SharePoint Server 2010 can't connect to the Configuration Database
Hi Techys,
I have a SharePoint Server 2010 Farm, and I have Installed SharePoint SP1 package,
Then I,m trying to run the SharePoint configuration wizard, That time i have the below error.
"Can't connect to the Configuration Database"
I have checked all the services belongs to the sql server and SharePoint server.
here i found, SharePoint Timer service is automatically Stopped while browsing the Central admin url.
Please help me to resolve the above issue.
Many Thanks,
Madhu
What you mean error in Config wizard, could you please share the complete error log?
For Timer Services, check under which account it is running and check event log why its stoped?
for CA error there are couple of possible reason for this:
Make sure SQL related instances / services are running fine.
Make sure your farm admin account have permission on config DB.
Make sure Config Database Exist.
Make sure you can connect to SQL server from your APP /WFE.
If everything is running fine, then you may need to reconfigure the sharepiont products and technologies configuration wizard. The issues might be because of the update that might have installed some additional components for installation.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
Similar Messages
-
Hi all,
In advance i`m thankful for your help,
I come across a problem while migrating the Active Directory from Windows Server 2003 to Windows Server 2008 R2,
SharePoint 2010 is getting this error Cannot connect to the configuration database. The same goes for the Administrative page,
Nothing is change in the MySql database, same log in, same server name, i guess it have something to do with the SharePoint Farm,
My question is will reinstalling the SharePoint do the job? Or is there an easy way to get back on my old track?
I`ve try to sync users... no good
PS C:\Users\administrator.SERVERM> if($configManager.IsSynchronizationRunning()
-eq $false)
>> {
>> $configManager.StartSynchronization($true)
>> Write-Host "Started Synchronizing"
>> }
>> else
>> {
>> Write-Host "Already Synchronizing"
>> }
>>
Can someone explain a little bit more about this:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down)
Aleksandar Delcevski, Web-administrator School of Journalism and Public Relations Jurij Gagarin 17-1/1, 1000 Skopje, R. Macedonia t: + 389 2 3090 004 mob: +38972 257 565 [email protected]; www.vs.edu.mk; www.medium.edu.mk; www.unescochair-vs.edu.mkHiya,
I don't think it is necessary to reinstall.
You should just confirm that your basic infrastructure is working.
1: On the SharePoint server, open cmd and write ping <SQL server name>
2: On the SharePoint server, open cmd and write nslookup <SQL server name>
Basically the steps outlined here, is the best way to start:
6.
Can they talk to each other?
Verify that SharePoint is using the correct IP address for the SQL server. To do this, run the ping command on the Windows SharePoint Services server.
Verify that the SharePoint server is obtaining the correct IP address for the SQL server from DNS. To do this, run the
nslookup command from the SharePoint Server.
Make sure that there are no incorrect entries for the SQL server. To do this, examine the Hosts file on the SharePoint server. This file is in the following location:
%systemroot%\system32\drivers\etc\Hosts
On the SharePoint server, look for SQL client aliases. To do this, follow these steps: Click
Start, click Run, and then type cliconfg in the
open box.
Click the Alias tab. By default, there are no SQL client aliases. If you have any aliases for the SQL server, verify that they are correct, or remove them.
Open the SQL Server Configuration Manager (Start SQL Server 2008 Configuration Tools SQL Server Configuration Manager
Navigate to the SQL Server Network Configuration Protocols for MSSQLSERVER node in the tree view
Enable TCP/IP and Named Pipes (you’ll be warned that these changes will not apply until the service is shut down) -
SharePoint 2007:Cannot connect to the configuration database.
The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors:
Log Name: Application
Source: Office Server Search
Date: 2015/2/28 22:30:47
Event ID: 10034
Task Category: Gatherer
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Office Server Search" />
<EventID Qualifiers="49152">10034</EventID>
<Level>2</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
<EventRecordID>2323514</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name: Application
Log Name: Application
Source: Windows SharePoint Services 3
Date: 2015/2/28 22:30:50
Event ID: 5586
Task Category: Database
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows SharePoint Services 3" />
<EventID Qualifiers="0">5586</EventID>
<Level>2</Level>
<Task>484</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
<EventRecordID>2323517</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>64</Data>
<Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source: Windows SharePoint Services 3
Date: 2015/2/28 22:31:00
Event ID: 27745
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows SharePoint Services 3" />
<EventID Qualifiers="14130">27745</EventID>
<Level>2</Level>
<Task>1105</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
<EventRecordID>2323520</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C) 0x08FC Search Server Common
GathererSql 0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common UtilCommon
0 Monitorable Dumping error record [0]: Source: Microsoft OLE DB Provider for SQL Server HRESULT: 0x80004005 Code: 11 Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Cannot connect to the configuration database when App Server is down
Hi,
We had a App Server not come up after a restart.
When trying to access a site we get
the "Cannot connect to the configuration database"
We have now started the App Server and everything working again...
My problem, there are 2 WFE servers with NLB Configured apart of the App Server ....Why wont the site work and why cant i connect to config DB?
Something must be misconfigured? Sites should be connecting to the WFE servers and work if App server is down.
Yes, NLB Points to the WFE Servers.
Any ideas where i can look? This is a Project PWA Server, not sure if that will make a difference but the root SharePoint site had the same issue.
ThanksHi Danie,
is it possible that the SQL Server is running on the same box as the SharePoint (application) server? This would be the only thing that can explain the symptoms. Please check following:
IP address of the SharePoint Application server by typing nslookup AppServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
AppServerName with the FQDN of the application server, e.g. appserver.domain.local
IP address of the SQL server by typing nslookup SQLServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
SQLServerName with the FQDN of the SQL server, e.g. sqlserver.domain.local
SQL Server alias configuration by checking the entries in the cliconfg.exe on both SharePoint WFEs
In most cases, SQL server has nothing to do with the SharePoint Application server role and it is stored on the separate box. My guess here is that the farm started as one-server farm setup and over the time got expanded by additional 2 WFEs, moving
Web Server roles from the initial server, leaving it with the application role (service applications) and SQL server on the same box.
But, I am just making an educated guess here. Can you provide some additional information?
Hth,
Aleks -
Cannot connect to the configuration database
I tried to configure my server with active directory after I have successfully configured sharepoint . For a mistake , they made me delete the active directory and now when I try to connect to the admin section or site page it me give the following error :
"Cannot connect to the configuration database"
Deleting the active directory ; I noticed that all the other users have disappeared and the service : SQL AGENT ( Sharepoint ) not run and the error is :
" This installation of SQL Server Agent is disabled. The edition of SQL Server that installed this service does not support SQL Server Agent." Thank you for the HelpWas the active directory server that you removed the last active directory server in the farm? If so then your only two real choices are to rebuild everything from scratch or restore everything from backup.
If it was just that you were trying to make the SharePoint server into a Domain Controller, then I still think you may need to rebuild. But you can try re-adding the SharePoint server to the Domain. It may have lost its Domain membership when you removed
AD from it and gone back to being a standalone server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Cannot connect to the configuration database Error in HTTPS
Hi
We have a SharePoint 2010 farm ,with more then 20 web application running . I am getting "Cannot connect to the configuration database" error in one web application when we browse through https
The same application is working fine when we browse through http . I am using AAM i have 2 web server which is been network load balanced and the https traffic comes through F5
Kindly help to resolve the issue
PrabakarHI Prabakar,Check the below URL that exactly related to the issue.
http://expertsharepoint.blogspot.de/2014/05/cannot-connect-to-configuration-database.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Can't Connect to the Mysql Database using J2SE jdk1.5
Can anyone tell me why this error occurs ????????????????????
Following are the codes ;
package dbconnect2;
import java.sql.*;
public class dbconn2 {
public static final String URL =
"jdbc:mysql://localhost:3306/test";
public static final String USERNAME = "test";
public static final String PASSWORD = "password";
* @param args the command line arguments
public static void main(String[] args) throws Exception {
// TODO code application logic here
Connection connection = null;
try {
Class.forName("com.mysql.jdbc.Driver");
connection = DriverManager.getConnection(URL,
USERNAME, PASSWORD);
Statement stm = connection.createStatement();
ResultSet rs = stm.executeQuery("select * from emp");
while (rs.next())
String strnaam = rs.getString("emp_name");
System.out.println(strnaam);
finally {
if (connection != null)
connection.close();
================================================================================
This is the run time error ;
init:
deps-jar:
compile:
run:
Exception in thread "main" java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at dbconnect2.dbconn2.main(dbconn2.java:39)
Java Result: 1
BUILD SUCCESSFUL (total time: 2 seconds)
please help me to sort this out
Thanks
SishaniI've solved the DW problem by changing the site folders from
'db' to 'wwwroot' e.g. 'C:\CFusionMX\db\' is now
'C:\CFusionMX\wwwroot\
However I'm now back to my original problem. I've lost my
mqysql connection in CF Adminstrator. Before I made these changes I
could connect to my mysql databases using the following settings:
JDBC URL: jdbc:mysql://localhost:3306/test
Driver Name: MySQL Connector J
using the following Java path and file:
C:\CFusionMX\wwwroot\WEB-INF\lib\mysql-connector-java-3.0.17-ga-bin.jar
Now these settings give me the following error:
"Connection verification failed for data source: javaserver
[]java.sql.SQLException: SQLException occurred in JDBCPool
while attempting to connect, please check your username, password,
URL, and other connectivity info.
The root cause was that: java.sql.SQLException: SQLException
occurred in JDBCPool while attempting to connect, please check your
username, password, URL, and other connectivity info"
Any suggestions on this would also be welcome.
Thanks again to everyone for their help.
Sincerely,
Graham A. Kerby -
Can't connect to the window application server.
I have installed the Sun Secure Global Desktop Software 4.2,
the client can connect to the unix application server but can't connect to the window applicaiont server.
What can i do?
Thank you.Hi.
Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
netstat -n
command as to see if port 3389 is listed in LISTEN state.
Best,
Rob -
Pb to connecting to the demo database
hi ,
i'm newbie :)
i have just installed TimesTen with demo ,
i can't see how can i connect to the demo database in the command line (i'm on Linux)
what's the name of the demo database ?
thanks for help
:)Y.Brunet, I can not be as sure in my words as you are, since I don't know how other companies and programmers solve these problems, but I cannot easily accept your advice to code dates as Strings.
In our company's projects everywhere in DB handling code we use PreparedStatements because AFAIK they provide better performance than CallableStatements if frequently used. Also they provide abstraction level - why should I know how the f!@# the Database expects dates/int/float/String... in SQL statements?
We use several DB servers - M@SQL, Access, Oracle, Ingres - they all handle dates in different way(not to mention that in most DBs date format is customizable). But code written for one server works on others (most of it, of course) because of this level of abstraction.
Let's leave the driver format the stuff as the DB expects and concentrate on the real work - pass correct values, perform logical checks, improving performance.....
Mike -
I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
unavailable"
PS I tried a lot of solutions from different articles, but the same result.
presented below my environment:
Two Lync 2010 frontend servers with one pool.
Two edges server.
HW load balancer.
Log from Lync connectivity analyzer.
User Name: [email protected]
Logging test parameters:
SIP Uri: [email protected]
Discovery Type: Automatic Discovery
Network access: NetworkAccessExternal
Selected client: ApplicationLyncMobile2010
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
Sending HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for unsecure (HTTP) internal channel
Sending HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscoverinternal.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured internal channel against
http://lyncdiscoverinternal.xxx.com/
Starting automatic discovery for secure (HTTPS) external channel
Sending HTTP request to
https://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting, try using a browser to open the server discovery URL
https://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured external channel against
https://lyncdiscover.xxx.com/
Starting automatic discovery for unsecure (HTTP) external channel
Sending HTTP request to
http://lyncdiscover.xxx.com/[email protected]
Exception encountered while sending an HTTP request to
http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
An error occurred while sending the request.
Unable to connect to the remote server
An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
For troubleshooting, try using a browser to open the server discovery URL
http://lyncdiscover.xxx.com/[email protected]
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
by its access permissions 192.168.89.25:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured external channel against
http://lyncdiscover.xxx.com/
None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
Automatic discovery of the Lync server failed. Please verify the server requirements at
http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.Hi
Is that Port 443 opened? check the fire wall.
is that external Lync clients are logging in with out any issues.
by seeing the Log it is unable to connect on port 443
Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
to access a socket in a way forbidden by its access permissions 192.168.89.25:443
For troubleshooting the Mobility issues follows this
http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question. -
Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
SwanlPlease verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply. -
I am Facing problem with "Send to connection" in SharePoint Server 2010.
Hi all,
I am working on SharePoint Server 2010
I have a site collection and sub sites in it.
I want to move the document form one site library to another site library.
Since it can be done by configuring, Send to connection in Central Admin.
I activated Content Organizer rules in both the sites.
I added new connection for one site and append the url
/_vti_bin/officialfile.asmx
I tested the url on clicking
Click here to test link it gives me message that
"URl is a Valid routing Destination".
and finally I added the connection
After configuring this I open the other site and uploaded a document in it and after uploading the document I selected send to
option and clicked on my connection what I created in central admin.
But it gives me error: The site could not be found or accessed
Please help me for this...
Thanks in advance..
Faheem AhamedHi,
In my case, I'm routing an InfoPath form (After having approved) to an archived Forms Library within the same sub-site.
I created Send To connection, setup Content Organizer rules, setup Record Retention policy on the source Forms Library, but even after running both the Timer jobs (Information management policy and Expiration policy), the document didn't get moved to the
archived library.
I checked under Compliance details of the form that the Scheduled occurrence date shows 'Completed' i.e. the Information management policy timer job did its task, but the other Timer job didn't move this form.
Then I tried sending this form manually using Send To. In that case, although the form got moved to the archived library, but I see 'Unexpected error' on the screen.
The ULS shows following entries:
<nativehr>0x80070057</nativehr><nativestack></nativestack>Invalid data has been used to update the list item. The field you are trying to update may be read only.Possible mismatch between the reported error with code = 0x8107210c
and message: "Invalid data has been used to update the list item. The field you are trying to update may be read only." and the returned error with code 0x80070057.
OfficialFile: File
http://server/sites/site/SourceFormsLibrary/InfoPathForm.xml was not saved at router location TargetLibrary. Exception <nativehr>0x80070057</nativehr><nativestack></nativestack>Invalid data has been used to update the list item.
The field you are trying to update may be read only. thrown at: at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion,
Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties,
Boolean bCheckOut...
Critical --- The
http://server/sites/site/_vti_bin/OfficialFile.asmx site is not properly configured for this request.
Can somebody tell how manual Send To is working within the same site collection.
Any help will be appreciated!
Thanks!
Ashish -
Did not find the PerformancePoint Services in sharepoint server 2010
Hi Friends,
i have just installed the sharepoint server 2010 in my computer. i want to use it to make scorecards. but i did not find the Performance services in Central administration (services on server)
anyone can help me with this?
QearlPerformancePoint services are available only if you have installed Enterprise edition of SharePoint. If you have installed Standard or Foundation, then PerformancePoint is not available.
Marek Chmel(MVP SQL Server, MCSE SharePoint 2013, MCT, CCNA,CCDA)
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. -
How to deploy the new version of webPart in SharePoint Server 2010
Hi friend's ....I want to deploy the new version of webPart in SharePoint Server 2010. Is there any way for this....? In SharePoint sever 2013 there is version feature available for the apps..Same thing i want in SharePoint Server 2010 for webpart. Please
suggest me....is it possible or not ..?i am not aware if their is new version option rather i know instead of retract and Re install, you can simply update the solution.
check this: http://blogs.southworks.net/aortega/2010/02/05/sharepoint-2010-how-to-deploy-custom-webparts/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Does the CreateFirefoxOnWindowsPlugin JS function works in Sharepoint Server 2010
Hello,
I read the plug-in documentation of FFWinPlugin Plug-in (http://msdn.microsoft.com/en-us/library/ff407576.aspx ).
This article specifies that this applies to Sharepoint Foundation 2010 but
does it also applies to Sharepoint
Server 2010?
Thank you.
Kind RegardsHi,
According to your post, my understanding is that you want to use FFWinPlugin Plug-in in SharePoint 2010.
Per my knowledge, the CreateFirefoxOnWindowsPlugin JS function works in Sharepoint Server 2010.
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/office/en-US/280bf2b2-fe35-4d46-94cf-168f5b387fde/configuring-ffwinplugin-to-enable-firefox-integration?forum=sharepointdevelopmentprevious
In addition, I recommend that you can use IE Tab in Firefox.
For more information, you can refer to:
https://addons.mozilla.org/en-US/firefox/addon/ie-tab/
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Maybe you are looking for
-
How do i backup the list of load images automatically exceptions under Options->Content. I want to transfer to another comp without re-adding one at a time. EVen if there is no way to backup, what is the system file for Firefox that stores these, so
-
MP3 CDs from iTunes on stand-alone DVD players
I was reading a couple of threads in this forum on that topic and here are my observations: Until now I have been burning MP3 CDs in iTunes only as a backup, not for actual listening. Recently we have purchased a rather cheap stand-alone Grundig DVD
-
How do I add games to my ipod????
I tried everything i could, but i have no idea how to get a game onto my ipod after download
-
Hello @ll, I am new to ABAP and I got a task to modify functionality of an Include.There are somany loops and if,case etc., conditions in it ....My Question is how to check the code its almost around 1500 lines code...How to check the each loop a
-
No keyboard when installing Windows XP on Satellite P300 PSPCCA
Ok I just got my new 500GB HDD and slipstreamed XP with the SATA drivers so XP can see the HDD and that part works fine. But now after XP loads its files and I get to the part where you can choose between setting up XP on the selected partition (ENTE