Sharing across 2 home netowrks

Hello,
I have both an ethernet network and an home network. The problem is the airport sets up it's own network (10.0.0.x) than the ethernet network (192.168.15.x) and I'm wondering if there is anyway to share a single iTunes library across these networks. Barring that, is there a way to force airport to not create its own network and to use the same one as my ethernet router?
thanks,
Jeff

*is there a way to force airport to not create its own network*
Turn it off.

Similar Messages

  • Problems sharing across two computers on home lan

    I must be doing something basic wrong. The instructions for sharing a downloaded digital edtion sound very easy in the help manual but following those directions I am not able to share a book across two computers on my home lan.
    Both computers have been authorized by my user id. When I open the menu item on Library menu/Authorize computer
    I'm told the computer is authorized and my UID is shown. However when I attempt to `add' the book I get a message saying:
    > This document cannot be opened on this machine.
    > Please contact the site where you obtained the document
    > to download another copy.
    I just bought the book today not more than 2 hrs ago
    The `knowledgbase' help for digital editions is completely useless and returns no hits regardless of what I type in the search field.
    What else do I need to do to share a book across two home computers?

    Harry
    You shouldn't need anything else. The common problems (after you have gotten past the authorization) for sharing are:
    - You copy over the .etd file instead of the .pdf file.
    - You copy over the .pdf file from /Digital Editions/ebx_backup instead of /Digital Editions. (My best guess, given the error message).
    - The file was purchased with only rights to view it on a single machine.
    The not so common and more worrisome case would be if the License was not being correctly written into the file after you purchase it.
    I would suggest that after verifying you are copying the correct file, you should open up a web support case, so that Bentley can track this, and help us gather all the correct information so we can figure out what is going on.
    Sorry you're having problems
    Jim Lester
    Adobe Systems

  • TS2972 I cannot seem to get all of my music shared across the network from my MacBook Pro to my iPad. This was not an issue a few days ago. Can anyone help?

    I cannot seem to get all of my music shared across the network from my MacBook Pro to my iPad. This was not an issue a few days ago. I can see all my songs if sorted that way, but if i sort by artist, only a few of them are present. Can anyone help or have any insight?

    Well I didn't think of it before, but I logged out of my apple ID othe iPad's home sharing. The I logged back in and it worked. It's a little weird, but I will take it. Thanks!

  • How do you configure the DAM so it can be shared across multiple CQ instances?

    How do you configure the DAM so it can be shared across multiple CQ instances?

    You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
    clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
    But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
    Yogesh

  • How are "Internet Accounts" shared across Macs?

    I use several Macs (office, home, notebook). I noticed that when I add a new account in "Internet Accounts" on one of the Macs, it may appear on another Mac or may not even if I'm signed in iClouds with the same Apple ID. I wonder how I can control whether a newely added Internet Account is shared across all my Macs.
    Sorry for a trivial question, but I could not find any info on this.

    Hey there zornie,
    It sounds like the features you are describing are part of iCloud Keychain.
    iCloud Keychain can also keep the accounts you use in Mail, Contacts, Calendar, and Messages up to date across all of your Macs. If you're signed in to Facebook, Twitter, Linked In, or any other accounts in Internet Accounts on OS X Mavericks, iCloud can push those accounts to your Macs as well.
    From: iCloud: Frequently asked questions about iCloud Keychain
              http://support.apple.com/kb/HT5813
    If you would like one of your devices to not automatically have accounts setup with iCloud Keychain, you would have to turn off the feature in your settings.
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Thank you for using Apple Support Communities.
    Take care,
    SterlingD

  • My folder of playlists is showing up on my phone, but is no longer in itunes! How can I get them back into itunes to synch with my ipad? Sharing on our home network is enabled.

    I'm relieved the playlists (there are 11 in the folder) are still on my phone, but I can find them nowhere in itunes. Other playlists are still there- just that one folder has disappeared. I synched my new ipad to the library, and when I did, the playlist was not one of the options in itunes.
    Background: I have enabled sharing on our home network, and I haven't moved the locations of itunes files or changed anything with my computer, the settings, or my itunes login (apple id).
    My goal is to restore the playlists from my iphone to the itunes library on my laptop so I can then synch the playlists to my ipad.
    Thank you for your help!

    Music is not included in the backup (and nor are films or tv shows), only the contents of third-party apps are included. Did you not do File > Transfer Purchases when connected to your computer's iTunes to copy your iTunes purchases over, and/or have you not got a backup copy of your music somewhere e.g. on an external drive ?

  • TS2972 enable my tv entertainment provider on my home network - then updated "a newer" modem and now home sharing just stopped home sharing

    Only 2 changes to my home network set up: #1 - I installed a "new model modem" recommended by my ISP provided, and #2 I had my tv entertainment provider install their modem to the TV receiver box for accessing my home network and now home sharing will not home share. 
    I original had enabled, and all devices are still set up for home share - that's laptops, iphones, ipods, and ipads.
    Any suggestions?  I understand these modem most have ports 123, 3689, and 5353 opened for itunes and the home sharing.
    Now I am stumped on how to verify these settings.
    Is it possible for me to verify these ports on these modems; how?  Or is it just wiser to contact these providers and have their technicans investigate this issue?  OR is it possible I am missing an even easier route to cure this ailment I have created unintentionally in my quest for connectivity between all things electronically capable and on the same secure network?
    Oh, using PC w/WDW7 if this helps, and one other annoying detail, which confuses this entire issue of mine, the Home Share, pops on for a few minutes, and then disappears.  So yes, I am confused, it is there, and then it is not!.

    Scan the Support Community sites. Apple TV losing connection is prevalent. The many postings point out the problem occurs with Apple TV1,2and 3; with different brands of router including Airport Extreme; from current and past versions of iTunes; after varying periods of working well.....minutes, hours, days; losing connection with Home Sharing and loosing Airplay; whether the router and Apple TV are in same room or separated by distance; after trying innumerable posted 'fixes'; after exchanging for a new Apple TV.
    Readers, please don't post a fix until you check it works for atleast a week.

  • Printer sharing across internet sharing

    I hope I don't confuse everyone with this.
    I have three computers—an iMac running Snow Leopard, an iMac running Lion, and a Mini running Leopard. The SL iMac has a printer plugged into it. The other two computers are across the house from it.
    Those two computers are next to each other. The Lion iMac is connected to the Internet via WiFi. The Mini, which does not have wireless, is connected to the Internet via Internet Sharing over an ethernet cable to the Lion iMac.
    Now here's the problem. I can print from the Lion iMac through printer sharing across to the SL iMac. However, I can't figure out how to print from the Mini. It won't find the SL iMac's printer. Enabling printer sharing on the Lion iMac lets the Mini see it as a 'printer,' but it won't print across to the SL iMac.
    So with this setup, is it possible to print to the SL iMac from the wireless-less Mini?
    Just to ward off possible non-workable solutions, rearranging the computers is not feasable right now. It is also not possible to connect the Mini directly to the internet via ethernet. My cable modem is actually in a near-inaccessable part of the house due to that being where the only cable plug is. I have a Time Capsule attached to it, which broadcasts my wireless signal that the WiFi computers can pick up. And no, I can't connect the printer to the Time Capsule—believe me, I tried. I don't want to have to start buying long cables and drilling holes if there's a simpler solution.
    Thanks in advance.

    If I switch to the discussed set up (Airport Extreme N router), will adding an AX in between at 15 feet help bridge the link between the G5's Airport extreme card and the living room's AX?
    Yes. But I still think you should verify if Wi-Fi interference is the cause of your poor signal only 30' away from the AX before going out and purchase anything. Remember, you will tradeoff bandwidth performance for signal strength. With audio, this can be a negative factor.
    If you can get a hold of a laptop, I suggest downloading a copy of iStumbler. Use iStumbler's Inspector feature (select Edit > Inspector from iStumbler's menu) to determine the Signal-to-Noise Ratio (SNR) at different points around your house, by performing a simple RF site survey. Within the Inspector, note the values for "signal" & "noise" at these locations. Start with the laptop near the AX, note the readings, and then, choose the locations between the AX and, finally, where you have the G5.
    SNR is the signal level (in dBm) minus the noise level (in dBm). For example, a signal level of -53dBm measured near an access point and typical noise level of -90dBm yields a SNR of 37dB, a healthy value for wireless LANs.
    The SNR, as measured from the laptop, decreases as the range to the base station increases because of applicable free space loss. Also an increase in RF interference from microwave ovens and cordless phones, which increases the noise level, also decreases SNR.
    SNR Guideline
    o 40dB+ SNR = Excellent signal
    o 25dB to 40dB SNR = Very good signal
    o 15dB to 25dB SNR = Low signal
    o 10dB to 15dB SNR = Very low signal
    o 5dB to 10dB SNR = No signal
    If the SNR is 20dB+ at each of these locations, then you should be getting reasonable performance from your AirPort. If less, either try to locate the source of the Wi-Fi interference or try relocating the base station or the G5 until they are within a 20dB SNR range.

  • Will the Application Scope be shared across the cluster in a multi-node OC4

    Hi,
    I have the following requirement:
    Users of the application can only have single (browser) session. When a user who already has a session connects again, he should no longer be allowed to access the older session.
    My proposed implementation is:
    -     After successful login – possibly using a Session Listener - an entry is made in a HashMap UserSessions that lives in the application scope. Key is the username, value is the session id (HttpSession.getId()).
    -     For every request, using a ServletFilter, we check whether the session is still in the UserSessions HashMap for the current user. If a new session has been created for the same user, the session id for that new session is in the UserSessions map and the servletfilter will not find the session. In that case, the filter should invalidate the session and forward to the user to an error page.
    However, the application will run on a multi-node OC4J cluster. I am starting to wonder:
    Will the Application Scope be shared across the cluster in a multi-node OC4J environment?
    I know session state can be shared. But what application state/scope?
    Does anyone know? Do I have to do anything special in the cluster or the application to get this to work?
    Thanks for your help.
    Lucas

    gday Lucas --
    Application scope is not replicated across JVM boundaries with OC4J.
    I'm sure this used to be described in the doc, but I can't find it now from a quick scan.
    If you wanted to use this type of pattern, you could look to use a Coherence cache as distribution mechanism to share objects across multiple JVMs/nodes.
    -steve-

  • After factory reset information shared across devices won't load

    Hello. I recently did a factory reset on my MacBook Air. I backed up my iphoto library and itunes library to external hard drive and was able to load those fine. But I am still having a problem with syncing media and data across devices. Maybe I'm missing something? I set up my icloud; the contacts, address book, etc. seemed to have loaded all the data. BUT: the information that is supposed to load through sharing across my ipad, iphone 5 is not loading. I thought the itunes would load my music just based on the sharing, but it is a good thing I backed it up. Things like ibooks, and the most recent photos I have taken on my iphone are not loaded.
    Please help: I need to know how get all my devices sharing again, and/or pushing media through itunes
    Any tips would be welcome. Thanks.

    Information that is 'shared' via icloud includes calendar events, contacts, todo items, notes, and safari bookmarks. Music that is on an iOS device isn't shared. If it is music you purchased from the Apple iTunes store you can redownload it or it can be moved from the device by using the Transfer Purchases option of the iTunes File menu when your phone is connected to the computer via the cable. iOS apps can also be transferred to the computer this way. New pictures will sync when the phone/iPad is physically connected but I'm not certain how old pictures that exist on the iOS device but not on the computer are handled. You may need to use a third party program to transfer these old pictures - as well as music not purchased from the iTunes store.

  • The guides all say when using the iCloud photos are shared across all devices. Why can't I see my photos from my iPhone on my iPad when it settings on both devices the iCloud for photos is on?

    The guides all say when using the iCloud photos are shared across all devices. Why can't I see my photos from my iPhone on my iPad when it settings on both devices the iCloud for photos is on?

    When you enable Photo Stream on your devices, only new photos you take or import to those devices will be automatically added to your Photo Stream. Existing photos won't.

  • Use 2nd gen apple tv and remote control app on iphones and ipad.  We can control some functions on the apple tv but unable to purchase, access such controls as reset, restart, turn off home sharing, etc.  Home sharing stuck on old apple ID. Please help.

    Use 2nd gen apple tv and remote control app on iphones and ipad.  We can control some functions on the apple tv but unable to purchase, access such controls as reset, restart, turn off home sharing, etc.  Home sharing stuck on old apple ID. Please help.

    That is why I said to restore via iTunes, did you check the link?
    This will put it back to factory settings and you can set it up with the new ID once you reconnect with your HDTV. This is not done via ethernet, as per the link you need to connect to the computer via micro usb. You cannot bypass home sharing.
    FYI: An Apple ID cannot be deleted so the old one would still exist (even if you no longer use the email account it is associated with).

  • How do I configure my contacts to be shared across multiple emails?

    How do I configure my iPhone6 contacts to be shared across multiple emails accounts?

    By interface I simply mean connected to the contacts.  I have two different gmail accounts, one that uses the apple mail app and the new one that launches from the gmail icon that I downloaded from the app store.  The new one doesn't recognize the contacts.

  • Will my new Ipod synch with a shared library on home sharing?

    Will my new Ipod synch with a shared library on home sharing?

    You would need to drag the shared library into that computers library so that you now have it to sync over to the idevice.

  • Cluster installation failed:OCR files are not shared across all nodes

    Hi gurus,
    I'm trying to install RAC 10g using vmware following hunter document to install oracle 10g Rac.
    I'm using centos 4.6 ,I'm now stuck on installing cluster which shows error OCR file are not shared across all nodes.
    Please advice

    Review the Release notes, there is a bug and a fix since CRS fails on the last node.
    This bug is for EL 5, but pretty match what I've found on the log files
    I'm also in EL 4.6, x64 in my case.. haven't tried the fix due lack of time.
    Provide log files from CRS_HOME/logs

Maybe you are looking for