Sharepoint services 3.0 on 2008 R2

Looking at the docs I
don't see anywhere where it says I need MSSQL installed to do a stand alone install, but after finishing the setup I get this error:
I found this blog post which states: "By Default Network Service account is the Startup service account for SQL Embeded Edition but Network service Account does not have permission in SQL Embeded installation location(C:\windows\SYSMI) and .Net Framework
2.0 location."
But it is for an older version of sharepoint (as 3.0 uses .net 3.0). Is this still a solution for this?

Hi,
Thanks for your post.
As far as I known, neither Windows SharePoint Services 3.0 or Microsoft Office SharePoint Server 2007 can run on Windows Server 2012. Please note SharePoint 2010 SP2 and SharePoint 2013 support for Windows Server 2012.
SharePoint 2010 support for Windows Server 2012
http://support.microsoft.com/kb/2724471
In addition, for further support, please post at SPS forum. Your understanding is highly appreciated.
SharePoint Server Forum
http://social.msdn.microsoft.com/forums/en-US/category/sharepoint/
Best Regards,
Aiden
Aiden Cao
TechNet Community Support
So is there any low cost or free solution as in WSS 3.0 equivalent in Windows Server 2012 ?
I wonder if the Sharepoint Service 2010 on Windows Server 2012 is the same as WSS 3.0 in Windows Server 2003.
/* Server Support Specialist */

Similar Messages

Crystal Reports 2008 and Sharepoint Services in 64bit

Hi,
I have searched and post questions about the problems with the fact that thera are no great support for 64 bit. And still no solution. Why? Why? Why?
Now to my question. I have Crystal Reports 2008 in a Windows 2008 64 bit. Yes, I have got it running with the help of: Enable32bitAppOnWin64. But now to my problem...
I want to run Sharepoint Services 3.0 on the same server. But read on Microsoft.com:
The hardware and software requirements described in this article apply to both x32-bitu2013based and x64-bitu2013based systems. However, if you installed the 64-bit version of Windows Server 2008 and then modified the Enable32bitAppOnWin64 registry key so that Internet Information Server (IIS) is running in 32-bit emulation mode, you cannot install Windows SharePoint Services 3.0. To install either 32-bit or 64-bit Windows SharePoint Services 3.0 you must run IIS in 64-bit mode.
Does this means that I cannot run my webapp and Sharepoint Services on the same machine just because you havent find any solution to the 64-bit problem? What to do???
/R

Raymond,
We have 64 bit runtime for Crystal Reports Basic that comes with Visual Studio .NET 2008. The version number for CR Basic is 10.5.
It sounds like you are out of luck if you want to use Crystal Reports XI R2 or Crystal Reports 2008 because there are no plans to release native 64 bit assemblies in those versions.

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Reinstall Corrupted WSUS without conflicting with SharePoint services, SBS 2008

My SBS server 2008 is a little complex but If someone can please advice me on below, it would be much appreciated....
My SBS server 2008 is a little complex but If someone can please advise me on
below, it would be much appreciated....<o:p></o:p>
SBS server 2008 had WSUS & SharePoint services running but the WSUS database
was corrupted. I have tried to fix WSUS database but failed to do so....<o:p></o:p>
I have used the option to "repair" WSUS through its Setup.exe file to do a
complete reinstall. The WSUS did uninstall parts of itself but was not
completely removed.....The service has been removed from the repair process...."Update services" folder remain.
I need to install WSUS services but I am not familiar with SharePoint...How would I
reinstall WSUS without conflicting with SharePoint??<o:p></o:p>
Any advice would help.<o:p></o:p>
Thanks,<o:p></o:p>
Andrew<o:p></o:p>

I hope you have already followed
http://technet.microsoft.com/en-us/library/dd443475(v=ws.10).aspx
To install WSUS, download WSUS 3.0 SP2 and install it
Create WSUS Group Policies :
http://blogs.technet.com/b/sbs/archive/2013/04/24/how-to-manually-create-the-sbs-2011-standard-and-wsus-group-policies-objects.aspx
Regards,
Mahesh Ramola

SharePoint 2010 list to SQL 2008 table

I would like export the data from SharePoint 2010 list to SQL 2008 table.
At work we don't have SQL integration Services.
What is the best way to export the data without copying and paste into the table?
Any help will be appreciated.
simam

Follow the article for step by step web part creation in SP 2010.
http://www.codeproject.com/Articles/136857/Developing-Web-Parts-for-Sharepoint-2010
http://msdn.microsoft.com/en-us/library/ms415817(v=office.14).aspx
You use GetDataTable method to get the datatable from SPListItemCollection.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.splistitemcollection.getdatatable.aspx
Amit

SharePoint 2003 and SQL Server 2008

Can the SharePoint 2003 SQL Server 2000 database (backend) be migrated to SQL Server 2008? In other words, we want to use SharePoint 2003 with SQL Server 2008.
Thank you.

Hi there
I can confirm that SharePoint 2003 SQL Server 2000 Databases can be backed up and restored to SQL 2008 R2.
Stop all services and web on your SharePoint server before the move.
Backup all your SQL 2000 databases.
Restore them on your new SQL 2008/R2 database server
Setup a SQL Alias (make sure you DONT set the alias to 'Dynamic Port' or you may get the error below) on the SharePoint servers and after restarting SharePoint everything worked 100%.
Kind regards
Riccardo
Error if using Dynamic port on Alias .
If you move the SharePoint Portal Server 2003 databases to another computer
that is running SQL Server 2000, you may receive an error message that is
similar to the following when you try to access the portal site:
Array cannot be null.
Parameter name: Source
For example, you receive this error message when you click the link that is
displayed on the Web Parts Maintenance page. This error message may not be
caused by a Web Part issue. You may receive this error message in situations
when the TCP port that SQL Server 2000 uses is different from the TCP port
that SQL Server 2000 used on the original computer. Use Client Network
Utility to verify that the port that SQL Server 2000 uses is correct.
PS. Please remember to mark your question as answered if you got good advice.

When I start SQL server agent (sharepoint) service it stops everytime.

hi,
I have a windows server 2012 and SQL server 2008 R2 and SQL server agent (sharepoint) service goes to stop status everytime i start it ,please help me?

There is no error log ,only 3 information log was there after starting the service that one of them is related to it after stopping (event ID=7036 all of them).but also there is a warning information that source of it is DNS client Events and it's event
ID= 1014 and in the general section of explanation i see the user of last event i mentioned is NETWORK SERVICE ,but the account that the service logs on with it,is administrator.
Without error log message or any kind of message its not possible to help you.Is your SQL Server up and running.Did you checked SQL server errorlog.Run this query after trying to start Agent and post the output.
sp_readerrorlog
Also can you locate SQLAGENT.OUT file and open it in notepad.Location can be at
"Drive :\Program
Files\Microsoft SQL Server\MSSQL\LOG--
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

SharePoint Services 2.0 Obsolete?

We are still using TFS 2008. That server is running Microsoft Windows SharePoint Services 2.0 SP3 which I'm told is now obsolete. Is that version still supported and - if not - what recommendations can you provide regarding an update without
breaking TFS 2008?

Mainstream support for WSS 2.0 ended on January 13, 2009. Extended support ended January 14, 2014 (see Microsoft Support Lifecycle)
This means you can no longer get support directly from Microsoft Support. You can still receive limited support from resources such as these forums, other 3rd party forums and Microsoft Partners.
If your system is still working with minimal operatonal overhead, sticking with what you have may make sense for you.
For what it's worth, TFS 2008 moved out of mainstream support on April 9, 2013 and is currently in extended support until April 8, 2018 (again, see
Microsoft Support Lifecycle. If you're looking to upgrade my first thought would be to upgrade TFS and WSS (to SharePoint Foundation 2013) at the same time.
Note that out of the box, you cannot upgrade directly from WSS 2.0 (SP2003) to SP2013. You'll need to upgrade first to WSS 3.0 (SharePoint 2007), next to SharePoint Foundation 2010, and then you are able to upgrade to SharePoint 2013. There are third party
upgrade/migration tools you can use to go directly from 2003 to 2013, though when integrated with TFS I cannot guarantee this will work. You'll definately want to test your upgrade approach no matter the method.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Since Windows 2003 Services ending we moving Sharepoint Services 3.0 to Windows 2008R2, Any help how can this be done ?

Since Windows 2003 Services ending we moving Sharepoint Services 3.0 to Windows 2008R2,
Any help how can this be done ?
We have 1 Server and single Farm.
I have build New 2008 R2 Server and planning to restore Backup taken from Old server to this new server. Will this work ?
Which version of Sharepoint should i install on Windows 2008 R2 server , i run sharepoint.exe downloaded but it throws error

Sorry for late reply.
Your next step is, create a new web application and deattach the content DB from new web application. You need to attach existing CDB to that web app.
Here is some links for your ref (unfortunately this is for 2010 but it same steps should work in WSS as well)
http://nikpatel.net/2009/03/11/step-by-step-process-move-site-collections-from-one-content-database-to-another/
http://www.sharepointpitstop.com/2012/06/attachdetach-sharepoint-webapp-contentdb.html
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Open Sharepoint services 3.0 documents with office 2013

Hi
we are using SharePoint services 3.0 with document libraries.
we have lookup fields on the library meta data.
problem started when upgraded users office to 2013 the document information panel is not
loading, the error they get is "the document information panel was unable to load".
office standard 2010 works fine
office 2013 pro plus works fine
office standard 2013 get this error

Hi,
Please check if this applies:
http://blogs.msdn.com/b/tehnoonr/archive/2012/05/17/sharepoint-2010-document-information-panel-fails-to-load-when-office-documents-are-opened-in-a-library-that-contains-lookup-columns.aspx
This problem is caused if your list contains lookup columns that were created programmatically or using custom features.
You may also have a look at this:
http://joranmarkx.wordpress.com/tag/document-information-panel/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice.
Microsoft does not guarantee the accuracy of this information.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Data services with SQL Server 2008 and Invalid time format variable

Hi all
Recently we have switched from DI on SQL Server 2005, to DS(Date Services) on SQL Server 2008. However I have faced an odd error on the query that I was running successfully in DI.
I validate my query output using a validation object to fill either Target table (if it passes), or the Target_Fail table (if it fails). Before sending data to the Target_Fail table, I map the columns using a query to the Target_Fail table. As I have a column called 'ETL_Load_Date' in that table, which I should fill it with a global variable called 'Load_Date'. I have set this global variable in the script at the very first beginning of the job. It is a data variable type:
$Load_Date = to_char(sysdate(),'YYYY.MM.DD');
When I assign this global variable to a datetime data type cloumn in my table and run the job using Data Services, I get this error:
error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Invalid time format>.
However I didn't have this problem when I was running my job on the SQL Server 2005 using Data Integrator. The strange thing is that, when I debug this job, it runs completely successfully!!
Could you please help me to fix this problem?
Thanks for your help in advance.

Thanks for your reply.
The ETL_Date is a datetime column and the global variable is date data type. I have to use the to_char() function to be able to get just the date part of the current system datetime. Earlier I had tried date_part function but it returns int, which didn't work for me.
I found what the issue was. I don't know why there were some little squares next to the name of the global variable which I had mapped to the ETL_Date in the query object!!! The format and everything was OK, as I had the same mapping in other tables that had worked successfully.
When I deleted the column in the query object and added it again, my problem solved.

Error Accessing Report in SharePoint Integrated Mode (SQL Server 2008 with SharePoint 2007)

I have installed reporting services with SharePoint Integration Mode, however, whenever I access the report, below error occurs:
Report Server has encountered a SharePoint error. (rsSharePointError)
Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)
Checking through the Log Files, there is more detailed error message, but not sure what cause the error:
library!ReportServer_0-2!4064!11/01/2010-15:00:39:: Call to GetPermissionsAction(http://[servername]/sites/Reporting/Reports/TestReport.rdl).
library!ReportServer_0-2!4170!11/01/2010-15:00:39:: Call to ListParentsAction(http://[servername]/sites/Reporting/Reports/TestReport.rdl).
library!ReportServer_0-2!4170!11/01/2010-15:00:40:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) --->
System.Runtime.InteropServices.COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
   at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   --- End of inner exception stack trace ---
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.SPFile.GetFileContent(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary()
   at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper.SyncToRSCatalog(String path, Boolean createOnly)
   --- End of inner exception stack trace ---
library!ReportServer_0-2!4064!11/01/2010-15:00:40:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) --->
System.Runtime.InteropServices.COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))
   at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   --- End of inner exception stack trace ---
   at Microsoft.SharePoint.Library.SPRequest.GetFileAsByteArray(String bstrUrl, String bstrWebRelativeUrl, Boolean bHonorLevel, Byte iLevel, OpenBinaryFlags grfob)
   at Microsoft.SharePoint.SPFile.GetFileContent(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary(SPOpenBinaryOptions openOptions)
   at Microsoft.SharePoint.SPFile.OpenBinary()
   at Microsoft.ReportingServices.SharePoint.Server.SharePointServiceHelper.SyncToRSCatalog(String path, Boolean createOnly)
   --- End of inner exception stack trace ---
Any idea on how to resolve the issue?

Hi Jin Chen,
Thank you for your response. I have disabled all the Symantec End Point Protection Service, but problem persists..
Further, I have checked through the ULS Log in SharePoint, there is more error reported there:
11/03/2010 15:19:48.44 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services Database
6f8g Unexpected
Unexpected query execution failure, error code 282. Additional error information from SQL Server is included below. "The 'proc_GetTpWebMetaDataAndListMetaData' procedure attempted to return a status of NULL, which is not allowed. A status of 0 will be
returned instead." Query text (if available): "{?=call proc_GetTpWebMetaDataAndListMetaData(?,'F77D6A37-F8D2-492C-911C-923C8A135DEB',?,NULL,1,?,?,6187)}"
11/03/2010 15:19:51.46 ReportingServicesService.exe (0x3510)
0x4064
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
11/03/2010 15:19:51.69 ReportingServicesService.exe (0x3510)
0x1EEC
Windows SharePoint Services General
8e2s Medium
Unknown SPRequest error occurred. More information: 0x80020009
Do you have any idea based on the error above?

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

Getting Server Error Code: -2147024891 when using Biztalk Windows SharePoint Services Adapter to upload a document

We are currently running
1. BizTalk Server 2013 R2
2. SharePoint 2013
both in a Windows 2012 Server environment, in Azure.   The BizTalk and SharePoint are running on separate machines.
I am using the Windows SharePoint Adapter to upload a Tif file to a SharePoint document library. However, when the host instance is running under my team member's userid, I get the following error in the eventlog:
The adapter failed to transmit message going to send port "SendOwnershipToSharePoint" with URL "wss://bp1amsapt218:34392/sites/BiztalkSc/Lists/Ownership". It will be retransmitted after the retry interval specified for this Send Port.
Details:"[Microsoft.SharePoint.Client.ServerUnauthorizedAccessException] Access denied. You do not have permission to perform this action or access this resource. Server Error Code: -2147024891Trace:    at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream
responseStream)
   at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
   at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
   at Microsoft.SharePoint.Client.Web.WebUrlFromPageUrlDirect(ClientContext context, Uri pageFullUrl)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.RequestInfo..ctor(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.ListsAccessor..ctor(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword)
   at Microsoft.BizTalk.KwTpm.WssAdapter.ClientOmAccessor.ListsAccessor.TryOpenWebSite(String siteUrl, String sharePointOnlineUsername, String sharePointOnlinePassword, Exception& lastError)
This error was triggered by the Windows SharePoint Services receive location or send port with URI wss://bp1amsapt218:34392/sites/BiztalkSc/Lists/Ownership.
Windows SharePoint Services adapter event ID: 12310".
This userid has already been added to the following groups on the BizTalk Server:
Local Administrators Group
BizTalk Server Administrators
SSO Administrators
BizTalk Isolated Host Users
BizTalk Application Users
I have also made sure the userid has full control access to the SharePoint site and the document library within the site.   I have confirmed that the user with this userid is able to access the SharePoint site and can upload documents to the
document library, manually.   However, when the host instance is running under this userid, I am not able to upload documents to the SharePoint document library.
The Windows SharePoint Services Adapter is configured with the following values:
Adapter Web Service Port:   34392
Timeout:   100000
Use Client OM: Yes
Destination Folder URL: Lists/Ownership
FileName: test.tif
Overwrite: Yes
SharePoint Site URL:
http://bp1amsapt218:34392/sites/BiztalkSc/
Microsoft Office Integration: No
Do you know what the cause for this error is?   We urgently need a resolution for this?

If you create an XML document and upload it to the Windows SharePoint Services Web site. The Windows SharePoint Services adapter will take that message, archive it in the Archive document library, and then send it to the Destination document library. This
procedure demonstrates how a document flows from a Sharepoint web site, through BizTalk Server, and to a Sharepoint Services Web site using the Windows Sharepoint Services adapter.
This MSDN library article shows the procedure, please check whether it will be helpful to troubleshoot.
Create a working directory
Create an XML file
Upload the XML file
See: https://msdn.microsoft.com/en-us/library/aa560513.aspx

Consuming a Web service from Crystal reports 2008 - Error

Hi,
I want to consume a web service from Crystal Reports 2008. I created a New Connection using "XML and Web Services" and given WSDL url as the Web Service location. Crystal Report is able to connect to the WSDL and is displaying the tags correctly. When dragging the output to "Selected Tables' section, I am getting the following error:
"Invalid Argument Provided"
Details: Cannot support ArrayType input parameters.
Kindly help. Apparently this was a limitation in CR XI but does it still exist in CR 2008? Is there any patch available to resolve this issue?
Thanks,
Jaya
Edited by: jayakvr on Feb 17, 2011 10:47 AM
Edited by: jayakvr on Feb 17, 2011 10:48 AM
Edited by: jayakvr on Feb 17, 2011 10:48 AM

This issue is resolved now. I have installed the Service packs 1, 2 and 3 of CR2008 to overcome this error.
Thanks,
Jaya

Sharepoint services 3.0 on 2008 R2

Similar Messages

Maybe you are looking for