SharePoint Social Newsfeed #tag not displaying

Hi All,
It has recently been noticed but on our Share Point 2013 Environment (October 2013 CU) that the Trending #tags feature under News-feed does not work, I have searched for an answer to no avail, I performed a search api query to the #tag and Search comes back
with no results, I am not sure if there is an isue with the search configuration as I tried t follow this blog post regarding the same issue but get stuck when he says configure search.
http://usesharepoint.blogspot.com/2013/06/taggings-been-quite-lately.html
The search content sources are working and all other content is being crawled except the trending #tags.
Edit: Ok it seems I have found the issue, we separated out crawls to content and Mysites, but in the MySites profile we only had sps3://<mysiteurl>. Issue is that we forgot http://<mysiteURL> as well.
Thanks :)

Hi,
Thanks for your sharing.
Cheers,
Jason
Jason Guo
TechNet Community Support

Similar Messages

Div header tag - not displaying correctly

I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not!
The header contains three images; a logo, a banner (text), and a picture of a castle. These should display in a line.
When I first set it up, I realised that the castle picture was normally ending up below the other two on smaller screens etc.
So I changed the dims for my div container from min 760px/max 1260px, to a set width (960px). I then rejigged the three images so the widths were within 960px, with some to spare for the spacing (total widths of the three are 900: hspacing another 20 pixels). There is no padding/borders defined. Therefore the total should be well within the 960 width (?).
It looks fine on my PC (widescreen); in 3 browsers, using the restore down menu command (ie to make it not full screen), and by using the Dreamweaver multiscreen preview (phone, tablet, smaller desktop). It wasn't ideal (as scrolling required), but at least meant the header (and the rest of the screen) displayed correctly, ie in a horizontal line (and then sidebar - content - sidebar).
If I set my container width much smaller, most of the screen will be green (the body) in big screens.
If I rejig the dimensions, it's all a bit hit and miss (and why don't the current dimensions work?).
Do I need to define the width of the header (as well as the container)?
Help! Thank you
http://hertfordcarnival.org.uk/dev/Index.html

Hi there, I started off using one big image, but it didn't look right with regards to size and placing (ie I wanted the logo on the left edge, the castle on the right edge, etc). When you say slice, what do you mean? One image in from fireworks, and then ... ? Thanks again
Date: Wed, 7 Dec 2011 01:37:10 -0700
From: [email protected]
To: [email protected]
Subject: Div header tag - not displaying correctly
    Re: Div header tag - not displaying correctly
    created by osgood_ in Dreamweaver - View the full discussion
Datafan55 wrote: I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not! Why not just use one big image then you wont have a problem of with the alignment. Certainly don't use 'vspace' and 'hspace' to position the images. If you want to use 3 seperate images start by setting them us as one complete image then slice it into 3 images. Then use the following css to position the images side by side. #header img If the total sum of the width of the images is the same or does not exceed 960px then the images should be in a nice row side by side. They will actually sit side by side without using 'float' but you'll get a small gap between them which will be added to the sum of the width which will exceed 960px causing the third image to drop onto the next line.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4068499#4068499
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4068499#4068499. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

CFGrid tag not displaying background color

Hi, My application runs on CF v 4.5 and uses CFGrid tag to
display grids. When I run the same code on MX 7, the grid does not
display the pale yellow background for the grid as it does on 4.5.
Does anyone know how to fix this ?
Thanks, Jay M.

Hi CatJay
I looked at the code you sent and it has no attribute in
place to display any color in the background, so I am guessing that
maybe back in 4.5 there was only 1 colour by default?
Try adding bgcolor="#ffff00" to the cfgrid tag and see if
that changes the colour to yellow. (it should)
Once you get that to work, you can implement any colour you
want.

Social media buttons not displaying in safari

Hi
the social media buttons on my html site not displaying in safari browser, though fine in every other browser
see site below
http://digitalcinemafilms.co.uk/
Can anyone help?
thanks in advance
Melanie

Sorry forgot to say the java buttons dont work - facebook and twitter - the manually placed ones - vimeo and youtube work - so safari doest like java?

HTML tags not displayed when using Data Template

Hi All...
I'm developing a BI Publisher report in which one of the columns is a clob data type. I'm using an xsl stylesheet to format the data present in the clob column.
I've developed the report using data template as the data set. The problem is the clob column which has the HTML tags where not displayed properly...for example
the tag starting with
<
is replaced with
& lt;
I did a couple of searches in this forum and in tim's blog but couldn't find a proper solution...
http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html
API and HTML Formated Content
Re: Problem with text data elements containing escaped HTML codes
HTML Output from CDATA
Re: HTML formatted output
Re: Special characters in CLOB are making report fail
Re: Formatting of HTML tag problem
I'm using BI Publisher standalone:Release 10.1.3.2. In one of the threads..
Re: Special characters in CLOB are making report fail
I came to know that data template cannot generate proper HTML tags for release 10.1.3.2. Is there any work around way to get the proper HTML tags when data template is used as a data set?
Thanks in Advance...
Edited by: user10280715 on Dec 9, 2008 3:13 PM

Issue could be with the data that is selected in the other environment. It generally happens that the ALV will not give the same results as in the DEV in the other systems.
Possible errors could be the control break statements in the loop...endloop block. validate the correctness of the control break stmts if any.

ID3 Tags Not displaying

Good Morning all,
I just imported a few hundered songs (MP3's converted from flacs) into iTunes and set up the artists, albums, genre, track #, etc. for each song. When I look at the songs in the music folder, these new song's tags do not display. I have several thousand songs and almost all of them have these tags displaying properly in the folder's columns. However, these songs do not. Is there a way to get the tags I entered in iTunes to show up for these songs in the folder without having to manually edit each one (there are hundereds)? I have never had this problem before. In the past whenever I edited a song in iTunes, the updated tags showed in my folder just fine. I am using windeows Vista. Any thoughts?

No one has any information on these?

Social Media Modules not Displaying

I am in the process of developing my blog and have placed the default social media modules into the blog. However, they do not display. Does anyone have any ideas on why this is happening?
Here's the sample page I'm trying to get them to display on. They should be above the comments section.
http://www.jennyfugadesign.com/blog/some-philosophical-questions

I have followed the addd social media help to the letter, and mine does not display either.
After using module insert
{module_facebooklike, moduleTemplateGroup="", language="en_US", url="", layout="", showFaces="true", width="450", verb="like", font="", colorScheme=""}
I checked the source on mine compared to Jenny's site, and notice my page does not have the Javascript portion of facebook code being
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = "//connect.facebook.net/en_US/all.js#xfbml=1";
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>
All get is this
<div class="fb-like" data-href="https://developers.facebook.com/docs/plugins/" data-layout="standard" data-action="like" data-show-faces="true" data-share="false"></div>
So the module is putting that in only.
Jenny I see you got yours to display, but I notice you seem to have a different URL than what the facebook plugin would provide. Is this because you also could not get the module to work, and just manually put in the FB code?
If not then how did you get yours to work.

Sharepoint 2010 - Home Page not displaying, all other pages work fine

The web page URL <server>/sitepages/Home.aspx is not displaying when accessed. All other pages work fine. We changed the default welcome page to another page, and that works. When we try to access the Home.aspx, it displays "An unexpected error
occurred" message. The Home.aspx only contains a couple of Lists, with Links, and a calendar. The other odd thing is that the Home.aspx displays in SharePoint designer in Advanced Edit mode, but won't display in a browser. Any ideas?

Hi Isepic,
1) Check the approval of the page (Home.aspx) whether it is in pending state .
2) OR might be some problematic webpart is added in the page. You can try to close it and access. To do that,you can try to access the web part maintenance page of home.aspx and test by closing the webpart one by one.
To access the maintenance page,pass the parameters ?contents=1 after the home.aspx
For example, http://site url/home.aspx?contents=1
3) Also,check the ULS logs after accessing the home.aspx to know what is happening.
Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem.
s p kumar

Tag not displayed

Hi all
I am running a script
BACKUP
INCREMENTAL LEVEL 1
FOR RECOVER OF COPY WITH TAG 'incr_update'
DATABASE;
RECOVER COPY OF DATABASE
WITH TAG 'incr_update';
After the backup is run. I issue a LIST BACKUPSET command.
RMAN> list backupset;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
10032 Full 7.55M DISK 00:00:01 29-JUN-09
BP Key: 10033 Status: AVAILABLE Compressed: NO Tag: TAG20090629T153750
Piece Name: /oracle_db/database/flashback/CDSDEV/autobackup/2009_06_29/o1_mf_s_690824270_54jnsgxc_.bkp
Control File Included: Ckp SCN: 8281502719147 Ckp time: 29-JUN-09
SPFILE Included: Modification time: 23-JUN-09
This output does not show the tag 'incr_update'. How would I know which tag is used if the script does not display the correct tag.
Thanks in advance

It's a tag of copy, not a backupset made for recover.
try
list copy of database tag='incr_update';
However, this: 'Piece Name: /oracle_db/database/flashback/CDSDEV/autobackup/2009_06_29/o1_mf_s_690824270_54jnsgxc_.bkp' it's a autobackup with only controlfile and spfile inside.
You can't specify tag for autobackup as far as I know, but You can search here:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#RCMRF107
cheers

JavaDoc issue: @see tags not displaying properly

I am having a very odd issue that I cannot seem to figure out. I am trying to add the following lines to a comment on a specific method:
@see javax.mail.internet.MimeMessage#setSubject(java.lang.String)
@see java.util.Properties#getProperty(java.lang.String)
My problem is, when the html is generated...it shows
See also:
MimeMessage, Properties.getProperty(java.lang.String)
I have both the J2SE and J2EE documentation linked so that these are linked to the source api on sun's site. When I click on MimeMessage it does send me to the setSubject() method within the MimeMessage class. So why does it not show MimeMessage.setSubject(java.lang.String)? Instead it just shows the class name. And why does Properties.getProperty(java.lang.String) properly show on the documentation but the MimeMessage class does not show the specific method it is linking to?

Here is my set of @see tags for this method:
@see javax.mail.Session#getInstance(java.util.Properties, javax.mail.Authenticator)
@see javax.mail.internet.MimeMessage#setRecipients(javax.mail.Message.RecipientType, javax.mail.Address[])
@see javax.mail.internet.MimeMessage#setSentDate(java.util.Date)
@see javax.mail.internet.MimeMessage#setSubject(java.lang.String)
@see javax.mail.internet.MimeMessage#setHeader(java.lang.String, java.lang.String)
@see java.util.Properties#getProperty(java.lang.String)
@see java.util.Properties#list(java.io.PrintStream)
@see javax.mail.internet.MimeMessage#setFrom(javax.mail.Address)
@see java.io.StringWriter#write(java.lang.String)
@see javax.mail.internet.MimeBodyPart#setContent(java.lang.Object, java.lang.String)
@see javax.mail.Multipart#addBodyPart(javax.mail.BodyPart)
@see javax.mail.Transport#send(javax.mail.Message)And here is what it outputs on the documentation:
See Also:
Session, MimeMessage, MimeMessage, MimeMessage, MimeMessage, Properties.getProperty(java.lang.String), Properties.list(java.io.PrintStream), MimeMessage, StringWriter.write(java.lang.String), MimeBodyPart, Multipart, Transport
I am using an ant build to generate the documentation, here is the javadoc target:
<target name="javadoc" description="Generates javadoc">
     
     <script language='javascript' src='./WebContent/js/javadocs/javadocBackup.js'></script>
     <delete dir="${backupdoc.dir}" failonerror="false"/>
     <move file="${doc.dir}" tofile="${backupdoc.dir}"/>
     <delete dir="${doc.dir}" failonerror="false"/>
     <mkdir dir="${doc.dir}" />
     <javadoc destdir="${doc.dir}" access="package" use="true" notree="false" nonavbar="false"
          noindex="false" splitindex="true" author="true" version="true" nodeprecatedlist="false"
          packagenames="us.or.state.dhs.*" sourcepath="${src.dir}" doctitle="${project.name}"
          windowtitle="${project.name} - API reference." stylesheetfile="../documents/javadocs.css"
          bottom="<script src='../../WebContent/js/javadocs/javadocTopBanner.js'></script>">
          
          <link href="http://java.sun.com/j2ee/1.4/docs/api/"/>
          <link href="http://java.sun.com/j2se/1.4.2/docs/api"/>
     </javadoc>
</target>It is just really odd that the classes within the j2se docs are displaying correctly whereas the j2ee classes are not. The j2see classes link correctly and point to the correct methods when you click on them. They just aren't displaying correctly as you see above with the 4 MimeMessage classes and the Session, Transport, etc.
Any help is appreciated, thanks for responding! :)

Netui Repeater tag not displaying any data

I have a very strange problem. I have a pageflow application that deals with collections and displays them using repeaters on jsp pages.
My problem is that there is one specific page that does not want to display the collection im populating in the pageflow.
I pass the data source as {pageFlow.collection} and it is acting as if the collection were empty, even though I have checked it not to be up to the line before the repeater declaration.
Has anyone faced a problem like this?
I need help.
J

Hi,
check the binding of your application. The form should show data right away and not only after the navigation buttons are pressed
Frank

Dashboard Images not displaying in Sharepoint

I have an Xcelsius which contains links back to a Windows Server Network drive which contains my images. These images are then displayed using the Sliding Picture Menu component in the dashboard using the URL link, and all is working as expected locally, when exported to .swf the images load properly.
When this .swf is stored in SharePoint the images are not displayed and the Sliding Picture Menu displays a broken link image instead.
Things I've checked are:
1. If I just load the Image location as a link into SharePoint the Image displays correctly.
2. If I run the .swf in SharePoint and edit the Flash Security settings to 'Always Allow' the directory which stores the images, the images do not display.
3. Tested with Fisheye component and Image component, same results, no image is displayed.
What else can I check?
Is this a cross domain policy issue?
Thanks In advance
Charles

Back up all data, then disable, or preferably get rid of, your third-party "firewall" or "security" software as directed by the developer. If you don't know which such software is installed, ask for further instructions.

Retirement of SharePoint Online Tags & Notes feature

Hi everybody,
Our Company has a challenge after the "Retirement of SharePoint Online Tags & Notes feature" was announced. The big question is: What should we use instead of the
Noteboard? We use the Noteboard under e.g. News Article Page Layouts.
I get the feeling that we can only use the Newsfeed as a Web Part in a Page Layout but we don't want to change this again when the
Newsfeed will be deprecated and Yammer will be the standard...
Other links:
Retirement of SharePoint Online Tags & Notes feature:
https://support.office.com/Article/SharePoint-Online-Tags-Notes-feature-retired-77851bd5-6d5e-42fe-9bf6-d7c17eeb771f?ui=en-US&rs=en-US&ad=US
"Say hello to Yammer"
http://office.microsoft.com/en-001/office365-suite-help/say-hello-to-yammer-HA104062139.aspx
"Pick your enterprise social network: Yammer or Newsfeed"
http://office.microsoft.com/en-us/office365-sharepoint-online-enterprise-help/pick-your-enterprise-social-network-yammer-or-newsfeed-HA104037368.aspx
What should we use now?
Thanks in advance!
Bas Jacobs

Good topic. We use Yammer as MSFT will eventually make it default social platform. Yammer need to improve a lot and not their yet in terms of authentication and credential sharing.
Regards Sudip Misra [email protected] +1-412-237-5435 Pittsburgh, PA

Sharepoint 2013 on premises Tags & Notes button in List and Document library is disabled.

Hi,
In My Sharepoint 2013 on premises installation Tags & Notes button in List and Document library ribbon is appearing as greyed out.
I have checked that managed metadata service, User profile services are running. Also have given required permissions to the logged in user.
As I came to know that Tags & Notes feature has been retired in Sharepoint online. Is this happening because of same reason as I have downloaded the Sharepoint 2013 on premises version recently or do I need to change some settings.
Please advice.

Hi Saurav,
pls check below
What version of SharePoint 2010 "SP 2010 Foundation or SP 2010 Server" you need to have SP 2010 server and to have the "User Profile service application".
How do you configure the "User Profile service application" did you add the "Social Tagging Database"
Create, edit, or delete a User Profile service application (SharePoint Server 2010)"
http://technet.microsoft.com/en-us/library/ee721052.aspx
When you access to "Application Management>Manage service applications>User Profile Service Application>Manage User Permissions" validate if the all authenticated users Group have the "use Social Features" checked.
Also validate in Central Administration in Farm Features if you have social tags and notes activated.
http://sharepoint.stackexchange.com/questions/17546/tagging-feature-not-working
https://social.technet.microsoft.com/Forums/office/en-US/c11cda96-091b-4b96-91bc-ccd8000238f4/tags-and-notes-sharepoint-2010-not-visible?forum=sharepointadminprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

Problem with display tags (not accepting inner tags)

Hi guys ,
I am using display tags which is fine but i had a problem with anchor tag and the jsp display tag.
<display:column title="Row_Id" >
' target="-blank" onclick=""><c:out value="${row_rowNum}"/>
</display:column>
here i got the exception:
The value of attribute "href" associated with an element type "a" must not contain the '<' character.
here if jstl is not used then how to put my value in anchor tag
please help me.

Can you use EL directly:
<a href="example.jsp?id=${row.id"/"></a>

SharePoint Social Newsfeed #tag not displaying

Similar Messages

Maybe you are looking for