Sharing apple TV wireless conection

I have a new Humax Foxsat HDR which can be connected to the internet via Ethernet - is it possible to connect it to my ATV (which is sitting on top) via its ethernet port and share its wireless internet connection?
Otherwise I will have to buy another airport express which seems silly as the ATV already has an internet connection.
Many thanks for any help

davemo73 wrote:
is it possible to connect it to my ATV (which is sitting on top) via its ethernet port and share its wireless internet connection?
no it is not possible

Similar Messages

How do I extend a wireless conection? for apple

How do I extend a wireless conection? In Apple.

Depends on what brand of router you have. If you have an Airport Extreme Base Station or Time Capsule, then you can use an Airport Express to extend the network wirelessly for use by a device using Ethernet, e.g., a computer or network printer. The latest Airport Express has two Ethernet ports available.
Alternatively, you can run an Ethernet line from the router to the Airport Express and create a new network that is distant from the router. This would work on an AEBS, Time Capsule, or a non-Apple router.

I have dsl internet service with a download speed of .66 mbps. I would like to watch netflix with a wireless conection to apple tv. What is the required internet speed?

I have a dsl internet conection with a download speed of .66 mbps. I would like to watch netflix with a wireless conection to apple tv. What is the required internet speed?

Welcome to the Apple Community.
Netflix recommend a minimum connection speed of 0.5 Mbps, however at that speed many of the other features of the Apple TV will be painfully slow.

Just hooked up new apple tv for first time. able to connect to internet (netflix, youtube) but not able to connect to my itunes account via home sharing. apple tv tells me to make sure computer's itunes has home-sharing enabled, which it does. any advice?

Just hooked up new apple tv for first time. able to connect to internet (netflix, youtube) but not able to connect to my itunes account via home sharing. apple tv tells me to make sure computer's itunes has home-sharing enabled, which it does. any advice?

Have done both suggestions, still not working. Could it have somehting to do with my local network? I am using a wireless Internet provided by my apartment building so not sure if apple tv and my computer are not technically on the same "local network?"
apple tv and main computer are connecting to Internet fine. Just cannot see my itunes on apple tv.
any other advice? My itunes is turned on to home sharing. i entered the same apple itunes account into aple tv. but appletv keeps saying my computer's home sharing is not turned on...but it is.

Switching from shared Apple ID to separate Apple IDs with Family Sharing?

My family (me, wife and 2 kids) all share the same Apple ID. We share it for everything (App Store, iCloud, etc.). We did this because I didn't want to purchase the same music or apps multiple times. This has worked well for several years. But with iOS 8, we can use Family Sharing, but not if we share an Apple ID (at least not when using a shared Apple ID on iCloud). So my question is, how do we switch from a shared account to separate accounts using Family Sharing, while not losing access to any apps or music? I've seen many previous posts (pre-iOS 8) state that I can create new Apple IDs for my wife and 2 kids, then just use them for iCloud and leave the App Store associated with our existing shared Apple ID, but then when they go to update apps, they'll need to enter my password (which my kids do not know, since they don't currently need the password to updates apps with the shared Apple ID. When they want to purchase a new app, be it free or paid, they have to come to my wife or me to enter the password.)
What I'm think is this. Let me know if this would work:
1) Create new Apple IDs for my wife and kids.
2) Before changing anything on their iPhones, go into my phone (which will remain on our existing Apple ID) and turn on Family Sharing and add them to my family so we can share purchases.
3) Once Family Sharing is enabled, change their iCloud login to their new Apple ID accounts. That enables Family Sharing on their devices and they'll be part of my family.
None of the above steps solves for the "you must enter Dad's Apple ID password to update your apps" problem. So my question is, should I also change their App Store account to their new Apple IDs as well? If you say that won't help (because apps will always be associated with the Apple ID they're originally purchased with), then I don't understand how Family Sharing works when you buy apps. In other words, will Family Sharing enable us to share apps that we already downloaded, or just new apps?
Thanks for any help you can provide.
Jason

You should be able to have purchases from more than one Apple ID on one device (up to five I think). When you create the new Apple ID and just leave the apps already on the ipad alone, you shouldn't have any problems.

How can I create a wireless conection?

My Sattellite pro A10 is supposed to come wireless enabled.
Up till now I haven't used it, but am trying to connect to wireless internet.
Windows help and user manuals point me to network conections and to click on wireless connections and search for available connections, but there is and has never been a wireless connection icon in my network connections (running windows XP service pack 2 btw)
Can anyone suggest why and how I can create a wireless conection. The enabling switch on the front is on.

Hello
This unit is not known to me but I have found information that WLAN is optional. Please check if there is WLAN card. You can check it in device manager under Network adapters.
If there is no WLAN card you must buy one.

Shared Apple ID has become a problem and I can't figure out how to be unshared.

Originally, there was iTunes and the iPod. We had one computer with the music on it, and the iPods were all connecting to that single iTunes account, all with a single Apple ID. Then came the iPhone, which needed an iTunes account to set up, update, etc. So of course, we just continued to use the same iTunes account and Apple ID.
Jump ahead a few years to the present, 5 iPhones (5 users), 3 iPads, a couple iPods, 3 mac book pros, and Apple TV and a mac, and they are all still using the same Apple ID. It was fine, even ideal, as I could control the content on the kids iDevices and we could all share apps. Now, with iCloud, FaceTime, and Messaging, it is becoming very apparent that we all should have our own Apple ID. Fine. So....
How does one set up a new Apple ID and not loose all that has happened? Meaning progress in games, access to music, etc.? It feels like that as Apple has improved upon its offering, all great, it has not thought out how it effects a family. While it would be a good shot in the arm of the economy to make 4 of the 5 family members buy everything again, that should not be the only practical option.
Is there another?

I had the same issue, and good news is, it can be easily solved by creating an iCloud account.
First, sign out of your Apple ID on the device you choose. Create a new Apple ID but this time choose the "@iCloud.com" option. Create an account for each device.
Step 2, for the App Store, use the shared Apple ID. But for iCloud, sign in with each individual iCloud account. This way, you'll be able to back-up each device alone while still have one unified ID for your App Store purchases.
To sign in using your new individual iCloud account, go to each device's settings and sign in to iCloud from the iCloud tab in settings.
Hope this helps, feel free to ask if you're still unsure! This way you can use your iCloud ID for GameCenter, backup, etc while maintaining a shared Apple ID for purchases.

Apple Bluetooth Wireless Keyboard not Connecting to iPad

Hey, I try to connect my Apple Bluetooth Wireless Keyboard is not connecting to my iPad. I tap Bluetooth "On" and it searches for devices. Then I slide the switch on the back of my keyboard to the green light and the iPad picks it up and says "Not Paired." So I tap the keyboard and it just spins and spins and spins until the keyboard times out and powers off. Then it disappears and my iPad can't find any devices. I repeated the process several times and I got the same result.
Any help would be appreciated!
Thanks

I had a very similar problem, with a new model wireless keyboard. The set-up is not very intuitive (and the instructions for both the iPad and the keyboard are not particularly helpful). Here's how I got it to work:
1. If the keyboard has already been paired with another object -- e.g., I was testing out my iMac keyboard -- you should be completely out of range of that other object (more than 30 feet away).
2. Make sure Bluetooth on the iPad is disabled.
3. The keyboard should not be "on" -- i.e., no solid green light.
4. Press and hold the power button on the keyboard until you get a blinking green light. This should take just a few seconds.
5. Turn on Bluetooth on the iPad.
6. At this point, it should detect the keyboard and instruct you to enter a combination of keys to pair the two devices.
I found that you have to follow this sequence or it won't work. For example, if you have Bluetooth on on the iPad before holding the power button on the keyboard, it won't work.
I hope that helps.

Apple Aluminium Wireless Keyboard - How to put back UP arrow key

Apple Aluminium Wireless Keyboard - How to put back UP arrow key
Does anyone know how to put back the UP ARROW key that has fallen off?
The parts are in good condition. It must have caught something and it fell off.
Thanks.

http://www.ifixit.com/Answers/View/25695/Howto+get+the+down+arrow+key+intoplace

Is there ANY wireless mouse that will work with the iPad 2 and Apple's Wireless Keyboard?

I have the iPad 2 and Apple's Wireless Keyboard and would like to purchase a wireless mouse that will accommodate my Apple products. I do understand that Apple's Magic Mouse is not compatible with the iPad 2, but would like to hear if there is any possibility that i could use a wireless mouse with my iPad.
Thanks :)

You don't have to purchase a mouse. You already have one, it's wireless and the only one that will work on an iPad.
 Cheers, Tom

"Sticky" keys on apple's wireless keyboard when typing on my ipad.

I am using apple's wireless keyboard on my ipad. It has worked fine for four months but then last night the keys got "sticky", typing any letter I'm hitting continually until I hit escape. Does anyone know how to set it back to normal typing?
The on screen keyboard works fine (I'm using it now), but when i switch to the wireless this happens:
I cannnnn't't't tttttyppeeeeeeee noormallyyyyyyy...............
I tried changing batteries but that didn't help either. Would really appreciate comments/help!!

Do you have a computer with Bluetooth that you can test the keyboard with?
Have you tried going into Settings on the iPad and under Bluetooth tried forgetting the device? You should see the keyboard listed as a device. Pressing the arrow in the blue circle should present an option to forget the device.

Using "delete" key on Apple's wireless keyboard shut down applications on my ipad, such as Mail, in Japanese Font. Any solution?

I use Apple's wireless keyboard to type email messages on my ipad. Often applications, such as Mail, would shut down suddenly after using "delete" key on the wireless keyboard. This happens when I am typing in Japanese language. It is really annoying because I will lose all the text that are not saved. Any suggestions?

Sorry but that was a completely pointless post.

How do I jump between spreads using apple's wireless keyboard?

When in InDesign CS4 for Mac, I often jump to the next spread. First, I center the spread on my screen using Command+Option+0. Then, I use Option+Page up or Page down, and this takes me to the next or previous spread, and it keeps the spread exactly centered. I am going to switch to apple's wireless keyboard, which does not have a page up or page down. Will I still be able to navigate the same way using the arrow keys or another keyboard combination?

You don't have to edit keyboard shortcuts.
Press Fn + Option + up arrow and Fn + Option + down arrow to page to next or previous spread. "Fn" is the function key at the lower left corner of your keyboard.
I also turn on the function "Use F1, F2, etc. keys as standard function keys in System Preferences > Keyboard > Keyboard. This allows you to get access to function keys when necessary.

Connect ipad to Apple TV wireless

How does one connect iPad to Apple TV wirelessly.

Apply TV
http://support.apple.com/kb/HT4437
http://support.apple.com/kb/HT5209
http://support.apple.com/kb/HT4352

EBS 12.1.3 & clone from non-shared to shared appl tier: adcfgclone.pl error

Hi,
we have Oracle EBS 12.1.3 with 11gR2 in IBM AIX7.1. We are now cloning it from a non-shared appl tier to a shared appl tier. Shared appl tier is located in the network drive which uses NetApp.
I've been following these documents:
- Cloning Oracle Applications Release 12 with Rapid Clone (Doc ID 406982.1)
- Sharing The Application Tier File System in Oracle E-Business Suite Release 12 [ID 384248.1]
- Using Load-Balancers with Oracle E-Business Suite Release 12 (Doc ID 380489.1)
DB clone went without problems, but now I'm getting strange problems when trying to run adcfgclone.pl for apps tier:
"applmgr@myhost:/d01/shared_mount/apps/apps_st/viscomn/clone/bin # perl adcfgclone.pl appsTier
pwd: No such file or directory
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications Rapid Clone
Version 12.0.0
adcfgclone Version 120.31.12010000.8
ERROR: could not find source system context in /../context/db/CTXORIG.xml
Can't open /../context/db/CTXORIG.xml:
No such file or directory
This file exists:
/d01/shared_mount/apps/apps_st/viscomn/clone/context/apps/CTXORIG.xml
I've tried to re-execute the cloning steps for app tier, but the problem persists.
I've cloned from non-shared to non-shared app tier without problems, so I have a feeling that this might be related to the shared network drive.
Any ideas how to solve this problem?
BR,
TH

Hi Hussein,
thanks for the reply.
+The path is different (first path is db while the second one is apps), so copy the file from the source instance to $COMMON_TOP/clone/context/apps directory on the target instance and try then -- Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1]+
What I meant to say that CTXORIG.xml already exists in the correct directory in the target system:
$COMMON_TOP/clone/context/apps
Anyways, I recopied the file from source to the target system $COMMON_TOP/clone/context/apps, but still the same problem. I'll continue reading "Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1]".
I noticed below when running "perl adcfgclone.pl appsTier" with perl debug mode:
Cwd::_backtick_pwd(<10.1.3 ORACLE_HOME>/perl/lib/5.8.3/aix-thread-multi/Cwd.pm:204):
204: local @ENV{qw(PATH IFS CDPATH ENV BASH_ENV)};
DB<1> s
Cwd::_backtick_pwd(<10.1.3 ORACLE_HOME>/perl/lib/5.8.3/aix-thread-multi/Cwd.pm:205):
205: my $cwd = `$pwd_cmd`;
DB<1> s
pwd: No such file or directory
Cwd::_backtick_pwd(<10.1.3 ORACLE_HOME>/perl/lib/5.8.3/aix-thread-multi/Cwd.pm:207):
207: local $/ = "\n";
DB<1> s
BR,
TH

Sharing apple TV wireless conection

Similar Messages

Maybe you are looking for