Sharepoint send to button not working with document mode 9

Hi All,
We are using document mode 9 for HTML 5 in the master page but the SharePoint send to button is not working with ie 9.
Can anyone help me to resolve this issue.

SharePoint 2010 doesn't use HTML 5, so its possible that the browser is running in quirks mode. Try the default compatibility mode and see if that works for you.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Similar Messages

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • Send & Recieve functionality not working with  WebDav after installing Acrobat XI

    Send & Recieve functionality not working with  WebDav after installing Acrobat XI for PDF.  Acrobat XI is complete installations(Trial Version).

    Hi Kiro ,
    Did you try opening that file in any other browser ?If not ,please try doing that once and see if that  works for you.
    Try Repairing Acrobat once and see if  that helps.
    Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
    Regards
    Sukrit Dhingra

  • MBA 13" media buttons not working with iTunes

    I just got my mba 13" and everything is great, but for some reason the media buttons do not work with itunes. I've tried them with vlc and other applications and they work fine. Any ideas how I can fix this?
    Thanks!
    Danny

    (n_n) wrote:
    Hi,
    No, it didn't work fine with VLC. Whenever I pressed "play/pause", it'll trigger iTune and the media buttons become the controller for both applications at the same time.
    What the %^&*..
    Cheers.
    Reset PRAM.

  • Print button not working with Xerox pluggins installed

    Thanks to the wonderful people here I found that if you have any Xerox plugins in /Library/Printers/PPD Plugins you can experience the print button not working.
    Removing them fixes it which is nice but I need the plugins, anyone know a work arround?

    I've seen this happen with some of our Xerox PPD's on PC's. The cause in this case, is their reference to virtual memory with older OS systems.
    I instead used an older PPD or a PPD I had edited to support 200"x200" custom pages sizes, supporting full color.
    All I needed was a clean postscript file.
    The Adobe 7 PPD writes clean PS.
    If you need some kind of VIPP instructions in your PPD for the Xerox, I'd look at getting a newer PPD form Xerox made for OSX.

  • Why is my page orientation button not working with the new update to pages?

    Since I have updated my pages my print orientation button is not working. amy ideas as to why that is and are ther many people with this problem???

    We are all busy with many other problems in Pages 5.
    Unless you have found some real reason to use Pages 5 just go back to Pages '09 which should still be in your Applications folder, until Apple sorts this all out.
    Peter

  • Keyboard Buttons Not Working With Update

    When I first installed iTunes, I noticed that the media shortcut keys on my Labtec Media Keyboard were not working. They worked perfectly fine for Windows Media, but my primary audio player is iTunes. Then when I installed the 7.1.1.5 update, I noticed that my keyboard buttons were working for the first time with iTunes. Now that I just updated to 7.2, I notice that the keyboard buttons do not work again.
    Any suggestions?

    Maybe some of the following ideas will help those wanting to control iTunes in the background (I don't).
    1. If you are running iTunes on a Mac (MacBook, MacBook Pro, Mac mini, or iMac) running Windows (via Boot Camp) then you can use the Apple Remote with iTunes (Boot Camp 1.2 drivers added support for the Remote). Therefore with initially iTunes in the background you can press the menu button on the Apple Remote to bring it to the front, and use the remote to control iTunes as normal. Furthermore, if you also have the Microsoft Media Center remote, you can still use the Media Center button to bring Media Center back to the front (pushing iTunes back in to the background) and then control Media Center.
    2. The KeySpan Express Remote is a USB infra-red controller with both Mac and Windows software. I have not tried this on a PC but on the Mac, the software has a special iTunes mode to let you control iTunes in the background. Even if you don't use this special mode, it can still be configured have the equivalent of the Apple menu button to bring iTunes to the front and then let you control iTunes. See http://www.keyspan.com/products/usb/urm17a/homepage.spml
    Most of the time, I actually don't use iTunes to play music, but to merely act as a server. I use a Roku SoundBridge M2000 to play music (I have three of them around the house), and this can be used with a Mac or PC. There are also other similar devices available like the Sonos ZonePlayer or the SlimDevices SqueezeBox (or even possibly the Apple TV or XBox 360).
    Note: If iTunes is already in the front then you can even use the Microsoft Media Center remote to control iTunes!!

  • Smart Shape Buttons Not Working With Scalable HTML5 (in Captivate 7)

    Hey everyone,
    first of all: everything was fine with CP 6, but since we upgraded to CP 7, I have troubles with smart shape buttons (exported as scalable(!) HTML5)! This is incredibly annoying.
    When a project is exported as scalable HTML5, I cannot click smart shape buttons which I use quite often. I tried Chrome, Firefox, Safari, iOS, ...
    When exported as flash or non(!) scalable HTML5, everything works, but it looks horrible on Smartphones – so this is not a solution we can work with.
    I uploaded an examle:
    Captivate-File: https://dl.dropboxusercontent.com/u/340109/A1/Test_CP_Forum.cptx
    Non scalable HTML5: https://dl.dropboxusercontent.com/u/340109/A1/Test_Non_Scalable_HTML5/index.html
    Scalable HTML5: https://dl.dropboxusercontent.com/u/340109/A1/Test_Scalable_HTML5/index.html
    We have customers waiting for projects to be finished and I really rely on clickable smart shapes!
    I kindly ask for a solution
    Georg

    I'm using a Mac (latest version).
    @devices: Android and iOS smartphones and tablets as well as Mac and Windows PCs.
    "Do you see this same issue on a blank project (With 2 or 3 Smart Shapes) ?"
    I'm not sure if I get you right, but the project I posted is nearly a blank project (created with CP7). So I think the answer is "yes".

  • SharePoint Send To function not working - STSUpld CopyCtl Class

    Hi,
    We ran into a problem on Windows XP and IE 8 that the send to functionality didn't respond in our SharePoint 2010 Enterprise env. We discovered that the problem was the 'STSUpld CopyCtl Class' control. This problem was mentioned all over the internet and
    on this forum:here.
    As I understand from
    this MSDN page it does the following:
    "An ActiveX control that enables a user of Microsoft SharePoint Foundation 2010 to copy a document in a list to one or more locations."
    When we disable the control the Send To functionality does work, but we just disabled the control that is responsible for this!
    Question:
    After disabling the mentioned Add-On what functionality IS responsible for the Send To action?
    TIA!

    Hi sander_d,
    According to your description, my understanding is that you want to know what is responsible for the Send To action.
    There is a feature called Content Organizer at site level. If you don’t enable this feature, when you use Send To connection, you will get an error, and the function doesn’t work. So it seems that the Content Organizar feature is responsible for the Send
    To action in SharePoint 2010 Standard and Enterprise.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Volume control buttons not working with new usb keyboard

    Hi all,
    I recently replaced the bluetooth keyboard that came with my iMac with the usb keyboard (the long aluminium one, with the number block). Typing is no problem, but the volume control keys dont seem to work with this keyboard as I was used to with the bluetooth keyboard: max vol, increase/decrease and vol. off dont operate with any of the keys (f, alt, str, cmd, shift). Only thing I can do is get a view of the running programs or make the current application vanish from the screen.
    Tried to change the keyboard setting in preferences for the F1-12 keys - made no change.
    help is very much appreciated.
    Thanks

    I was able to fix this bug by upgrading to OS X 10.6.8.
    Very strange that a) it was a problem in the first place and b) that the upgrade did not happen automatically
    Thanks very much to Haggibbor, who alerted me to that possibility. Since I read this in a thread I did not open myself, I unfortunately do not know how to let him have the 10 points I would like him to receive. (Hints for this newbie are very welcome.)
    Problem of volume control keys is now solved.

  • Buttons not working in preview mode

    i have a really strange issue that i have spent way too long on and need some help.
    I have a submenu i created, from a template, and had everything working perfectly.  i removed the text layer from the buttons on the right side and now all but 3 links work.  I have deleted the "damaged" button and copied a working button nd then relinked and it still doesn't work.  I have turned off auto-button routing and re-numbered every button.  I was able to get 2 of the buttons to work (no idea how) but now they are not working again. 
    I am sending a complete screen shot of the damaged button, compared with one right beside it.  Please tell me what i am missing?

    For that matter, the "return to menu" which is set to a Main button type, isn't working either.  that is one of the three.  After i had removed the damaged button and copied it from another it worked.  Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons.  I just can't figure it out.  I have shut the app down and restarted and nothing seems to be working

  • Buttons not working in fullscreen mode

    Hi everyone,
         I have a site where our Flash content can be sent to fullscreen by the user. When in fullscreen mode, in some computers the buttons within the content and the mouse stop working completely. It still exits from fullscreen by clicking the escape buttons.
    I have a Win XP computer where it works in Firefox and IE but won't work within Chrome. They both have the latest player installed.
    I have a Windows Vista where it does not work in any browser.
    On a Linux box (version 10,1,53,64) it works on any browser.
    On another Win XP computer with version 10.0.45.2 it works with any browsers.
    On some Macs it works, on some it doesn't.
    The swf file was produced with Flash CS3.
    Any ideas?

    For that matter, the "return to menu" which is set to a Main button type, isn't working either.  that is one of the three.  After i had removed the damaged button and copied it from another it worked.  Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons.  I just can't figure it out.  I have shut the app down and restarted and nothing seems to be working

  • Portege M700 - Rotation Button Not Working In Tablet Mode

    I have a Portege M700 and when I turn it into tablet mode the rotation button quits working.
    It works when it in laptop mode.
    I have the rotation utility set to go into secondary landscape and its no longer switching and the button on the front of the screen will not switch it anymore either.
    I can go into the rotation software and rotate it manually.
    Any suggestions on how to get the button functioning again?
    Oh and I am running Vista Business with SP 2.
    Any help would be appreciated.

    Yes it does rotate it just wont rotate with the button once I turn it . also when I turn it to tablet mode it goes into portrait, I need it to go into secondary landscape. I made sure that the setting are set to secondary landscape and that the button is set to rotate. but it just wont. I have reinstalled the drivers for the rotation utility. any other ideas would be very helpful. thanks

  • Edit button not working in advanced mode

    When I choose a page layout that is pre- made in the options, I can then switch to the advanced mode, but can't get my edit button to work so I can edit the frames or pictures.  Any ideas why?

    Hi sewloco,
    I order to edit the picture/image when in Create mode, you can directly use the toolbar present on the left side in PSE10. You don't need to switch to Edit mode.
    You can also add a new frame/background/graphic from the Artwork Panel. You have a complete set of Effects and layouts available as well. If you want to add text, use the Text tool (press 'T').

  • Email Button not working with Eudora

    Hello!
    I have created a form in LiveCycle using an button that has Java on it to send an email.  I believe it is Choice #4 on Paul's list of email options.   When users with Eudora try to use the form it does nothing.  The form will not send or anything.  No error message either.  Any idea what the problem is?
    Thanks!
    Jodi

    This is what I am using on the button
    //Create a variable to hold the document object
    var oDoc = event.target;
    oDoc.mailDoc({
    bUI: true,
    cTo: "[email protected]",
    cSubject: Campus.rawValue + " - Voucher Payment Request - " + Name.rawValue,
    cMsg: "If you have any questions please contact Emily Lange"
    What would I have to change to make it HTML? 
    You also suggested that MAPI needs to be switched on.  Is this something that the user can do?  Or is this a global variable?
    Thanks!
    jodi

Maybe you are looking for