Sharepoint with Autocad,ESRI GIS and Primavera files.

Hi All,
I need to integrate SharePoint with ESRI GIS, AutoCAD,Primavera files  and
support external storage repositories to store files larger than 1 GB such as ESRI GIS, AutoCAD and Primavera files. can some one help me!!!

Hello,
You should ask on the
SharePoint forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

  • What type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI.  will this load onto ipad?

    what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI.  will this load onto ipad?

    Per http://www.apple.com/ipad/specs/
    AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
    AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
    Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
    Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Run emigall with a "mig.object" and "input file" as parameters in a job?

    Hi!
    I'm looking for a way to run emigall with a "mig.object" and "input file" as parameters in a job. We will use emigall in a data load step of a process. Is this possible? Is emaigall designed for this use?
    Thanks for any help and suggestions.
    Best regards.

    Hi!
    I'm looking for a way to run emigall with a "mig.object" and "input file" as parameters in a job. We will use emigall in a data load step of a process. Is this possible? Is emaigall designed for this use?
    Thanks for any help and suggestions.
    Best regards.

  • I've moved an internal hard drive with all my music and library files to a new computer --- how can I get itunes to import the whole library while keeping my metadata?

    I've always kept all my music on its own dedicated internal hard drive.  Now I've got a new PC, finally made the switch to Windows 7 from XP, and I've moved my internal hard drive over to the new machine.
    I installed iTunes, but I'm having a heck of a time getting it to import the music and library files, keeping all my playlists and metadata.  Why is this so hard?

    If your New to You Used Mac is froom mid 2012 and originally came with Lion installed on it you will need to Reinstall that version using the Online Internet Recovery system and then at first boot of the new install use the Setup Assistant system to copy over all the data from your wifes old hard drive.
    To access the Online system at startup hold down the Command + Option/alt + r keys and keep them held down until you see a globe on the screen. From the resulting screen that cames up, Mac OS X Utilities, select Disk Utility and then the top most entry for the hard drive, left hand panel, drive model number and size, and then the Partition tab. Repartition the drive as One Partition, You Must do that to get ride of the Mavericks Recovery HD partition which is hidden. Name the partition Macintosh HD with a format of Mac OS Extended (Journaled).
    Once that is done exit disk utility and select Reinstall Mac OS X.

  • Windows 7 Compatability with Labview 8.0 and missing files while interfacing the FPGA with LV

    I am trying to use an FPGA (PCI-7830R) with Labview 8.0. The computer has Windows 7 OS. I installed LV 8.0 in the proper order with the FPGA Module and labview is able to see the FPGA when I open a .lvproj (the FPGA is in the tree) however there is a warning symbol next to the FPGA selection and when I try to open a .vi file that is used on the other stations in my lab (it works on all the other stations), labview is unable to find a whole bunch of files. There are some pictures.
    Missing File (there are a bunch more but this is the fist one).

    According to this LabVIEW Compatibility LabVIEW 8.0 is NOT compatible with Windows 7
    Visualize the Solution
    CLA
    LabVIEW, LabVIEW FPGA

  • Can I recover a damaged SQL Server 2008 database with the undamaged .mdb and .ldf files?

    Their original SQL Server was 2008, with SP unknown, but installed on D: and C: drives.  The power spike corrupted their O/S on the C:
    drive and someone reinstalled both the O/S and the SQL Server, which is now SQL 2008, SP4.  They have intact files for all system databases, both .mdb and .ldf.  Is there some way they can reconnect with the user databases using the intact copies
    of the previous system databases? I have heard that if the SQL Server is stopped, previous Master and Msdb .mdb and .ldf files moved into place and the server restarted, that any previous user database .mdb and .ldf files can be accessed by the SQL server.
    Is this the case, or are there details missing?

    Hello! try this steps
     1 Open your SQL Server Management Studio console. This application shortcut is available in the SQL Server directory in the Windows Start button.
    2  Enter the system administrator user name and password. SQL Server's administrator user name is "sa." This account is required for privileges to restore the database. If your restoring on a host provider server, use the administrator user name
    and password they supplied for your account.
     3 Right-click your database name and select "Attach." In the new window that opens, click the "Add" button to open a dialog box.
     4 Select your MDF file and press the "Ok" button. It may take several minutes to restore the database if it is a large file. Once the process is finished, browse your tables to verify the data. The database is now restored.
    If nothing helped try to use: 
    https://www.youtube.com/watch?v=1cbOYdvBW2c

  • Login problems with create pdf,share and my files

    Hello ,
    When I currently go to www.acrobat.com on my windows xp
    computer and try to go to one of the create pdf,share and my files
    and click on begin I get a message saying sorry this service is
    temporary unavailable but when I click on learn more it says all
    service are up and runing. Does anyone know what is wrong and if
    the service is down when will it be fixed.?

    Hi Sue!
    This seems like a separate issue you're running into. It is
    good that you can get logged in, but odd that you're only seeing
    partial functionality in your user.
    How many files are missing? Is this affecting certain file
    types?
    Did you ever see files in your My Files section?
    How long have they been unavailable/missing?
    When uploaded, did they complete making it through the
    scanning process?
    Can you see files in your Buzzword organizer? (which is a
    different section than your My files organizer)
    Create new documents?
    It would be good to get another browser as a comparison test
    here as well, to see if there is any different behavior!
    It could be firewall related, but what you could do is maybe
    try logging into your account from another person's computer for a
    moment, to see if the files are visible there?
    Otherwise, the test from home, or laptop at a coffee shop,
    would be another good test!
    Get back to us with some of these questions answered, and
    we'll see about getting you up and running!
    Cheers,
    Pete

  • How to work with two different backend with same MI Server and war file

    Hi All,
    We have a requirement that we need to work with one Middleware for two backends. For that we had to copy MAM30 sync bo's to zsync BO'S with the name ZMAM30. Now both sync BO'S will point to different backends.
    I have a standard war file which was working well with standards sync bo's. Now to work on zsync bo's what all the changes do I have to do in the standard war file(code).
    As per my knowledge we have a file called "syncbonamelist.properties" which maps the sync bo keys. Also there is another file called "mapping.xml" file which maps the package name with BO name.
    Can any body please tell me, are there any other files needed to be change like "meRepMeta.xml", other than any existing code like java objects are also needed to be changed.
    Your help in this regard is highly appreciable.
    Regards
    Murthy

    Hi Murthy,
    I try to get my head around the question:WHY?
    The reason for my question is, that this influences the answer!
    Because of several reasons it is NOT possible to handle MAM and zMAM Bos at the SAME TIME on the SAME MACHINE in the way you describe it - and it makes no sence to do so at all! But anyway......
    Lets say you have two backends, cause you have two different areas of the company. But both want to use the same MI server - but the client should be independend.
    So you need two apps. One uses the MAM BOs and the second one uses the zMAMBos.
    If this is the case, dev should be straight forward I think and you solution should work already......... so I ask myself, what is the problem you have? Do you get an error?
    - First create a new MEREPMETA-XML with just the zMAMBOs instead of the MAM BOs.
    - Change the two files you mentioned above.
    This should be all then.
    If you have a look into the implementation for MAM001Impl for example, there you find a line like:
         private static final String SYNC_BO_NAME
              = ResourceBundle.getBundle("com.sap.mbs.mam.bo.impl.syncbonamelist").getString("MAM30_040");
    This takes the name from the properties file and maps it to the real BO. So changing the name in the property file to
    MAM30_040 = zMAM30_040
    will result in MAM uses the zMAM BOs.
    Be aware: after you place the WAR file in the WEBAPPS folder and do a restart to deploy the file, you need to do a data reset to make sure the new MEREPMETA.XML is read.
    AND: two apps! one for MAM and one for zMAM BOs. One APP is not possible! Cause if you have something like that in the properties file:
    MAM30_040 = MAM30_040
    MAM30_040 = zMAM30_040
    if will only take the first reading.
    But I think this is clear to you anyway
    Regards,
    Oliver

  • Timestamp error with IR 9.3 and CSV Files

    Hi all, I'm new to this forum and getting used to all of the Hyperion functionalities. I'm trying to create a query that will give me the history of orders and for that I'm using CSV files as the source of information. I have date fields that when I select them returns me a formatting error: "12/18/2009 doesn't match date format: 1992-01-31 00:00:00". I assume that this is because the field format is recognized as Timestamp. Is there a way to change the field format from within Hyperion?
    Appreciate your help!

    How and where exactly did you make this modification? I moved from an old PC to a new one and my queries work great on my old PC but with my new one, I am getting this "doesn't match date format:" error. I didn't have to make any changes when I set things up on my old PC (at least not that I remember) and not sure what to do here. Any help would be greatly appreciated.

  • Issue with publish settings: html and swf files

    In Flash CS5.5 when selecting, Publish Settings: html and swf, the html file does not display the swf from the URL after ftp. The swf file, however, does display from the URL without the html file. My work around has been to hand code the html. Is this a known issue or is there something else that might be causing this to occur?

    Here are two examples created by two different students in the same lab using the same software configurations:
    http://www.miszxbrii.byethost13.com/howellanimatic.html
    The first frame of this one displays only.
    http://vaivadesigns.byethost3.com/YoungMidterm/YoungMidterm.html
    Here it is again with a new html page:
    http://vaivadesigns.byethost3.com/YoungMidterm/midterm.html
    The swf path was the documents folder and another folder on the HD.

  • How to send JMS Message with use title, content, and attach file

    I use OpenJMS server such as Message server
    and use Tomcat 4.0 as web server.
    I want to use JMS to send Message that message have
    title, content, and can attach file.

    You probably wanna use SOAP. SOAP is based on XML, it has a soapheader (can have the title) the soapbody (has your actual message) and it can also have files attached.
    read more here
    http://www.w3.org/TR/SOAP/
    The only thing you have to be carefull with is that when you want to put a SOAPMessage on a JMS queue, you have to serialize it
    kind regards

  • Help with how to read and write files to the applets server

    I am writing a form that requires some data to be written serverside(not on the host machine) and I also need to be able to read from those same files.
    Can anyone provide any help?
    I looked into signing but it seems, to me, that signing is for when you are going to be modifying files on the host...

    brianb7590 wrote:
    Would I use that to refer to the file like I would with a regular application?Nope. It's pretty complicated. You've got to set something up on the server to accept requests, get all the data and then save files somewhere and on the client side you've got to make the connection and send the data.
    Edited by: tjacobs01 on Apr 13, 2009 5:49 PM

  • Trying to write an Automator program to find files with same time created and change file names to matching source folder names

    I am failrly green when it comes to automator.
    I am trying to write an Automator program:
    Not sure where to post this
    trying to write an Automator program to find files and alter their names
    I have a source folder with correct named master files in it.
    eg. A0001_1234.mpeg
    time created 14:02:03
    date 07/07/2012
    Another folder where there will be copies of the master files in a different format with different names but created at the same time as a file in the source directory.
    they are created with a seperate device but they are
    A0000001.mp4
    time created 14:02:03
    date 07/07/2012
    I need it to then take the name from the source fies and apply the correct name to the matching file based on the time it was created.
    I can't seem to find actions in automator that reference time crated.
    Is this something I will be able to Do in automator?
    Any help would be great
    Thanks
    R

    Hi,
    It's impossible to do this without any script in Automator.
    Use this AppleScript script :
    set source to choose folder with prompt "Select the source folder"
    set anotherfolder to choose folder with prompt "Choose the another folder"
    tell application "Finder"
        repeat with tfile in (get files of source)
            set cDate to creation date of tfile
            set findFiles to (files of anotherfolder whose creation date is cDate)
            if findFiles is not {} then
                set tName to name of tfile
                set name of item 1 of findFiles to tName
            end if
        end repeat
    end tell

  • Problems with installation of system and support files with Labview 5.1 on Windows NT.

    I make installations disks with Labview 5.1 on Windows NT and I need to add some system files and other support files. When I'm in App Builder I choose them in "Add support files" and I mark their "custom directory destination" (c:\winnt\system32, c:\est\base) but, when I test the installation I see that files don't save in this directory, they save in 'C:\c\winnt\system32' and 'C:\c\est\base'. How can I solve this problem?

    Jorge,
    I know there were some problems with the LabVIEW 5.1 Application Builder that were fixed in the LabVIEW 5.1.1 Updater. I recommend you download that update to see if this fixes the problem. Also, double-check to make sure you have typed the file paths correctly. If you continue to have problems after installing the 5.1.1 updater, please let me know, and please attach your .bld file so I can examine it for any problems.
    Thanks for your patience on this issue, and have a pleasant day.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Working with NWDS...and property files

    Hi all.  I am trying to execute some of the examples in the Development & Extension Guide Tutorial and I have a question.  I am using NWDS and have built a new B2B application and deployed it, I am trying to add a new field and have made some modifications to the JSP by checking it out.  The next step is to modify the properties file to set the new fields label using the <ISA:Translate> tag.  The problem that I have is that the ISAResources_en.properties file is not in the NWDS projects.  I have not been able to figure out how to added it and have it deployed properly - I am new to NWDS.  I also see that many property and XML configuration files are not in my project in NWDS.
    Question:  are these files maintained outside of NWDS, or is there some way to get them included into the project?  I have create a new project under crm/home/shr/ext but I think I am missing something.  I would think these files would be maintained in NWDS, not manually so that they are versioned in the DTR.
    Any advice or guidence would be appreciated.
    DMM

    Hi Donald,
    All the properties files are available in web/b2b project under source folder in your NWDS.
    You will find the files with .xlf extension. When you open this file it will ask for the activity, Just confirm the existing activity or create a new activity.
    All these files are compiled into .properties files. You can see the properties files created when u try to change the .xlf file. all the changes are reflected in the properties files.
    Add a new key to xlf file is easy. Just click the add button and add the key name and value.
    You can even specify the key type also like lable etc.
    The general recommondation to keep the type is lable only.
    Regards,
    Sateesh Chandra

Maybe you are looking for