SharePoint Search Service upgrade to 2013 fails: "Inner Exception: An item with the same key has already been added."
Here's the situation:
Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
Running the following commands:
$applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
$searchInst = Get-SPEnterpriseSearchServiceInstance -local
Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
"Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
Looking at the ULS logs, I find the following:
Inner Exception: An item with the same key has already been added.
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties() at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
upgrade) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade() at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade() at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade() at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
o, Boolean bRecurse)
Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
"SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.
Hi ,
You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support
Similar Messages
-
Every time I open Address Book (Lion) it opens to the same vcard with the same name in the search field. How do I keep this from happening? I have tried deleting the vcard, deleting the plist, and importing/exporting my contact. However, the search field contents are alwyas the same - even if I delete the field, close, and re-open. Thanks.
Hi Romulus949,
You should take a look at the Knowledge Base article [[How to set the home page]].
There are steps in that article to reset your homepage preferences to default. I would try that first to clear out any strangeness. Then you can set your homepage to anything you like.
Hopefully this helps! -
SharePoint Search Service Application Restore Is Failing
Issue:
When performing a Search Service restore with the CA UI, the restore is failing. The backup was generated from a Full level backup that is run nightly from the cmdlet Backup-SPFarm. The Farm is running SharePoint 2013 SP1, Windows Server 2012 And SQL
Server 11.0.3128. Both Production and the test environment have the same topology.
The sprestore.log file shows the following error message:
[12/17/2014 12:37:51 PM] Verbose: [Search Service Application] The default endpoint id for this application is 'b8b92dc6-38b3-49bf-90bc-d9ea64dcf928'.
[12/17/2014 12:37:51 PM] Verbose: [Search Service Application] Re-parented endpoint 'b8b92dc6-38b3-49bf-90bc-d9ea64dcf928' to this application.
[12/17/2014 12:37:51 PM] Verbose: [Search Service Application] The default endpoint has been found and set. NOTE: The id of the default endpoint will be different than specified in the logs if
the restore mode is not 'overwrite'.
[12/17/2014 12:37:51 PM] Verbose: [Search Service Application] Re-parented endpoint 'bb456994-47ac-4bad-9197-9a4d5b39bf5c' to this application.
[12/17/2014 12:37:55 PM] FatalError: Object Search Service Application failed in event OnPostRestore. For more information, see the spbackup.log or sprestore.log file located in the backup directory.
SqlException: The database principal owns a database role and cannot be dropped.
User does not have permission to perform this action.
[12/17/2014 12:37:55 PM] Debug: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj,
Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean
asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout,
Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Office.Server.Data.SqlSession.ExecuteNonQuery(SqlCommand command)
at Microsoft.Office.Server.Data.SqlDatabaseManager.GrantAccess(String user)
at Microsoft.Office.Server.Search.Administration.SearchDatabase.GrantAccess(String username, String role)
at Microsoft.Office.Server.Search.Administration.SearchDatabase.SynchronizeAccessRules(SearchServiceApplication searchApp)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.SynchronizeDatabases()
at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Provision()
at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.Microsoft.SharePoint.Administration.Backup.IBackupRestore.OnPostRestore(Object sender, SPRestoreInformation info)
A SQL Profile was run beginning at 12/18/2014 11:11.
A SQL exception can be found at 11:20:03 with the error:
The database principal owns a database role and cannot be dropped.
The issue has to do with the SQL statement just prior to the exception:
declare @p4 int
set @p4=NULL
declare @p5 int
set @p5=NULL
exec sp_executesql N'declare @db_user_name sysname
select @db_user_name = name from dbo.sysusers where sid = SUSER_SID(@user_name) and hasdbaccess = 1
if (@db_user_name is null)
begin
if exists(select * from dbo.sysusers where name = @user_name)
exec @revoke_result = sp_revokedbaccess @user_name
exec @grant_result = sp_grantdbaccess @user_name, @db_user_name output
end',N'@user_name nvarchar(128),@revoke_result int output,@grant_result int output',@user_name=N'----\sp2013uatfarmacct',@revoke_result=@p4 output,@grant_result=@p5 output
select @p4, @p5
I highlighted the row in red causing the issue. For some reason SharePoint during the Search Restore process try’s to delete the user “------\sp2013uatfarmacct” from the database Search_Service_Application_DB_60bb9889222841aa94f59aed71349a6b
And re-add them again. But the reason for the failure is because the user “------\sp2013uatfarmacct” is the owner of the database role “SPSearchDBAdmin”, so it cant.
I checked all other Service databases that contain the role SPSearchDBAdmin and they all correctly have the owner as dbo
NOT ------\sp2013uatfarmacct.
Further checking the SQL trace log a SQL batch is executed at 12/18/2014 11:19:59.790 that states the following:
-- Drop existing role members
IF EXISTS (SELECT * FROM sys.database_principals WHERE name = N'SPSearchDBAdmin' AND type = 'R')
Begin
DECLARE @RoleMemberName sysname
DECLARE Member_Cursor CURSOR FOR
SELECT [name]
FROM sys.database_principals
WHERE
principal_id IN
SELECT member_principal_id
from sys.database_role_members
where role_principal_id in (
select principal_id
FROM sys.database_principals where [name] = N'SPSearchDBAdmin' AND type = 'R' ))
OPEN Member_Cursor;
FETCH NEXT FROM Member_Cursor
into @RoleMemberName
WHILE @@FETCH_STATUS = 0
BEGIN
exec sp_droprolemember @rolename=N'SPSearchDBAdmin', @membername= @RoleMemberName
FETCH NEXT FROM Member_Cursor
into @RoleMemberName
END;
CLOSE Member_Cursor;
DEALLOCATE Member_Cursor;
End
-- Drop/Create role
IF EXISTS (SELECT * FROM sys.database_principals WHERE name = N'SPSearchDBAdmin' AND type = 'R')
DROP ROLE [SPSearchDBAdmin]
CREATE ROLE [SPSearchDBAdmin]
I highlighted the statement in red that is eventually causing the SP restore to fail. For some unknown reason to me when this statement is executed the new ROLE SPSearchDBAdmin owner is -----\sp2013uatfarmacct
instead of dbo.
As a test I executed via SQL Management Studio “CREATE ROLE [SPSearchDBAdmin]” and it correctly created the owner as dbo.
So the problem and my question is why when the SP Search Service is restored is the ROLE SPSearchDBAdmin owner being set to “-----\ sp2013uatfarmacct”, which in turn seems to be causing the restore failure?Hi!
I believe it is trying to delete a user who owns the schema of the database. You can try changing the schema owner to some other user like "dbo", and then drop the first user.
Below are a few links that can help you with much more details.
http://blogs.technet.com/b/mdegre/archive/2010/12/19/the-database-principal-owns-a-schema-in-the-database-and-cannot-be-dropped.aspx
http://littletalk.wordpress.com/2009/11/09/fix-for-the-database-principal-owns-a-schema-in-the-database-and-cannot-be-dropped-error-in-sql-server-2005/
http://dotnetgun.blogspot.com/2011/02/database-principal-owns-schema-in.html
Thanks,
Owens
Owens G. Jesse -
UCCX 8.0 Standard: fail to replace a script with the same name
Hi,
in my UCCX 8.0 (standard) i often want to perform a change on the sctipt of an application.
But when i try to upload it where the old script is, i choose to replace the old one but then i get a fail message.
What is the best way to perform it?Make sure you are using IE to access the App Admin. Cisco sometimes has issues with Firefox and other browsers when trying to make changes.
What is the exact fail message you get? -
Sharepoint Search Service Application isn't crawling.
Hi all,
I am new to Sharepoint 2013 and I do not know how to troubleshoot the issue of sharepoint search service.
My issue is that the sharepoint search service application is not crawling. How can I know the reason of this error and how to fix this.
Please help me.
Thanks.Hi Vishwajeet,
if you facing any problem in search you can Use the crawl log and crawl-health reports to diagnose problems
which is best recommended practices from Microsoft.
http://technet.microsoft.com/en-us/library/dn535606%28v=office.15%29.aspx
for View Search diagnostic and also check all the search related service whether its running or not
http://technet.microsoft.com/en-us/library/jj219611%28v=office.15%29.aspx
Please Mark as Answer and Vote me if it help to resolve your issue -
Open a SharePoint List item in Modal Pop up in SP 2013 fails after you filter or sort the list
Sorry for the long post. This has been killing me. I had this script working perfectly fine in SharePoint 2010 (online) and basically i have a source custom list (list A) with a hyperlink column and a Destination List with say title and my name.
Source List (list A) looks like this with these 2 columns
Title Test Link
A Link 1
B Link 2
C Link 3
Each of these links link to the actual list item in the destination list, so for example, link 1 is/sites/2013DevSite/Lists/Destination%20List/EditForm.aspx?ID=1
So basically i want anytime the Link are clicked that point to another list's item to open in a modal dialog and the script below worked perfectly fine in SharePoint 2010 (online)
<script language="javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js" type="text/javascript"></script>
<script language ="javascript" type="text/javascript">
jQuery(document).ready(function() {
jQuery('a[href*="EditForm.aspx"]').each(function (i, e) {
// Store the A tag's current href in a variable
var currentHref = jQuery(e).attr('href');
jQuery(e).attr({
'href': 'javascript:void(0);',
// Use the stored href as argument for the ShowInModal functions parameter.
'onclick': 'ShowInModal("' + currentHref + '");'
function ShowInModal(href) {
SP.UI.ModalDialog.showModalDialog({title: "Edit Item", url: href});
</script>
All it does is find the href tags for that particular value Editform.aspx and the pop modal works in SP 2010 online. So the site page is designed in such a way there is a content editor web part with the reference to this javascript file and the sharepoint
list is right beneath it and this worked perfectly opening in modal windows in SP 2010.
Since migration to 2013, this is what exactly happens
1.) when you come to the site page, the modal works,
2.) If you filter or sort on say the Title or Test Link column in Source list (lets say you select the Value A), the script does not fire at all, if i hover over the hyperlink, the who hyperlink is shown and does not open the hyperlink in the modal pop up.
- This is important because i want to be able to sort on a particular item...
Could someone please let me know what am i doing wrong and why is this not working when i sort the list. Thanks for all the help.
Once again i am trying to open a sharepoint list item in Sharepoint 2013 from another list using JqueryA ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards. -
Hi All
I have one sharepoint list with huge data i.e with 20columns and more than 200 records with the fields .
Suppose lets consider there are A,B,C,D,E,F,G,H columns.
Now i want to create one form with the fields A,C,E.
When the user enter the existing data of list for columns A,C..based on C value the E column value should change and update that particular item in the list.
Please guide me without visual web part can we acheive this by Sharepoint designer 2013 or what would be the preferable solution.
Please help me on this as it is very urgent from me..
Thanks in Advance
Sowjanya GHi,
According to your post, my understanding is that you wanted to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.
I recommend to create workflow associated to the list and then start the workflow automatically when an item is changed.
In the workflow, you can add condition and actions as below:
If current item: C equal to Test1
Set E to Test2
Then the value of the filed E will be changed based on the value of the filed C.
In addition, if you create the form using InfoPath, you can add rule to the filed C as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
"URl has already been reserved".
Reporting services for port 80 and 443 works fine both for reports and reportingserver on SQL server 2008 R2. But when I try to upgrade from SQL server 2008 R2 to 2012 this error pops up. How to make sure before upgrading regarding reporting services that
URL reserves and SSL are fine or how to fix reporting services are upgrade like repair install.
ThanksHi yashmitl,
In your case, please running the following command to check the current URL reservations on http.sys.
netsh http show urlacl
Then, please delete the URL reservation by executing the following command try to resolve the issue.
netsh http delete urlacl <url>
There is a similar issue, you can refer to it.
http://social.technet.microsoft.com/Forums/en-US/d5204dd3-e26d-4592-8ef0-a94005fc46a5/the-url-has-already-been-reserved?forum=sqlreportingservices
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
I am using Project Server 2010 with SQL Server 2008 R2.
I have a PWA Instance which was running fine. I have a big number of projects and I do not keep site for all the projects as we do not need project site in our business.
Everything was running fine but during last few days, some of the jobs like Reporting (Project Publish) and Reporting (Project Delete) job is failing with the same error details for all the projects. I am not able to trace where the data is wrong/corrupt
and how to resolve it.
The error detail and ULS Log is given below anod I would appreciate if someone can guide me where the problem is and suggest me any solution.
QUEUE ERROR DETAIL:
General Reporting message processor failed:
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='4f36afe0-43dc-4143-befc-0452da416e69' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='071aeb7b-540e-45fa-b40b-a94a5d2e8e04' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='55445e77-51e3-40d8-a62f-e6db0b897444' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='3ab5a1ba-0915-45bb-a078-4b4b7c38af51' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b27acd8f-6cde-47d4-bd53-5930e84dc940' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b7250544-2a11-4887-8dcd-378b34b33ae1' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingProjectPublish.ReportProjectPublishMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='0706d212-f737-43ea-b694-c420488d57bb' JobUID='ca238fcf-d91b-46d6-a9c2-15f2cc35230d' ComputerName='WebSrv1' GroupType='ReportingProjectPublish'
MessageType='ReportProjectPublishMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine WebSrv1 for entries with JobUID ca238fcf-d91b-46d6-a9c2-15f2cc35230d.
ULS LOG:
Timestamp Process
TID Area Category
EventID Level Message Correlation
01/19/2015 19:05:07.44 Microsoft.Office.Project.Server (0x1D30) 0x23FC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=117.485513497555 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:07.66 Microsoft.Office.Project.Server (0x1D30) 0x2C94 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=192.534598230475 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.16 Microsoft.Office.Project.Server (0x1D30) 0x1CFC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=448.362263674397 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.36 Microsoft.Office.Project.Server (0x1D30) 0x17E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=162.22152253546 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.00 Microsoft.Office.Project.Server (0x1D30) 0x0898 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=557.699412860413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.36 Microsoft.Office.Project.Server (0x1D30) 0x1F20 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=253.695754010613 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.67 Microsoft.Office.Project.Server (0x1D30) 0x0D68 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=239.76302803952 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:10.64 Microsoft.Office.Project.Server (0x1D30) 0x3324 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=973.469925841736 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:11.92 Microsoft.Office.Project.Server (0x1D30) 0x2DB8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1275.5063556303 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:12.96 Microsoft.Office.Project.Server (0x1D30) 0x0A1C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1041.55499409959 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.15 Microsoft.Office.Project.Server (0x1D30) 0x0518 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=133.891034879385 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.35 Microsoft.Office.Project.Server (0x1D30) 0x14EC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=207.250205426327 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.69 Microsoft.Office.Project.Server (0x1D30) 0x10B4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=267.137845971639 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.93 Microsoft.Office.Project.Server (0x1D30) 0x14E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=209.552772167485 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.10 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=717.808222684698 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.67 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (FillTypedDataSet -- MSP_SRA_GetData). Execution Time=307.24482978413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:17.58 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=123.306566048297 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.12 Microsoft.Office.Project.Server (0x1D30) 0x25F4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_CreateSavedTasksForProject). Execution
Time=111.699445284922 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.61 Microsoft.Office.Project.Server (0x1D30) 0x2AC8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_Statusing_BuildTaskHierarchy). Execution
Time=449.279962592357 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tci Monitorableser1 PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] System.IO.FileNotFoundException: The site
http://epm.company.com/sites/Workspaces2/PROJECT_1 could not be found in the Web application SPWebApplication Name=SharePoint - 80. at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken
userToken) at Microsoft.SharePoint.SPSite..ctor(String requestUrl) at Microsoft.Office.Project.Server.BusinessLayer.Project.OpenProjectWeb(Guid projectUid) at Microsoft.Office.Project.Server.BusinessLayer.Project.SetPwsProperties(Guid
projectUid) at Microsoft.Office.Project.Server.BusinessLayer.Queue.ProcessPublishMessage.ProcessMiscellaneousPublishMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tcj Monitorable PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] MiscellaneousPublishMessage failed on project b95c52ba-bc00-4301-aab5-890d0b057c29 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwj Critical Standard Information:PSI Entry Point: Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d
PWA Site URL: http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) RDS: The request to synchronize change(s) to project Project
UID='b95c52ba-bc00-4301-aab5-890d0b057c29'. PublishType='ProjectPublish' failed. Message: 'ReportingProjectChangeMessageFailed'. Message Body: The given key was not present in the dictionary. Error:(null) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store) at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting() at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea) at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4dWithout seeing the history, one possibility might be some corruption in the reporting database. Assuming that you are following best practices for SQL DB management, and this is not a DB neglect problem, then I would try to force a refresh to see if that
helps. You can do this by executing a custom field backup and then restore. Note: Do not do this during production hours. Let us know if that provides any therapy.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG -
I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.
Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search -
Is it possible to search for multiple folders with the same name and...
Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.
user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle: user11919409
Status Level: Newbie (10)
Registered: Dec 7, 2009
Total Posts: 102
Total Questions: 28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions? -
I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
per my business requirement.
The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
"Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
same version and product ID."
Please assist me anyone. It will be so kind of you.....
Naveen Kumar
Steria India Ltd.Did you updated the AppManifest.xml file
and change the version.
If this helped you resolve your issue, please mark it Answered -
after upgrade to 11, I lost hundreds of songs, searched files seems 11 has maybe deleted them, tried several different things including recovery software,still no luck, can I undo 11?
Focus on a single file that shows with an exclamation mark. Select it, press CTRL+I to Get Info, click No when prompted to locate the file, and look at the location given on the summary tab. Now use Windows search to locate the file by searching for files with the same filename. Post back both paths and I can suggest a resolution. In the unlikely event that the original has really vanished rolling back to an earlier version of iTunes won't fix anything.
tt2 -
ORA-27369: job of type EXECUTABLE failed with exit code: Key has expired
Hi
I defined the following Job on Linux Redhat 5.4 & Oracle DB 10.2.0.4:
BEGIN
dbms_scheduler.create_job(job_name => 'expjob',
job_type => 'executable',
job_action => '/EXPORT/scott_cmd',
enabled => TRUE,
auto_drop => FALSE);
END;
drwxrwxrwx 2 oracle oinstall 4096 Jul 10 19:19 EXPORTwhere:
/home/oracle>cat /EXPORT/scott_cmd
#!/bin/sh
exp parfile=./scott.par
/home/oracle>cat /EXPORT/scott.par
FILE=scott.dmp
USERID=STRMADMIN/STRMADMIN
OWNER=SCOTT
LOG=scott.log
/home/oracle>ls -l /EXPORT/scott_cmd
-rwxr-xr-x 1 oracle oinstall 34 Jul 10 19:16 /EXPORT/scott_cmd
/home/oracle>ls -l /u01/app/oracle/OraHome_1/rdbms/admin/externaljob.ora
-rw-r--r-- 1 root oinstall 1575 Jul 10 18:42 /u01/app/oracle/OraHome_1/rdbms/admin/externaljob.ora
(run_user = nobody
run_group = nobody)
/home/oracle>ls -l /u01/app/oracle/OraHome_1/bin/extjob
-rwsr-x--- 1 root oinstall 64842 Jul 8 14:21 /u01/app/oracle/OraHome_1/bin/extjob
/home/oracle>ls -l /u01/app/oracle/OraHome_1/bin/extjobo
-rwxr-xr-x 1 oracle oinstall 64842 Jul 8 14:21 /u01/app/oracle/OraHome_1/bin/extjoboWhen I executed as user STRMADMIN ( has DBA & CREATE JOB Privileg) the Job, I got always the error:
/EXPORT>sqlplus STRMADMIN/STRMADMIN
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Jul 10 19:40:24 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exec dbms_scheduler.run_job('expjob');
BEGIN dbms_scheduler.run_job('expjob'); END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: Key has expired
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1
SQL>Please, help
regards
hqt200475
Edited by: hqt200475 on Jul 10, 2011 10:04 AM
Edited by: hqt200475 on Jul 10, 2011 10:05 AMHi Ronald,
I need the external Job in the 10.2.0.4-Environment because of the Online-Upgrade of a 10.2.0.4-Database to 11.2.0.2 with STREAMS. I want to start the old export from a PL/SQL-Procedure.
Now returning to my problem:
First: Change the run user to oracle:oinstall $ORACLE_HOME/rdbms/admin/externaljob.ora
# This configuration file is used by dbms_scheduler when executing external
# (operating system) jobs. It contains the user and group to run external
# jobs as. It must only be writable by the owner and must be owned by root.
# If extjob is not setuid then the only allowable run_user
# is the user Oracle runs as and the only allowable run_group is the group
# Oracle runs as.
#run_user = nobody
#run_group = nobody
run_user = oracle
run_group = oinstallsecond:
/EXPORT>cat scott_cmd
#!/bin/sh
ORACLE_SID=STB;export ORACLE_SID
ORACLE_HOME=/u01/app/oracle/OraHome_1;export ORACLE_HOME
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/opmn/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib;export LD_LIBRARY_PATH
/u01/app/oracle/OraHome_1/bin/exp parfile=/EXPORT/scott.parand:
BEGIN
dbms_scheduler.create_job(job_name => 'expjob_r',
job_type => 'executable',
job_action => '/EXPORT/scott_cmd',
enabled => TRUE,
auto_drop => FALSE);
END;
/The manual execution of export as user oracle/oinstall was unproblematic, But I still got the error when running the following procedure :
SQL> exec dbms_scheduler.run_job('expjob_r');
BEGIN dbms_scheduler.run_job('expjob_r'); END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: Operation not
permitted
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1regards
hqt200475 -
My Ipod classic has started to play mono only through the headphones. I have tried different headphones with the same outcome. Is the device repairable or better to upgrade?
Hey Grimeymouse,
Thank you for contributing to the Apple Support Communities.
It sounds like your iPod classic is only playing sound in mono when using multiple headphones.
Since you've likely isolated this behavior to the iPod by trying multiple headphones, see this advice from the "The headphones don't work" section of the iPod troubleshooting basics and service FAQ:
If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
All the best,
Jeremy
Maybe you are looking for
-
After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version. Can I retrieve that icon and thus that facility?
-
My app store is not showing up on any of my screens? where is it and how do I get it?
How do I find the App Store it is not showing up for me
-
Within itunes, can I use the file/library/export library option to transfer itunes to a new pc? I have read the other options but they will be difficult for me to action. Can this be used as an easier route?
-
Just some newbie questions :)
what would happen to my macbook pro system if i didn't upgrade my OS X to the latest one everytime apple releases new one? will it get any bug or viruses or something strange? thx,
-
Limits on number of invoices put through AP Open Interface Tables
Hi, a quick question. We have multiple AP systems which we are thinking of interfacing directly with eBusiness Suite. With a potential of approximately 20,000 invoices per night/batch (each invoice will have on average two distribution lines). All in