realized that the Update Item action was the culprit. In this action I am updating approximately 70 columns. Currently, I have two such
actions running in sequence. When I added the third Update Item action to do the same, I started getting this error.
Has anyone else experienced this before? In the workflow I am currently working on I am going to have to using the Update Item action several times and update approximately 70 columns hence I am open to other ideas to do the same.
Thanks in advance.

Hi Entan Ming,
Thanks for your reply, Hope you are aware that while we create any new workflow using SharePoint Designer 2013. There are two ways (We can say Platforms) to create the new workflow 1. SharePoint
2010 and 2. SharePoint 2013.
If I choose second one I. e SharePoint 2013, and try to create, save and publish workflow it`s working fine. But whenever I select option no. 1 i.e. SharePoint 2010 Platform to create
the workflow, I am able to Create it , save it , but while I try to publish it I got an error:
Errors were found when compiling the workflow. The workflow files were saved but cannot be run.
When I click on Advance I got message:
Unexpected error on server associating the workflow
My question is that, I am not able to publish any workflow in SharePoint 2010 Platform, using SharePoint Designer 2013.
Before publishing a workflow, I click on ‘Check for errors’ button, there was no any error found.
Thanks & Regards Mr. Bajirao Shinde

Unable to edit in SharePoint Designer 2010

I am having problems editing a simple SharePoint Team Site in SharePoint Designer 2010. I'm using SharePoint 2010 Foundation Server. I'm running Windows 8.1.
Receive pop up message:
Unable to open Web site. Possible causes:
The Web server may not have SharePoint Server installed.
The Web server may be temporarily out of service.
If you are connecting through a proxy server, the proxy settings may be incorrect.
An error may have occurred in the Web Server.

Hi Vuyo,
According to your description, my understanding is that you got an error when you opened a site with SharePoint 2010 Designer.
Please do as the followings:
Check whether SharePoint Designer is enabled in Center Administration->General Application Settings->configure SharePoint Designer settings, more inforamtion, please refer to
it.
Check your permission in that web site, ensure you have permission to open that web site in SharePoint Designer (Check in Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
Make sure the server that hosts SharePoint 2010 Deisgner can acccess your SharePoint sie correctly.
If this issue still exists, please run SharePoint Products Configuration Wizard, then compare the result.
In addition, here are some similar post for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
http://sharepoint.stackexchange.com/questions/18006/sharepoint-designer-unable-to-open-web-site
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_27968087.html
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

SharePoint lists are not showing in SharePoint designer "Lists and Libraries" section

Hi ,
I using sharepoint 2010 and sharepoint designer 2010.
I created a custom list on the sharepoint , and i trying to open the list through designer, but in sharepoint designer under the "Lists and Libraries" section that created custom list is not showing.
But when i click on "AllFiles-->Lists -->MyCustomlist " (its present in the root folder's "Lists" folder)
can anyone help on this.
regards,
RK

Hi,
According to your description, there is a list appears in “All Files” section but not in "Lists and Libraries" section in SharePoint Designer.
What if you refresh(F5) the SharePoint Designer in the "Lists and Libraries" section? Will the issue list appears?
If the list still doesn’t show up, please clear the cache of the SharePoint Designer and reconnect your site for a test.
About how to clear the cache of SharePoint Designer:
http://www.c-sharpcorner.com/UploadFile/sagarp/how-to-clear-your-sharepoint-designer-20102013-cache/
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Master page section on the left side of SharePoint Designer 2010

Dear all,
When I am editing my site in SharePoint designer 2010 - normally I used to get on the left hand side section - Master Page section. Now this is not appearing.
Kindly help - by providing inputs.
thanks
Sathya

Hi Sathya,
According to your description, my understanding is that the Master Pages Link Missing in your SharePoint Designer 2010.
For troubleshooting your issue, please take steps as below:
1.Login to the site collection.
2.From the Site Actions menu (top
left), select Site Settings.
3.On the Site Settings page, scroll down to the Site Collection Administration section, and then
look for the SharePoint Designer Settings link.
4.Click this link. The Site Collection
Administration's SharePoint Designer Settings page appears.
5.Check the setting, enable the Customizing Master Pages and Page
Layouts checkbox and other settings as desired, and then click
OK.
Reference:
http://social.technet.microsoft.com/wiki/contents/articles/21976.sharepoint-2010-master-pages-link-missing-in-sharepoint-designer-2010.aspx
http://sharepoint.stackexchange.com/questions/12191/why-dont-lists-and-libraries-show-up-in-sharepoint-designer
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to Install Sharepoint Designer 2010

Hi,
I am trying to install Sharepoint Designer 2010 but I am receiving the below error:
"The Installation of this package failed"
Please kindly help to resolve the issue and install SP Designer

Hi,
Thank you for your reply and the detailed additional feedback on how you were successful in resolving this issue.
Your solution will benefit many other users, and we really value having you as a Microsoft customer.
Have a nice day!
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Sharepoint Foundation 2010 and SSRS

Hi I have one small problem with Sharepoint Foundation 2010 and SSRS Integrated mode.
We have one installation with frontend and backend server, backend is installed on SSRS server and Kerberos authentication is enabled.
There are no problem to view reports with webparts but when you make one automatic subscription to make Report PDF files in one file share, it makes 5 och 30 files.
I can only find this in log files:
w3wp!library!18!01/26/2015-19:20:33:: i INFO: Skipped creating a dump file for the error InternalCatalogException, because a dump with the identical stack trace (with signature 1778776910) was already created.
w3wp!library!18!01/26/2015-19:20:33:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Unhandled exception in timer Database version check, Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details. ---> System.InvalidCastException: Unable to cast object of type 'System.DBNull' to type 'System.String'.
at Microsoft.ReportingServices.Library.ConnectionManager.GetDBVersion(Boolean rethrow)
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage(VersionVerificationOptions option)
at Microsoft.ReportingServices.Library.DatabaseVersionCheckTimer.DoTimerAction()
at Microsoft.ReportingServices.Diagnostics.TimerActionBase.TimerAction(Object unused)
--- End of inner exception stack trace ---;
Any ideas?

Hi Dalibor,
Based on your description, my understanding is that the error occurred when automatically making Report PDF files.
Could you please provide the version of SQL server in your environment?
If you are using SQL server 2012, I recommend to update the SQL server with SP1 and CU7 to see if the issue still occurs.
And please also re-configure the Reporting Service Application and then check the results:
https://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
https://msdn.microsoft.com/en-us/library/gg492276(v=sql.110).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

SharePoint Designer 2010 and Visio 2013 Issues

Similar Messages

Maybe you are looking for