Sharepoint Designer always crashes when using the Sharepoint people/group picker in a Workflow
SharePoint designer 2013 (sp1) crashes consistently when doing the following:
Create workflow
Create email action
In the email To field select People/Groups from SharePoint site
SharePoint Designer crashed and says "Microsoft SharePoint Designer has stopped working"
This issue has been reported before in SharePoint 2010 on TechNet as a bug in the software, but with no proper resolution. I am very surprised that it is still an issue in 2013 version (sp1 which was released Feb 2014) and Microsoft have not tried
to address this.
I have read elsewhere that the fix for this is to only have a single IIS binding for the site being used (ie not have additional alternate access mappings). However this is not possible for us as we need the additional alternate access mappings.
Any help/suggestions gratefully received.
Thanks
Bill W
One way is as you mentioned try the below link
http://xblogs.kompas-xnet.si/post/SharePoint-Designer-2013-Crashing-when-using-select-peoplegroups-from-SharePoint-site.aspx
Instead of setting people picker's Return field as "As String" could you please try setting the return field as Email Address
Destin -MCPD: SharePoint Developer 2010, MCTS:SharePoint 2007 Application Development
Similar Messages
-
Adobe Photoshop CS4/5 Crashes when using the Move Tool
Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel -
Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!
Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium -
Safari crashes when using the dialog box to import/save files, in facebook under windows 7
I've encountered the following errors in some PCs, running Safari 5.1.7 in MS-Windows 7 Pro:
Safari crashes when using the dialog box to import/save files. One doesn't have to actually upload or download any file, the mere invocation of the relevant dialog box brings down all open Safari windows after a couple of seconds.
Errors displayed in the Event Log are:
Όνομα ελαττωματικής εφαρμογής Safari.exe, έκδοση 5.34.57.2, χρονική σήμανση 0x4f982b5e
Όνομα ελαττωματικής λειτουργικής μονάδας CoreGraphics.dll, έκδοση 1.87.0.0, χρονική σήμανση 0x4f9739a0
Κωδικός εξαίρεσης: 0x40000015
Μετατόπιση σφάλματος: 0x0013a762
Αναγνωριστικό ελαττωματικής διεργασίας: 0x17f4
Χρόνος έναρξης ελαττωματικής εφαρμογής: 0x01cded6b09576023
Διαδρομή ελαττωματικής εφαρμογής: C:\Program Files\Safari\Safari.exe
Διαδρομή ελλατωματικής λειτουργικής μονάδας:C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
Αναγνωριστικό αναφοράς:ebe64ac9-595e-11e2-a977-0016356671d1
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:00.000000000Z
EventRecordID
95609
Channel
Application
Computer
computername
Security
EventData
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
17f4
01cded6b09576023
C:\Program Files\Safari\Safari.exe
C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
ebe64ac9-595e-11e2-a977-0016356671d1
and
Ελαττωματικός κάδος (bucket) 2970527469, τύπος 1
Όνομα συμβάντος: APPCRASH
Απόκριση: Δεν υπάρχει
Αναγνωριστικό Cab: 0
Υπογραφή προβλήματος:
P1: Safari.exe
P2: 5.34.57.2
P3: 4f982b5e
P4: CoreGraphics.dll
P5: 1.87.0.0
P6: 4f9739a0
P7: 40000015
P8: 0013a762
P9:
P10:
Συνημμένα αρχεία:
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
Αυτά τα αρχεία μπορεί να είναι διαθέσιμα εδώ:
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
Σύμβολο ανάλυσης:
Επανέλεγχος για λύση: 0
Αναγνωριστικό αναφοράς: ebe64ac9-595e-11e2-a977-0016356671d1
Κατάσταση αναφοράς: 0
+
System
Provider
[ Name]
Windows Error Reporting
EventID
1001
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:10.000000000Z
EventRecordID
95610
Channel
Application
Computer
computername
Security
EventData
2970527469
1
APPCRASH
Δεν υπάρχει
0
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
0
ebe64ac9-595e-11e2-a977-0016356671d1
0
I have tried in-installing safari but it seems not to help. I have tried installing it to a third, newly installed pc and come to the same result.
All PCs are fully up-to-date as it regards Microsoft and Apple patches. Any ideas as to why this might happen?Still having the same problem. Ever the optimist, I submit the following info.
Error window screenshot can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_01.JPG
Enent log entry can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_02.txt
Version info can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_03.JPG -
PSE crashes when using the Detail Smart Brush plenty of memory and speed -please advise
PSE crashes when using the Detail Smart Brush plenty of memory and speed -please advise
I have a similar thing happening here, but on my aging iMac8,1 (3.06, 6 gigs of ram, plenty of internal and external scratch space) No wacom here, a Logitech mouse though, running via USB overdrive.
With me it's undos that are typically causing the hang, and as such, I notice it happening and don't keep clicking around. It hangs for anywhere from 30 seconds to 3 minutes or so and then I can continue working. Once, it was happening on a document I had open for a while, once it was occurring on a file I opened, made an errant click, and hit undo. This was a 46.6 MB CMYK tif. I also had it occur while drawing a simple selection with the polygonal lasso - each time it would hang on the third click. That time, it would unhang, but then the selection would be all messed up and not display what was being selected.
Each time it happens, I see photoshop pinned at 99-100% in iStat. Doesn't seem to be related to running out of memory, as there is usually a good amount free when it's happening. I tried using the internal drive as the swap, and that didn't seem to matter.
I've been forced to go back to CS5 for the time being, but would love to see this solved. Is there any further info I could provide? -
Hi,
I have few sharepoint 2013 site's, which I am trying to open in sharepoint designer 2013.
After adding the site name in open site and clicking ok, the sharepoint designer crashes. At times the sites open, but 90% of the time, the sharepoint 2013 designer has crashed. I get the message "The server could not complete the request. For
more specific information, click on the Details button".
When clicking on "Details" button, there is a empty box. The error message never gets closed and have to kill the process.
I have tried doing "IISreset" multiple times, which has not helped.
Has anybody faced this issue? How to fix this?
ThanksHi Venkatzeus,
Firstly, I need to verify the followings:
1.Whether this issue occurred on a specify SharePoint 2013 site.
2.Whether you have extended the problematic site.
Make sure that your user is a site administrator. If you have extended the problematic site, please add it to AAM.
There are other probable causes for this issue:
1.Anonymous authentication is not configured for the problematic web application in IIS
Fix: Enable Anonymous authentication in IIS
2.Server is running out of memory
Fix: Free up memory on the server
Here are some similar articles for you to take a look at :
http://forums.bitwiseglobal.com/forum/sharepoint/the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-button/
http://tjendarta.wordpress.com/2013/05/24/fix-sharepoint-designer-2013-the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-below/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/11854880-e85d-4e4c-ae9c-0ffd640d33d8/error-the-server-could-not-complete-your-request-while-opening-site-in-sharepoint-designer?forum=sharepointadminprevious
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f93e155e-2c65-4744-a1d0-96cdbd50014d/sharepoint-designer-error-the-server-could-not-complete-your-request
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Aperture crashes when using the Crop Tool
I have tried using Aperture in 32 and 64 bit modes. I have the same problem in both when using the Crop Tool. Immediately after I hit "RETURN" key to finalize the crop I have chosen, the VIEW screen goes blank and the SPINNING BEACH BALL appears. I go to the "Force Quit" dialog and Aperture is highlighted in red--signifying a crash (unresponsive application).
THIS is happening more frequently.
Help!!I had a similar problem. I solved it with these instructions on my blog.
http://maximegousse.wordpress.com/2010/12/05/my-aperture-library-crash/
Max -
Why does Adobe 9 standard crash when using the digital signature
When using the digital signature in Adobe 9 standard it crashes, it has been repaired, uninstalled and reinstalled and still crashes when putting in the digital signature and not understanding why. Also the digital signature was redone. Your thoughts on this would be most helpful.
I had the same problems and was VERY frustrated.
I finally solved my problem by uninstalling reader 9.1, air, acrobat.com and THEN after a restart, installing a lite version of reader 9.1 from this site:
Good Luck!
rufus78 -
MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help
HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help
Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.
-
Is you mail app crashing when using the trash can delete??
Is anyone having a problem with mail app. crashing after using the trash can delete. I am no longer using the trash can so I have not had another mail crash. Swipe and delete and edit and delete work ok. Only the trash can delete causes the problem.
Alberta....I first tried the reset, which didn't work, so I had to do a full restore. Which helped has corrected the problem. I just can use the trash can delete.
-
Switching from text view to visual view in SharePoint Designer 2013 crashes 100% of the time
Whenever I am in SharePoint Designer 2013 and try to switch a workflow from text view to visual view, SharePoint Designer crashes. Text workflows work fine. I have tried any of the solutions that I could find including:
- Removing KB2837633 and 2768006 (neither were installed)
- Installing SharePoint Designer 2013 SP1 (KB2817441)
- Performing a "Repair" on both SharePoint Designer 2013 and Visio 2013
- Clearing the caches in the AppData directory
- Setting Visual as the default mode for workflows to open in (so, not exactly switching, but trying to open it directly in the visual view)
Event viewer reports that it is an issue with Microsoft.Web.Authoring.ni.dll which throws an unhandled exception, System.AccessViolationException.
This is the error message:
System.AccessViolationException was unhandled
HResult=-2147467261
Message=Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source=Microsoft.Web.Authoring
StackTrace:
at Microsoft.Web.Authoring.Workflow.XamlWrapper.GetStageInfo(UInt32 node, String& name, UInt32& transition, UInt32&
stageContainer)
There is no InnerException.
Can anyone suggest something else to try?
Thanks!Hi,
I have checked out the links above to no avail. I will keep looking. I have included the details from event viewer below.
Details from event viewer:
Event ID 1001
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: SPDESIGN.EXE
P2: 15.0.4569.1503
P3: 52b0b061
P4: Microsoft.Web.Authoring.ni.dll
P5: 15.0.4531.1000
P6: 51cb6bd8
P7: c0000005
P8: 0012f4b8
P9:
P10:
Event ID 1000
Faulting application name: SPDESIGN.EXE, version: 15.0.4569.1503, time stamp: 0x52b0b061
Faulting module name: Microsoft.Web.Authoring.ni.dll, version: 15.0.4531.1000, time stamp: 0x51cb6bd8
Exception code: 0xc0000005
Fault offset: 0x0012f4b8
Faulting process id: 0xc3c
Faulting application start time: 0x01cf69f7dfc05fc8
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\SPDESIGN.EXE
Faulting module path: C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\Microsoft.W7830ee34#\bed75c80b5bf64ca619a88ad4a48b674\Microsoft.Web.Authoring.ni.dll
Report Id: 45c4e398-d5eb-11e3-8ff3-7054d21a367e -
SharePoint Designer 2013 crashes when creating a custom workflow...
I have never had this problem with SPD2010 and the default workflow 2013 templates do not provide the features that I need so creating this workflow using the online UI is not an option.
I have uninstalled SPD2013 two times now and I have tried creating a new list and I still have the problem. It's critical for my project that we are able to create custom workflows so this is a HUGE blocker for me so any help would be appreciated.
Thanks
RickDid you ever get a response?
-
Acrobat crashes when using the Instance Manager
I am using Designer 7.0/Acrobat 7.0.1 on Win XP SP 2 (and tested on two other machines with the same config), and also Mac OS X 10.3.9 with Acrobat 7.0.1.
The crash occurs when my script tries to hide a subform, but only when the script is called from a Drop-Down List. I have mocked up a brand new PDF and the problem is still there:
http://members.optusnet.com.au/machelp/crash.pdf
If you click the Show/Hide Subform buttons it works fine. If you choose an item from the List Box it shows the subform correctly, and then choose one of the 'Other Mag' items and it hides the subform correctly. Do the same process with the Drop-Down List and it is guaranteed to crash when you choose an 'Other Mag' item (which should hide the subform). The Mac has no problem with crashing at all!
The crash message (that appears after the 'Send feedback to Microsoft' message is 'The instruction at "0x2d864aa2" referenced memory at "0x00000008". The memory could not be "read". Click on "OK" to terminate the program.' This exact error happens on all PC's that I tested on, in Acrobat Pro or Reader.
Can someone please help me identify if this is a bug in Acrobat or is there something I'm not doing right?
Many thanks in advance, Mike.
PS. Also Designer crashes
i a lot
when laying out forms. Does this happen to anyone else?I would send this to Adobe Support.
-
Weblogic Server 9.2 Crashes when using the JMS Wrapped Connection Pooling.
===== BEGIN DUMP =============================================================
JRockit dump produced after 0 days, 01:05:05 on Thu Sep 16 18:27:36 2010
Additional information is available in:
E:\obopay\servers\EWP_9.2_Domain\jrockit.4516.dump
E:\obopay\servers\EWP_9.2_Domain\jrockit.4516.mdmp
If you see this dump, please open a support case with BEA and
supply as much information as you can on your system setup and
the program you were running. You can also search for solutions
to your problem at http://forums.bea.com in
the forum jrockit.developer.interest.general.
Error Message: Illegal memory access. [54]
Exception Rec: EXCEPTION_ACCESS_VIOLATION (c0000005) at 0x0095065F - memory at 0x00740060 could not be read.
Minidump : Wrote mdmp. Size is 567MB
SafeDllMode : -1
Version : BEA JRockit(R) R27.2.0-131-78843-1.5.0_10-20070320-1457-windows-ia32
GC Mode : Garbage collection optimized for throughput
GC Strategy : Generational Parallel Mark & Sweep
: Current OC phase is: not running. YC is not running.
: GC strategy for GC 36 was genparpar
: GC strategy for GC 37 was genparpar
: GC strategy for GC 38 was genparpar
: GC strategy for GC 39 was genparpar
: GC strategy for GC 40 was genparpar
: mmHeap->data = 0x00C00000, mmHeap->top = 0x10C00000
: The nurserylist starts at 0x01BE75E8 and ends at 0x0CB52440
: mmStartCompaction = 0x00C00000, mmEndCompaction = 0x01C00000
: References are 32-bit.
CPU : Intel Pentium III/Pentium III Xeon SSE SSE2 SSE3 SSSE3 EM64T
Number CPUs : 2
Tot Phys Mem : 3451408384 (3291 MB)
OS version : Microsoft Windows XP version 5.1 Service Pack 3 (Build 2600) (32-bit)
Thread System: Windows Threads
State : JVM is running
Command Line : -Djava.library.path=E:\bea\jrockit90_150_10\bin;E:\bea\jrockit90_150_10\jre\bin;E:\bea\weblogic92\server\native\win\32;E:\bea\weblogic92\server\bin;E:\bea\weblogic92\server\native\win\32\oci920_8 -Dweblogic.management.discover=false -Dplatform.home=E:\bea\weblogic92 -Dwls.home=E:\bea\weblogic92\server -Dwli.home=E:\bea\weblogic92\integration -Dweblogic.Name=myserver -Dweblogic.management.username=weblogic -Dweblogic.management.password=weblogic -Dweblogic.ext.dirs=E:\bea\patch_weblogic901\profiles\default\sys_manifest_classpath\weblogic_patch.jar Djava.security.auth.login.config=E://workspace/Bhopal/LoginModulesConfig/ewp_loginmodules.config -Djava.naming.factory.initial.ewp.remote=weblogic.jndi.WLInitialContextFactory -Dcom.ewp.proxy.is_remote=false -Djava.naming.provider.url.ewp.remote=t3://localhost:7001 -Dweblogic.webservice.verbose=true -Dweblogic.log.Log4jLoggingEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true Xdebug -Xnoagent -Dcom.sun.management.jmxremote -Xms256m -Xmx1024m -Dsun.java.launcher=SUN_STANDARD weblogic.Server
java.home : E:\bea\jrockit90_150_10\jre
JAVA_HOME : <not set>
JAVAOPTIONS: <not set>
PATH : E:\bea\jrockit90_150_10\jre\bin;E:\oracle\product\10.2.0\client_1\bin;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\Program Files\TortoiseSVN\bin
C Heap : Good; no memory allocations have failed
StackOverFlow: 0 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
Registers (from ThreadContext: 0x4B29E378 / OS context: 0x4B29E764):
eax = 00740060 ecx = 00740060 edx = 45a45ba0 ebx = 08c953b8
esp = 4b29ea30 ebp = 00000000 esi = 4b29ea60 edi = 4b29efb4
es = 00000023 cs = 0000001b ss = 00000023 ds = 00000023
fs = 0000003b gs = 00000000
eip = 0095065f eflags = 00010206
Stack:
(* marks the word pointed to by the stack pointer)
4b29ea30: 00981099* 08c953b8 008ab310 4b29eb34 09e5c308 009810ea
4b29ea48: 4b29ead8 0098ecd2 4b29ea60 4b29ea90 48bd8960 48bd8960
4b29ea60: 00000001 45aa0278 45a45ba0 00000007 00000000 08c953b8
4b29ea78: 08512180 4b29ef60 00000000 09d56368 09d563b0 4b29efb4
Code:
(* marks the word pointed to by the instruction pointer)
0095062c: 5e5f0cc4 c35bc033 01b85e5f 5b000000 ccccccc3 0424448b
00950644: a5f06ca3 ccccc300 cccccccc 04244c8b 01a8018b e0830774
0095065c: 8bc88bfe* 40788301 44408b03 af0f0a75 c0830841 f8e08317
00950674: ccccccc3 cccccccc cccccccc 0424448b 00f4888b 158b0000
Loaded modules:
(* denotes the module causing the exception)
00400000-0040ffff E:\bea\jrockit90_150_10\bin\javaw.exe
7c900000-7c9b1fff C:\WINDOWS\system32\ntdll.dll
7c800000-7c8f5fff C:\WINDOWS\system32\kernel32.dll
7e410000-7e4a0fff C:\WINDOWS\system32\USER32.dll
77f10000-77f58fff C:\WINDOWS\system32\GDI32.dll
77dd0000-77e6afff C:\WINDOWS\system32\ADVAPI32.dll
77e70000-77f02fff C:\WINDOWS\system32\RPCRT4.dll
77fe0000-77ff0fff C:\WINDOWS\system32\Secur32.dll
77c10000-77c67fff C:\WINDOWS\system32\MSVCRT.dll
76390000-763acfff C:\WINDOWS\system32\IMM32.DLL
00820000-00a9cfff *E:\bea\jrockit90_150_10\jre\bin\jrockit\jvm.dll
76b40000-76b6cfff C:\WINDOWS\system32\WINMM.dll
71ab0000-71ac6fff C:\WINDOWS\system32\WS2_32.dll
71aa0000-71aa7fff C:\WINDOWS\system32\WS2HELP.dll
7c340000-7c395fff E:\bea\jrockit90_150_10\bin\MSVCR71.dll
5dac0000-5dac7fff C:\WINDOWS\system32\rdpsnd.dll
76360000-7636ffff C:\WINDOWS\system32\WINSTA.dll
5b860000-5b8b4fff C:\WINDOWS\system32\NETAPI32.dll
76bf0000-76bfafff C:\WINDOWS\system32\PSAPI.DLL
6d700000-6d70bfff E:\bea\jrockit90_150_10\jre\bin\verify.dll
6d370000-6d38cfff E:\bea\jrockit90_150_10\jre\bin\java.dll
6d2f0000-6d2f7fff E:\bea\jrockit90_150_10\jre\bin\hpi.dll
6d720000-6d72efff E:\bea\jrockit90_150_10\jre\bin\zip.dll
6d520000-6d527fff E:\bea\jrockit90_150_10\jre\bin\management.dll
6d530000-6d542fff E:\bea\jrockit90_150_10\jre\bin\net.dll
71a50000-71a8efff C:\WINDOWS\system32\mswsock.dll
662b0000-66307fff C:\WINDOWS\system32\hnetcfg.dll
71a90000-71a97fff C:\WINDOWS\System32\wshtcpip.dll
41c00000-41c26fff C:\WINDOWS\system32\DNSAPI.dll
41c30000-41c37fff C:\WINDOWS\System32\winrnr.dll
41c40000-41c6bfff C:\WINDOWS\system32\WLDAP32.dll
41c80000-41c85fff C:\WINDOWS\system32\rasadhlp.dll
68000000-68035fff C:\WINDOWS\system32\rsaenh.dll
769c0000-76a73fff C:\WINDOWS\system32\USERENV.dll
438b0000-438b8fff E:\bea\jrockit90_150_10\jre\bin\nio.dll
41ba0000-41ba9fff E:\bea\jrockit90_150_10\jre\bin\jmapi.dll
41bb0000-41bbdfff E:\bea\weblogic92\server\native\win\32\wlfileio2.dll
43ce0000-43cf8fff C:\WINDOWS\system32\iphlpapi.dll
43d10000-43d27fff C:\WINDOWS\system32\MPRAPI.dll
77cc0000-77cf1fff C:\WINDOWS\system32\ACTIVEDS.dll
43d30000-43d54fff C:\WINDOWS\system32\adsldpc.dll
43d60000-43d70fff C:\WINDOWS\system32\ATL.DLL
43d80000-43ebcfff C:\WINDOWS\system32\ole32.dll
43ec0000-43f4afff C:\WINDOWS\system32\OLEAUT32.dll
43f50000-43f5dfff C:\WINDOWS\system32\rtutils.dll
71bf0000-71c02fff C:\WINDOWS\system32\SAMLIB.dll
43f60000-44052fff C:\WINDOWS\system32\SETUPAPI.dll
44060000-44064fff E:\bea\weblogic92\server\native\win\32\wlntio.dll
44540000-44545fff E:\bea\jrockit90_150_10\jre\bin\rmi.dll
4d010000-4d122fff E:\bea\jrockit90_150_10\jre\bin\dbghelp.dll
"[STANDBY] ExecuteThread: '21' f" id=87 idx=0xf0 tid=4208 lastJavaFrame=0x4B29EB4C
Stack 0: start=0x4B260000, end=0x4B2A0000, guards=0x4B263000 (ok), forbidden=0x4B261000
Thread Stack Trace:
at _mmGetPossibleMovedObjectSize+15()@0x0095065F
at _refIterInit+393()@0x00981099
at _refIterInit+474()@0x009810EA
at _trProcessLocksForThread+66()@0x0098ECD2
at _javalockCouldBeLock+1047()@0x008AB417
at _javalockConvertThinToFat+42()@0x008AC13A
at RJNIjrockit_vm_Locks_convertThinLockedToFatLocked@8+15()@0x00986B1F
-- Java stack --
at jrockit/vm/Locks.convertThinLockedToFatLocked(Ljava/lang/Object;)V(Native Method)
at jrockit/vm/Locks.createMonitorAndConvert(Ljava/lang/Object;Z)Ljrockit/vm/ObjectMonitor;(Unknown Source)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:474)
at weblogic/common/CompletionRequest.getResult(CompletionRequest.java:109)
^-- Holding lock: weblogic/common/CompletionRequest@0x09E5C2A8[thin lock]
at weblogic/store/gxa/internal/GXATransactionImpl.commitStoreIO(GXATransactionImpl.java:99)
at weblogic/store/gxa/internal/GXATransactionImpl.doOperationCallbacks(GXATransactionImpl.java:215)
at weblogic/store/gxa/internal/GXAResourceImpl.commit(GXAResourceImpl.java:1448)
at weblogic/transaction/internal/XAServerResourceInfo.commit(XAServerResourceInfo.java:1333)
at weblogic/transaction/internal/XAServerResourceInfo.commit(XAServerResourceInfo.java:577)
at weblogic/transaction/internal/ServerSCInfo.startCommit(ServerSCInfo.java:514)
at weblogic/transaction/internal/ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1993)
at weblogic/transaction/internal/ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:2658)
at weblogic/transaction/internal/ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:2580)
at weblogic/transaction/internal/ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:278)
at weblogic/transaction/internal/ServerTransactionImpl.commit(ServerTransactionImpl.java:227)
at weblogic/deployment/jms/WrappedTransactionalSession.delistFromTransaction(WrappedTransactionalSession.java:258)
^-- Holding lock: weblogic/deployment/jms/PooledSession_weblogic_jms_client_JMSXASession@0x09D56368[thin lock]
at weblogic/deployment/jms/WrappedMessageProducer.send(WrappedMessageProducer.java:149)
at com/obopay/jms/helper/BaseQueueHelper.sendMessage(BaseQueueHelper.java:107)
The above is the jrockit crash dump file..
I am using the JMS Wrapper Connection Poooling provided by Weblogic. When i use Jmeter and do the load testing for around 10 users, the server gets crashed.
I doubt something is going wrong with the Weblogic JMS Connection Pooling, please help me..The problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM -
ITunes 10.2.1.1 crashes when using the visualizer
Running Win7, completely up to date, NVIDIA GeForce G210 with current drivers. When I start up the visualizer iTunes runs for a few songs and then suddenly goes silent, screen goes black, and my entire system freezes requiring a hard power-down. This started happening this week. Tried restoring to an earlier date but no help.
I can't use an application that fails. Does Apple want me to stop using iTunes?After a lot of research it seems Apple intentionally designed it this way. It's a power management issue. With iTunes 10, Apple decided to allow iTunes to "work with" the PC's power management settings, which means when the PC goes to sleep, iTunes allows it to do that. Having the visualizer going no longer keeps the system "active". And when it goes to sleep, it can't be woken up by anything other than a hard re-boot. So their intention is apparently to force Windows users to disable their security-related system sleep settings if they're to use the visualizer during extended plays. How wonderful. Apple is starting to sound more and more like the competition when it comes to user friendliness.
Maybe you are looking for
-
Adobe Media Encoder error [..\..\Src\RenderFrame.cpp-199] I'm trying to utilize Prelude to actually TRANSCODE some R3D material. Since R3D clips are spanned, Prelude can 'reassemble' them. (I don't understand why AME can't do this since Prelude use
-
How to call webservice for each record in a table using ODI
Hi I am new to ODI and Webservice. I want to invoke a scenario in ODI using web service. I hava a weblogic application server with axis 2 deployed. But I want call webservice for each record in a table For eg: "EMP" table have 50 records, for each re
-
Help with Guilloches and other things?
Heya, i've used Illustrator before for a few things, but i'm still quite new to it. Hope you can help. Ok so what im trying to do is make bank note from scratch. Dont worry, its for a college project and it'll be an entirely new design so theres no c
-
Flash9e.ocx reported as a threat... Need help
Hi, I just installed Kaspersky Internet Security 2009 on my VISTA Ultimate 32 bits SP1 laptop. After running an analysis it reported among a total of 3 files the following one as an important threat: c:\windows\System32\Macromed\Flash\Flash9e.ocx Wha
-
I have a issue with my subscribe.php i want when a email is typed in the text box to put the email in the database though it isnt going there, here is the code <?php if(isset($_POST['add'])){ require_once('mysqlCreds.php'); $email = $_POST['email'];