Sharepoint foundation 2010 integrate it with ssrs

hello,
I am integrating sql server and sharepoint foundation 2010 server both are installed in different pc,
First i have installed sql server in machine 1 ,
second i installed sharepoint foundation 2010 in machine 2
with complete mode,
third i installed sharepoint foundation 2010 in
machine 1 for minimal installation with complete mode,
and integrated ssrs.
Its working fine.
But i need to know whether we can install sharepoint foundation 2010 standalone mode in
machine 1 which is a sql server.
I hope this topic might be help full to many people's.
thanks
regards
krishnakumar

Hi krishnakumar,
The Short Answer: YES
The Long Answer: The report server instance cannot use the SQL Server Express Edition for its database. However, the SQL Server Express Edition instance that is installed by the SharePoint product or technology can exist side-by-side with other Database
Engine editions that you might also install. For more information about edition requirements for the report server database, see
Creating a Report Server Database.
Reference:
http://technet.microsoft.com/en-us/library/bb677368(v=sql.105).aspx
Cheers,
-Ivan

Similar Messages

Sharepoint Foundation 2010 compatibility with SQL Server 2014

Due to a requirement to use Sharepoint without Active Directory access. I am trying to find explicit confirmation whether Sharepoint Foundation 2010 is compatible with SQL Server 2014. I have seen that Sharepoint Server 2010 and 2013 are compatible
with SQL Server 2014 as of CU 1 (released in April). But there is no mention of Sharepoint Foundation.
This chart is great except it doesn't mention whether the Foundation versions are supported.
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Thanks.

Note that that is for the Reporting Services component, but not necessarily for the SQL Database Engine component (which comes from the SharePoint Product Group, rather than the SQL Product Group). I haven't seen any confirmation that SharePoint 2010 is
supported at all with SQL 2014 as a Database Engine.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint Foundation 2010 and SSRS

Hi I have one small problem with Sharepoint Foundation 2010 and SSRS Integrated mode.
We have one installation with frontend and backend server, backend is installed on SSRS server and Kerberos authentication is enabled.
There are no problem to view reports with webparts but when you make one automatic subscription to make Report PDF files in one file share, it makes 5 och 30 files.
I can only find this in log files:
w3wp!library!18!01/26/2015-19:20:33:: i INFO: Skipped creating a dump file for the error InternalCatalogException, because a dump with the identical stack trace (with signature 1778776910) was already created.
w3wp!library!18!01/26/2015-19:20:33:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: Unhandled exception in timer Database version check, Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
An internal error occurred on the report server. See the error log for more details. ---> System.InvalidCastException: Unable to cast object of type 'System.DBNull' to type 'System.String'.
at Microsoft.ReportingServices.Library.ConnectionManager.GetDBVersion(Boolean rethrow)
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage(VersionVerificationOptions option)
at Microsoft.ReportingServices.Library.DatabaseVersionCheckTimer.DoTimerAction()
at Microsoft.ReportingServices.Diagnostics.TimerActionBase.TimerAction(Object unused)
--- End of inner exception stack trace ---;
Any ideas?

Hi Dalibor,
Based on your description, my understanding is that the error occurred when automatically making Report PDF files.
Could you please provide the version of SQL server in your environment?
If you are using SQL server 2012, I recommend to update the SQL server with SP1 and CU7 to see if the issue still occurs.
And please also re-configure the Reporting Service Application and then check the results:
https://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
https://msdn.microsoft.com/en-us/library/gg492276(v=sql.110).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Issue with SharePoint foundation 2010 to use Claims Based Auth with Certificate authentication method with ADFS 2.0

I would love some help with this issue. I have configured my SharePoint foundation 2010 site to use Claims Based Auth with Certificate authentication method with ADFS 2.0 I have a test account set up with lab.acme.com to use the ACS.
When I log into my site using Windows Auth, everything is great. However when I log in and select my ACS token issuer, I get sent, to the logon page of the ADFS, after selected the ADFS method. My browser prompt me which Certificate identity I want
to use to log in and after 3-5 second
and return me the logon page with error message “Authentication failed”
I base my setup on the technet article
http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
I validated than all my certificate are valid and able to retrieve the crl
I got in eventlog id 300
The Federation Service failed to issue a token as a result of an error during processing of the WS-Trust request.
Request type: http://schemas.xmlsoap.org/ws/2005/02/trust/RST/Issue
Additional Data
Exception details:
Microsoft.IdentityModel.SecurityTokenService.FailedAuthenticationException: MSIS3019: Authentication failed. ---> System.IdentityModel.Tokens.SecurityTokenValidationException:
ID4070: The X.509 certificate 'CN=Me, OU=People, O=Acme., C=COM' chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed
correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
--- End of inner exception stack trace ---
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.BeginGetScope(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.BeginIssue(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.DispatchRequestAsyncResult..ctor(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginDispatchRequest(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.ProcessCoreAsyncResult..ctor(WSTrustServiceContract contract, DispatchContext dispatchContext, MessageVersion messageVersion, WSTrustResponseSerializer responseSerializer, WSTrustSerializationContext
serializationContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginProcessCore(Message requestMessage, WSTrustRequestSerializer requestSerializer, WSTrustResponseSerializer responseSerializer, String requestAction, String responseAction, String
trustNamespace, AsyncCallback callback, Object state)
System.IdentityModel.Tokens.SecurityTokenValidationException: ID4070: The X.509 certificate 'CN=Me, OU=People, O=acme., C=com' chain building
failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
thx
Stef71

This is perfectly correct on my case I was not adding the root properly you must add the CA and the ADFS as well, which is twice you can see below my results.
on my case was :
PS C:\Users\administrator.domain> $root = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ad0001.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "domain.ad0001" -Certificate $root
Certificate : [Subject]
CN=domain.AD0001CA, DC=domain, DC=com
[Issuer]
CN=domain.AD0001CA, DC=portal, DC=com
[Serial Number]
blablabla
[Not Before]
22/07/2014 11:32:05
[Not After]
22/07/2024 11:42:00
[Thumbprint]
blablabla
Name : domain.ad0001
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : domain.ad0001
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17164
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.domain> $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ADFS_Signing.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "Token Signing Cert" -Certificate $cert
Certificate : [Subject]
CN=ADFS Signing - adfs.domain
[Issuer]
CN=ADFS Signing - adfs.domain
[Serial Number]
blablabla
[Not Before]
23/07/2014 07:14:03
[Not After]
23/07/2015 07:14:03
[Thumbprint]
blablabla
Name : Token Signing Cert
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : Token Signing Cert
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17184
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.PORTAL>

Slowness Issues with Windows Authentication in SharePoint Foundation 2010 sites

All,
We are having a strange issue with SharePoint Foundation 2010 sites where sites are very slowly loading when accessed via windows based authentication where as the extended sites in forms authentication are loading normally.
There were no error logs or even SharePoint logs also except the images load time is showing with different load times.
Attached are the patches that were updated to the server that may be issue but not sure. Can some one please share your thoughts.
SQL connectivity b/w the server is good.there are no n/w issues except that the users are using the sites with a different domain other than the domain in which the servers were hosted.
There is a trust b/w the two domains.This was never changed and there were no issues in the last 2 years.
Thanks keshav,Share point Developer

we do have trusted domains
Inder : It would be better if you run that command again now.
Inder: How many AD server do you have
Inder: Do you notice the login request go to nearest AD server.
and https sites. Please share your thoughts.
Inder: All the certificate have intermedite certificates. You need to logon to each SP server, and install
these certificates on trusted root authority
If this helped you resolve your issue, please mark it Answered

Windows 2012 to Windows 2012 R2 Inplace with Sharepoint Foundation 2010 SP2 (4.0.7116.5000)

I found than Inplace update from 2012 to 2012 R2 are supported. I also found 2012 R2 will support SharePoint Foudation 2010 with SP2 (4.0.7116.5000).
But I cannot find if we perform an Inplace update from a Windows 2012 Server running SharePoint 2010 (Sp2) to R2 will be successful.
As anyone done that?
Thanks.
Real
Réal Doré

Hi ,
On Windows Server 2012 R2, Microsoft supports only the SharePoint Server 2010 SP2 slipstream media configuration and not the RTM version of that configuration. For full SharePoint functionality and support, you must have the February 2014 cumulative update
(CU) or a later CU installed.
Additionally, only a new SharePoint Server 2010 SP2 slipstream installation that has the February 2014 CU or a later CU installed is supported on Windows Server 2012 R2. Microsoft
does not support a Windows in-place upgrade for this scenario.
For your scenario, I suggest you create a new SharePoint Foundation 2010 with SP2 on Windows Server 2012 R2, then migrate the content to new SharePoint 2010.
More information, please refer to the link:
http://support.microsoft.com/kb/2724471/en-us
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

How do I set up OCR on PDF's to integrate into Sharepoint Foundation 2010 on my SBS2011 Server?

I'm going to give an overview of my situation, and what I need to accomplish as a final goal.
I am administering a small network for a local firm. We are running Windows Small Business Server 2011 (Windows Server 2008 R2, and Sharepoint Foundation 2010) and 6 new Windows 7 workstations. We have a network copier installed in a central
location, which is the only place we get incoming scans. When we scan, we currently choose which desktop is our destination, and each user retrieves their scans independently, and does as they wish. Each workstation also receives PDF's through
email.
We need a solution which would allow us to use our scanner and send to a single location for all incoming scans. Then have that location OCR the scans into readable PDF's, and have those PDF's transferred to a folder on our Sharepoint Server.
We also need the same ability from incoming emails, or any existing PDF's we have.
This needs to be an extremely user friendly role on the client side, being as the users are not computer literate. If there is a button in outlook that says Send to sharepoint, and it automatically sends them to the OCR server, which forwards them
into Sharepoint that is perfect.
Our current server (i7-2700k, 32gb ram) is already slow with everybody on sharepoint and using the library. If there is software that can install on it and be directed to run the batch in the off hours, we can use the existing server, otherwise
I believe we will need an OCR scanner, being as the processes are CPU intensive.
Thoughts, ideas, what do I do?!... Our budget is less than $4000 and Windows Server skill level is 5/10. 1/10 being a complete n00b, 5/10 being as I got this thing setup entirely having never done it before, knowing only what I know from years of being
a PC repair tech. For this reason, I prefer an option with a company supporting it.

Hi,
Maybe a 'little' too late, but you could use Udocx
for this. With this application you get the same buttons to scan to SharePoint folders on the scanner and the pc, making it very user friendly.
Processing the scans/emails/documents to searchable PDF files is done in the cloud. This makes the documents accessible almost instantly, instead of having to wait till the off hours. There's no need to install software, and our solution is easily within
your budget. Furthermore, you can benefit from our in-house support.
Take a look at the Udocx website: www.udocx.com
Cheers
Iris
Iris vH

Issues with Office Documents in Sharepoint Foundations 2010

We recently upgraded to Sharepoint Foundations 2010 from Sharepoint V3.0. When I did the install of Sharepoint Foundations 2010, there was no mention of Office Web Apps in the Technet article. Now when our users try to open a document from Sharepoint,
then make changes and try to save back by just clicking on the "Save" button, they get an error stating that the upload failed or that the document is open in "Read Only". After searching for a month for an answer, I believe I need
to install Office Web Apps for Sharepoint but have yet to find an article that explains how to do it. I've found the articles on 2013 but not 2010. The article on 2013 asks that I do things in the Sharepoint Foundations server but when I follow
them, the options are not there. If anyone has any experience adding in the Office Web Apps to Sharepoint, I would sure appreciate some assistance.

Hello,
You should ask on the
SharePoint forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Sharepoint Foundation 2010 SP2 or SharePoint Foundation 2013

Experts,
I am installing FIM 2010 R2 SP1 on windows 2012.
FIM Sync installed on server1.
FIM Service installed on server2.
Now I have to install:-
FIM Portal on server3.
With googling I understand that I need SharePoint Foundation 2013 or SharePoint Foundation 2010 SP2.
Can anyone guide what would be the safe approach. I don't have any knowledge of SharePoint.
Please suggest.
Thanks,
Mann

Considering you would use it for FIM only, it doesn't really matter which version would you pick.
If you want to implement FIM on Windows Server 2012 (or R2), just make sure that you install correct version of SharePoint (at least 2010 SP2)
Keep trying If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Sharepoint foundation 2010 externel https access problems

I have a very strange problem with my sharepoint foundation 2010 site.
I have a site which is accessible from outside on https (we have a valid certificate). I configured IIS for http and https.
Also I configured internal and externel access for this site on sharepoint.
But sometimes, the site is not accessible from outside on https with (externe.site.fr), BUT it will be accessible with public ip !!!
And also accessible from inside. (with interne.intranet.site.fr)
Any Idea ?
thanks

Hi,
According to your post, my understanding is that your site is not accessible from outside using external host name with https sometimes.
As your site can be accessible with public IP, however it can’t be accessible from outside using external host name with https sometimes, the issue could be caused by the gateway server in your environment.
I suggest that you need to check the gateway server configuration.
For more information, you can refer to:
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2012/12/05/how-to-set-up-microsoft-forefront-unified-access-gateway-environment-for-sharepoint-2013.aspx
http://nhutcmos.wordpress.com/2013/07/26/configure-ssl-certificate-for-sharepoint-external-https-access/
http://sharepointdotnetwiki.iblogger.org/2009/12/dns-setup-in-sharepoint/
http://underthehood.ironworks.com/2010/06/making-a-sharepoint-2010-site-externally-available-alternate-access-mappings-host-header-bindings.html
Best Regards,
Yumi Fu

SharePoint Foundation 2010 Workspace problem

I've installed sharepoint foundation 2010 in a Windows server 2008 R2 standard environment. I've added some site collections and added some libraries to the site pages. Ive put in various permissions and groups and tested no problem using
Sharepoint workspace 2010 on a Windows 7 32 bit client.
But when I do a remote desktop connection to another server with 2008 R2 standard installed I can't get Sharepoint workspace 2010 to work properly. It opens an account and connects to my sharepont site but in the pane to the right where I would normally
see library documents listed all that comes up is an error stating - Error: Cannot Display Tool.
Also if I try to sync I get the following error:-
The parameter is incorrect
HResult: 0x80070057 (0x386d7565)
Process: Groove.exe (ID:17936(0x00004610))
No amount of googling has found a solution, no similar postings had any resolutions.
Any help would be much appreciated

My apologies. I'd focused on the error and hadn't adequately read the information you provided on the environment. The issue is probably with using SharePoint Workspace on the remote computer, not with SharePoint Foundation.
Here is what I understand you to be doing:
You use Remote Desktop to connect to the Windows Server 2008 R2 computer, where you log in with your domain account, which is a member of the local Users group.
On the remote computer, you start SharePoint Workspace.
On the Launchbar, you click New, click SharePoint Workspace, select your site, and then click
OK.
The workspace is created and appears (from the progress bar) to download content.
When you click Open Workspace, no content is displayed. Instead, you see the "Cannot Display Tool" error.
Is that correct?
There are three areas where SharePoint Workspace is complicated to run remotely:
Where SharePoint Workspace will be run by a user other than the one installing it, it must not be lauched during the installation. This seems the most likely to be the issue, as we have seen the same failure and error at a customer site where several
users had been given a computer image created on a computer where SharePoint Workspace had been launched before image creation.
Only one user should run SharePoint Workspace (Groove.exe) at a time. (Sometimes multiple instances work, but it's not reliable.)
You need to have a local profile on the computer which is running SharePoint Workspace. SharePoint Workspace is not supported with Roaming or Temporary profiles. Usually, this problem would prevent you from starting SharePoint Workspace, but some
environments with custom permissions can lead to other errors.
SharePoint Workspace uses the current user's permissions for SharePoint server access, In the case of Forms-Based authentication, it prompts for credentials at workspace creation, but then uses the credentials in the active browser session when opening
the workspace. I think this could only be related to your problem if you are logged in as another user in your browser, and that user has access to some, but not all, of the site your workspace connects to.

SharePoint Foundation 2010: search error: "Your search cannot be completed because of a service error."

Hi,
I have SharePoint Foundation 2010 running on a single server with databases, with a second server in the farm serving as a 2nd app tier. Both server have the exact same versions of SharePoint loaded (according to the Central Admin site).
Whenever I try to run a search from any site in my SharePoint Foundation 2010 installation (in this example I typed "this is my query"), it hangs for 20-30 seconds while the IE status bar says:
Waiting for http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2Ftfs2010db%2Ftfs%2FSITE1
Then it finally returns a results screen with an error that says: "Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information."
Checking the SharePoint logs under C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS, the relevant entries say the following (items I deem important
bolded):
11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (HEAD:http://172.22.100.101:80/)) 11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Logging
Correlation Data xmnv Medium Name=Request (HEAD:http://172.22.100.101:80/) a7ab70a3-61bd-4d62-b5a4-cf77a45dafb9
11/05/2011 18:22:25.88 w3wp.exe (0x35F0) 0x1908 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (HEAD:http://172.22.100.101:80/)). Execution Time=3.33645756653429 a7ab70a3-61bd-4d62-b5a4-cf77a45dafb9
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1))
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)
fea6cc87-0404-497a-838e-5e154f422aa4
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)).
Execution Time=4.3055751499143 fea6cc87-0404-497a-838e-5e154f422aa4
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1))
11/05/2011 18:22:50.73 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.75 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/tfs/SITE1 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.77 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Query dn6r High FetchDataFromURL start at(outside if): 1 param: start 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.79 mssearch.exe (0x58A4) 0x2534 SharePoint Foundation Search QueryComponentSelection aee7 Medium
Did You Mean Suggester not found. [smart2.hxx:382] d:\office\source\otools\inc\search\common\ytrip\tripoli\smart2.hxx 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:22:50.91 mssearch.exe (0x58A4) 0x2534 SharePoint Foundation Search Query Processor e0pg Medium 1dd958fb-b605-4b3b-a676-28a3cafb2eb6:
Query completed 125 ms, detailed time: Query stage execution ms times: 0 125 0 0 125 0 0 0 Query stage cpu ms times: 0 31 0 0 31 0 0 0 Query stage hit counts: 1 1 1 7 1 0 1 1 Cursor count: 260 Mapped page count: 164 Total index count: 7 [srequest.cxx:5526]
d:\office\source\search\native\ytrip\tripoli\cifrmwrk\srequest.cxx 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Exceptions 1hjo
Medium Exception thrown: 0x80040e31 (d:\office\source\otools\inc\search\common\ytrip\tripoli\timeout.hxx:51 ip 0x000007FEECF099B7) 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search
Query Processor e2o1 High In CRootQuerySpec::Execute - caught exception: 0x80040e31, translated to: 0x80040e31 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Search Administration 0000
High Log Query: More Information: Execution stopped because a resource limit was reached. No results were returned.
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a1
High Error while executing web part: Microsoft.SharePoint.Search.WebControls.Srhdc GenericException: Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information.
---> System.ServiceProcess.TimeoutException: System error. at Microsoft.SharePoint.Search.Query.KeywordQueryInternal.Execute() at Microsoft.SharePoint.Search.Query.QueryInternal.Execute(QueryProperties properties) at Microsoft.SharePoint.Search.Query.Query.Execute()
at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.GetResultData() --- End of inner exception stack trace --- at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.get_ResultsReturned() at Microsoft.SharePoint.Search.Internal.WebControls.CoreRes...
5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08* w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a1 High ...ultsWebPart.ModifyXsltArgumentList(ArgumentClassWrapper argList) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean
bDeferExecuteTransform) 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Web Parts 89a2
High InnerException 1: System.ServiceProcess.TimeoutException: System error. at Microsoft.SharePoint.Search.Query.KeywordQueryInternal.Execute() at Microsoft.SharePoint.Search.Query.QueryInternal.Execute(QueryProperties properties) at Microsoft.SharePoint.Search.Query.Query.Execute()
at Microsoft.SharePoint.Search.WebControls.SearchResultHiddenObject.GetResultData() 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.08 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (DataBinding DataFormWebPart ()). Execution Time=15302.2074034549 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.09 w3wp.exe (0x35F0) 0x3148 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://SERVER2010:80/tfs/SITE1/_layouts/searchresults.aspx?k=this%20is%20my%20query&u=http%3A%2F%2FSERVER2010%2Ftfs%2FSITE1)).
Execution Time=15358.1002613461 5e283c89-990f-4572-ae77-a1e6a5aad502
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png))
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png) f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af71 Medium HTTP Request method: GET f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af75 Medium Overridden HTTP request method: GET f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.59 w3wp.exe (0x35F0) 0x5C6C SharePoint Foundation General af74 Medium HTTP request URL: /tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png f0d03f8e-d78b-4004-9a5f-3ee9955afa60
11/05/2011 18:23:06.60 w3wp.exe (0x35F0) 0x58E0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://SERVER2010:80/tfs/SITE1/Shared%20Documents/SITE1_logo_sharepoint.png)). Execution Time=9.75459171486879 f0d03f8e-d78b-4004-9a5f-3ee9955afa60
Not sure what "resource limit is reached" actually means. This SharePoint installation is running under regular SQL 2008 R2, and the
WSS_Content database is fairly small (10gig). I've reviewed the Search Service, the process account running it, the
WSS_SEARCH index database, and verified that the Content database is using the proper index database. Everything looks like it should be crawling/indexing/working fine. But the WSS_SEARCH
database isn't very large, so I'm not sure if the crawling is actually filling it with anything.
Not sure where to start seriously troubleshooting this. Any advice would be appreciated. Thanks.

Hi,
The query ran in tens of seconds. This indicates that at some point a bad plan compiled and stayed in the cache.
It may have gotten there because the statistics were out of date.
A possible way to keep this from happening is to rebuild statistics with full scan more frequently.
Try free the proc cache and see the result.
http://msdn.microsoft.com/en-us/library/ms174283(v=SQL.105).aspx
Thanks,
Rock Wang
Regards, Rock Wang Microsoft Online Community Support

Sharepoint Foundation 2010 install fails on Windows 2012 R2 server

Microsoft kb article at https://support.microsoft.com/kb/2724471/ is saying we need to use the Sharepoint install CD that includes SP2 in order for installation to succeed. Where can we download Sharepoint Foundation 2010 SP2 slipstream install image
so that we can be compatible with install on a Win2012 R2 server? Can you provide a link. Technet download page only has the Sharepoint install and the SP2 install separately. Thank you.

You can download it from here:
https://www.microsoft.com/en-us/download/details.aspx?id=24983
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint foundation 2010 on Windows Server 2012 R2

Hello,
I have done an in place upgrade of my Windows 2008 R2 enterprise server (running Sharepoint Foundation 2010) to Windows 2012 R2 standard (for license reason). I have applied the latest service pack 2 and hotfix (14.0.7113.5000) to sharepoint . When
I want to open the SharePoint 2010 Management Shell I am getting "The Local farm is not accessible. Cmdlets with FeatureDependencyId are not registered". I have tried different thing (like setting up a config file for powershell to load version 2,
or running PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures ) without success.
I am currently unable to make a backup of the farm.
If someone would have an idea, that would help me a lot.
Thanks
PS: I am able to open The Sharepoint Central Administration, and the farm is working.

Try this, run cmd.exe "As Administrator".
powershell -version 2.0
Add-PSSnapin Microsoft.SharePoint.PowerShell
Does that work?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint Foundation 2010 : Changing language settings

My employer would like to offer our clients the ability to specify a preferred language in-which to use our SharePoint solution.
I.e. Clicking on a national flag on the dashboard will consequently display the system text within the associated language.
Ideally this feature will be bespoke to each given user. I.e. Default language will be English. Each user thereafter will be able to specify their unique user session within their desired language.
Is it possible to configure our solution to offer this feature? If so, how?
We are currently using SharePoint Foundation 2010.
Many thanks in advance.
David
Senninha010

The ability to display prompts in a different language in SharePoint 2013 is called the
Multiple Language User Interface (MUI). The issue with what you are attempting is not building an interface to enable or disable a specific language in the MUI. The problem is that the available languages are completely dependent on whether
a SharePoint Language pack for that language has been loaded or not. If they have been loaded then its just a matter of writing your application to take advantage of Localization support through the use of resource files. But localizing your application
without loading the SharePoint language pack for that language probably won't work well. here's a couple articles on the MUI and localization.
http://office.microsoft.com/en-us/sharepoint-server-help/introduction-to-multilingual-features-HA101867790.aspx
http://msdn.microsoft.com/en-us/library/office/fp179919(v=office.15).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Sharepoint foundation 2010 integrate it with ssrs

Similar Messages

Maybe you are looking for