SharePoint FBA with Sharepoint list

We have been searching for a good tutorial in setting up SharePoint FBA using a SharePoint list as the authentication source but there is very little out there. CodePlex has a project called SPListMP but we were not successful in getting it to run properly. The project is still in Alpha stages.
Can anyone point me towards ource to configure SharePoint FBA to use a SharePoint list. Also, are there any cons out there that anyone can provide as why there configuration should be avoided.
Thanks.

Is that sharepoint list present in some other web application which is windows based authentication?

Similar Messages

Can't open sharepoint site with sharepoint designer 2010

Hi there,
We've installed SP Foundation + SP Server 2010 and set up some sites.
when we tried to open it with SP Designer 2010, it fails and gave us some errors.
opening SPD through site actions :
unable to open website. possible causes:
1. the web server may not have sharepoint server installed
2. the web server may be temporarily out of service
3. if you are connecting through a proxy server, the proxy settings may be incorrect
4. an error may have occured in the web server
opening sharepoint site through SPD:
the folder 'http://mysp.domain.com/site/default.aspx' isn't accessible. the folder may be located in an unavailable location, protected with a password, or the filename contains a / or \.
the thing is ... we have no problem with sharepoint designer 2007.
any idea?

Hi p.andrew,
If you want to open the site use SPD, you should enable the Client Integration for the web application at first.
Here are the steps:
1.
Go to this location : “Central administration” > “Security” > “Specify authentication provider”;
2.
Select the Web Application which you want to edit use SPD (SharePoint Designer 2010), and click the “Default” below the ‘Zone’;
3.
Select the “Yes” radio button
in the Client Integration section, and click the ‘Save’ Button;
4.
Close and re-Open the IE;
5.
Try to Open the site using SPD.
More information about this:
http://snahta.blogspot.com/2009/01/folder-may-be-located-in-unavailable.html
http://skurocks.wordpress.com/2009/06/26/enable-client-integration-user-permissions-for-web-application-%E2%80%93-caution/

This list is too long to be synchronized with SharePoint WorkSpace

Hello,
I Have a List with 30500 items in Sharepoint Site Collections.When I synchronise this Lists using on SharePoint Workspace I get this message " This list is too long to be synchronized with SharePoint WorkSpace".
Someone Can help me.
Best regards,
Fidele

SharePoint Workspace has a maximum limit on lists of 30,000 items. The only way to sync the list you are trying to sync is reduce the number of items in the list. You can see the limit documented here:
https://support.office.microsoft.com/en-us/article/Synchronize-SharePoint-content-with-SharePoint-Workspace-752f639f-8532-4923-888a-284cfc79337e?CorrelationId=fb3297d1-5572-4da7-b97b-81c42308baa2&ui=en-US&rs=en-US&ad=US#__toc263166752
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Sync to SharePoint Workspace with Calculated columns

I have a document library (in a SharePoint 2010 site) with a calculated column that will not Sync to the SharePoint Workspace 2010. Once I remove the calculated column, it syncs fine.
The calculated column displays an image in the document library depending on the state:
="<center>"&IF(State="Not Started","<img src='http://rcssportal.co.riverside.ca.us/sites/teammate/PublishingImages/NotStartedIcon.png' border='0'/>",IF(State="In Progress","<img src='http://rcssportal.co.riverside.ca.us/sites/teammate/PublishingImages/InProgressIcon.png'
border='0'/>",IF(State="Prepared","<img src='http://rcssportal.co.riverside.ca.us/sites/teammate/PublishingImages/PreparedIcon.png' border='0'/>",IF(State="Reviewed","<img src='http://rcssportal.co.riverside.ca.us/sites/teammate/PublishingImages/ReviewedIcon.png'
border='0'/>",IF(State="Edited Since Reviewed","<img src='http://rcssportal.co.riverside.ca.us/sites/teammate/PublishingImages/EditedSinceReviewIcon.png' border='0'/>",IF(State="Conflict","<img src='http://rcssportal.co.riverside.ca.us/sites/teammate/PublishingImages/ConflictIcon.png'
border='0'/>","")))&"</center>")))

Hello Thomas,
Maybe you are experiencing this issue:
http://office.microsoft.com/en-us/sharepoint-workspace-help/why-is-this-sharepoint-list-not-synchronizing-all-item-fields-or-view-updates-HA010388327.aspx?CTT=1
As far as I know it is not a limitation of SharePoint Workspace 2010:
http://office.microsoft.com/en-us/sharepoint-foundation-help/synchronize-sharepoint-content-with-sharepoint-workspace-HA101854201.aspx#_Toc263166752
- Dennis | Netherlands | Blog |
Twitter

Unable to open Sharepoint site with Designer "Folder name is not valid"

Hi all,
I'm using SharePoint 2013 with SharePoint Designer 2013, but currently I'm facing a weird behaviour.
I can open my preproduction SharePoint portal with SharePoint Designer 2013, but when I'm trying to open my production environment, I'm receiving the error "The folder name is not valid". Even it doesn't ask for credentials.
Anyone knows what is happening?

There are few other options people used to solve this issue. refer to the following posts if you haven't so far. hope it helps.
http://hightechdave.com/sharepoint-designer-the-folder-name-is-not-valid-error/
http://mesiag.blogspot.com/2011/10/sharepoint-designer-2010-folder-name-is.html
http://community.office365.com/en-us/f/154/t/11825.aspx
Cheers,

How to pass credentials/saml token access sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication

How to pass credentials/saml token exchange to the sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication
Identity provider here is Oracle identity provider
harika kakkireni

Hi,
The following materials for your reference:
Consuming List.asmx on a claims based sharepoint site
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f965c1ee-4017-4066-ad0f-a4f56cd0e8da/consuming-listasmx-on-a-claims-based-sharepoint-site?forum=sharepointcustomizationprevious
Sharepoint Claims based authentication and Single Sign on
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2dfc1fdc-abc0-4fad-a414-302f52c1178b/sharepoint-claims-based-authentication-and-single-sign-on?forum=sharepointadminprevious
Sharepoint Claim Based Authentication Web Service issuehttp://social.msdn.microsoft.com/Forums/office/en-US/dd4cc581-863c-439f-938f-948809dd18db/sharepoint-claim-based-authentication-web-service-issue?forum=sharepointgeneralprevious
Best Regards
Dennis Guo
TechNet Community Support

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Excel Services with SharePoint List Data in SharePoint 2013 - Chart is not refreshing automatically

Hi Everyone,
This is My req: I m going to display pie chart and Bar chart in share point 2013.
Steps I have follwed:
1. Export the list to excel.
2.Using the Power Pivot table I have done the chart.
3. Uploaded into document Library.
4. Added into the web part.
Chart are displaying. But When ever user added the data into the list chart is refreshing.
Is there any option to refresh the data in chart? Waiting for valuable replies.
Regards, Manoj Prabakar

SharePoint lists as data sources in Excel Services is not supported.That's the reason refreshing is not working. There are some work around you can use -
Export as Data Feed - Export your SharePoint list as Data Feed , use this data feed to a PowerPivot for Excel workbook and publish this PowerPivot using Excel Services.
User-defined functions - write UDF in C# and extend the Excel Services functionality to work with SharePoint lists.
https://msdn.microsoft.com/library/bb267252(office.12).aspx#Office2007ExcelServicesUnlimited_SharePointLists
Web Services API -
The Web Services API can be used to push data from a database and then refresh the data in a SharePoint Server list by using Excel Services.
JavaScript Object Model - The JavaScript Object Model for Excel Services in Microsoft SharePoint Server 2010 provides many solutions for Excel Services.
More details -
https://technet.microsoft.com/en-us/library/gg576960.aspx
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Need to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.

Hi All
I have one sharepoint list with huge data i.e with 20columns and more than 200 records with the fields .
Suppose lets consider there are A,B,C,D,E,F,G,H columns.
Now i want to create one form with the fields A,C,E.
When the user enter the existing data of list for columns A,C..based on C value the E column value should change and update that particular item in the list.
Please guide me without visual web part can we acheive this by Sharepoint designer 2013 or what would be the preferable solution.
Please help me on this as it is very urgent from me..
Thanks in Advance
Sowjanya G

Hi,
According to your post, my understanding is that you wanted to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.
I recommend to create workflow associated to the list and then start the workflow automatically when an item is changed.
In the workflow, you can add condition and actions as below:
If current item: C equal to Test1
Set E to Test2
Then the value of the filed E will be changed based on the value of the filed C.
In addition, if you create the form using InfoPath, you can add rule to the filed C as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to add SharePoint 2013 Promoted link list view web part in page programatically with Tiles view using CSOM.

How to add SharePoint 2013 Promoted link list view web part in page programatically with Tiles view using CSOM. I found that it can be
done by using XsltListViewWebPart class but how can I use this one by using shraepoint client api.
shiv

Nice, can you point me to the solution please ?
I'm trying to do this but I get an error :
Web Part Error: Cannot complete this action. Please try again. Correlation ID: blablabla
StackTrace: at Microsoft.SharePoint.SPViewCollection.EnsureViewSchema(Boolean fullBlownSchema, Boolean bNeedInitallViews) at Microsoft.SharePoint.SPList.GetView(Guid viewGuid)
All help really appreciated.

SSRS reporting with sharepoint list using Distinct and Multivalue parameters

i want create ssrs report with sharepoint list using ms-vs(2008). i want create Distinct multivalue parameters by using CAML query. There is any way we put CAML query where we use Distinct keyword and IN clause in CAML query... i hope all experts will
understand my poor English... sorry for poor English.. plz help me

Hi AsifMehmood,
Per my understanding you have create an SSRS report with SharePoint list, now you don’t know to create the distinct parameters by using CAML query, right?
For the CAML language doesn’t have any reserved word (or tag) to set this particular filter to remove duplicate results, but we can use the custom code to do this function. I have tested on my local environment and we can do that by create one hidden parameter(Param1)
to get all the values from the fields which will add the filter and then create another parameter(Param2) to get the distinct values based on the Param1, we use the custom code to do the deduplication.
Step by Steps information in below thread for your reference to create the parameters and the custom code:
"How to get distinct values of sharepoint column using SSRS"
Other similar thread for your reference:
https://audministrator.wordpress.com/2014/02/17/sharepoint-list-add-distinct-parameter-value/
If your problem still exists, please feel free to ask and also try to provide us more details information.
Regards
Vicky Liu

How to select column dynamically with sharepoint list as data source in ssrs report

Hi all,
I am creating reports from SharePoint list but i have requirements to select the column name dynamically with SharePoint list as data source. I didn't find any way of doing this..
Can anyone help me to resolve this issue..
There is no way of specifying column name dynamically here in data set query
<RSSharePointList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ListName>test list</ListName>
<ViewFields>
<FieldRef Name="ID" />
<FieldRef Name="ContentType" />
<FieldRef Name="Title" />
<FieldRef Name="Modified" />
<FieldRef Name="Created" />
<FieldRef Name="Author" />
<FieldRef Name="Editor" />
<FieldRef Name="_UIVersionString" />
<FieldRef Name="Attachments" />
<FieldRef Name="Edit" />
<FieldRef Name="LinkTitleNoMenu" />
<FieldRef Name="LinkTitle" />
<FieldRef Name="DocIcon" />
<FieldRef Name="ItemChildCount" />
<FieldRef Name="FolderChildCount" />
<FieldRef Name="test_x0020_date" />
<FieldRef Name="title2" />
</ViewFields>
</RSSharePointList>

Hi MNRSPDev,
Sorry for the delay.
According to the current description, I understand that you want to specify column name in dataset query designer dynamically when using SharePoint list data source.
Based on my research, this is not supported by default. As a workaround, you can use XML data source. The XML content can be embedded directly within the query. This lets you use the expression capabilities within the processing engine to build queries and
data dynamically within the report. And it can be used for retrieving XML data directly from an external data source, passing it using parameters, and embedding it within the query.
Reference:
http://www.codeproject.com/Articles/56817/Dynamic-Reports-with-Reporting-Services
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Create Pie Chart and Vertical bar chart using report builder 3.0 with sharepoint custom list

Hi All,
I have a client requirement to create reports which should show the graphical representation of SharePoint Custom List data. The reports are Month wise and YTD. Also i have to create dashboard.
For creating reports, i have heard about Report Builder and SSRS. I have SQL server 2008r2 and installed report builder 3.0 but i am not aware of creating reports(KPI, Pie Chart, Vertical bar, etc.,) with sharepoint customlist.
Can some one please help me on this.
MercuryMan

Here is some information about using the SharePoint List Data source with SSRS/Report Builder/BIDS:
http://www.infotoad.com/blog/post/2012/10/11/using-a-sharepoint-list-connection-type-as-a-data-source-for-reporting-services.aspx
http://technet.microsoft.com/en-us/library/ee633650.aspx
http://www.codeproject.com/Articles/24469/SQL-Reporting-Services-data-from-SharePoint-lists
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unable to sync with SharePoint task list

Unable to sync with SharePoint task list
The SharePoint site is invalid - I can hit the site just fine through IE
- The SharePoint site is unavailable. Not so since I can naviagte to it just fine with IE
- The user does not have full or design permissions in the SharePoint site -- My permission level is "Full Control"
All inside a corporate Lan. This is a first time setup? Any ideas?

Hi
If you open up the project file from within the sharepoint list and then click sync what happens?

SharePoint FBA with Sharepoint list

Similar Messages

Maybe you are looking for