Sharepoint Returns a blank Page on clicking "Create" Link

I have Installed Sharepoint 2010 on windows 8.1. Its working fine except when I clicked on "Create" link in viewlsts.aspx page, popup opens with blank page hence I am not able to create any list or library in my site.
Any help?

Hi Amey,
Thanks for your sharing, it will be beneficial to those who stuck with the similar issue.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Similar Messages

Sharepoint Site returns a blank page

Hi,
I am working on a project with my professor and for it I need to set up SharePoint 2013.
The installation process worked out fine. I created a new Application Pool, and also a Site collection associated with it.
Central Admin page is working fine but when I try to open Site I created I get three login attempts and then a blank page is returned. I have seen many questions like this one and they advised to turn off Windows Authentication. I have turned off all the
authentications and when I try to access the site I get no prompts asking for credentials but it still returns a blank page.
When I try to access the same site from a different machine (no the server), I believe the page designer is supposed to come up. However, I get the SharePoint page saying "Working on it" and it stays there it does not go any further.
PS: I am setting up a 2-tier farm.
Thank You in advance.

Hi,
According to your post, my understanding is that you got three login attempts before it loaded a blank page.
For this issue, we can run the following power shell command to disable the
LoopbackCheck.
New-ItemProperty HKLM:\System\CurrentControlSet\Control\Lsa -Name "DisableLoopbackCheck" -value "1" -PropertyType dword
You may have to restart the servers and will have run this from all of your SharePoint servers.
You can also navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa in registry and create the dword32 for
DisableLoopbackCheck, modify the value to 1.
For more information:
http://sp-vinod.blogspot.in/2013/03/disable-loop-back-check-in-sharepoint.html
What’s more, we also can try creating a new web app in SharePoint Central Admin and see if you are able to access that site correctly. If you are then the odds are that something went wrong during the provisioning of the original web app.
There are some similar articles for your reference:
http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx
http://iedaddy.com/2009/04/sharepointdisable-loopback-check/
http://www.jeremytaylor.net/2010/05/24/sharepoint-disable-loopback-check-disableloopbackcheck-dword-in-registry/
If you have any problems, please feel free to reply me.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Submitting POST forms on certain websites returns a blank page

Some websites with POST forms return a blank page when I submit the form. The data apparently gets submitted, so depending on the website I can refresh the page and it works fine. But some websites, this completely breaks the functionality.
Most recently this happened to me clicking the "Ship to this address" button on Etsy (which is a site-breaking situation and refreshing took me back to the same page). Then I came here to register an account and, well, funny story, it actually happened when I clicked the Register button after filling out a username, password, and email address (but refreshing worked).
Possibly related: around the same time this started happening, I noticed that 307 redirects would give me a blank page saying "Document has moved [link]here[/link]," and I'd have to click "here" to move on, as opposed to the redirect automatically happening.
I've tried disabling add-ons and it hasn't helped.

Clicking the Post Question button just now also sent me to a blank page, and refreshing just took me back to the Post Question form. Fortunately by confirming my account through my email, my question got posted. Otherwise I would have had to post on this forum in Chrome. The horror.
(EDIT: But the Post Reply button worked perfectly)
(EDIT 2: Update Answer did not)

Blank Page when clicking on Site Settings SharePoint 2013 Office 365 Sub Sites E3 Plan

I'm having a problem with 1 Community site collection where all my sub sites render blank screens for Site Settings
Page, but my root site collection displays links on Site Settings Page.
Hope It shouldn't be a permission problem since I'm a site collection administrator, so it appears limited to
just this site.
Its very urgent any help would be of great help, Thanks in Advance.
Regards,
Raghav.
G.K. Shri Raghavendra

Hi Raghav,
Please check if there is any message in subsites Site settings blank pag source file in IE browser via F12.
Also check if it could help with adding SharePoint site URL in IE trusted sites zone.
Also test this issue out side your company network, see if there is any settings in comany network causing this, e.g. firewall mentioned by Shannon Herold 101 in your another thread.
SharePoint Online is as part of Office365 in the cloud, it seems you have posted the issue in our Office365 dedicated forum, please keep monitoring the udpate there.
http://community.office365.com/en-us/f/154/t/318200.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Blank page when clicking on Birth of Child process in portal

Hi,
We activated Birth of Child(US) process in portal. The link is coming fine but on click of it nothing is coming in the portal...neither adobe form nor error message. Just a blank page is coming. When I run the same process in HRASR_TEST_PROCESS, its working fine.
Is this with the required authorization or any other problem. Please help me.
Thanks,
Swamy

Hi Raghav,
Please check if there is any message in subsites Site settings blank pag source file in IE browser via F12.
Also check if it could help with adding SharePoint site URL in IE trusted sites zone.
Also test this issue out side your company network, see if there is any settings in comany network causing this, e.g. firewall mentioned by Shannon Herold 101 in your another thread.
SharePoint Online is as part of Office365 in the cloud, it seems you have posted the issue in our Office365 dedicated forum, please keep monitoring the udpate there.
http://community.office365.com/en-us/f/154/t/318200.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Delete Blank Page in Form Created in Designer ES 8.2

A fairly simple, straight-forward 3-page form was created in LiveCycle Designer ES 8.2. At the end of the form (when saved and opened as a dynamic PDF) there is a rogue page at the end. I cannot figure out how to delete the blank page.
Any assistance would be greatly appreciated.
Ms. Shayne Morgan

Thanks MUCH!!!! You have helped tremendously!!! :-)
Ms. Shayne Morgan

Can I return to previous page after clicking a bookmark hyperlink?

I am writing a book that I want readers to be able to click on a hyperlink to view more information about things, but then easily return to the previous page. For example:
Ingredients:
1 - apple
2 - bananas
4 cups sugar
apple, bananas, and sugar would be hyperlinks taking the user to spot in the book where I discuss each. I want them to be able to easily return to the page that sent them, but cannot find a way to do it.
Thank you!

Well, perhaps I should give a little more detailed example to illustrate why I'm trying to do this. I see now that my initial example was probably overly simple.
The book is an emergency care manual for providers in the field.
It will have, for example, a section devoted to intubation that describes the technique, medications to use, proper verification, and so forth (this section would be a significant amount of information). Then in a different section, say cardiac arrest, it will say "perform intubation per general guidelines" which will be just one little line of the entire cardiac arrest section. I want to hyperlink "perform intubation.." to the intubation section but then have a way to quickly and easily return to the cardiac arrest section.
Does that make more sense? Maybe there's a better way than hyperlinks/bookmarks, but I haven't discovered it yet.
Thanks.

Unwanted blank pages inserted when creating pdf from scanner

Hello, when creating a pdf from a document scanned via Adobe Acrobat X Pro, the program inserts an unwanted blank page in between each page being scanned. So, if scanning 50 pages, we get 100, etc. How do we remediate this problem? We have worked with the default settings, to no avail. We're using a Fujitsu fi-5530c2 scanner. We would appreciate any input to help resolve this issue! Thanks Mark

Hi,
you can automaticaly fix previously made documents using the Preflight tool.

About:Config opens for a fraction of a second, then returns a blank page

When attempting to open Firefox's about:config page, it shows the confirm/warning screen for a fraction of a second, then seems to redirect to a blank page.
I first noticed this just after installing Minefield, which I have now uninstalled - though I do not use about:config often and the issue could have started before then.

Did you use the same Firefox 3.6.x profile folder with the Minefield 4.0 version?
You should be careful with doing that because the two versions are not compatible (some files may get upgraded; extensions.sqlite) and you can get problem if you use that profile in the future again with a 4.0 version.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Create a new profile as a test to check if your current profile is causing the problems 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Transaction Lauch returns a blank page

Hi,
we have a problem with Transaction Launch.
In the Webgui of CRM 7.0 we use transaction launch to start some transactions from other systems like ERP. Clicking a link of WebGUI we could start the launching. But we got only a blank page. But if we enter the ITS-URL (which is defined in CRMS_IC_CROSS_SYS) in an Internet-Explorer window and do the login, and retry the link of WebGUI , then the transaction can be displayed, and it works very fine, However unfortunetly we have to to this for each session.
Does anybody have a solution?
Thanks
Yang

Check the source of the blank page.
Possible reason:
The logon page that is sent by the system contains an invalid comment:
"<!-- domain relaxation --!>". If the logon page contains more comments,
the entire HTML content between the two comments may not be interpreted by
the browser, and the page remains blank.
The browsers behave differently with regard to the defective HTML comment.
Mozilla Firefox seems to recognize the defective comment and displays the
logon screen. Internet Explorer seems to ignore the incorrect comment as
long as there is no other HTML comment on the page.
If you can find this line, implement the following note in your ERP system:
Note 1521043 - ICF system logon No logon screen.

Blank page after clicking on product purchase

Hi,
When I click on:
https://www.acrobat.com/en_us/landing/acrobat-trial.html
I arrive on a blank page...
I'm using a macbook with Firefox 32.0.1 on it.
I don't have any message telling me that I miss some kind of software to read the page.
Any idea on what to do?
Cheers,
Stéphane

Hi stephane7569,
I just checked the link myself, and all is well there. Please try clearing your browser cache and try again. Or, use a different web browser.
Please let us know how it goes.
Best,
Sara

EBS 11i - Getting Blank Page after Clicking System Administrator Link

Hi Experts,
I recently migrated the EBS 11i (11.5.10.2) from Solaris to Linux 5. Most of the things seems to be working fine but once I click the link System Administrator getting blank page. I found the following errors in the Jserv Logs. I am trying it from IE7 as well as from Firefox 3.
Please help to resolve the issue.
java.lang.NullPointerException
at edu.apollogrp.fsg.cas.EncryptionUtil.encrypt(EncryptionUtil.java:63)
at edu.apollogrp.fsg.cas.CASClient.getEncodedAndEncryptedStr(CASClient.java:102)
at edu.apollogrp.fsg.cas.CASClient.authenticateCAS(CASClient.java:53)
at oa_html._fndvald._jspService(_fndvald.java:200)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:595)
Thanks
Shashi

Hi Hussein,
No error in the Apache Log. Any how I have turned the CM off and login seems to be little better so will deploy the CM on seperate node. I upgraded the system from Jinit (1.3) to JRE 1.6.0_24. We are on Developer 6i patchset 18. But now while loaded the forms , it is hanging. I enabled the debug for JRE and got the following error.
I have relink all the executable (all completed successfully). Regeranted JAR with FORCE.
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA hasnt been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: No need to checking trusted extension for this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 558200 us, pluginInit dt 7706667 us, TotalTime: 8264867 us
basic: Applet initialized
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
basic: Loaded image: jar:http://hostname:8010/OA_JAVA/oracle/apps/fnd/jar/fndaol.jar!/oracle/apps/media/splash.gif
basic: Loaded image: jar:http://hostname:8010/OA_JAVA/oracle/apps/fnd/jar/fndforms.jar!/oracle/forms/icons/oracle_logo.gif
Exception in thread "thread applet-oracle.forms.engine.Main-2" java.lang.NoSuchMethodError: oracle.ewt.lwAWT.lwText.LWTextField.setTextAlwaysLeftAligned(Z)V
     at oracle.forms.engine.Main.initDesktop(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks

How to create links to the same page, how to create links to the same page

How to create link to the same page with iweb?
Thanks

You're referring to anchors. There are a couple of ways. These topics discuss them:
iWeb FAQ - Anchors
How do i hyperlink to certain portion...: Apple Support Communities
OT

Go back to new tab page after clicking a link

In Firefox 14 (Beta), after discovering New Tab Tools I decided to ditch Speed Dial and use the default new tab page. Didn't miss anything.
Yesterday, I upgraded to the FF15 beta and now when I click a link on the new tab page I can't go back to it. I need to open a new tab to go back to it, instead of being able to view a page, go back, and view another page. I tried looking in the about:config to see anything that could look remotely like an option to keep the new tab page in the back history, but I found nothing. Any way to fix this?
I also checked on Firefox UX, and it as that "feature" too. So it's not an add-ons problem, but instead a regression in Firefox.

I don't see a solution here, am I missing something?
I have this problem and would like to find the fix.
Thanks

Blank page after clicking Edit Page

Have just created a new Contribute connection to a new
website, without any problem. The webpage appears in the Contribute
window, but when I click 'edit page', the window goes blank. Does
anyone have any idea what this could be causing this?
Thanks.

Hi CoopCookie,
You have a couple of errors in your table structure (f.i. an
extra td tag in the class="dataTable" table and the main table is
closed twice from what I could see quickly). I mean there are tags
in the wrong places in your table structure. When you correct this
your page should display fine fine, even in Contribute. Browsers
are more forgiving to errors then Contribute, so that's why the
page probably looks fine on the internet.

Sharepoint Returns a blank Page on clicking "Create" Link

Similar Messages

Maybe you are looking for