Sharepoint powerBi PowerQuery- Can not refresh from the browser

Hi all,
I've used powerQuery to my Excel and called to Sharepoint List using PowerQuery. Then i created a chart using using that list data. When i refresh the list (under WorkBook Queries it gives updated data).
Then i saved that spreadsheet and uploaded to sharepoint online document library. I need to refresh data from the browser too.
I could see there is Data button which has Refresh Selected Connection as an option. It gives following error once i clicked on Refresh Connection button.
'select a refreshable region, such as pivot Table before clicking on the refresh selected connection button'
Thank you

Literally nothing happens. If I move the mouse over a clip, click and hold, then drag the mouse anywhere, it's literally as if I wasn't even clicking. And yeah, I'm using the selection tool.
It's not a major problem, I'm just dealing with a project that has a lot of different clips and it's been a pretty big inconvenience.

Similar Messages

I can not purchase from the iTunes store because of the security question I am I do not know your security question and alternative mail has been hacked

I can not purchase from the iTunes store because of the security question I am I do not know your security question and alternative mail has been hacked

You need to contact Apple. Click here, phone them, and ask for the Account Security team.
(87808)

TS2446 Hi I have a problem I can not purchase from the iTunes application with the knowledge that I have dollars I hope a solution to this problem and thank you

Hi I have a problem I can not purchase from the iTunes application with the knowledge that I have dollars I hope a solution to this problem and thank you

What happens when you try to buy something ?
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it's a different problem ... ?

I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

Dear Ones,
I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanx

see if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

TA20637 I have a print job that I can not delete from the queue.

When I try it says "job is completed and can not be deleted from queue" but it seems to be stuck (and keeps reprinting rather than letting me print other documents). What do I do? I tried clearling the printer queue by turning the printer on and off but that is not dumping the cache.

So, you can't select it in the queue and Delete it the usual way...
If nothing else works, you may need to remove printer from the list in System Preferences Print & [Scan/Fax] pane. Then add it back.
And if NOTHING else works, you can also Reset printing system. This removes ALL printers from the list and resets the overall printing system. The command is in the same System Preferences pane. Right (Control) click on the list of printers and select Reset printing system. This time, you'll need to add all of your printers back.

Oracle report can not run from the form using 10gAs(release 1)

Hi
My matrix oracle report is okay from the builder but it is too slow when i call from the form.And finally it says me
[b]Network Access Message: The page cannot be displayed
Explanation: The request timed out before the page could be retrieved.
Try the following:
Refresh page: Search for the page again by clicking the Refresh button. This may have been a one-time error.
I have made the following correction
1-ENGINERESPONSETIMEOUT
2-callbackTimeOut="9000000"
3-ping timeout="600" interval="30" in opmn.xml
please help me ,any advice is important for me
Thank you
Tata

Hi
My matrix oracle report is okay from the builder but it is too slow when i call from the form.And finally it says me
[b]Network Access Message: The page cannot be displayed
Explanation: The request timed out before the page could be retrieved.
Try the following:
Refresh page: Search for the page again by clicking the Refresh button. This may have been a one-time error.
I have made the following correction
1-ENGINERESPONSETIMEOUT
2-callbackTimeOut="9000000"
3-ping timeout="600" interval="30" in opmn.xml
please help me ,any advice is important for me
Thank you
Tata

Accessing MobileMe (not email, from the browser) on Blackberry Curve

I wanted to access my .me account from my blackberry (the web page, not the email), and I got to the login page, and after entering my info and pressing login, nothing happened. I scrolled down and found the info about not working well with IE, etc., so guess the browser is an issue?
Does anyone else access their .me account on a blackberry? If so, how do you do it?
Thanks in advance!

Well, the good news is I have the URL correct.
But regardless of whether I use http://icloud.com or http://mail.icloud.com, I still get prompted with a dialog box which says the following:
"Setup iCloud on a device to use iCloud.com"
If I click "Close" I end up back up at the sign in screen and have to enter my username/password again.
If I click "Learn More", my only other choice, I end up on some sort of help page that tells me how to set up iCloud on this device. Which is precisely what I don't want to do. I just want to access a webmail page like, for example, gmail.
I don't see any "Mail" icon there.
Thanks for the reply.

I have installed a new hard drive but can not recover from the HP 2 recovery disks

My computer: HP Pavilion dv9825nr
Windows Vista Home Premiu. SP 1
My old computer (I have a new HP laptop) had a bad hard drive so I bought a new hard drive - 488599-001, as recommended by HP.
When I try to restore using the diskds I bought from HP, I get an error: 0x400110020000100A.
Windows does not recognize the hard drive and I read somewhere tghat the Vista restore disks are problematic.
I'd appreciate any help you can give me. Good timing for expert day :-)

Hi:
If you think you did something in the BIOS, just set it to its defaults, save and exit.
Here is what you need to do to make your own vista disk...
If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
I selected No, make the ISO file.
It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
When you enter the product key, it knows what version of Vista you have.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
Paul

The slide show runs in "live mode" but will not run from the browser.

Here is the link to the web page http://www.williamshomesteadranch.com/welldone.html
This is the first time that I've tried to use a widget and it looks good, but will not run fromthe browser.

The answer to the problem is very simple, the main images cannot be found. Please have a look at the following markup starting with line 305 or thereabouts:
      <ul id="ImageSlideShow" title="Jesse the Border Collie">
        <li><a href=Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg src="Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg" title="Jesse"><img src="Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg" alt="photos-1.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg src="Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg" title="Jesse and his Friend"><img src="Spry-UI-1.7/jackandjesse/jackandjesseonbeachthumbnail.jpg" alt="photos-2.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg src="Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg" title="Jesse playing soccer with his friend"><img src="Spry-UI-1.7/jackandjesse/jackjessesoccerthumbnail.jpg" alt="photos-3.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg src="Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg" title="Jesse and his Friend resting"><img src="Spry-UI-1.7/jackandjesse/jackjesserestbeachthumbnail.jpg" alt="photos-4.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg src="Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg" title="A Walk down the Beach"><img src="Spry-UI-1.7/jackandjesse/jackjessedwnbeachthumbnail.jpg" alt="photos-5.jpg" /></a></li>
      </ul>
Now take a closer look at the first image.
The thumbnail is jacksjessethumbnail.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg. Bless me, the thumnail is there. No problem here.
The main image is jacksjesse251x270.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg. Lo and behold, the image cannot be found. The problem must be here.
We can do the same analysis for each of the remaining images with the same result. This means that the main images have not been uploaded to the correct folder or that the path to the main image is incorrect.
Assuming that the path to the main image is correct, using DW, have a look in your local folder as follows
Then 1. single left click on the jackandjesse folder to highlight it, 2. click on the symchronise button, 3. make sure you have the correct selections in the Synchronize Files dialog and click on preview.
Then click on OK as per
and the files should be uploaded to the correct remote folder.
Gramps

Since i upgraded to firefox 6.0.2 my printer does not print from the browser, while it does still does print from internal docs such as word and word padword

''locking as a duplicate - https://support.mozilla.com/en-US/questions/875653''
what more details do you want??

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Can't print from the web

no matter what i do i can not get any part of a web page to show up in "print preview" and therefore I can not print from the web. Using an HP Officejet Pro L7580 All in one, running Vista 32 bit, and IE 9. Have already uninstalled and reinstalled printer, drivers, etc. Any ideas?

Hi there I hope you are doing well and sorry to learn that you are having this issue;
when you reinstalled the printer did you download the latest driver,firmware from the HP site? If you did not GO HERE.
This the main support page of your printer if you need it in the future;
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=2512008&task=&
Please download and run the HP print and scan doctor .
Let me know if this finds any errors, I will do my best ot help you if you need further assistance.
Hope this helps!
RobertoR
remember ~▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP Officejet pro 8500A plus can not print from ethernet connect computer

Setup:
HP Officjet Pro 8500A Plus connected to a netgear wireless router using wired ethernet.
Desktop with windows7 connected to the same netgear wireless router using wired ethernet.
Can print from other computers connected to the the wireless router using wifi but can not print from this desktop connected using the wired ethernet.
Can not print from the Windows7 PC which is connected to router over wired Ethernet. Printer is connected to the same router using wired Ethernet. Other notebook connected to the router over wireless prints.
Windows7 device & Printerhows printer is ok.
Once a job is sent to printer, show status printing for a while after the status will show error.
Now the status shows error
HP Print and Scan doctors shows printer ok.
But if you try to print the test page, unable to communicate to printer error comes.
Tool box can read all information about the printer

Please reload the drivers and software on the Win7 PC. Reconfigure and try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Can not boot from OSX disc

I recently partitioned my internal drive with an 80 gig partition to run Ubuntu , removed Ubuntu and now can not resize hd to recover the 80 gig that I used , there was a program with this Ubuntu install called rEFIt that was installed for the dual boot , My problem is that Itunes keeps crashing and I have spent somewhere around 8 hours trying to fix this issue and in the process I discovered that I now can not boot from the osx disc but I can boot from the Ubuntu disc , what can I do to correct this issue or is there anything that I can do to correct this and recover the 80 gig that I used ?

The only solution was to erase hd and restore from time machine backup......
According to everything that I have seen , read and tried when you partition the mac hd the way that mac is designed it will lock the hd thus preventing any access even using the startup disc to repair. As far as restoring everything after the erase and reinstall of the OSX that was easy and painless. FOR ANYONE WHO DOES NOT BACKUP THEIR DATA THIS IS WHY YOU SHOULD!!!!
Once OSX is reinstalled the migration assistant will ask if you want to restore from a backup , if you have time machine or any other sort of backup simply choose the one you wish to restore from and continue , must admit I was a bit hesitant at first , I must say that everything restored with the exception of some settings that I have had to restore but they were not major settings , after the backup is restored simply run update check and reinstall all updates , may need to do this a couple of times.
Depending on the amount of data you have will determine the length of time for restore (500 gigs about 6 hrs.) but it will restore user account settings , connection settings and network settings.
Hope this will help if anyone has experienced the same problem.

Imac 21" mid 2011 can not boot from USB device?

Hi,
hope someone can help me.
Bought the new imac 21" and replaced the superdrive with a ssd drive.
Works great but it seems that the imac is not able to boot from any usb device.
I put my osx install disk in my external dvd drive and powered my mac.
While booting up (pressing cmd) the mac does not recognize my external dvd drive. This works great with my MBP late 2008. But the imac can not boot from the dvd drive. Also pressing "c" while booting does not work. Doing that a grey screen appears and after some time mac boots from hdd.
So i installed mac os via target mode over firewire withbmy old imac. This works.
But now i want to install windows on a bootcamp partition.
I can't boot from the windows 7 professional dvd, too. So i tried to create a bootable win 7 thumbdrive. Mac can't boot from this too. Reading many threads in some forum i tried with rEEfit. Reefit shows the usb thumbdrive whike booting, but using this will end in a black screen error from bios: "no bootable device....". Tried a knoppix on the usb thukbdrive, too.... No bootable device....
It seems that there is no way to boot from ANY external usb device like dvd drives or thumbdrives......
What more can i do? I tried for 2 evenings now, but nothing worked out for me......
Currently i don't see any any to install win 7 without an internal superdrive, but can this be??
Thanks for any comments.
Kwicks

Internal is definitely the easiest but you can boot from external HD or external optical drive, the mac is just very picky on what works and what doesn't.
For an external drive or usb stick it has to be GUID partition table and have 10.4.5 or better installed on it, for more info check this link out ( http://support.apple.com/kb/ht1948 )
Hope this helps,
Joe

I can not access to the isqlplus from the client

Version: Oracle 10.1.0.2.0
I have installed Oracle 10.1.0.2.0 on SuSE Linux Enterprise Server 8.
I can access to my dbconsole from PC without any issue.
I can also access to the isqlus environment from the server without any issue.
But I can not access to the isqlplus from client or PC.
I can go the first web page of isqlplus by using isqlplus url by clicking on isqlplus icon under home page of dbconsole.
But I enetered username and password.Its bring error page.
Note: isqlplus start up on the server.
Any help wil be appricated.
D

The page cannot be displayed\
The page you are looking for is currently unavailable.
The Web site might be experiencing technical difficulties,
or you may need to adjust your browser settings.
Please try the following:
Refresh button, or try again later.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
To check your connection settings, click the Tools- menu, and then click Internet Options .
On the Connections\ tab, click \ Settings\b0 .
The settings should match those provided by your local area network (LAN) administrator or
Internet service provider (ISP).
If your Network Administrator has enabled it,
Microsoft Windows can examine your network and automatically discover network connection settings.
\line If you would like Windows to try and discover them,
Detect Network Settings <javascript:doNetDetect
Some sites require 128-bit connection security. Click the \b Help\b0 menu and then click
\b About Internet Explorer \b0 to determine what strength security you have installed.
If you are trying to reach a secure site,
make sure your Security settings can support it.
Click the \b Tools\b0 menu, and then click \b Internet Options\b0 .
On the Advanced tab, scroll to the Security section and check settings
for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
back button to try another link. \
Cannot find server or DNS Error\line Internet Explorer \

Sharepoint powerBi PowerQuery- Can not refresh from the browser

Similar Messages

Maybe you are looking for