SharePoint Learning Kit (SLK) Permissions Error
Firstly I am new to SharePoint support so apologise if I am re-treading old ground.
We are using SharePoint Foundation 2010 and SLK 1.5.2.
When accessing the “E-Leaning Actions”, “Assign To Site” or “Assing To Self” menu options I get “Error: Access Denied”, “You are currently signed in as : XXXX”,“Sign in as a different user”.
The user has the SLK Instructor permission and I have confirmed the site has been configured with the default SLK permission names.
In the event viewer I can see the following error:
SharePoint Learning Kit Error
System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Ojbect stateInfo)
at System.Web.HttpResponse.End()
at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRediredFlags flags, HttpContext context, String queryString)
at Microsoft.SharePoint.Utilities.SPUtility.RedirectAccessDeniedPage(HttpContext context)
at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(HttpContext context)
at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex)
at Microsoft.SharePoint.Library.SPRequest.GetFileVersion(String bstrWebUrl, String bstrFileUrl, Byte level, Object& pvarVersions, UINT32& pdwcVersions)
at Microsoft.SharePoint.SPVileVersionCollection.GetFileVersions()
at Microsoft.SharePoint.SPVileVersionCollection.get_Count()
at Microsoft.LearningComponents.SharePoint.SharePointFileLocation.getTimeStamp(Guid siteId, Guid, webId, Guid fileId, Int32 versionId)
at Microsoft.LearningComponents.SharePoint..ctor(SPWeb web, Guid fileId, Int32 versionId)
at Microsoft.SharePointLearningKit.ApplicationPages.ActionPage.LoadSlkObjects()
at Microsoft.SharePointLearningKit.ApplicationPages. ActionPage.get_NonELearning()
at Microsoft.SharePointLearningKit.ApplicationPages. ActionPage.OnPreRender(EventArgs e)
Any help or suggestions gratefully received.
I would post this over at https://slk.codeplex.com/discussions.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Captivate 5 and SharePoint Learning Kit (SLK)
Is anyone using Captivate with SLK? Does anyone have a good source on how SLK works?
Thank you,
SusanI would post this over at https://slk.codeplex.com/discussions.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Grading SCORM content on SharePoint with SLK (SharePoint Learning Kit)
Hi everyone,
My name is Kevin and I am currently working in a company to develop E-Learning materials to help train new hires. I am using Articulate Storyline to make quiz content and uploading the content to SharePoint with the SharePoint Learning Kit SLK. Here is some
information that you can follow and hopefully help me with configuring SLK to grade my Articulate quizzes.
First, I want to outline the progress I have currently made so that anybody can see if the problems I have are due to things I already did:
Used Articulate Storyline to make Presentations with Quiz questions in them that are graded and reviewed at the end of the Presentation
Published the Storylines to LMS in SCORM 2004 format and saved to my computer
Took each published Storyline and made .zip files
Uploaded .zip files to SharePoint 2010 with SLK (SharePoint Learning Kit). Can assign Learners with .zip files as long as they download them, extract them, and find the ‘story.swf’ flash file that runs the Presentation so they can go through the Storylines,
answer quiz questions, and receive a quiz grade at the end of them
The issue is that after downloading each .zip file, running the Presentation, and finishing the Quiz questions at the end of them, the information cannot be stored or saved and re-submitted to SLK which should then automatically read the Quiz progress and
log in a grade as well as log in completion of the assignment due to passing grades.
The questions at hand are:
How to save or store graded information from the Presentations so that they can be submitted to SLK?
How to make sure SLK takes in the graded information submitted from the Presentations automatically, store it, and reveal them?
How to make sure SLK determines assignment completion and passing assignments grade-wise?
I watched videos of how SLK grades the quiz content and I think that will work, but I think my main issue is saving that quiz content and getting to submit to SLK for grading.
Thank you for reading about my issue and any help would be greatly appreciated. If I think of other questions, I’ll let you know and if you have questions for me, feel free to ask.
Sincerely,
Kevin BanslebenHi kbans,
Thanks for your sharing!
Wendy
Wendy Li
TechNet Community Support -
Permissions Error When Exporting
Hi everybody. I was hoping someone could help. My company uses Soundtrack Pro for our audio work, and recently we have decided to set up the ability to create web-quality video/sound. So, because of this, our managers wanted a way to inventory the digital files from their pc's. We purchased a drive cataloging software and after I installed and set up Sharepoints on the macs, they were able to view the files on the mac's external drives.
But it seems after I did that, we started getting intermittent permissions errors only when exporting the finished product to the external hard drive. It said something like "cannot export file; inadequate permissions or insufficient hard drive space." I know we have enough hard drive space. Files can still be written to the drive from Soundtrack, such as if we just saved the project to it, but frequently it does not allow us to export.
Thanks Guys.I still get the error. I have disabled sharepoints, set the drive to ignore permissions, changed everything. I'm starting to think that its a hardware problem, and that error is getting kicked back because Soundtrack doesn't know what to do... idk, any help would be appreciated.
-
Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.MainHi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com -
I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?
I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message. -
Updating to iTunes 11.1 gave me a lot of disk permissions errors
I ran a Verify Disk Permissions before the installation of iTunes 11.1 and everything was clean, then I did one after installing iTunes 11.1 and I got a ton of errors. See below:
After running repair permissions several times, running from the boot drive or from an external booted, after uninstalling and doing a fresh install, nothing changed.
I also tried to repair the ACLs by booting from the Recovery partition and using resetpassword command.
I know it's not very important but I like to keep my system in perfect shape.
Come on Apple, after one single update, this is NOT SERIOUS!Same here. But without knowing for sure why Apple did let this messages appear, in short, you should consider them as not important...at least for now...and here is why for the ones interested in some details about the error:
Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AACEncoderConfig.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
What this means in Unix language is that permissions check is expecting that "AACEncoderConfig.nib" to be a directory and it's not. You can tell because of "drwxr-xr-x" the d letter at the beginning of the string means "directory" and when compared with the actual value "-rwxr-xr-x", the absence of d means that it refers to a file.
Now you might ask why is the system expecting a directory?
Here is a link that describes why: http://support.apple.com/kb/HT1452?viewlocale=en_US&locale=en_US
OK...but what is this kind of files .nib?
This files are normally GUI files...and in the past...not so far away...it was based on a directory structure...but iTunes 11.1 is the first released Apple app that is using their new nib file spec. And this is somehow apparent...I mean the error messages we are all seeing when we run the permissions check suggest it.
Then I need to add, as a guess, it looks like this is due to the coming OSX upgrade...I saw another software giving the same permissions errors and even if I cannot say which app, it's one that is heavily tested right now and it will appear on OSX Lion/Mountain Lion and the new Mavericks.
Hope this helps! -
My MB Pro is no longer syncing my iPad in iTunes. It did in the beginning, however I had to change my MB Pro password. Now I get a permissions error message trying to sync: "error storing your authorization information on this computer." Can you help?
First I would just try deleting the SCInfo folder, restart your computer, open itunes and see if you are still getting the error, at that point if you are it is a permissions error with the computer specificaly and not in itunes.
http://support.apple.com/kb/TS1389
that is for deleting the scinfo folder. scroll to the bottom of the article and the steps are there -
I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." And I have no idea of where or how to fix this issue. Any help or suggestions will be greatly appreciated. I even tried to deauthorize this computer and got the same error message. HELP!
I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message. -
Hi Guys
I have a major problem with file saving permissions
Current setup:
- 5 imac (10.6)
- 1 mac book pro (10.6)
- mac xserver
- Direct attached Raid Array
Issue:
When user "A" creates new files and folders to the shared drive on the raid array it automatically defaults to read only for all other users, and any time they try to add/delete/create files or folders in the fold user "A" created they get a permissions error. Therefor everybody else cannot edit the files
E.g. user A and user B quite often work on documents together and when user A stores it in the folder user A created then user B can only read it
has anybody come across this error before?
also i have tried changing permissions in get info as it defaults to read only soon as i change it to read and write and close the get info box it reverts back to read only ( the permissions group in called everybody)
Any help would be much appreciatedYou can try propagating the permissions on the root of the share, new files should inherit permissions from the parent folder, if that doesn't help, maybe try something with the umask
-
Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, SudheerHi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer -
Help, cannot sync completely with my ipad, and i also cannot remove or delete shared photos which are clogging up my ipad 64GB memory! Some issue with this keeps croppin gup, so frustrating:
"The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."
Not sure how we can correct his permissions problem, and whether authorising or deautorizing makes any difference, with more and more errors keep popping up, this got to be such after an update of the OS, can remember which!?
HELP!!!follow this:
Launch iTunes
select iTunes Store from the menu on the left side.
sign in via the link on the top right area if you haven't done so already
click the link where you Apple ID email appears, enter your Apple ID password, click View Account, this will take you to a page displaying detailed information about your Apple ID account.
The last item under Apple ID summary should be Computer Authorisations, click Deauthorize All
now reauthorize any computers as needed when the system prompts you.
good luck. -
I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss
how do I find the file and replace it or install it?I'll reload it tonight when I get home...basically, I bought a new iPhone and downloaded some new medical apps. also had to download an update for iTunes into my mac laptop so I could access iCloud (which was NOT on my prior iTunes software)
When I synched my new iPhone with the newly downloaded iTunes, I registered my iphone and tried to "back it up" to iCloud and the message indicating that "the required file was not found or has a permissions error...." popped up.
How do I correct the permissions error, or...am I able to do this somewhere? Or...how do I find the file that is missing?
Dr. Bob001 -
I keep getting this messae when I try to share itune to my new mac The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization -
please help me how to authorize my computer as it always say The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
Many thanks. If you're on Mac OS, let's try the following document:
iTunes: Missing folder or incorrect permissions may prevent authorization
Maybe you are looking for
-
How to put safari in full screen mode by default ?
Hello, my question is in the title... Thanks for any answer.
-
ALV GRID Export to Excel button Missing
HI All, I am facing some problem with ALV GRID. When excuting the report with my user id I am able to see the 'Export to Local file' button in the ALV GRID where as if i am excuting with another user id which is having less authorisations than the bu
-
After Software Update, asked to choose printer?
My daughter cannot troubleshoot. She install everything when prompted by Software Update, including 10.4.8. Her printer is now not working. She is finally telling me at some point she was "asked to choose a printer". She stated she did not see her pr
-
ABAP WD application - Dynamic filling adobe interactive form
Hi, I am developing a WD Application which has Adobe interactive form in which when user enters an input field 1 it should automatically populate respective values for input field 2 in the same form.I have this relation maintained in ztable. How do
-
Hi everyone. Project I'm helping develop in Flash CS3 an online soft skills training that involves students viewing a short video than answering a multiple choice question. After viewing several videos and answering the related questions the student