Sharing a tab, with 2 parent tabsets

how can we share a single tab with more than one parent tabset.
Thanks Ash

Not possible. Each Parent is an independent tree.
Regards,

Similar Messages

Can't grasp the relation between tab set, parent tab, standard tab set and standard tab

Very novice to apex application building, but after trying to figure the concepts behind the tab sets I'm getting more and more confused about it as I always get different behaviour when changing things.
The documentation is not very clear on this.
Is there someone who can explain this in a comprehensive way?
It would be nice to have a view on the consequences of using these different levels of groupings.
Any help will be dearly appreciated ;-)

Jan
One level tab application
Tabsets are used to group standard tabs.
Use full when splitting up the application in different sections. Much like how the apex is split up in the application builder, sql workshop, team developend and administration.
Parent tabs aren't used. And a one level tab application can't be turned into a two level tab application.
Two level tab application
Parent tabs belong to only one tabset "main".
The standard tabset is the connection between the parent tab and standerd tab.
There is one standard tabset for every parent tab.
The standard tabset in the two level application has the same function as the tabset in the one level application.
The standard tabset also determines when a parent tab is current.
When on the page the setting Standard Tab Set is set then the parent tab belonging to that standard tabset is current.
This means that if you change a page form one parent tab to an other you not only need to change the tab settings. But also the settings on the page.
If you still in the position to choose between list or tabs as your main form of navigation I would recommend using lists.
The possibilities with the list templates are greater that with tabs.
Tabs have a maximum of two levels. List don't have such a limit.
If you created your application as a one level tab application you can't turn it in a second level application without some serious hacking.
Clicking on a standard tab submits the page and branch after the computations. This could also be viewed as a pro for tabs because with list navigation your page needs to be accessible by url. Did isn't necessary with standard tabs making them more secure. Parent tabs also use an url to navigate.
Only the standard tabs belonging to the current standard tabset are rendered making a drop down menu impossible.
Hope this clears up some of your questions.
Nicolette

Firefox could not open 300 new tab with content loading

Dear All,
Thanks for good support in web browser world.Directly i come to the question.I have excel sheet where it has 300 hyperlinks as given below(example links 3)My Excel macro is written in such a way that this will open all the link in firefox "new tab " one by one.It was perfect and page was loading in previous versions(i could not remember the exact version but i could say an year before when i used firefox it worked well).Now i am having issues opening 300 new tabs with links.It gets started loading the page but before one page loading gets completed too many new links are opening but the page is not fully loaded at all.When i click the tab for each link and see in the browser the green clour processing round sysmbol keeps on rotating.Can you please look into this issue.
If you want i can be contacted through email or if the information is not clear i am ready to connect through web sharing or to have a call.If you want spreadsheet for testing this issue i will send it.
Link Used in Excel sheet example : 300 links in same site with differrent page:
http://chartink.com/stocks/RECLTD.html
http://chartink.com/stocks/bpcl.html
http://chartink.com/stocks/itc.html
Expecting your positive reply at the earliest.Thank you!
Regards,
Marx
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

Hi Marx,
With this kind of data testing it is helpful to provide context to the issue you are trying to document. This technical information is very useful to the engineers working on the performance of Firefox and I am sure this is the kind of information they would love to see.
Therefore I would like to put you in touch with this team to see what they can do with this information. Talk to the #perf channel in irc and they should be able to put you in the right direction. I am asking currently and see what I can find. Or in the meantime check out the current tab bugs in the Performance component of bugzilla provided in the search below: [https://bugzilla.mozilla.org/buglist.cgi?quicksearch=tab%20performance&list_id=9361049]

So for the past two years I've shared an iTunes with my sisters. This year i want to take my iPhone off, but keep my music. How do I do this?

So, for the past two years I've shared an account with my sisters. This year I got my own laptop and I want to take my device off that iTunes, but still keep the music I bought. How do I do this?

You should be regularly importing your photos on your device to your computer. That is where all of your photos should be permanently stored. What is on your device is selected when you do a sync to iTunes. Once you select your device, you click on the Photos tab, and select which photos, albums or events you want specifically downloaded to your phone. If they have all been backed up to your computer, then you will be able to select whichever ones you want on your new device.
Contacts would be backed up as a part of the backup process to iTunes. Here is a support article with specific information about what is backed up:
http://support.apple.com/kb/HT4946
Cheers,
GB

Safari can't connect to server with parental controls on

I have one user with admin rights and one user plus guest with parental controls turned on. Recently when parental controls are turned on, I get 'safari can't connect to server' error. When I turn parental controls off again I can connect to the internet again. Why is this?

Hi and welcome....
Unfortunately, Parental Controls can only be enabled on a non admin account.
See if there's a proxy set up for Safari. From the Safari menu bar click Safari / Preferences then select the Advanced tab. Click "Change Settings" next to: Proxies.
That will launch System Preferences / Network - Proxies.
If there are any boxes checked under: Select a protocol to configure, deselect the box then click Ok.
Quit Safari (Command + Q) then relaunch Safari.
See if Safari can connect in a parental controlled user account.
Carolyn

How to craete tabs with dashboard elements

Hi,
Please can anyone suggest how to crate tabs with user created dashboards? If I have created some dashbords and want it as a tab,how to do that?
Thanks
Arpita

Arpita, click on the following link:
http://www.box.net/shared/6xfb17qgv8

3 blank tabs with strange addresses open by themselves

Hi
Since the past 3 days, I'm experiencing a problem whenever I open Safari (When it's not running), 3 blank tabs with strange addresses open by themselves. Here are the addresses that may help someone explain how to solve the problem:
http://iqavu79a908u5vcecp0pq80hhbhkv33b.a.friendconnect.gmodules.com/gadgets/ifr ?url=http%3A%2F%2Fwww.google.com%2Ffriendconnect%2Fgadgets%2Frecommended_pages.x ml&container=peoplesense&parent=http%3A%2F%2Fwww.iphoneislam.com%2F&mid=0&view=p rofile&d=0.546.6&lang=ar&communityId=17458635724211752387&caller=http%3A%2F%2Fww w.iphoneislam.com%2F%3Fp%3D4072#st=e%3DAOG8GaCuOrPiKAZ1Bb%252FM%252Bhlo4OZWLH69O EPJ9xGJQQ1gQUz5wQ4nxIJICUpIVEOgbEUrhWG8SSJKYkUyapqov6BGORdWgk07NMKfBUCJvQELk%252 FzxIaMml%252FF1zN%252FVu1Nf9z36e9YSGVUEMovY95zYF9Zz8rIEj%252Fdvw6hlKnSuJrhEHFnFG YGCwppSxq4Owv3NKdOpABINBjoG3NsZIvPa%252FeRw3%252BGqW%252BGL2nO%252BxJk%252FKy1Fe TZdphHdIRs%253D%26c%3Dpeoplesense&rpctoken=881409266&
http://p7rjrrl49ose4gob99eonlvp0drmce3d.a.friendconnect.gmodules.com/gadgets/ifr ?url=http%3A%2F%2Fwww.google.com%2Ffriendconnect%2Fgadgets%2Ffriendbar.xml&conta iner=peoplesense&parent=http%3A%2F%2Fwww.iphoneislam.com%2F&mid=2&view=profile&d =0.546.6&lang=ar&communityId=17458635724211752387&caller=http%3A%2F%2Fwww.iphone islam.com%2F%3Fp%3D4072#st=e%3DAOG8GaD3uo1tLKOsOXCrQVSU2R9aPv1CKL3e0vmvXCD4DjiEL JD1RXcGyqbN5qSKw1EwpQvgn2zeQ8gwjvRJJIyhb3Aa2ijNJQLwi3jQknhQLCkbvj4L3s%252F004gw6 tsvNaI%252BA1GVPBt88l8srzgtM2XSZsS9C8j3rHnWgui5fcrJYya3v5WjLq5zjeblFVed%252BO3X1 HrgLUv9Dm1D1dt31fGnwvCwpbdf0Fhi3ui%252FaggaY106SVAfeTg%253D%26c%3Dpeoplesense&rp ctoken=125955072&
Please Help it's really annoying, my Safari is version 4.0.5 (Mac)

HI,
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset. Relaunch Safari. If the problem persists, go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Since you are running Snow Leopard, try running Safari in 32-bit mode, not 64. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
  Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
Carolyn

Sharing a folder with other users on the same machine (SOLVED)

Hi,
Recently, I've been sharing my computer with my dad. I don't want him to use my account, since I have a lot of secret files and bookmarks on my profile. However, I would like to share all my music with him. What I did was to set the permission of my Music directory to 777 and using root create a symbolic link from my own account to his account. But then when I log into his account, it says the folder is corrupt.
Then I created a symbolic link from my music directory to /media/ and set the permission to 777. Again I tried to see if I can access it from my dad's account and got the same error.
What's the best way of creating common folders between users in a linux machine?
Note that, since I use Amarok, I don't want to move my Music to somewhere else, because it will mess up with the database info of songs.
EDIT: I solved the problem by using mount instead of symbolic links.
You have to issue the following command:
mount --bind /home/name/music /media/music/
Of course you have to execute this command whenever you boot the computer. Just place this command in rc.local and you're good.
Thanks
Last edited by mohtasham1983 (2009-11-05 22:06:03)

grey wrote:If I wanted to share it between different users, I wouldn't put it inside one particular users home directory. Just use a reasonable place that is not used by the system, like /usr/local/data, /var/shared or so, give it the desired permissions and that's it.
you are absolutely right and i recommend this as well.
grey wrote:The link will probably not work, because in order to read /home/yourname/music, you need to be able to read /home/yourname. That is even true if root created the link.
that is true for symbolic links, not bind mounts. a bind mounted dir doesn't care about the parent directories because your not traversing to it through a link, it's just 'there'. this is how i put folders under my ~ out on my http server.

Firefox won't open .ppt downloads. Instead it merely opens a new tab with nothing in it. How do I fix this?

I used to be able to open .ppt files on webpages with Firefox. But now they don't open. Instead, Firefox opens a new tab with nothing in it. I have already checked the settings for which programs are to be associated with which files, but it is still not working.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Help me sync all my iPhone's tabs with Mac - beginning to despair!

Hi,
iPhone 4S 16GB, White, iOS 6.0.1; Mac Pro 2010, Mountain Lion 10.8.2 Supplemental Update 1.0; iTunes 10.7 (I am NOT upgrading to iTunes 11).
I can't get all the aspects of my iPhone to sync with my Mac Pro without receiving the dreaded, "Do you want to erase this iPhone…" dialogue. At the moment, the iPhone currently syncs Apps, Podcasts, iTunes U and Photos with the Mac Pro in question. I'm trying to get it to also sync Tones, Music, Films, TV Programmes and Books.
This is such a convoluted process that I'm not sure where precisely to begin. I'll start with my last Restore From Backup, which was for the purposes of restoring this replacement iPhone with the contents of the pre-replacement's backup.
1) Attached iPhone to my Mac Pro via USB
2) Right-clicked iPhone in iTunes Sidebar, chose "Restore from Backup…" and selected the previous iPhone's last backup
3) After the Restore was complete, I immediately went to the Apps tab and checked, "Sync Tabs". This is crucial in order to restore the third-party apps that were on the phone when it was Backed Up so that they will be associated with their data.
4) During this process, I also checked all the rest of the tabs, but only Podcasts, iTunes U and Photos synced successfully. All the others (Tones, Music, Films, TV Programmes and Books) came up with an error message. Which one, I'm not sure, but probably the one that declares these tabs to be synced with another computer, and asks, "Do you want to erase this iPhone…". I'm confident it was, actually, because I recall thinking how daft it was that, right after a Restore from Backup, it was telling me that the iPhone was synced with another Mac. Madness…
After steps (1) through (4), my phone was back to its pre-replacement state (more or less, but let's not go there). Because there was still media I required to add to the phone, I unplugged the iPhone from the Mac Pro, and attached it to the Mac mini. When I attempted—purely as a troubleshooting measure—to sync the Tones, Music, Films, TV Programmes and Books from the Mac mini, I received the following messages after ticking each checkbox, respectively:
With each dialogue box I clicked Cancel, because there was no content available to sync anyway.
So, neither of the two Macs that I own will sync Tones, Music, Films, TV Programmes or Books with this iPhone without erasing existing content. Why? Having seen this, I went back to my Mac Pro with the iPhone, and attempted to sync Tones again. It asked:
That gave me hope, because it wasn't claiming to be about to delete "all existing songs, films and TV programmes" as it did on the Mac mini: just Tones. So, I hit "Apply". The result?
Not only that, but the Capacity guage at the bottom of the window indicated that I was about to lose 1.74GB of Audio data, despite the fact that the only tone on the iPhone amounted to less than 1MB in size.
Apple has created the most sadistic syncing system I've ever encountered, and the one most eager to delete a user's data.
Can someone please tell me how to make my iPhone sync the remaining unsynced tabs with the Mac Pro? This is the Mac that contains all my media, so the Mac mini is pointless even if it did work.
Caveats:
• Please, only offer genuinely tested solutions and not conjecture.
• Please, don't request I make any arbitrary changes that may lead to data loss, at least without good reasoning.
• Please, don't ask me to get in touch with iTunes Technical Support—down that avenue lies more incompetence than I can bear.
• AppleCare Telephone Support for my iPhone has expired, so please don't suggest I get in touch with them either.
Thanks

1) Please read all of OP's original post before replying.
I can see this thread going south fast…

How can I use a shared library made with the application builder?

Hi,
I am using LabVIEW 7.1 running on Slackware 10.1 (kernel 2.4.29) and I am trying to call a graph display from a C program that I use for debugging VME access from a VMIVME controler. So using the application builder I built the VI as a shared library (graph.vi -> graph.so) containing a function called "graph". In my main program the call to the dlopen fails with the error: "graph.so: undefined symbol: UninitLVClient". When I examin graph.so with nm I see that UninitLVClient and other LabVIEW functions are indeed undefined and using ldd shows that graph.so has dependencies only on libc.so.* and *linux*.so.* but not on LabVIEW related stuff. Those functions are defined in the liblv.so that's in the cintools directory but I have no idea if the user is supposed to use that.
So I think I am missing an important concept here. Can somebody help or direct me to some documentation (I found lots of information about how to link external code to LabVIEW but nothing about how to link LabVIEW code to an external program)?

Thanks Watermann,
your message has been very useful so now I am linking to the proper library but I still have problems when trying to load dynamically the shared library produced with LabVIEW. It is strange that I could successfully load the lvrt library at loading time but it does not work when I am loading the library at execution time.
I made a small LabVIEW program that prints a hello window and I am calling it from a C program. In the first program main.c I am linking to the lvrt library at loading time and it works but in the second one I am linking dynamically at execution time and it does not work. For my work I need to be able to load code done in LabVIEW at execution time. Any help is appreciated!
Program main.c:
// small program to call a LabVIEW shared library
#include
#include
#include "hello.h" // got this from the LabVIEW builder, i.e. when I made the hello.so
int main(void)
printf("Hello from C!\nLets call LabVIEW now\n");
hello();
printf("Bye ... \n");
return 0;
The command to compile main.c, i.e. linking shared library lvrt when loading main program:
gcc -Wall -I /usr/local/lv71/cintools/ -o main main.c hello.so -l lvrt
The LD_LIBRARY_PATH has been defined and exported:
$ LD_LIBRARY_PATH=$PWD
$ export LD_LIBRARY_PATH
IT WORKS!
Program main2.c:
// small program to call a LabVIEW shared library
#include
#include
#include
int main(void)
void * h_lvrt;
void * h_hello;
void (* hello)(void);
char * error;
printf("Hello from C!\nLets call LabVIEW now\n");
// open LabVIEW RunTime shared library
// in my computer located at /usr/local/lib/liblvrt.so
h_lvrt = dlopen("/usr/local/lib/liblvrt.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
printf("error : could not open LabVIEW RunTime library\n");
printf("%s\n", error);
return 1;
// open hello shared library
// in my computer located at /home/darss/lv_call/hello.so
h_hello = dlopen("hello.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not open hello library\n");
printf("%s\n", error);
return 1;
// get function hello from library hello.so
hello = dlsym(h_hello, "hello");
// check for error
error = dlerror();
if (error) {
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not get the hello function\n");
printf("%s\n", error);
return 1;
// call hello function
hello();
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("Bye ... \n");
return 0;
The command to compile main2.c, i.e. dynamically linking library lvrt at execution of main2 program:
gcc -Wall -o main2 main2.c -l dl
The LD_LIBRARY_PATH still defined and exported.
IT DOES NOT WORK!
Program output:
Hello from C!
Lets call LabVIEW now
error : could not open hello library
/home/darss/lv_call/hello.so: undefined symbol: WaitLVDLLReady

HT4859 I shared itunes account with my daughter, had never synced my phone with computer, synced with computer and chose daughter's phone instead of create new phone, all phone contacts are now gone replaced with daughter's - is there no way to get contac

I shared itunes account with daughter's phone, never synced my phone with home computer through itunes, synced tonight with itunes but choose her iphone and it restored all her info on my phone, all my phone contacts, text messages and photos are gone - I had auto backup to icloud daily - is there any way to get phone numbers and texts back off icloud?

If you have been backing up to iCloud your camera roll photos, text messages and other data and setting should be contained in the backup. Restoring the backup to the phone should recover them.
To do this, go to Settings>General>Reset, tap Erase All Content and Settings (which will erase the phone), then go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup and follow the prompts. Be sure your phone is connected to wifi and your charger as this may take some time to finish.

Should I switch from shared iCloud account with wife to two separate accounts with family sharing?

My wife and I have always shared 1 iCloud accpunt between our our 5s phones, iPad, and an old 4s which is now just a toy for our toddler. With ios 8 I am not sure if it is possible or practical any more. We do it to share purchases and the photo stream and a Google calendar.
With ios 8, it seems to be impossible for both of our phones to share their location. From what I can tell, only 1 device at a time on the icloud account can share its location. Is that a correct assumption? And icloud no longer gives the option for each of us to sign into separate itunes accounts on find my friends. We are forced to sign in with our 1 shared iCloud account. So we can no longer use find my friends to see each other's location.
So has ios8 rending sharing an iCloud account useless? I'm wondering if we now need to have separate accounts and link them with family sharing. Will we lose the benefits of having our 1 shared account? I just wanted to make sure we wouldn't lose anything if I set her up with a new account and linked it with family sharing.

I have lots of questions about this and other things too; I have been sharing my account with my wife and daughter for years through 10s of iPhones and iPads and with the introduction of IOS8 we are having lots of new and not so fun problems.
As to your question about location. I have three iPhones and one iPad using the same account now (on IOS 8) and all four devices show up with Find my iPhone. My wife's was not showing up today but I went in and turned on the new feature "Send last Location" and all of a sudden her phone was able to be found again. Not sure if that will solve your problem but just wanted you to know that I have the four devices all showing up in Find my iPhone with a shared account.

How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
Or can I? Does anyone have a solution I don't realize exists?
Thanks,
Sowelu

AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs"; take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example. An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

Sharing iTunes library with other users (on Vista)

I'm posting this for my sister who just purchased a new computer running Vista. She's set up a user account for herself as well as one for each of my two nephews. We've successfully moved over her iTunes music folder from her laptop and can now access it and listen through her account.
However, we'd like to set it up so that my two nephews can also listen to the music from their user accounts. My oldest nephew also has a shuffle that would sync to it.
I've found a link to information about sharing, but I still need to clarify a few things.
Here's the link:
http://docs.info.apple.com/article.html?artnum=93195
On this page, it describes how "to share your music with other accounts on the computer" and also how "to listen to another account's music files".
Exactly how are these two things different? I'm pretty sure that I probably want the first of the two, but I'm not positive.
And once we successfully set this up, would we have to sync the shuffle via my sister's main account or could it be synced from any of them?

Let's answer your second question first ...
And once we successfully set this up, would we have to sync the shuffle via my sister's main account or could it be synced from any of them?
Any of them.
... and your first question second.
Exactly how are these two things different?
The first part - sharing your music with other accounts - makes the music available to the other users on the computer.
It is then up to the other users to decide whether or not they want to make use of the available music, hence the second part - listening to another account's music files - which, as the article says, must be repeated "for each account that is listening to shared music."

Sharing a tab, with 2 parent tabsets

Similar Messages

Maybe you are looking for