Sharepoint server get all Updates except share point Updates

hi
I have a sharepoint server that sharepoint 2013 has installed on that .my Update server is sccm 2012 r2 and I checked all office 2003,2007,2010,2013 product to be synchronized .every thing is good sccm work fine in synchronizing update with Microsoft.and the
share point server OS gets Updates finely .But the Problem is here that share point service doesn't get any updates .all updates deployed to OS except share Point updates.
whats the solution ?
thanx

I checked those files .but there weren't any errors .I checked them through reporting but it still says that those
Updates are not required whereas the server doesn't installed any share point Updates.
http://support2.microsoft.com/kb/2767999
A change in the package configuration was introduced after SharePoint Server 2013 was released. You must install this public update before you install later SharePoint updates.
Note This update is available only from the Download Center and is currently not available from Microsoft Update.
https://www.microsoft.com/en-us/download/details.aspx?id=36989
Due to a change in the package configuration introduced after SharePoint 2013 RTM the March Public update is a mandatory requirement in order to install subsequent SharePoint Updates.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
thanks for reply 
But before I've got another share point server 2013 and wsus server (not sccm) .that was ok with all Updates .
I didnt do any thing special in that case.like installing some hotfixes or anything else.

Similar Messages

  • Sharepoint 2010 User getting kicked out of share point multiple time , can some one help me what coule be reason

    using SharePoint 2010 > under marketing > task, user getting kicked out of share point multiple times. don't know the reason, does any one have any idea,  learning about SP,  any help will be appreciated.

    try this one:
    http://sharepointsolutions.blogspot.com/2008/06/how-do-i-make-our-sharepoint-site-stop_17.html
    if fixed the issue fine other wise could you please check the ULS logs/ application ?IIS logs at the same time user kicked out.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • File Server loses all it's shares and becomes unavailable

    We have problems with a Windows Server 2008 R2 File Server. At random the file server loses all it's shares and the homedrive and application shares are not available anymore. A reboot seems the only way to solve this, untill it happens again. Today we had
    another crash and we were able to create a manual dump of the Server service. I have used WinDBG to analyze the dump, but I'm not really confident what I can use from this dump. Here is a copy of the dump:
    Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [D:\NLHFDFS01\svchost.DMP]
    User Mini Dump File with Full Memory: Only application data is available
    ************* Symbol Path validation summary **************
    Response                         Time (ms)     Location
    Deferred                                       http://msdl.microsoft.com/download/symbols
    Symbol search path is: http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    Windows 7 Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: Server, suite: Enterprise TerminalServer SingleUserTS
    Machine Name:
    Debug session time: Wed Apr 29 10:47:14.000 2015 (UTC + 2:00)
    System Uptime: 31 days 21:18:36.690
    Process Uptime: 31 days 21:18:33.000
    Loading unloaded module list
    ntdll!NtWaitForSingleObject+0xa:
    00000000`77a705fa c3              ret
    0:000> !analyze -v
    *                        Exception Analysis                                   *
    *** ERROR: Symbol file could not be found.  Defaulted to export symbols for wuaueng.dll - 
    GetUrlPageData2 (WinHttp) failed: 12029.
    FAULTING_IP: 
    +1fcd4b0
    00000000`00000000 ??              ???
    EXCEPTION_RECORD:  ffffffffffffffff -- (.exr 0xffffffffffffffff)
    ExceptionAddress: 0000000000000000
       ExceptionCode: 80000003 (Break instruction exception)
      ExceptionFlags: 00000000
    NumberParameters: 0
    CONTEXT:  0000000000000000 -- (.cxr 0x0;r)
    rax=0000000077a1a000 rbx=0000000000000000 rcx=0000000000005a4d
    rdx=0000000077920000 rsi=00000000ffffffff rdi=00000000000000c8
    rip=0000000077a705fa rsp=00000000000af4c8 rbp=0000000000000000
     r8=00000000000000f8  r9=00000000000af178 r10=0000000000000000
    r11=00000000779200f8 r12=0000000000000000 r13=00000000002de110
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl zr na po nc
    cs=0033  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00000246
    ntdll!NtWaitForSingleObject+0xa:
    00000000`77a705fa c3              ret
    FAULTING_THREAD:  000000000000016c
    DEFAULT_BUCKET_ID:  STATUS_BREAKPOINT
    PROCESS_NAME:  svchost.exe
    ERROR_CODE: (NTSTATUS) 0x80000003 - {EXCEPTION}  Breakpoint  A breakpoint has been reached.
    EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - One or more arguments are invalid
    NTGLOBALFLAG:  0
    APPLICATION_VERIFIER_FLAGS:  0
    APP:  svchost.exe
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    PRIMARY_PROBLEM_CLASS:  STATUS_BREAKPOINT
    BUGCHECK_STR:  APPLICATION_FAULT_STATUS_BREAKPOINT
    LAST_CONTROL_TRANSFER:  from 000007fefdc210dc to 0000000077a705fa
    STACK_TEXT:  
    00000000`000af4c8 000007fe`fdc210dc : 00000000`02fa08c0 00000000`77a41da8 00000000`a4378ba8 00000000`01c9e060 : ntdll!NtWaitForSingleObject+0xa
    00000000`000af4d0 000007fe`ffbdaffb : 00000000`ffffffff 000007fe`ffbd344c 00000000`00000000 00000000`000000c8 : KERNELBASE!WaitForSingleObjectEx+0x79
    00000000`000af570 000007fe`ffbd9d61 : 00000000`002f6a70 00000000`000000c8 00000000`00000000 00000000`00000000 : sechost!ScSendResponseReceiveControls+0x13b
    00000000`000af660 000007fe`ffbd9c16 : 00000000`000af7c8 00000000`00000000 00000000`00000000 00000000`00000000 : sechost!ScDispatcherLoop+0x121
    00000000`000af770 00000000`ff251c09 : 00000000`00000003 00000000`002de110 00000000`00000020 00000000`00000000 : sechost!StartServiceCtrlDispatcherW+0x14e
    00000000`000af7c0 00000000`ff25242e : 00000000`00000000 00000000`ff252329 01d0694a`57cae81a 00000000`2117ef12 : svchost!wmain+0x18a
    00000000`000af7f0 00000000`778159ed : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : svchost!ScCreateWellKnownSids+0x2fd
    00000000`000af830 00000000`77a4ba01 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0xd
    00000000`000af860 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x1d
    STACK_COMMAND:  ~0s; .ecxr ; kb
    FOLLOWUP_IP: 
    sechost!ScSendResponseReceiveControls+13b
    000007fe`ffbdaffb 85c0            test    eax,eax
    SYMBOL_STACK_INDEX:  2
    SYMBOL_NAME:  sechost!ScSendResponseReceiveControls+13b
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: sechost
    IMAGE_NAME:  sechost.dll
    DEBUG_FLR_IMAGE_TIMESTAMP:  4a5be05e
    FAILURE_BUCKET_ID:  STATUS_BREAKPOINT_80000003_sechost.dll!ScSendResponseReceiveControls
    BUCKET_ID:  X64_APPLICATION_FAULT_STATUS_BREAKPOINT_sechost!ScSendResponseReceiveControls+13b
    ANALYSIS_SOURCE:  UM
    FAILURE_ID_HASH_STRING:  um:status_breakpoint_80000003_sechost.dll!scsendresponsereceivecontrols
    FAILURE_ID_HASH:  {bb63494f-e1c6-d49e-12fa-866691bbfd47}
    Followup: MachineOwner
    Can anyone help on this?

    Hi,
    Did you access the D: drive of the file server locally or on a client? There is a similar thread, please go through it to help troubleshoot this issue:
    Server 2012 R2 File Server Stops Responding to SMB Connections
    http://social.technet.microsoft.com/Forums/en-US/e9567167-22db-4b8c-9f96-a08b97d507f9/server-2012-r2-file-server-stops-responding-to-smb-connections?referrer=http://social.technet.microsoft.com/Forums/en-US/e9567167-22db-4b8c-9f96-a08b97d507f9/server-2012-r2-file-server-stops-responding-to-smb-connections?forum=winserverfiles
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot get all updates from iTunes software

    Hello. There is a strange problem.
    Sometimes, when I open iTunes from my computer, a small number will be displayed after "Apps".
    When I click the "Apps", I can also see that there are some updates available from the bottom link text.
    But after I click that bottom link, I cannot get all programs which need to be update listed. When I update all listed, iTunes still says there are some apps to be updated, but when I click that bottom link, only a text "No updates are currently available. To check for updates for another Apple ID, sign in with that Apple ID."
    At that time, I can get all updates from my iPhone - Apple Store. So all have to do, is update all apps from my iPhone and sync it back. But if some apps are not installed on this iPhone, I have no way to update it.
    BTW, I've tried to click Store - Check for available downloads from iTunes on my computer. It's useless in this case.
    Any solution? Thanks.

    It think its a bug. I got the same results under MX 7.0.2.
    The topic of maxrows recently came up on another thread. I
    did some searching and according to TechNote 18339 there was a
    change with maxrow
    "<cfquery maxrows=N> bug. ColdFusion MX (until ColdFusion
    MX 7.0.1 CHF2) didn't pass maxrows to the underlying driver
    (statement.setMaxRows())"
    Given the results you're getting, it sounds like CF is
    applying the maxrow to all of the resultsets, not just the one
    where maxrows was declared. I suspect cfstoredproc's usage of
    statement.setMaxRows() is incorrect. Thats just a guess though.
    Bottom line, I think you'll need handle it manually.
    Personally, I would recommend placing the row count logic in the
    stored procedure (if possible). The overall results will be more
    consistent and you won't have to worry about this kind of issue
    again.
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18339
    http://livedocs.adobe.com/coldfusion/7/htmldocs/00000314.htm
    http://www.remotesynthesis.com/blog/index.cfm/2006/3/23/Maxrows-Issue-in-CFQuery

  • Hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

    hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

    hi have done as you said plug ethernet straight into computer and into back of router,and worked straight off,i had the the powerline on extention when imac was up stairs,when i had computer down stairs it still would not work with powerlines even on main wall sockets,so they are getting binned,looks like i will have to move router upstairs,just wondering if i got extention wire from back of openreach box to router upstairs```,would it be ok,,the openreach box is next to my only phone socket in house,which is in back kitchen..any advice would be great,

  • 10.3 Server - Permissions for an images Share Point?

    Hello,
    I'm running 10.3 Server and I want to create a Share Point that acts as an images and logos depot. I want Guest users to access the folder, but I don't want them to be able to delete folders or files. At the same time, I want them to be able to copy the images and logos from the server and be able to edit them locally.
    Right now I have permissions set to Everyone = READ ONLY — so, they can't delete from the server, but at the same time, when the copy to their machine via Guest access, the files are still READ ONLY and they can't edit (without doing a save-as).
    Is there any way to set up a Share Point to do what I want?
    Thanks,
    Kristin.

    Hey Tony (or anyone else),
    I've finally got 10.5.4 Server up and running on a new Intel Xserve and I've set up all the users (home directories are on client machines, not network home folders) and groups. I went about building the images volume last night, and even though I'm now using ACLs (which is awesome), I'm still having the same issue I was having under 10.3 with respect to this issue. Basically, what I'm looking to do is this — I have a share point (mountable volume) called "Digital Resources", and within that share point is a folder called "Images". This "images" folder contains our master images library. I have a group called "Design" which has read-only access to "Digital Resources" as I want them to be able to view the library, but not make any modifications to files while on the server. But, I also want them to be able to copy images FROM the server onto their local desktop and have the ability to edit them (crop, resize, etc. based on their artwork requirements). The problem is, when they copy from the server to their local desktop, the files they copy come over with read-only permissions (which means they can't save their edits without doing a save-as, etc.). What do I need to do to make it so that when they copy a from the server to the desktop, the file inherits the local permissions, thus allowing them to "own" the file (without them having to deal with permission changes themselves)? We're potentially talking hundreds of images on a daily basis.
    Thanks!
    Kristin.

  • HT4539 My Ipad does not have the software update option so i do not get any updates.  How can I get all updates?

    My Ipad does not have a software option so I do not get any updates - what can I do?

    Check out the Apple link below.
    http://support.apple.com/kb/HT4972

  • Can access a remote server from all locations except from my house

    This is a very weird problem.
    My home ISP is Xplornet. This is a rural "fixed wireless" set-up (antenna on the roof connected to the Xplornet modem). The Xplornet modem is connected to a Belkin router. The router connects wirelessly to my laptop.
    The remote server (the office server) is connected to an Apple airport. The ISP is Bell, and we have a static IP.
    Before we moved, I was with Rogers (cable Internet service). While with Rogers, I could connect remotely to my office server using the AFP protocol.
    Now, here's the weird problem: Now that I am with Xplornet, I can connect to my server remotely from any location EXCEPT my house. I can go to a Starbucks and connect to my server. I can go on vacation in the U.S. and use the local WiFi to connect to my server. But I CANNOT connect from my house to the remote server.
    I have spoken to Xplornet and they say it's an Apple problem (which is what every non-Apple tech always seems to say). Or, perhaps, they say, it's the local dealer (Sentel Communications).
    Sentel says I need to pay for a static IP for my home (Huh?). Why would I need to pay for a static IP at home just so I can connect OUT to a remote server?
    Is this somehow related to the Belkin router not letting me "out"?
    Any thoughts and advice would be greatly appreciated.

    Thanks for responding, Bob.
    Below is the result of my Ping attempt, and port scans. I scanned 548, and 5003, which I use for FileMaker (which works fine from home), I don't use screen sharing. (I can confirm that both 548 and 5003 are open on Airport on the host machine.)
    So, from my home (remote) location, here's what I get (IP: 74.xx.xxx.xx):
    --- 74.xx.xxx.xx ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 57.126/91.371/185.774/45.549 ms
    Scan of port 5003
    Port Scan has started ...
    Port Scanning host: 74.xx.xxx.xx
               Open TCP Port:           5003                    fmpro-internal
    Port Scan has completed ...
    Scan of port 548
    Port Scan has started ...
    Port Scanning host: 74.xx.xxx.xx
    Port Scan has completed ...
    So, 5003 is OK, 548 is not. I have to conclude this is related to my home ISP in some way?
    Unfortunately, the host server is running 10.3 (don't ask), which is not supported by Logmein. (I do use Logmein for a Windows machine on the same network, and I can connect to one area of the server via the PC, but not to the part I need, which might be the subject of a future thread.)
    Regardless, being able to connect to my work server remotely from every location EXCEPT from my home is infuriating.
    I just saw this thread about an ISP that has blocked port 548, although I always assumed the ports had to be open on the host side, but maybe not? (I have to confess, I do find the port stuff confusing.)
    If my home ISP blocks 548, then I guess that would prevent me from remotely accessing the server from home?
    If that is the case, is port 548 the only AFP option?

  • Get All Updated row keys

    HI All
    I'm developing a web app using jdeveloper 11.1.2
    I have a VO and datacontroller for that VO
    I draged and droped that VO to a page as a tabel
    In this table user can update only one row
    This my user case
    user can update one or more rows at once ance clicks update button
    I want to get the key of al updates rows.
    Could one tell me how to do this
    Thankx

    Here is the sample code:
        public String findUpdatedRowKeys() {
            DCBindingContainer bindings = (DCBindingContainer)this.getBindings();
            DCIteratorBinding itr = bindings.findIteratorBinding("<Iterator_Binding_Of_Table>");
            List updatedRowKeys = null; //Contains list of row keys that are updated
            for(Row row : itr.getAllRowsInRange()){
                ViewRowImpl viewRow = (ViewRowImpl)row;
                //Check if the row is modified, if yes, add it to the updatedRowKeys list
                if(viewRow.getEntity(0).getEntityState() == EntityImpl.STATUS_MODIFIED){
                    if(updatedRowKeys == null)
                        updatedRowKeys = new ArrayList();
                    updatedRowKeys.add(viewRow.getKey());
            System.out.println("\n************ UpdatedRowKeys: "+updatedRowKeys);
            return null;
        public BindingContainer getBindings() {
            return BindingContext.getCurrent().getCurrentBindingsEntry();
        }Sireesha

  • HT2305 Never done updates on phone do I have to take to Apple store to get all updates or can I do thru I do thru I tunes.

    Have a IPhone  4 and have never done updates do I have to take to apple store for all new updates.

    You can update directly on the iPhone. Tap Settings > General > Update and follow the prompts.
    Or, connnect your iPhone to a ocmputer, launch iTunes and update from there.
    Or, take your iPhone to an Apple Store   Apple - Find Locations
    Keep in mind, the iPhone 4 has limited features on iOS 7 >  New lease on life or death sentence? iOS 7 on the iPhone 4

  • FTP root & share points - how can I disable the latter?

    I'm new to the Mac world and I'm in the process of configuring a Mac OS X server to run Contribute 3.
    The server will be used to host a single site and the FTP is working now.
    Question is, how can share points be disabled?
    In the FTP root (libary/webserver/documents/) the following 3 files always get created automatically (I've tried deleting them as root):
    Groups
    Public
    Users
    Is there a way to disable them? I was thinking of placing the website one folder away from the ftp root, but that could make things too complicated for users.
    Please advise!

    Anyone?
    I removed the share points in the Workgroup Manager but they still show up when I ftp into the server (set to ftp root & share points).
    Does anyone know how to get rid of them permanently?
    If that is all it should take, please post... The system has been unable to save all settings as an account was deleted and the OS placed certain folders into the "unkown" ownership which is the topic in another thread:
    Perfect Shot, "Xserv - user settings are not saved - help!", 06:01pm Sep 19, 2005 CDT

  • Tiger client can not mount the chinese named share point

    We have a Snow Leopard Server running AFP with some share points.
    Other clients include Macs and Windows XP/Vista connecting well, beside a 10.4.11 powerbook,
    this Tiger Macs can also connect with the English name share points,
    but while mount the Chinese name share points,
    It showed the error means can't find the directory.
    Is that a bug?

    more information:
    nidump -r /exports .
    "name" = ( "exports" );
    CHILDREN = (
    "clients" = ( "192.168.0.10" );
    "name" = ( "/backup" );
    "opts" = ( "" );
    showmount -a returns:
    Exports list on localhost:
    /backup 192.168.0.10

  • How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

    Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
    In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with  Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
    to Public URL = "proxy URL".
    In Host Named Site Collections,  alternate access mappings  are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
    URL is associated.  This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
    point HNSC to respond  to a different URL(proxy URL). Consequently, Share Point URLs are exposed to  external users.
    Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If  hiding the internal Share Point URLS is a requirement,
    it suggests to use a web application instead of host named site collections.
    Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
    http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
    Excerpt from above article-
    "Host Named Site Collections Only Use One Host Name
    Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
    are always considered to be in the Default zone.  This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
    as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
    calls to the same URL.  If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

    Hi Satish,
    You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
    It is by design that each host-name site collection only support one URL for each zone.
    The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
    https://support.microsoft.com/en-us/kb/2826457
    So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
    Best regards.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Point a client to get software updates from the local OS X Server

    I have an OS X Server that's serving only clients as a File Share device that I would like to use for Software Updates. There are three Mac Clients and a bunch of iOS clients. How do I use Software updates from the Server? I read the instructions on configuration but have the following questions:
    Where do I find the correct port and catalog file name?
    The instruction specify a port of 8088 and a catalog of 'index.sucatalog" in the example. Is this always the case?
    I can write to the .plist specified but cannot read from it (get an error). I can see that the file has been written and the data is correct. What's wrong?

    Apple's Software Update Server only provides updates for Apple Mac software. It does not provide updates for Mac Applications via the AppStore nor does it provide any updates for iOS devices.
    Apple's Caching Server works differently. When a Mac or iOS device on your network requests an update from either the Mac AppStore or the iOS AppStore this will then be 'cached' on the server so that next time a device requests the same update it is available locally.
    The URL for a local Software Update Server would be of the form
    http://server.domain.com:8088/index.sucatalog
    This would be written on a client Mac as follows
    sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://server.domain.com:8088/index.sucatalog
    It would be read on a client Mac as follows
    defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
    Note: Older versions of OS X had a version of the defaults command which did not like you including the file extension of the plist file so in the past the following would fail.
    defaults read /Library/Preferences/com.apple.SoftwareUpdate.plist CatalogURL

  • SharePoint Server 2013 Upgrade failure after Updating SP1 + Nov10 CU " Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown"

    After Successfully having SharePoint Server 2013 Farm Installation on 2 Servers AD + Central Admin Application server, OS: win server 2008 R2 Ent SP1.
    I set up the configuration for SharePoint app and Workflow Manager to work properly on the Den environment,  the time for SP1 running has come and after downloading the Service pack 1 of SharePoint server 2013 and completing the wizard, I run the SharePoint
    2013 Configuration Wizard after installing SharePoint 2013 SP1, and the wizard failed on step 2 with the Error from the Log file as showing below,
    "Task upgradebootstrap has failed with an unknown exception 
    01/04/2015 00:43:30  11  ERR                  Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown.
       at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags)
       at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()"
    Also I was not able to create websites like before, and the creating of new site is failed with error message :
    "Failed to call GetTypes on assembly Microsoft.Office.TranslationServices, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Method not found: 'Microsoft.Office.Web.Common.ProcessImageInfo"
    Is there any solution to my problem with SP1 of SharePoint Server 2013, I don't think that SP1 should generate such bugs in a stable environment.
    Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.

    Hi Basel,
    What edition of SharePoint do you have and what patch did you attempt to install?
    If you are on SharePoint 2013 Enterprise, please make sure you are installing Service Pack 1 for SharePoint Server:
    http://www.microsoft.com/en-us/download/details.aspx?id=42544
    If you are on SharePoint 2013 Foundation, please make sure you are installing  Service Pack 1 for SharePoint Foundation :
    http://www.microsoft.com/en-us/download/details.aspx?id=42548
    For more information, you can refer to the thread:
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/ba9656e9-837e-4261-b164-b5bdfe8adce3/why-does-machine-translation-fail-when-i-do-not-use-it?forum=sharepointgeneral
    http://sharepoint.stackexchange.com/questions/84284/failed-to-call-gettypes-on-assembly-microsoft-office-translationservices
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

Maybe you are looking for

  • ASA 5510 Guest Internet Access

    I have a subnet for guest network access, both wired and wireless.  We have a Netgear ProSafe that is trunked to a Cisco 2901 performing 'Router-on-a-Stick'.  For most internal traffic, it all stays behind the ASA.  But for guest traffic, I have a ro

  • Sax character method cutting elements

    Hi everyone. Here is my problem, sometimes the character method of Sax parser doesn't give me entire elements back. I found these but cannot get it working: Also, be really careful with what you get back from the characters method of the handler. You

  • SAP XI Acknowledgements

    Hello experts, I am a little confused on how SAP XI acknowledgements work (with asynchronous and synch scenarios) - with and without a BPM process. I know that when you define a sync or async scenario in ccBPM, you have options on how to define ackno

  • Display Name in Infoview XIR2

    Post Author: rapharris CA Forum: Administration Is there an easy way to display the Full Name set up in the CMS instead of the username in the header area of infoview? i.e. Welcome Fred Bloggs instead of Welcome F123456 I have a feeling that if it is

  • App running in Rosetta or Universal Binary

    Is there a way to see if an app is running under Rosetta or Universal Binary AFTER you have launched it? i am aware that get info for the app will tell you if it is a native UB or PPC app. for Ex: i am running Adobe After Effects CS3 which is UB, but