SharePoint Server 2013 Upgrade failure after Updating SP1 + Nov10 CU " Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown"
After Successfully having SharePoint Server 2013 Farm Installation on 2 Servers AD + Central Admin Application server, OS: win server 2008 R2 Ent SP1.
I set up the configuration for SharePoint app and Workflow Manager to work properly on the Den environment, the time for SP1 running has come and after downloading the Service pack 1 of SharePoint server 2013 and completing the wizard, I run the SharePoint
2013 Configuration Wizard after installing SharePoint 2013 SP1, and the wizard failed on step 2 with the Error from the Log file as showing below,
"Task upgradebootstrap has failed with an unknown exception
01/04/2015 00:43:30 11 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown.
at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()"
Also I was not able to create websites like before, and the creating of new site is failed with error message :
"Failed to call GetTypes on assembly Microsoft.Office.TranslationServices, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Method not found: 'Microsoft.Office.Web.Common.ProcessImageInfo"
Is there any solution to my problem with SP1 of SharePoint Server 2013, I don't think that SP1 should generate such bugs in a stable environment.
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.
Hi Basel,
What edition of SharePoint do you have and what patch did you attempt to install?
If you are on SharePoint 2013 Enterprise, please make sure you are installing Service Pack 1 for SharePoint Server:
http://www.microsoft.com/en-us/download/details.aspx?id=42544
If you are on SharePoint 2013 Foundation, please make sure you are installing Service Pack 1 for SharePoint Foundation :
http://www.microsoft.com/en-us/download/details.aspx?id=42548
For more information, you can refer to the thread:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/ba9656e9-837e-4261-b164-b5bdfe8adce3/why-does-machine-translation-fail-when-i-do-not-use-it?forum=sharepointgeneral
http://sharepoint.stackexchange.com/questions/84284/failed-to-call-gettypes-on-assembly-microsoft-office-translationservices
Best Regards,
Eric
Eric Tao
TechNet Community Support
Similar Messages
-
I has successfully setup new Dev ENV of SarePoint server 2013 in VMware with 2 servers running om OS: win server 2008 R2 Ent SP1, AD + Central Admin Application Server.
After that the configuration of SharePoint App and WorkFlow Manager completed as well and many projects run perfectly,
And after installing SP1 of SharePoint server 2013, and running the SharePiont Configuration wizard to complete the configuration of the SharePoint Farm the Upgrade has fialed on Step2 with the following Error from the Log file:
Task upgradebootstrap has failed with an unknown exception
01/04/2015 00:43:30 11 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown.
at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Also after that I was not able to create like before a new site , and this creating end with error message as follows:
Failed to call GetTypes on assembly Microsoft.Office.TranslationServices, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Method not found: 'Microsoft.Office.Web.Common.ProcessImageInfo.
Is there any solution to my problem with SharePoint server 2013 SP1, this supposed not to cause any bug in stable environment.
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.Hi Daniel,
Thanks for replying on my post, actually I have downloaded the kb2880552 sp1 for
enterprise edition from the link
https://support.microsoft.com/kb/2880552 , and this has been experienced with me before since I had my Standalone Dev machine first installation, and the issue only occurred when the SP1 installed though.
Anyway, I've tried to install CU Nov 2013 http://support.microsoft.com/kb/2889944
but still facing the same issue,
I run the Setup of SP2013 from the CD to repair the SharePoint and error message appears,
The issue related to "Microsoft.Office.TranslationServices" is also related to running
the repair successfully which leads to the same error message above.
The Version of SP 2013 from the program file is : 15.0.4571.1502
The Update snapshot is as below:
Is there a problem with my sharepoint media file?
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS. -
Sharepoint server 2013 configuration issue - failed to create configuration database
Hi All,
I have installed the SharePoint server 2013. After installing the SharePoint products, the configuration stops at failure of creating configuration database.
Some system configuration & info:
- 1 Domain controller server run Active Directory services on Windows server 2008 R2 SP1 (PC1 with name DC.Brainfiniti.com)
- 1 Server which is used for installing Sharepoint server 2013 and MS SQL server 2008 R2 SP1 (PC2 with name App.Brainfiniti.com)
- All of PCs were satisfied the requirement of Sharepoint server 2013
- Firewall turned off & No antivirus tool was installed.
- During installing of Sharepoint, choose "Complete" option: Farm mode and use SQL Server instead of SQL Express.
- During configuration, created a new farm with a domain user account.
- Use domain account to log on and install, configure in Sharepoint & SQL server (PC2)
ATTEMPTS:
1. Tried install and set up all of steps with just 1 account - domain administrator.
2. Tried with separate domain account:
- SQL Service account use for:
+ Install SQL server 2008
+ Connect all SQL services
+ Admin for SQL server
- Setup account use for:
+ Member of local administrator group in PC2
+ Install Sharepoint
+ Run Configuration wizard
+ Was granted permission in SQL database: dbcreator, securityadmin, sysadmin and deselect serveradmin role.
+ Was choose for the database account in configuration database step
Also tried with SQL service account in this step.
3. Tried with Standalone mode for Sharepoint installing
4. Trie with domain name: Brainfiniti.local
5. Tried with some another solution from topic relate to database configuration in our community but not successful.
But all attempts are failed at this configuration database step :'(
Please correct me if I am going wrong by missing something or do I need to start/install some services.
Screenshot Attached
Sorry! Cannot add screenshot because my account is still not verified. Will add later.
LOG ENTRY:
01/23/2013 06:58:28 1 INF Entering function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
01/23/2013 06:58:28 1 INF Found a task by the name of adminvs in the task collection
01/23/2013 06:58:28 1 INF Entering function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:28 1 INF Entering function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Entering function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Trying to start service W3SVC and waiting 180 sec to do so
01/23/2013 06:58:28 1 INF service W3SVC is Running, nothing to do
01/23/2013 06:58:28 1 INF starting service W3SVC (it may already be started)
01/23/2013 06:58:28 1 INF Leaving function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Leaving function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Trying to see if port 40993 is free on machine APP. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF A SocketException was thrown with
SocketError ConnectionRefused
01/23/2013 06:58:30 1 INF Connect has been refused for port 40993, so we will consider this a free port
01/23/2013 06:58:30 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF Adding port 40993 to the exclusion list so it is not chosen again during this run
01/23/2013 06:58:30 1 INF Leaving function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:30 1 INF Leaving function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
I just post a part of its logs which contain "error" string because it's too long.
According this log, there is a error in port connection but i've turned firewall off ???
Please help me with this mix up :'(
p/s: sorry for my English!
Thanks,
Hien HoangBelow is the logs entry with "ERR" marked line:
01/23/2013 07:03:17 9 INF Now joining to farm at server app.brainfiniti.com database SharePoint_Config
01/23/2013 07:04:12 9 ERR Task configdb has failed with an unknown exception
01/23/2013 07:04:12 9 ERR Exception: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not
be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 ERR An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception
information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Creating the OnTaskStop event for task configdb
01/23/2013 07:04:12 9 ERR Task configdb has failed
01/23/2013 07:04:12 9 INF friendlyMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 9 INF debugMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Firing the OnTaskStateChanged event for task configdb
01/23/2013 07:04:12 9 INF Entering function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName
for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName
is configuration database
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Received an TaskStateEventHandler event. task:configdb TaskBase.State:stopped
01/23/2013 07:04:12 9 INF Entering function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Incremented the number of tasks failed to 1
01/23/2013 07:04:12 9 INF Leaving function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Task configdb has stopped and failed. Total failed is now 1
01/23/2013 07:04:12 9 INF Leaving function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Invoking the UI thread with the task state chagne event
01/23/2013 07:04:12 1 INF Entering function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 1 INF Received an TaskStateEventHandler event. task:configdb
TaskBase.State:stopped TaskBase.TaskResultconfigdb
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 ERR Task configdb has stopped and failed. Total failed
is now 1
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
disconnect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter disconnect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
connect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter connect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
create
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter create in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
for language English (United States)
01/23/2013 07:04:12 1 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
is Failed to create the configuration database.
01/23/2013 07:04:12 1 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Updating the task label below the progress bar Failed to
create the configuration database.
01/23/2013 07:04:12 1 INF Entering function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Leaving function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Last message from task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Updating the task additional notification information below
the progress bar An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Leaving function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 9 INF Sleeping an extra 1 ms so things don't go too fast for the user for this
task
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background with our
trademarked image
01/23/2013 07:04:12 9 INF Leaving function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Leaving function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Leaving function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Leaving function TaskThread.ExecuteTask
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName for language English (United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName is configuration database
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Task configuration database failed, so stopping execution of the engine
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key disconnect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter disconnect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key connect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter connect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key create
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter create in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel for language English
(United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel is Failed to create the configuration
database.
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Failed to create the configuration database.
An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 4 INF Entering function TaskDriver.NotifyTaskSummary -
After installing Project Server 2013 (without updating SharePoint Server 2013 SP1))
I am facing the problem while opening project web app. I configured the SharePoint 2013 and project server 2013. Here is the detail what I performed the steps:
OS Server 2012 R2, SQL Server 2012, SharePoint server 2013 version
15.0.4420.1017, Project Server 2013 version
15.0.4454.1000. SharePoint configured and running successfully. After project web app site provisioning successfully completed. I got the below error.
Microsoft.Office.Project.PWA.WebParts.PWAPart' from assembly 'Microsoft.Office.Project.Server.PWA, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' cannot reduce access.
I run this psconfig -cmd upgrade -inplace b2b -wait -force. But still getting same error.
Previous steps:
Earlier I had also tried to install SharePoint Server 2013 SP1 "3823428". After the installation SP1 some of sharePoint site features suddenly stopped e.g: Cannot browse "Service Applications -->
Manage service applications" option even after re-start the server. This was previous error after upgrading SP1
"Method 'get_IsClientValid' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy' from assembly 'Microsoft.SharePoint.WorkflowServices,
Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' does not have an implementation"
Anyone can help me!!! Thanks...
Faisal Numanhello,
For SP2013 and PS2013 to work properly on Windows Server 2012 R2 you need to use the SP1 install media for both, download SharePoint 2013 with SP1 and Project Server 2013 with SP1
http://support.microsoft.com/kb/2891274
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
After Project Server 2013 SP1 update (without updating Sharepoint Server 2013)
I get this error entering the PWA root:
Derived method
'RequiresWebPartClientScript' in type
'Microsoft.Office.Project.PWA.WebParts.PWAPart' from assembly
'Microsoft.Office.Project.Server.PWA, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' cannot reduce access
SharePoint Server 2013 version: 15.0.4420.1017
Project Server 2013 version: 15.0.4569.1506
There is no SP1 uninstall process? Totally lost!Hi Ximet,
If you go to Central Administration > System Settings > Manage Servers in this Farm. Do you see Upgrade Available for the servers.
If they show Upgrade Available, can you run the SharePoint Config Wizard one more time or you can also try running the command "psconfig -cmd upgrade -inplace b2b -wait -force"
Just curious to know if the issue is because the binaries have not been updated properly.
In case the issue persists and is impacting your business, I would suggest that you raise a support ticket with Microsoft so that we can further assist you on the case.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management
Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading the thread. -
SharePoint Server 2013 farm software updates not available in SCCM
At my current customer, we are currently switching over to SCCM for all Software Update Management.
For now, the only issue we are experiencing is that we do not receive SharePoint updates on our SharePoint Server 2013 farm. With WSUS we can detect these, but they are not listed in SCCM. We sync directly with Windows Update.
It are specifically the updates that are marked as "farm-deployment", as you can see in example in this image.:
http://2.bp.blogspot.com/-gI8Ew7RlY0g/VPqM0QUn6oI/AAAAAAAAIDQ/S1Ufp0x-mSU/s1600/windows%2Bupdate%2Bincludes%2Bsharepoint%2B2013%2Bpatches.png
In the SUP properties, we have enabled the Office 2013 product and all classifications besides "Tools".
Am I missing something?I could see these SharePoint updates in my SCCM console.
N.B. the question was about "farm-deployment" updates specifically.
Can you please post a screen-shot showing these updates in the SCCM-console?
This is from WSUS:
Rolf Lidvall, Swedish Radio (Ltd) -
Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working
Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2 at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue. This seems also to be a SP set up issue.
Thanks a lot.Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks. -
SharePoint server 2013 Search Service App on Windows server 2012 R2 not working
Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM
was set up to access the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate
to search service app admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is
in a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem
with Search Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.
Thanks a lot.Hi,
According to your post, my understanding is that SharePoint server 2013 Search Service App did not work on Windows server 2012 R2.
Please make sure you configure Search Service Application correctly. You can refer to:Create and configure a Search service application in SharePoint Server 2013
I recommend to created new Search Service Application, and made a full crawl. Then assigned the new SSA as the default SSA for webapplications. Finnlay checked the issue doesnt occur now,
If all search related components now are online, to keep the enviroonment clean, you can delete the old SSA.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
SharePoint Server 2013 Search Box has disappeared
Hi guys,
SharePoint Server 2013 Search Box has disappeared and not showing on any sites. Even when I try to go to Search centre site I get an error "sorry something went wrong...
Web Parts Maintenance Page: If you have permission, you can use this page to temporarily close Web Parts or remove personal settings. For more information, contact your site administrator. "
My search SA is working fine and crawl running with no error. It seems like there was same issue on SP foundation 2013 where there is fixed released for that:
https://support.microsoft.com/kb/2760625?wa=wsignin1.0
But I have SP Server and i can confirm that I have installed SP1 (KB288055) in my farm.
I wonder if I need to install any CU to fix this.... I haven't installed any CUs in my farm yet.
Shall I go for Feb 2015 CU update or Sept 2014 CU? or is there any fixes for that with no CU or I need to install my farm from the scratch....
Please help.
Any advice greatly appreciated.
BalaiPYou have deactivated SharePoint Search from center Admin.
Please activate it
Regards, Sachin -
SharePoint Server 2013 - Document file search
HELP! HELP! HELP! HELP!
I am using SP Server 2013. My environment consist of SP server and SQL 2012 database server. I have 3 site collections under one web application http://sharepoint1/
I am having problems with results not being returned on recent uploaded documents when I attempt to search for a file inside the document webpart. Here are my steps:
1) Started a continuous full crawl on my local sharepoint sites...content seems to be crawling just fine
2) After I upload new files to document library, I go to advance settings to reindex the files.
3) I attempt to do a search on the docs that were recently uploaded, but I get a "your search returned no results".
4) I am able to get results back from documents that I uploaded two weeks ago.
I have documents inside their respective folders. Whichever site collection I am in, I want to be able to do a search on files.
My boss has specifically advise me to stay away from enterprise features. I can not enable or activate features that will swing us over to the enterprise license.
The search seems to be partially working since I am getting returns on older uploaded docs. What am I doing wrong or missing. Please provide 'How-to" links or resources on setting up search application the correct way.
Help is greatly appreciated!!!
artisticwebThe default continuous crawl interval is 15 minutes. Do the files appear in search results after 15 minutes from uploading?
If so, you can increase the frequency to a maximum (minimum?) of 1 minute. To set the interval, check out Manage continuous crawls in SharePoint Server 2013
From an elevated SharePoint Management Shell, run:
$ssa = Get-SPEnterpriseSearchServiceApplication
$ssa.SetProperty("ContinuousCrawlInterval",1)
(If you have more than one Search Service Application you'll need to filter accordingly)
Update: Another thing worth looking into -- which patches have you applied to the farm, what is the farm's build version? Earlier releases had search issues that have been fixed in later updates.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
SharePoint Server 2013 - very slow in loading pages (frontend)
Hello, I have a problem.
I have install a SharePoint Server 2013 Enterprise. The enviroment:
1. Web-Front-End Server with 4 Core, 12 GB RAM, SSD (WS2012, SharePoint 2013 RTM + CU March 2013)
2. Backend SQL Server 2012 with 3 Core, 10 GB RAM, SSD (WS2012 + last Update)
The central administration page works fine, how sharepoint 2010.
The problem, when I access a web application, every site (main site, sub site, document library, ...), every action need 2 - 3 seconds. On the right side is the popup information "is in work ...". No CPU or SSD/HDD usage.
I have found the problem in the internet, but no solutions work.
http://social.technet.microsoft.com/Forums/en-US/sharepointitpropreview/thread/16cebde9-da9e-43a2-9d6a-656693ab65c5
http://social.technet.microsoft.com/wiki/contents/articles/14287.sharepoint-2013-how-to-improve-speed-on-sharepoint-2013-en-us.aspx
1. I have set the maximum of the noderunner from 0 to 128 (no solution)
2. I have disable the two search services (no solution)
3. I have export and import the trusted root certificate for the 3 certificates for sharepoint, no solution.
I need help. Does anyone know the problem?Hello, I have check with the dashboard. You can see, with "Wiki Edit Render" the start time is after 6000 ms. The job befor by 107 ms. And this is the wait time from 6 seconds, what I have by every page and site action.
ComputerBereichsnameStartzeit (ms)Dauer (ms)CPU (ms)
servername VBeginRequestHandler 000
servername VSPFederationAuthenticationModule.OnAuthenticateRequest::WifCodeCall 100
servername VSPClaimsCounterScope 132
servername VSPSam.OnAuthenticateRequest::WifCodeCall 132
servername VSPChunkedCookieHandler.ReadCore::WifCodeCall 100
servername VSPChunkedCookieHandler.ReadCore 110
servername VGetWindowsUserKey: Translate NTAccount to SecurityIdentifier 210
servername VSPSam.OnSessionSecurityTokenReceived::WifCodeCall 400
servername VSPSam.AuthenticateSessionSecurityToken::WifCodeCall 400
servername VSPSam.SetPrincipalFromSessionToken::WifCodeCall 400
servername VSPClaimsCounterScope 410
servername VMatching per user conditions for ULS boosting 500
servername VPostAuthenticateRequestHandler 500
servername VSPFederationAuthenticationModule.OnPostAuthenticateRequest::WifCodeCall 510
servername VSPSam.OnPostAuthenticateRequest::WifCodeCall 600
servername VPictureHttpModule: ProcessPictureRequest 600
servername VPublishingHttpModule: PostAuthorizeRequestHandler 600
servername VPostResolveRequestCacheHandler 64020
servername VGetWebPartPageContent 103517
servername VGetFileAndMetaInfo 103516
servername VSPSqlClient 10340
servername VSPFileStreamManager_From_Native 41319
servername VCreateStreamFromRowset 4110
servername VPublishingMobile: Resolve the default or non-default channel custom master url token. 4700
servername VSearchBoxScriptWebPart::OnInit 5311
servername VScriptApplicationManager 5310
servername VSearchCommon::GetCurrentSiteProperty 5300
servername VSearchCommon.GetSearchCenterUrl 5310
servername VSearchCommon::GetCurrentSiteProperty 5310
servername VEnsureListItemsData 553218
servername VSPSqlClient 61239
servername VWiki Edit OnInit 9110
servername VWiki Edit OnInitComplete 9200
servername VWebparts hinzufügen 9200
servername VWiki Edit OnLoad 9200
servername VToolBarMenuButton.CreateChildControls for PersonalActions 9400
servername VToolBarMenuButton.CreateChildControls for SiteActions 9700
servername VIsCheckedOutToSystem 9910
servername VSPPageStateControl:OnLoad 10000
servername VActivate web part connections 10000
servername VWiki Edit OnPreRender 10010
servername VSPPinnedSiteTile Control CreateChildControls 10100
servername VSPSqlClient 10300
servername VSearchBoxScriptWebPart::OnPreRender 10421
servername VSearchBoxScriptWebPart.OnPreRender 10421
servername VSearchCommon.GetSharedSearchBoxSettings 10410
servername VSearchCommon::GetCurrentSiteProperty 10400
servername VSearchCommon::GetCurrentSiteCollectionProperty 10500
servername VSearchCommon.GetSharedSearchBoxSettings: service level 10500
servername VSearchCommon.GetSearchCenterUrl 10500
servername VSearchCommon::GetCurrentSiteProperty 10500
servername VScriptWebPart.OnBeforeSerializeToClient 10510
servername VSPPageStateControl:OnPreRender 10610
servername VWiki Edit OnPreRenderComplete 107 1 1
servername VWiki Edit Render 6146 26 25
servername VPublishingMobile: Resolve the default or non-default channel custom master url token. 614600
servername VRobotsMetaTag Control Render 615100
servername VProjectProperty Control Render 615110
servername VListItemProperty Control Render 615200
servername VSPShortcutIcon Control Render 615200
servername VCSSLink Control Render 615200
servername VScriptLink Control Render 615232
servername VScriptLink Control Render 615510
servername VScriptLink Control Render 615600
servername VScriptLink Control Render 615600
servername VScriptLink Control Render 615600
servername VCustomJSUrl Control Render 615600
servername VSoapDiscoverLink Control Render 615600
servername VRssLink Control Render 615610
servername VCSSRegistration Control Render 615700
servername VImageLink Control Render 615700
servername VSPNoScript Control Render 615700
servername VSPClientIDGenerator Control Render 615700
servername VSharePointForm Control Render 61571110
servername VMenüband rendern 615954
servername VSPTitleBreadcrumb Control Render 616500
servername VSearchBoxScriptWebPart::RenderWebPart 616511
servername VScriptWebPart.OnAfterSerializeToClient 616600
servername VListItemProperty Control Render 616610
servername VSPRibbonButton Control Render 616700
servername VSPRibbonButton Control Render 616700
servername VSPRibbonButton Control Render 616700
servername VFormDigest Control Render 616800
servername VPreSendRequestHeaders 617210
servername VEndRequestHandler SharePointEndRequest 617300
servername VLogRequestUsage 617300
servername VEndRequestHandler SPRequest Disposal 617311 -
Schedule SharePoint Server 2013 discoveries along with SharePoint Foundation 2013 discoveries
Hi
So I'm trying to add the SharePoint Server discoveries in SCOM 2012 - pasted the code straight of the MS guide into the config file:
<Workflow Id="MOSSInstallation.Discovery;WACInstallation.Discovery;SearchExpressInstallation.Discovery;SearchStandardInstallation.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery"
Times="1" />
<Workflow Id="SPService.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
<Workflow Id="SPSharedService.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
<Workflow Id="SPSharedService.Discovery.WAC" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
However when I run the "Configure" Task I get the following error: (NOTE - I discovered that the Dir "Monitoring Host Temporary Files 28803\2522979" does not even exist - )
The Event Policy for
the process started at 8:13:26 AM has detected errors in the output. The
'StdErr' policy expression:
.+
matched the
following output:
Exception calling
"GetDiscovery" with "1" argument(s): "An object of
class ManagementPackDiscovery with ID fedca251-56d5-be00-d6af-9cae645d6f36 was
not found."
Failed to find
workflows WSSInstallation.Discovery in Microsoft.SharePoint.Foundation.Library
Command executed:
"C:\Windows\system32\cmd.exe" /c powershell.exe -NoLogo -NoProfile
-Noninteractive "$ep = get-executionpolicy; if ($ep -gt 'RemoteSigned')
{set-executionpolicy remotesigned} & '"E:\Program Files\System Center
2012\Operations Manager\Server\Health Service State\Monitoring Host Temporary
Files 28803\2522979\AdminTask.ps1"'
'Microsoft.SharePoint.Foundation.Library.mp.config'"
Working Directory:
C:\Program Files\System Center Management Packs\
One or more
workflows were affected by this.
Workflow name:
Microsoft.SharePoint.ConfigSharePoint
Instance name:
Microsoft SharePoint Farm Group
Instance ID:
{6CB0A80D-D833-26EA-13C1-0CA48A57F5E2}
Management group:
Error Code:
-2130771918 (Unknown error (0x80ff0032)).
If anyone has any ideas that would be great -
JHello Jon,
Thank you for your question.
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Issue while installing Ms Project Server 2013 on MS Server 2012 R2 with Sharepoint Server 2013
Hello MS Support Team,
I installed SQL server 2012 & Sharepoint server 2013 and after that the MS project Server 2013 is not installing on the same server -- pls hv a look the enclosed screenshot. sent at [email protected] and guide me to resolve it on priority.
A windows poped up - Installation Error - This Project requires MS Sharepont Enterprise edition... (Which is not available on the MSDN Server)..only standard edition available.
Please reply asap @ [email protected] - Call @ 0120471384
Kind Regards,
Vinay Bhardwaj
Network System Administrator - GREC (IN)
Rockwell Automation | A-66, Sector 64 | Noida | India
LISTEN. THINK. SOLVE
IP : 71384 | E : [email protected] | W : www.rockwellautomation.comHi Siriosus,
Indeed you do need Sharepoint Server 2013
Enterprise for Project Server 2013.
See article below where it is mentionned:
Project Server 2013 requires the Enterprise edition of SharePoint Server 2013. Prior versions of SharePoint Server and SharePoint Foundation 2013 are not supported.
http://technet.microsoft.com/en-us/library/ee662114(v=office.15).aspx
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Sharepoint Server 2013 Search Issue
Hi,
running Sharepoint server 2013. search service application is not working properly. getting the below error message.
"Unable to retrieve topology component health states. This may be because the admin component is not up and running"
we have 2 tier sharepoint 2013 farm architecture. please find the below server details.
1. WFE & APP server (OS: Windows Server 2008 R2 SP1 and RAM: 8 GB)
2. database server (OS: Windows Server 2008 R2 SP1 and RAM: 8 GB)
I tried the following:
- installed the latest sharepoint server 2013 CU.
- OS is up to date.
- deleted and recreated Search Service Application
- The service account does have access to the search databases
- one account is used, domain\sp2013search, has all necessary permissions
Please help to fix the search issue.Hi Raj0639,
According to your description, my understanding is that you got an error when you run SharePoint 2013 Search.
Firstly, please make sure that all servers are online, and connecting to others.
Please stop all search services on Manage services on server, then restart them. Please try to do as Amit said, compare the result.
If this issue still exists, please repair SharePoint 2013 under Control Panel, then compare the result.
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/a67b0d0f-4f5a-4412-8f83-a57eaff4be45/sharepoint-search-host-controller-does-not-start?forum=sharepoin
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
How to install SharePoint server 2013 in windows server 2012 R2
Hi,
I have SharePoint server 2013, and I want to install it on windows server 2012 R2 version.
Can you guide me on how to install it?,
or you if you got the download link of the full product of the latest release of SharePoint 2013 with sp1, please give me.
thanks in advance.Hi,
Now I could install SP 2013 following this article
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
I realized installing prerequisites software manually wont let Sharepoint 2013 to be installed in Windows 2012 r2 because of some issues, but with the use of power shell I could.
Thanks everyone.
Maybe you are looking for
-
I bought my computer in July 2010. After 3 and a half years I finally discovered there was and an issue. GPU error. Fine. ok. I went to the store and even though they were nice enough to fix it for free, I'm now having another issue. Whenever I s
-
Payables Employee Listing Report Doesn't Reflect End-Date
We are running apps 11.0.3 on HP-UX 11, 8.0.5 database. When we run the Employee Listing in AP, the employees we have end-dated continue to show up when we run the report for only 'Active' employees. We don't have HR installed, so I don't know where
-
Chase Southwest Rapid Rewards-APPROVED
I found these boards so helpful in deciding whether or not I should apply, so I thought I'd share my experience for any others who may be interested in this card. All 3 of my scores are right around 650. I have a 4 year old car repo, and a few 6 ye
-
Why does PP CS5 not keep my preview files on my Mac?
I love Premiere Pro on my Mac because it interfaces so well with AE. However, every time I render something in my DSLR timeline, shutdown Premiere, then open it later, I have to re-render again. I am not a novice and I know what I am doing, but I've
-
Make my After Effects composition into an Encore menu... How?
I'm new to After Effects, but have had a fair bit of experience with Encore. I've managed to create a rather cool looking menu in AE for a DVD i'm going to create in Encore, but it is obviously an AE composition, which consists of a Photoshop layer a