Sharing a story with a touch device after Embedding web viewer content

I've been able to successfully embed my digital publishing suite application in a web page on our website.
http://www.equipmentjournal.com/digital_issues/?wv=s%2FEquipment%2520Journal%2F35dfd60870f 64065bcf2507eacc42abd%2FEJ%2520August%252019%2520-%2520Lifting%2520Equipment_iPad%2FCover. html
Now the problem is that when I click on the above link on an iPhone/iPad it won't work since the embedded web viewer is only supported on a desktop/laptop. How do I get share an article with an iPad/iPhone user?
I've read the article "Embedding web viewer content in your web page". There are two relevant sections ("Detecting a non-supported device" and "Launching the App"), and from what I understand you have to detect that there is a non-supported device in the javascript and then launch the app or send the person to the store to get the app. I am able to detect the non-supported app, but how do I launch the app?

Honestly... just wait a little bit. We will in the near future have something that makes this experience better for iPad users. You should give it a try and then decide if it is worth the effort of trying to do what you mention above for iPhone.
Neil

Similar Messages

How can I stop my IOS 7 device from sharing my location with IOS 8 devices?

How can I stop my IOS 7 device from sharing my location with IOS 8 devices? My friend who upgraded their device to IOS 8 said that I'm automatically sharing my location via iMessage details. I don't want to upgrade to IOS 8 yet because I don't have space. Is there a way to disable sharing my location with IOS 8 devices by default? I don't want to turn all location services off because I frequently use Google Maps.

Actually that's not true. I have a device (iPhone) running ios 7. My friend has an iphone running ios 8. When she clicked into her imessage thread with me, clicks on details in the top right corner it will show her my GPS location. It's doing this automatically because I do not have ios 8 on my phone therefore I don't have the ability to "stop sharing my location". Apple is automatically sharing the location. If you are using an ios 8, apple automatically pulls in location data for anyone you are messaging not using ios 8. I haven't found a way around this unless you turn off all location services on your phone which is immensely disturbing.

Can not take or watch photos + update my weather app with my flame device after updating to Firefox OS 2.0. - how can I solve this?

After updating the flame device photos are not saved anymore. I can see my old photos in the Gallery-list, but I can not click specific pictures anymore respectively the pictures do not appear anymore, when I click one. Also the update of my (german) weather app seems not to be possible anymore - the data download is not starting...
Can someone help me with these issues?
Best

Hi Heikschmi,
I'm sorry to hear that you are having issues with the camera and app updates in your Flame device, after receiving an update from the manufacturer, T2M.
Are you having issues updating other applications as well? What about recording videos in the camera app?
After reading the information provided about your issue I suggest a soft reset of the phone.
#Take the back cover of the phone off.
#Take the battery out.
#Take the SIM card and microSD card out (if applicable).
#Wait 10 seconds.
#Put the SIM card and microSD card back in (if applicable).
#Put the battery back in.
#Put the back cover back on.
#Turn the device on.
#Check if the issue you were having is still present.
You may also try uninstalling and reinstalling the weather application. Please report back to us if this solved your problem!
Thank you,
- Ralph

Issue with multiple digital signatures disabling fast web view

Hello, I'm using acrobat 9.1 pro and have some questions regarding an issue using multiple signatures on a pdf.
Why am I asking the question below? My job involves preparing pdf's for submission to FDA. The FDA requires, among other things, that electronically submitted docs have fast web view enabled.
I am currently exploring ways of using digital signatures to sign pdf reports and still make sure they are FDA spec compliant. My issue involves a document that would have multiple signature fields. What I do is create at least two signature fields in the doc and then save and optimize while enabling fast web view. When I sign the first box and save, the file retains the fast web view status. Yet, when I apply and signatures past the first one, the file is subsequently set to fast web view off without any obvious way of turning it back on. I am confused as to why it gets disabled only after the second, and not right after even the first one was signed. And, of course, I would like to know if it is possible to maintain fast web view and how to do it. I'll gladly accept "tinkering under the hood" of the file suggestions if they exist as well.
Please let me know if anything is unclear or you need further information.
Thanks for your time and help.
~Vlad

Hi Vlad,
Michael actual had the correct answer. The purpose of a "Linearized" file (i.e. a file that has been Optimized for Fast Web View) is to get the first page to display as soon as possible so you can start reading without waiting for the rest of the file to download. As an aside, the designated first page doesn't necessarily have to be page 0 (PDF's use a zero based counting system for pages), but usually it is. To quote the PDF specification, "The primary focus of Linearized PDF is optimized viewing of read-only PDF documents. It is intended that the Linearized PDF be generated once and read many times. Incremental update is still permitted, but the resulting PDF is no longer linearized and subsequently is treated as ordinary PDF."
When you sign a PDF file the first time the Save process is a "full save", that is the entire document is rewritten so there are no more than two %%EOF (end-of-file) markers in it. The first EOF designates which page to show first and the second EOF designates the end of the rest of the file (so the browser knows when to stop downloading). However, when you add a second (or subsequent) signature the file is saved as an "incremental save" and all of the new data is tacked onto the the end of the original file. This is so you can do a rollback to the previous signed version and allows Acrobat/Reader to check the integrity of each signature independent of any other signatures. It's the incremental save that breaks the linearized optimization of the file.
Steve

Problems with diacritics/accents and paging in web viewer

There seem to be some problems in displaying diacritics/accents in the web viewer (CR4E 2 update 4).
On viewing a multi-page report containing accents, when the report is paged forwards/backwards the accented characters are corrupted. This is easily reproduced by creating a report which contains nothing apart from text including accented characters.
The characters render correctly when exported to pdf.
Has anyone else had issues with accented characters?

Dealing with multiple MobileMe addresses (aliases) is somewhat different than with having multiple email addresses and aliases with other accounts. The SMTP for MobileMe will not accept sending with non-MobileMe addresses. See:
http://support.apple.com/kb/HT3379
and
http://docs.info.apple.com/article.html?path=MobileMe/Help/en/mm6b1a3de6.html
The next link covers what you have found for having comma separated multiple email addresses in the setup for other accounts:
http://support.apple.com/kb/TA23485
Ernie

Nano ver 6 doesn't show up even after reinstalling iTunes which had to be done because of problems with all Apple devices after trying to update iTunes via a message from Apple.

Nano ver 5/6 doesn't show up in iTunes even after having to reinstall iTunes because of problems with trying to update iTunes after receiving message from Apple that an update was available. Other Apple products are showing up.

Hello Bill,
Thank you for the details of the issue you are experiencing with your iPod nano. I recommend reviewing this article for steps to take when your iPod is not recognized in iTunes:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thank you for using Apple Support Communities.
Best,
Sheila M.

I shared a link with my daughter by messaging to her. Now I when I go to send her another message, Facebook quits! What can I do. I have reset, etc to no avail.

I shared a message with a friend. After that sharing, I cannot message my friend, Facebook and iPad just kicks me off. I have tried rest allying Facebook, resetting iPad...and still the same. Any suggestions?

Hi Luanfromal,
Thanks for visiting Apple Support Communities.
Be sure to try all of the steps found at this link if the FaceBook application quits unexpectedly on your iPad:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
Jeremy

How to get same order of appearance of photos in Iphoto album and album shown to IOS devices after sharing?

How to get same order of appearance of photos in Iphoto album and album shown to IOS devices after sharing?

Hello Leonie!
I use Iphoto sharing with my family on their ios devises. And it works.
The only problem is that, now, I try to organize the photos in a meaningful way (not chronologically) before Iphoto Sharing (Icloud)
But on the ios devices the photos is arranged chronologically.
Is there a solution?
MBP 2009
Iphoto 9.5.1
IPAD 3
7.1.1
best regards Joakim

TS2446 my ipod touch locked after several attempts with the wrong password. how to i reset?

my ipod touch locked after several attempts with the wrong password. how do i reset the password.

If it's showing the disabled screen due to too many incorrect passcode attempts then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPod and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPod into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Ipod touch won't sync with itunes, only iphoto after snow leopard update upgrade

Have just put snow leopard onto my mac book 4.1. Can't get my ipod touch 5.1.1 to sync with itunes. It syncs with iphoto every time, but no device comes up in itunes or in finder. I have the latest software updates on both mac & touch. Any ideas?

See the following. Do not forget the Additional Information paragraph.
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
The iPod will not show up in Finder.

I have a brand new ipod touch and when setting it will not connect to my home wifi, even though it is working with all other devices

I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.

What happens when you try to connect?
Error messages?
Does the iPod see the network?
Have you tried other networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections

TS2972 Home Sharing with ATV stopped working after upgrade to iTunes 11

After upgrading to iTunes 11, my two PCs are no longer visible to Apple TV or the iOS Remote App. I went through all the steps in "Troubleshooting Home Sharing" http://support.apple.com/kb/TS2972 without success. In additions, I tried:
Turning Home Sharing off, then on again on both PCs
Re-created Firewall rules for iTunes
Ran a factory reset on Apple TV
Disabled iPV6 on the network adapter, based on a blogger's fix for an iTunes 10 problem
Some other observations:
Home Sharing was working with Apple TV an hour before I ran the updates for iTunes 11 and Apple TV.
The Apple TV and iOS Remote App are working together, so the network settings must be correct.
The PCs in question are running Window 8 Pro 64-bit and Windows 7 Pro 64-bit
The two PCs can see eachother's iTunes.
It seems likely this is an iTunes 11 issue, but upgrading ATV2 at the same time clouds the diagnostics.
I was just about to order two more Apple TVs, but now have second thoughts now that my ATV2 is just a doorstop.
Any suggestions?

You are not alone with issues related to the e1000e (but all they concluded was that reloading the module makes it work again):
https://bbs.archlinux.org/viewtopic.php?id=145564
It seems like this is more your issue:
http://permalink.gmane.org/gmane.linux. … devel/8932
But if none of those boot flags work for you, then there's not much you can do, and you'll have to write a script to reload the module each time after initial boot finishes I guess until the module gets fixed.
Also, power management of the PCIe interface causes the e1000e to shut off after a while as well (lots of people on CentOS noticing this):
http://serverfault.com/questions/226319 … ie-aspm-do
So you can use that boot parameter to stop that from happening, if that becomes an issue for you as well.

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

Additional testing i perform to make wifi work but nothing works out:
i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
wifi was working with older software versions. i think there should be a problem with 8.1.1.
is anyone has fix for this issue?

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

Sharing a story with a touch device after Embedding web viewer content

Similar Messages

Maybe you are looking for