Sharing an Attached USB drive on Network

I have an intel Mac Mini on a network. I would like other machines in the same subnet to see the Mini Pal USB drive I have attached to it. All I have managed to access from the other PCs is the main drive via the home folder.
This is trivially easy to do this on my XP machine. Am I just dense or is it not possible on the Mac?
Thanks for any guidance you can lend.
- Dave -

I hate mysteries, so sooner or later I'd like to find out how to set those attributes "manually".
Sharepoints is a GUI and you can see how it manipulates the netinfo database when adding new sharepoints.
You can also see what it writes to the windows sharing config file /etc/smb.conf
This will give you an understanding of how to this manually. However it is by far easier just to use sharepoints. Or if you invest in professional server software you can use the workgroup manager.
BTW could you mark this thread as solved as it helps other users who search the forum find specific answers. Thanks.

Similar Messages

Attaching USB drive causes EX4 to become unresponsive.

Hello, I have tried to setup a usb to nas backup a few times and keep having the same problem. Upon attaching the 4TB usb drive (usb 3.0) to the back of the EX4 the NAS becomes unresponsive. I can no longer access it from the dashboard or the my cloud app on a mobile device. The app says it is offline. The ex4 is on but no drives are spinning. The usb drive is spinning however.
Once, I was able to see the EX4 and the attached USB drive in my file explorer. It showed the USB drive as a share. It said something like "Share 2_1." However the internal folders were not visible. Then the EX4 froze and went unresponsive - which caused me to try and manually shut it down. It did not power down and after making sure no data was being transferred I had to pull the power (as recommended on this forum).
Once I was able to get as far as setup up a USB to NAS backup on the dashboard. I set up the source and destination folders, etc. upon saving the job the EX4 is inaccessible, while the USB drive spins.
What's going on? Is it taking a long time to index the attached drive? Is it not compatible with the USB drive (seagate 4tb external NTFS USB 3.0)?
Any insight or advice would be great. Thanks!

By default the EX4 will scan the attached USB share for media. This process takes all the CPU of the EX4 for long periods of time, and can also lead tot he creation of numerous metadata directories in your attached drive. You should turn this off. In addition, if you use the USB drive for backups, the DEFAULT option for the EX4 is to commence backups when the drive is connected. This setting can be turned off in the GUI setup for the backup jobs. In addiiton, in my experience, NTFS drives take more overhead than EXT formatted drives.

Can't see shared Airport USB Drive on Network

I have a AirPort Extreme (5th Generation) with a USB drive attached. I am using OS 10.9.2 on my desktop and laptop. I can see the drive on my desktop Mac which has a ethernet connection to the Airport, but my laptop can't see the shared drive. I used Airport Utility (under "Disk" Tab) to Enable file sharing and share disks over WAN. I have set the "Secure Shared Disks" to "With a disk Password." On the laptop, I have set Finder preferences to see "External disks."
However, the disk does not show up on the Finder sidebar under "Devices" or "Shared."
Any suggestions on how I can make this "Shared Drive" visible?
Thanks,
Dave

Also make sure that Finder Preferences is set to show Connected Servers on the desktop.
Restart the entire network as well by powering everything off, waiting a minute, then starting the modem first, followed by the next device connected to the modem, etc until everything is powered back up.

How can I do backups on internal disc while sharing an external USB drive?

Hi,
On my Airport Utility there are two lines: "Time Capsule Disc", and below (indented) "Data".
(When I plug an external USB drive I can see it in this window as well)
Clicking (selecting) the first line, on the right hand side I can see the disc details (name, capacity and SMART Status (Verified)), and two buttons: Compress and Erase (I don't know if these are the words used on the english version mine is spanish).
Clicking on the second line (Data) I can see the Name "Data", capacity, used and available sizes and number of users connected.
First question:
Why Time Machine can't see the "Data" volume if I untick the "Share files" checkbox?
Second question:
Moreover, I've got a USB External Drive attached to my Time Capsule, so I have to have the "Share Files" checkbox ON, this makes my USB disc (fat32) available to my Windows computers but ALSO the "Data" volume can be seen from Windows. If there is any attempt to assign a Windows drive letter to the "Data" volume, next time Time machine wants to do a backup I'm getting a "disc wrong or missing, check credentials (or something similar)".
In summary, what I'm trying to do is Time Machine backups to the internal Time Capsule disc (making that disc unavailable/invisible to any other computer in my network) while sharing a USB external drive attached to Time Capsule.
Advice, please!

Yes you can go to > Music > iTunes folder and copy the whole iTunes folder and drag the folder to your external and then on the new Mac click and highlight the iTunes folder and then in iTunes click on the button at the top (add folder to library) and you should see all your songs transfer from the external to the Mac and all songs start filling up in your iTunes library on the Mac.
This is the easiest method all songs and other media such as songs, movies, apps will be transferred over however you may not be able to keep ratings & last played counts using this method.
To keep all metadata including ratings & play count use the Apple method exclusively for this if you have to have your metadata, play counts and ratings saved.
I used scenario one above because it one of the simplest methods and I was just satisfied enough just to transfer all media over.

Will Time Machine backup Time Capsule files to an attached usb drive?

Hi Everyone,
I want to put shared media files on my Time Capsule and then have Time Machine backup my imac and all the files on the TC to a usb drive attached to the Capsule. Possible? That way I have a shared media server that is being backup up regularly.
Thanks for the help!

No. Time Machine cannot backup any network attached storage device such as TC. TM can only backup a Mac's internal HDD plus and ATTACHED/LOCAL HDD to the external HDD connect to the TC USB port.

Can't access the Time Capsule Drive and attached USB drive

I bought the 3 TB Time capsule a couple of months ago. I am using it as my wireless router for a cable modem and have attached a USB drive (seagate) to the TC. I use the TC drive for time machine only. It worked well at first, for about the first month. Now I have trouble accessing the TC drive as well as the USB drive. The router function works perfectly fine. The drives show up in the Finder under Shared but cannot connect. Time machine does not back up because it says the back up drive is not available. In disc utility, the base station shows with the correct name, but I can't access it. It asks for a pasword but does not respond, so I cannot reboot it from my computer.
If I restart the TC (power off and on), it works fine, I can access both drives. However, this problem recurs, sometimes within a few days. I have also noticed, which may be related, that when I enter time machine (when everything is working fine), some of the back-ups are blank. There is a date and time but no actual back-up. Not sure if this is related.
I'm runing Mavericks 10.9.2 on an older MacBook, 15" late 2008 with 2.4 ghz dual core.

Hi Bob,
I updated Mavericks but still had the same problem, so I did a hard reset on TC, although I held the button for over 5 seconds and the amber light was flashing rapidly, it acted like a soft reset. Still no change so I rebooted my laptop. Still had an excellent internet connection but in AirPort utility, the TC is grayed out and says device not found. Light on TC was amber. So, I tried a hard reset again, but the light wouldn't flash at all. Unplugged it and after pluggin back in, acted like a hard reset. I restored previous settings and it is fine for the moment. Will keep you posted if it recurs. Hopefully it will not with updated Mavericks, but I get the feeling the problem may be the TC.

AEBS Erratic behavior when connecting to attached USB Drives in XP

I have the old 10 100 version of the AEBS. I have always had problems with connecting to the attached USB (3) drives on a powered USB adapter. I have spent hours on the phone with Apple Support and eventually Apple released new firmware for the AEBS. This seemed to correct the connection problem for my iMac under Leopard. The AEBS does show in the Finder and I can connect to it with no problems. When I use my XP pc, the story is entirely different.
There seems to be several problems and maybe someone can help me with this.
Every time I shut down the XP machine, I have to remap the drives to letters X. Y, and Z. At times I am simply asked for the password to the AEBS to connect. At other times I have to disconnect the mapped drives (they no longer work but still show in explorer) then remap them again. This will work some times but most of the time I will get a message saying the network connection is unplugged (this is the AEBS restarting as I no longer have access on my iMac) and the mapping process will fail. This should be a simple process and I should be able to access the 3 drives either by mapping them or going through the network connections in Explorer.
Does anyone know why this process of mapping drives on the XP machine would keep restarting the AEBS? Is there any way to permanently keep the connection to the AEBS 3 hard drives when I reboot the XP machine?

I would also like to do this, but in the meantime, here is my question for you: How did you connect multiple hard drives to the AEBS? Did you just use a USB hub, or did you successfully link the two drives? I have one enclosure that has a USB, and that one is connected and working with the AEBS, but i would like to connect another one also, but it only has FW ports. I tried to link the two together with FW, but the FW HDD isn't showing up. I would be willing to get a new enclosure for that drive, if I was sure it wold work through a hub...

Problem attaching USB drive to my TC

Hello all, I have tried searching all over the place and I can't seem to find anything that is helping me.
I have a 2TB USB drive that I recently attached to my MBP, formatted it Mac OS Extended (Journaled) and then proceeded to copy about 1TB of data to it. All is working great when it is attached to directly to my laptop but when I connect it to the USB port on my TC to try and use it as an additional network file system the TC flashes orange and tells me the "Disk needs repair". I put it back on my MBP and it still works fine.
Am I missing something here? I should be able to do this right?
Any help you could offer would be greatly appreciated.

thxceej, welcome to the discussion area!
Suggest that you connect the drive directly to your MBP, then open
Applications > Utilities > Disk Utility.
Click to select your drive on the left and then click Repair Disk at the lower right of the window and let the process run. It may take 30-60 minutes depending on how much data you have on the disk.
When the disk has been repaired, power down the complete network...all devices. Connect the drive back to the USB port on the Time Capsule. Then start the modem first, then your router,then devices one at a time until everything is powered back up.
See if that helps.

Attach usb drive to time capsule

I have been attempting to SEE the HD attached to the USB port on the TC. It DID work previously until I had to factory reset the TC. Now, it doesn't show. Any suggestions?
I've been to the Disks tab and the File Sharing box is checked.
Stumped.

Plug the usb drive into the mac.. can you read it??
Plug it back into the TC.. if it disaapears it can be due to USB drawing too much power.. TC is severely underpowered.. and even a powered disk can have issues.
It can be firmware update that happened. If the TC is now on 7.6.3, go back to 7.6.1 or even better 7.5.2
It can be format of the drive.. if it won't show in the airport utility it won't show in the computer.
Retry with a USB hub.. make sure the disk is formatted HFS+ and partitioned using GUID type.

Can I attach USB drive to Airport Express USB port

I would like to attach a USB drive to my Apple airport Express USB port so that I can back up my data on my MBP and have my music stored on it for playing back over Apple TV.
Is there any issues to doing this? As an example, how would I see the drive?
thanks in advance.
Adam

Well, you can certainly attach a USB drive to the port on the AirPort Express.....but nothing will happen if you do this....since the USB port on the Express will only support a compatible printer and Keyspan remote control.
You will need an AirPort Extreme if you want to attach a shared hard drive to the USB port.

Best Practice Attaching USB drive to VM

Since USB passthru is no longer supported in OVM, what is the best practice and or recommendation for loading large amounts of data to a VM from an external USB drive?

thxceej, welcome to the discussion area!
Suggest that you connect the drive directly to your MBP, then open
Applications > Utilities > Disk Utility.
Click to select your drive on the left and then click Repair Disk at the lower right of the window and let the process run. It may take 30-60 minutes depending on how much data you have on the disk.
When the disk has been repaired, power down the complete network...all devices. Connect the drive back to the USB port on the Time Capsule. Then start the modem first, then your router,then devices one at a time until everything is powered back up.
See if that helps.

Attaching USB Drive - Can't read AP configuration file, kills internet

Current network:
Airport Extreme (Sim Dual-Band)
Mac Pro (wired Ethernet)
MacBook Pro (wired or WiFi N)
MacBook (WiFi N)
2 x iPhones (WiFi G)
Airport Extreme in use for several months with no problems. All Macs can read/write it's configuration.
I hooked up a 1TB My Book USB HD to the Airport Extreme via USB. All three Macs (Mac Pro, MacBook Pro, MacBook) could see and read/write to the new drive. The Airport Extreme appeared in Airport Utility on all three Macs. Wired, WiFi N + G internet continued to work great... however none of the Macs could read the configuration file of the Airport Extreme. If I unplugged the USB drive all the Macs could read and write to the configuration file.
I plugged the USB drive back in and left it overnight. This morning, everything continued to work, with the exception that none of the computers could read the configuration of the AP.
Around 10am today the Macs/iPhones could no longer connect to the internet. I disconnected the USB drive and now the internet works again.

Hey David,
I know you said you read a lot of posts already and none of the other solutions worked, but just in case, if you haven't already I would run through the steps in here:
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

How to set an attached USB drive to automatic sleep using Airdisk?

Greetings all!
I am looking for a way to set my two USB drives to sleep when they are not being used. I only use them a few minutes a day, and don't want to run them down or use the electricity to keep them spinning.
It seems there has been some discussion about this but I haven't been able parse all the conversations. Some people seem to have gotten it to work, while others are relying on a drives "internal" mechanisms. It would be great if someone (perhaps at Apple?) could chime in with an overview of the problem.
Perhaps it is linked to the method of authentication - ie., (using Airport Utility 5.1), whether the Disks > File Sharing > "Secure Shared Disks" > is with "disk password" or another method?
Some have suggested a radio button for a future firmware/other update such as:
"Set drives to sleep when not in use" (Let's hope for this!), but I am hoping for a simple solution in the near future.
Any thoughts out there?
best to all.
*NB: I first posted this on Posted: Apr 4, 2007 12:23 AM and got NO response at all - hopefully I'll have more luck this time !

Hello Andy,
Thanks for your reply.
1. For using Microsoft Outlook rules, we need to keep the computer on, even after work or the colleague is on leave. That is not allowed in my company.
2. For sending an auto-reply email based on subject, that is impossible because the emails from customers are different and we don't have a basic standard.
3. Could you please elaborate how to set a transport rule in Exchange server to achieve the goal?
Thanks a lot in advance.
Steven
1. Only client rules require that the Outlook client remain open. An auto-reply rule should be server-side, so no need to leave Outlook open.
2. Yep!
3. Walk through the hub transport rules and you see one that replies with a rejection code. Thats the best you can get with a hub transport rule and not something I would recommend in your scenario. You could also search around for 3rd party solutions.
Twitter!:

Windows 8 to windows 7. USB driver and network driver -

i changed to windows 7 and now i dont have the network and the usb driver.
i have pavilion touchsmart 14-b115ej sleekbook.
tnk

Hi:
Below is the link to the usb 3 driver you need...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&sp...
If you need the ethernet controller driver (wired), below is the link to the driver you need for that...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&sp...
In order for me to provide the link to the wireless card driver you need, please do the following...
Go to the device manager, find the Other Devices category, and click on the Network Controller needing drivers.
Then click on the Details tab at the top of the network controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the second item on the list (Hardware ID's).
Post the top string of characters.

Mounting USB drive over network

Hello,
I'm working through an issue that I don't quite understand, I think. Here's my setup.
iBook G3 running 10.4.7
iMac G4 running 10.4.7
Airport Express (both computers connecting wirelessly)
My Book external USB 250Gb Drive connected to the iMac G4
I'm trying to access the My Book drive with the iBook using the "Connect to Server" selection on the "Go" finder menu. I type in the local IP of the iMac and it asks me how I want to connect. (Guest or Registered)
I choose registered, and use the username and password of the admin account on the iMac. It presents me with the user folder and the hard drive volume as well as any disk images that I might have loaded (a downloaded .dmg, for instance) but the USB drive never shows up in the list of volumes to mount.
I downloaded Share Points and added the drive to the list of shared volumes, then restarted the iMac, but it still does not come up in the list when I try connecting to the iMac from the iBook. I'm not real confident that I have Share Points set up correctly, I haven't spent enough time to wrap my head around exactly what that software is trying to do.
Any ideas as to where I've gone wrong?
Is there a better way to go about doing this?
It's a hassle to switch the drive back and forth to either machine as I want to work on one or the other. All the cords limit mobility on the laptop as well.
I should like to leave the drive connected to the iMac and use the files with either computer.

trying checking or unchecking the "Ignore Ownership
on this volume" box when you "get info" (file menu)
on the firewire drive.
I don't seem to have this option. It sounded promising, nonetheless... The Disk Utility also doesn't mention this.
Does it matter that it's a FAT32 volume? I hadn't thought to include this initially... If it does, and it's not possible, then I can give up, as I don't have another drive to back up to and reformat the one I'd like to use. Perhaps this will result in finally getting a dreamy LaCie drive... =)

Sharing an Attached USB drive on Network

Similar Messages

Maybe you are looking for