Sharing 60 min video, high res and export to compressor settings

I have 60 minute dance concert video shot HD on memory card.  Footage is 1920x1020.  I tried to share using quicktime and file summary says 8gb..it takes 2 hours to "share" as h.264.....last 2 attempts it says file to large to save .   To share as pro res (default) the file summary says 60 gb....should I get 32 gb flash or try to cut the footage into 2 projects, share separate and then try to merge during compressor?  If I get past this hurdle I have more questions to improve DVD quality......

martinstartin wrote:
...In the sequence settings window under quicktime video settings, if I change this to H.264 instead of HDV 1080i50, will this work?
Do not alter your sequence settings. Leave the as they are.
On File>Export>Quicktime Movie or File>Export>Using Quicktime Conversion you'll have lots of options.
One of them is indeed h264. Of which in the other post is said that it s supported with windows.
You could export as h264, then rename the clip from Clipname.mov to Clipname.flv
Then flashplayer (installed on most computers) can play it.
If you really want to go to .wmv you'll need [Flip4Mac WMV Studio|http://www.telestream.net/flip4mac-wmv/wmv-studio.htm] (or Studio Pro or Studio Pro HD)

Similar Messages

  • How do you change an iphoto size to 300DPI high res for exporting

    How do you change an iphoto  to 300 DPI high res for exporting to email?

    Short answer: the dpi is set when you decide what size you're printing at.
    Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
    Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing.  Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
    So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
    For more see http://www.rideau-info.com/photos/mythdpi.html
    To export: File -> Export.
    Regards
    TD
    Regards
    TD

  • I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

    I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

    video
    What version of Premiere Elements do you have and on what computer operating system is it running?
    Please review the following workflow.
    ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
    But please also determine if your project goal is supported by
    a. format of your source
    and
    b. computer resources
    More later based on details that you will post.
    ATR

  • Exporting 7 min. video from Aperture and received error.  How can I get the original back?

    I uploaded a video from my iphone 5 into Aperture and then I tried to export it to my desktop.  After I clicked on Export, it attempted to export for a while but then gave me an error message saying that 0 of 1 videos was exported and it couldn't export.  Now it shows the video in the album in Aperture, but it won't play and I can't do anything with it.  I have tried to recall the original but it says there is no original and it says there are no referenced files when I try to reference the files.  The clip also shows an arrow pointing to the right with a yellow triangle by it.  This is located in the bottom right of the image, right next to the video icon.  My concern is that I tried to export the original.  Any ideas on how I can fix this and get the video back?

    The clip also shows an arrow pointing to the right with a yellow triangle by it.  This is located in the bottom right of the image, right next to the video icon.
    Is that the badge you are seeing? Then Aperture has lost the connection to the original video file.
    Now it shows the video in the album in Aperture, but it won't play and I can't do anything with it.  I have tried to recall the original but it says there is no original and it says there are no referenced files when I try to reference the files. 
    You tried to reconenct and locate the referenced file? Then you probably imported the video as "Managed" and then the commands for referenced files do not work.
    Look directly into your Aperture library package, if the video is still there:
    Select the Aperture Library in the Finder and ctrl-click(or right click) it.
    Then select "Show Package Contents" from the pop-up.
    In the Finder window that opens scroll down to the "Masters" folder and open its subfolder "2013" and then go to the month and day, when you imported your video. Do you see your video there, or any imports at all?
    If you see the video in your library package, copy it to the Desktop, ad check, if you camn play it.
    What do you see?
    Regards
    Léonie

  • Is it possible to create a script to produce a high res and low res pdf and jpeg from Indesign at the same time

    Hi, I'm just wondering if there is a way to automate a long process I have to do to create assets for my job.
    I have a single page InDesign 6 file which I have to output three ways:
    A low res pdf without bleed or trims
    A high res pdf with bleed and trims
    A low res jpeg downsized to 2% of original size.
    If anyone knows if this is possible I'd love to hear from you.
    Thanks in advance

    Automation requires creating your own IDML script for output. Scroll down on this page to the section on Scripting resources. The text is a bit confusing. It says InDesign CS5 Scripting resources, but then the paragraph for that section says the PDF files are for CS6. I haven't read through these, I just found them by searching for "indesign automation". It does say in part that is can be used for preparing files for printing, so once you figure it out, it should be a single click option to do all three steps.
    You can do them now with the menus you have, assuming you also have Acrobat Pro installed. With any document open, choose File > Adobe PDF Presets, and choose either from the prebuilt defaults, or create your own in the Distiller. However, I don't see a way in the Distiller settings to choose whether or not to include bleed and marks, so I'm not really sure how you'd have them on for one and not the other. As far as JPEG output, that can be chosen under Export. You get a choice to set a resolution and JPEG quality level, but not a size, so the output will be the dimensions of the document.

  • Script to save out PDFs in High Res and Low Res and name them accordingly?

    Hello
    I'm on Indesign version 9.1. I previously had a script for this and have since had my mac wiped and re-installed (big company rules). So, here I am asking if someone can help me again..
    Basically I have to create artwork and nearly every time I have to export it as a 150dpi LOW RES version and then a 300dpi HIGH RES version with time marks, bleed, etc.  I then end the file name with either LR.pdf or HR.pdf. I have presets for these and obviously, it's not the worst thing in the world having to scroll down menus, etc but this is maybe up to 50 times a day. I used to be able to select an icon on my desktop (or wherever) then I used Indesign scripting and automator on the mac to press a kay command and it'd open the document, then save it out as the two designated PDFs, then close it.
    Can anyone help me on this?
    I can probably search on here for the previous thread asked and the script given to me...

    Adding somthing like below to Script 2 pdf outputs?
    var myLayer = app.documents.item(0).layers.item("Background");
    myLayer.visible = true

  • Embedding video in KN3 and exporting to SWF

    G'day.
    I have KN3 on a PB G4 with QT7 Pro and iLife '05. I'm using iMovie to create a credit role video for the last slide of my slide deck with the intention of embedding narration and exporting the whole caboodle to a SWF file. I'm having problems finding a video format that I can import into KN and then export to Flash: all the formats I've tried have caused the export process to puke and fail.
    I posted this to the applekeynote Yahoo! group earlier in the week and Brian P (waves) provided some useful pointers, but I'm still stuck. With that in mind, I'm wondering whether you guys could have a think on how I might do this.
    My question: how do I create video and import it into KN3 in a way that Flash export will be successful?
    Thanks very much.
    Cheers.
    Pete

    As far as I know, the Keynote export does not support video, only images and text (and, new with version 3, mp3 audio!).

  • Problem embedding video in Pages and exporting as epub

    I'm using pages 09 ver 4.2 (1008). I' trying to embed video (.m4v and .mov)  I can't find the checkbox  'Copy audio and movies into document'. The user guide says it's an advanced option on the 'save as' but my version of pages runnning on Lion 10.7.4 doesn't have a save as'- just a 'save a version. It apparently does auto save).
    I'm using Book Proofer to send the epub generated by Pages to my iPad. The strange thing is that some times the videos work and then I add another and one that used to work don't even appear when viewed on my iPad.
    Any one had experience adding video (eother m4v or mov files using pages and exporting as a epub?
    Thanks for any insights!
    Steve

    As far as I know, the Keynote export does not support video, only images and text (and, new with version 3, mp3 audio!).

  • How do I import a video in mp4 and export in QuickTime H.264?

    Or is that even possible? Whenever I try I get a error "Incompatible codec..."

    It's one file that was produced in a different video software that I used before purchasing Premiere Pro.
    Most of it is composed of a series of stills, though there is a portion that is video (mp4 from the old software). I'm assuming I might have better luck creating a new video and exporting it in that format by importing the stills and video and working with them in Premiere Pro.

  • Error -49 video rendering, compression and export

    I am having trouble compressing files from iMovie, When I try and "finalize" the video I get an error message. When I compress the video using quicktime H.264 and ACC the issues may be with rendering (?) I have managed to save a .mov file to my desktop but this goes juddery and the sound doesn't work when burnt onto a disc. Disc works fine when saving  as video but not when saving as a data (.mov) file.
    I have tried using internal burner software and also using toast (version 8) neither will produce good data files on the burnt disc.
    Any help?

    Im having error -49 (I have the time machine off, it has been like that all the time) and -108, but the one that appears more is -108, I've seem that is because of the space, but I have enough space base on the information of my MacAir.
    Im very new with this but I'm so frustrated with all these issues, cannot export a video of 16min and is just 69.9MB.
    Is there a way to know specific where are the problems in the video?
    I will appreciate all your help!!

  • Export thats high res and windows compatible

    Hi Guys,
    How do I export from FCP 6 for a windows compatible version of my movie? The settings are currently 1440 x 1080. In the sequence settings window under quicktime video settings, if I change this to H.264 instead of HDV 1080i50, will this work? I don't have a windows to check it on before it goes to client.

    martinstartin wrote:
    ...In the sequence settings window under quicktime video settings, if I change this to H.264 instead of HDV 1080i50, will this work?
    Do not alter your sequence settings. Leave the as they are.
    On File>Export>Quicktime Movie or File>Export>Using Quicktime Conversion you'll have lots of options.
    One of them is indeed h264. Of which in the other post is said that it s supported with windows.
    You could export as h264, then rename the clip from Clipname.mov to Clipname.flv
    Then flashplayer (installed on most computers) can play it.
    If you really want to go to .wmv you'll need [Flip4Mac WMV Studio|http://www.telestream.net/flip4mac-wmv/wmv-studio.htm] (or Studio Pro or Studio Pro HD)

  • How do you relink video from low res to high res and keep audio synced?

    Hello,
    I'm trying an offline to online workflow but my synced audio from my offline clips are not transfering to my online clips. Anyone have a solution?

    What workflow are you using to offline, sync and online the media?  What happens when you try to relink the media?
    Jeff

  • How do I get my videos imported 1080, and exported as 1080?

    I have no idea what I am doing wrong. I have a GoPro hero3 black edition. When I import I import into imovie, make my movie, and whenver I want to export to youtube, quicktime, as a movie, etc., it never gives me 1080 option. I upload it to youtube and the 720 looks like crap. Grainy and not what I see when I am editing the movie. I want to be able to have it be clear in 1080 but this is really getting on my nerves...
    Anyone?

    Oh, unless you shot tall.
    If you shoot vertical/tall video it cannot be zoomed all the way out in the exit.
    Shoot wide, or edit in a different editing app.

  • Canon 5D mark2 video: which preconfiguration and exportation / original

    please which sequence preconfiguration for project with canon 5D mark2 video (avchd 1080p30 or avc-intra or another?)
    and which exportation for create a video with the same original quality? (mpeg2?)
    thank you very much
    i'm french

    I'm amazed that the "I can't edit 5D Mark II video with Premiere" cries are still surfacing. C'mon folks, that problem was solved months ago. OK, it's true, you have to spend an additional $99 for a utility (I'll mention that shortly), but that's life, every software package can't support everything. The problem is partly QuickTime, don't 100% blame Adobe. If you bought a 5D2 and want to produce video, you need to be ready to invest in some things, no getting around it.
    First, the 5D2 puts out 1080p HD clips in H.264 at 30FPS, not the 29.97 NTSC standard. Keep that Post-It stuck on your forehead for a minute. Now, here's how to edit smooth and wonderfully in Pr CS4:
    Go to VideoGuys.com and buy Cineform's NeoScene for $99.
    Open your 5D2 .mov file with NeoScene, and hit Convert.
    NeoScene will produce an .AVI file that will easily edit in Premiere. The .AVI file will be bigger in size than the raw 5D2 file, and will be interpolated from 4:2:0 to 4:2:2 (8-bit to 10-bit), just FYI. It's interpolated, don't expect miracles, but to me the video looks a bit better.
    Import the .AVI into Pr and have fun. PrE should equally work I would assume.
    That's it, simple! BTW, someone mentioned VLC... yeah, it plays video smooth, and the video quality looks like a busted cellphone recorded it.
    OK, couple of items:
    If you record your audio to a .WAV separately like I do, just tweak your speed to 99.9% on the .WAV and all will be in sync. The 5D2 has rotten S/N ratio even with an add-on XLR converters; don't muck with on-board sound, just shoot your video on it. The Zoom H4N is a superb solution to record sound separately. OK, remove Post-It Note.
    I assume you have some horsepower in your PC. If you're running an older dual core with 1GB ram and a single hard drive, game's over. You need power to edit. Get on the Black Friday deals and get some form of an i7 rig if you can with at least ONE separate hard drive for your assets, and 6GB of ram minimum (12gb is better).
    Windows 7  Windows 7  Windows 7  Windows 7  Windows 7  Windows 7  Windows 7  Windows 7  Windows 7  Windows 7
    See #3
    Win 7 plays many formats natively. WMP plays my raw 5D2 clips as smooth as silk. It's also AVCHD native (Win 7 that is).

  • Best Practises ►Repurposing videos with Captivate and export as SCORM

    I'm new to Captivate and SCORM.  I have a series of 6 basic video Lessons (MP4s) which make-up one Course.  Lerners must complete (pass a summary quiz) each lesson before they can move on to the next.  We want to repurpose these files to create a more immersive UX.  I'm looking for a "best practices" suggestion for this work.
    Currently the plan looks like this:
    Re-edit existing videos into sets of smaller clips.
    Create Captivate project/s using the edited clips and adding other Captivate tools/features e.g. navigation, quizzes etc.
    The Captivate project/s will be exported/saved as SCORM package/s.
    We will up-load the SCORM package/s to Moodle.
    I'm very new to this, I've not yet created a SCORM-based Moodle project, and am not clear on how they "work," but that's for the Moodle forums.
    Should I create one large "Course" with Captivate that contains all of the content from all 6 MP4s?  This will require us to rely on Captivate's functions to control access to each lesson.  Each lesson has a summary quiz; learners must pass each quiz before they can move to the next lesson.  This one SCORM package is than imported into one Moodle course.
    Should I create six smaller "Lessons" with Captivate that contain only the content from one MP4?  This will require us to rely on Captivate's functions to control progress through only one lesson.  The summary quiz will be 'administered' by Captivate/SCORM.  When the learner passes the summary quiz the lesson is complete.  We will rely on Moodle's access control functionality to then provide access to the next SCORM package.
    If anyone has experience with this sort of project, or can offer some advise I would appreciate it.
    Thanks
    Larry

    While I cannot claim enough expertise to state these are best practices, I offer them as food for thought as you work out your implementation. We use Moodle and Captivate in combination. We do kindergarten to grade 12 curriculum and we realized that there is a huge number of lessons that can be repurposed for multiple grade levels and we also have more than one copy of many of our courses.
    What we decided to do was to use what would be equivalent to a repository for the lessons portions. These have interactives in them for practice of the new concept but they are not scored. Our many courses that use a particular lesson can then link to the one instance of the lesson from the repository. This saves us a lot of disk space, development time in new course builds, and if we need to fix or update the lesson we merely have to do it once. Those are huge benefits.
    Anything that will score to the grade book runs inside a course so the SCORMs can 'talk' to the course the student is in, so homework, quizzes, and tests are housed inside Moodle courses.
    We can place links to the repository lessons easily into the SCORM final landing pages of after the pretest or provide the ability to link to the lesson as feedback if a student is having trouble with a particular question.
    We are also starting a project of building interactive walkthroughs for each problem that will be housed in the reporitory. If students get stuck, they can be linked out to the walk through. This is a great way to do these because their homework will not have to be weighted down with a walk through for every problem. That will make them faster to load, but yet when they do need a walk through we can link them out from the SCORM to the deep and interactive added support for just what they need.
    So far, this setup has worked well for us. We are not expecting any major changes such as a new domain name on the repository. If your repository domain name or server structure for your repository is likley to be in flux, then this setup is not ideal.

Maybe you are looking for