Sharing as WMV audio is only noise.

I've used PREL 8 for several months with no problems.  I've done several projects and saved the share settings as Presets.  Everything worked fine.
Now, when I render these same projects again, the audio files come out simply as noise.  The original audio is not heard, just a series of pops.
No updates to Premier Elements have been applied between when it worked and now.  Of course many Microsoft XP automatic updates have been applied.
I can Render the video as MPG or FLV and the audio is fine.  It just appears to be the Windows Media that has started to have a problem all of a sudden.
I've experimented with different audio settings within the Windows Media but nothing seems to help.
I've been searching to see if there has been a WMV codec update or anything that would cause this but I haven't found anything.
Any help would be appreciated.  This is very frustrating.

Bill,
GSpot reports:
Codec: 0x0162 (Windows Media Audio 0 Professional)  VBR
Info: 0x01 96000Hz 440 kb/s tot (2 chnls)
1  Stat: Status Undetermined.
By the way - GSpot crashed when I tried a "Proposed Codec Solutions and Tests" and clicked the 1 under MS A/V.
I didn't document all the different combinations of WMV share settings that I tried.  I know I tried several of the older codecs - including version 8 and version 4 (default is v9).  I tried one and two pass.  I tried a lot of stuff randomly.

Similar Messages

  • Only Noise (high frequence pulses) on Firewire Interface Motu 828mkII

    hello,
    i drive Logic 7.2.3 and Wave Burner 1.2 a long time, since yesterday i get only noises and high frequence pulses on my interface.
    I Tunes and Quick Time works well whith Motu/Firewire.
    Only Logic and Wave Burner does!!
    I tried different settings in Logic or in Audio-Midi-Configuration.
    Additionaly i get sync problem messages in Logic, also in WB.. the SPL is not moving right!!
    Has anybody an idea??
    Thanks
    Patch

    There are lots of posts on this topic - the search function would have turned them up. Try this:
    http://discussions.apple.com/thread.jspa?messageID=1477845&#1477845

  • Problems with OSS (ALC1200, one speaker only noise)

    Hi, im trying to use OSS since a half year, but never got it up running. There is always only noise/scrappy sound on the right front speaker and on the same time on the right Headphone speaker. In OSS test it says ok when testing. Devices are  /dev/oss/oss_hdaudio0/pcm0 when this occures the first time, and /dev/oss/oss_hdaudio0/spdout at the second time.
    Card is the ALC1200 onboard-chip of the Asus P5Q. Its is recognised by alsa & oss as ALC888, and normally working in alsa.
    ossinfo -v3 -a :
    HD Audio play front /dev/oss/oss_hdaudio0/pcm0 (device index 0)
    Legacy device /dev/dsp0
    Caps: DUPLEX TRIGGER MMAP
    Modes: IN/OUT
    Out engine 1: 0/HD Audio play front
    Available for use
    Engine 2: 9/HD Audio play front (vmix)
    Available for use
    Engine 3: 10/HD Audio play front (vmix)
    Available for use
    Engine 4: 11/HD Audio play front (vmix)
    Available for use
    Engine 5: 12/HD Audio play front (vmix)
    Available for use
    Input formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au01
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 8
    Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    HD Audio play rear /dev/oss/oss_hdaudio0/pcm1 (device index 1)
    Legacy device /dev/dsp1
    Caps: TRIGGER MMAP
    Modes: OUTPUT
    Out engine 1: 1/HD Audio play rear
    Available for use
    Input formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au02
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 2
    Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    HD Audio play center/LFE /dev/oss/oss_hdaudio0/pcm2 (device index 2)
    Legacy device /dev/dsp2
    Caps: TRIGGER MMAP
    Modes: OUTPUT
    Out engine 1: 2/HD Audio play center/LFE
    Available for use
    Input formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au03
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 2
    Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    HD Audio play side /dev/oss/oss_hdaudio0/pcm3 (device index 3)
    Legacy device /dev/dsp3
    Caps: TRIGGER MMAP
    Modes: OUTPUT
    Out engine 1: 3/HD Audio play side
    Available for use
    Input formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au04
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 2
    Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    HD Audio play pcm4 /dev/oss/oss_hdaudio0/pcm4 (device index 4)
    Legacy device /dev/dsp4
    Caps: TRIGGER MMAP
    Modes: OUTPUT
    Out engine 1: 4/HD Audio play pcm4
    Available for use
    Input formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au05
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 2
    Native sample rates (min - max): 44100 - 192000 (44100,48000,96000,192000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    HD Audio play spdif-out /dev/oss/oss_hdaudio0/spdout0 (device index 5)
    Legacy device /dev/dsp5
    Caps: TRIGGER MMAP
    Modes: OUTPUT
    Out engine 1: 5/HD Audio play spdif-out
    Available for use
    Input formats (0x00001410):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_AC3 - AC3 (Dolby Digital) encoded audio
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001410):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_AC3 - AC3 (Dolby Digital) encoded audio
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au06
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 2
    Native sample rates (min - max): 44100 - 192000 (44100,48000,88200,96000,192000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    HD Audio play spdifout /dev/oss/oss_hdaudio0/spdout1 (device index 6)
    Legacy device /dev/dsp6
    Caps: TRIGGER MMAP
    Modes: OUTPUT
    Out engine 1: 6/HD Audio play spdifout
    Available for use
    Input formats (0x00001410):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_AC3 - AC3 (Dolby Digital) encoded audio
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001410):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_AC3 - AC3 (Dolby Digital) encoded audio
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au07
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 2
    Native sample rates (min - max): 44100 - 192000 (44100,48000,88200,96000,192000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    HD Audio rec mix /dev/oss/oss_hdaudio0/pcmin0 (device index 7)
    Legacy device /dev/dsp7
    Caps: DUPLEX TRIGGER MMAP
    Modes: IN/OUT
    In engine 1: 7/HD Audio rec mix
    Available for use
    Engine 2: 9/HD Audio play front (vmix)
    Available for use
    Engine 3: 10/HD Audio play front (vmix)
    Available for use
    Engine 4: 11/HD Audio play front (vmix)
    Available for use
    Engine 5: 12/HD Audio play front (vmix)
    Available for use
    Input formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au08
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 2
    Native sample rates (min - max): 44100 - 96000 (44100,48000,96000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    HD Audio rec mix /dev/oss/oss_hdaudio0/pcmin1 (device index 8)
    Legacy device /dev/dsp8
    Caps: TRIGGER MMAP
    Modes: INPUT
    In engine 1: 8/HD Audio rec mix
    Available for use
    Input formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Output formats (0x00001010):
    AFMT_S16_LE - 16 bit signed little endian
    AFMT_S32_LE - 32 bit signed little endian
    Device handle: PCI82fe1043-0000:00:1b.0-au09
    Related mixer dev: 0
    Sample rate source: 0
    Preferred channel configuration: Not indicated
    Supported number of channels (min - max): 2 - 2
    Native sample rates (min - max): 44100 - 96000 (44100,48000,96000)
    HW Type: Not indicated.
    Minimum latency: Not indicated
    /dev/dsp -> /dev/oss/oss_hdaudio0/pcm0
    /dev/dsp_in -> /dev/oss/oss_hdaudio0/pcm0
    /dev/dsp_out -> /dev/oss/oss_hdaudio0/pcm0
    /dev/dsp_ac3 -> /dev/oss/oss_hdaudio0/spdout0
    /dev/dsp_mmap -> /dev/oss/oss_hdaudio0/pcm0
    /dev/dsp_multich -> /dev/oss/oss_hdaudio0/pcm0
    ossmix:
    Selected mixer 0/High Definition Audio ALC888
    Known controls are:
    jack.green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
    jack.green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.green.mute ON|OFF (currently OFF)
    jack.black.mode <front|rear|center/LFE|side|pcm4|input> (currently rear)
    jack.black [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.black.mute ON|OFF (currently OFF)
    jack.orange.mode <front|rear|center/LFE|side|pcm4|input> (currently center/LFE)
    jack.orange [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.orange.mute ON|OFF (currently OFF)
    jack.gray.mode <front|rear|center/LFE|side|pcm4|input> (currently pcm4)
    jack.gray [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.gray.mute ON|OFF (currently ON)
    jack.pink.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
    jack.pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.pink.mute ON|OFF (currently ON)
    jack.fp-pink.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
    jack.fp-pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.fp-pink.mute ON|OFF (currently ON)
    jack.blue.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
    jack.blue [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.blue.mute ON|OFF (currently ON)
    jack.fp-green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
    jack.fp-green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.fp-green.mute ON|OFF (currently OFF)
    record.mix.mute.mic1 ON|OFF (currently ON)
    record.mix.mute.fp-mic1 ON|OFF (currently ON)
    record.mix.mute.linein1 ON|OFF (currently ON)
    record.mix.mute.fp-headphone1 ON|OFF (currently ON)
    record.mix.mute.green1 ON|OFF (currently ON)
    record.mix.mute.black1 ON|OFF (currently ON)
    record.mix.mute.orange1 ON|OFF (currently ON)
    record.mix.mute.gray1 ON|OFF (currently ON)
    record.mix.mute.input-mix1 ON|OFF (currently ON)
    record.mix1 [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    record.mix.mute.mic2 ON|OFF (currently ON)
    record.mix.mute.fp-mic2 ON|OFF (currently ON)
    record.mix.mute.linein2 ON|OFF (currently ON)
    record.mix.mute.fp-headphone2 ON|OFF (currently ON)
    record.mix.mute.green2 ON|OFF (currently ON)
    record.mix.mute.black2 ON|OFF (currently ON)
    record.mix.mute.orange2 ON|OFF (currently ON)
    record.mix.mute.gray2 ON|OFF (currently ON)
    record.mix.mute.input-mix2 ON|OFF (currently ON)
    record.mix2 [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.mic [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.fp-mic [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.linein [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.fp-headphone [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.green [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.black [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.orange [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.gray [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.input-mix <mic|fp-mic|linein> (currently linein)
    misc.front-mute ON|OFF (currently OFF)
    misc.input-mix-mute1 ON|OFF (currently ON)
    misc.front1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    misc.front2 <front|input-mix> (currently front)
    misc.rear-mute ON|OFF (currently OFF)
    misc.input-mix-mute2 ON|OFF (currently ON)
    misc.rear1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    misc.rear2 <rear|input-mix> (currently rear)
    misc.center/lfe-mute ON|OFF (currently OFF)
    misc.input-mix-mute3 ON|OFF (currently ON)
    misc.center/lfe1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    misc.center/lfe2 <center/LFE|input-mix> (currently center/LFE)
    misc.side-mute ON|OFF (currently ON)
    misc.input-mix-mute4 ON|OFF (currently ON)
    misc.side1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    misc.side2 <side|input-mix> (currently side)
    misc.pcm4-mute ON|OFF (currently ON)
    misc.input-mix-mute5 ON|OFF (currently ON)
    misc.pcm41 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    misc.pcm42 <pcm4|input-mix> (currently pcm4)
    vmix0-enable ON|OFF (currently ON)
    vmix0-rate <decimal value> (currently 48000) (Read-only)
    vmix0-channels <Stereo|Multich> (currently Multich)
    vmix0-src <Fast|Low|Medium|High|High+|Production|OFF> (currently Fast)
    vmix0-outvol <monovol> (currently 25.0 dB)
    vmix0-invol <monovol> (currently 25.0 dB)
    vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
    vmix0.pcm10 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
    vmix0.pcm11 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
    vmix0.pcm12 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
    I tried to turn everything off at record. Oh and this sound is only there when i play sound, not when i do nothing. Any ideas?

    I'd like to use OSS instead of alsa - just for curiosity and for the rumored "better quality"
    I followed wiki and got OSS working, except the same problem as stated above. First I get noise from right front speaker (pcm0) and second from spdout_std (the last one osstest testes). The second last one (spdout) gives good sound though, so I could symlink /dev/dsp to /dev/oss/oss_hdaudio0/spdout, but then how to get sound out from the optical SPDIFF output?
    Has anybody solved this yet, or do I have to go back ALSA?

  • Only noise in v.o. tool with MBox

    I recently upgraded to a Mac Pro and I installed Final Cut Studio (Universal) and all the available upgrades. I have an MBox 1 with ProTools LE and Digi CoreAudio Manager 7.1.1 installed.
    In ProTools the MBox works fine.
    Today I tried to use the Voice Over Tool with the MBox in Final Cut Pro. When I switch the input to the MBox the input level shoots up to 0 dB and over, even if i disconnect the mike (input 1) and turn the gain down to zero.
    If I record to the timeline I get only noise up to exactly -6 dB.
    There's no settings in the Digi CoreAudio Manager that have any effect, the audio settings in System Preferences don't seem to matter... So what's wrong? All devices are set to record/play 48 kHz.
    In my previous setup (G4) this configuration never failed....
    Mac Pro 2.66 GHz   Mac OS X (10.4.8)   2 Gb RAM, ATI Radeon X1900 XT, Sony DSR-11, FCP 5.1.1
    Mac Pro 2.66 GHz   Mac OS X (10.4.8)   2 Gb RAM, ATI Radeon X1900 XT, Sony DSR-11, FCP 5.1.1

    You should ground reference all floating signals for this module as stated in the User's Manual.
    Justin
    National Instruments
    Product Support Engineer - Conditioned Measurements

  • Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    What device?
    What format?
    How are you importing it?
    Can you find the external audio with Finder?
    Where is your destination file when you import it?
    Andy

  • A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?

    A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?

    Thanks to the gentlemen, Messrs. Galt & rack0 tack0, for their timely replies. I failed to mention in my original post that there are upwards of 15 Apple appliances in our house-- from Apple TV to 4 Apple iPhones to 4 iPads to 2 MacBook Pros to 2 iMacs to a 2TB Time Capsule-- we're all Apple, all the time. We don't own a PC and that was what was hanging me up. I did confirm, incidentally that we're IP6 (although, honestly, that technical jargon didn't mean a lot to me-- hey, I learned something [sorta]!). Anyway, after much digging, I've finally determined that what was/is being identified as a PC, is in fact a Canon MX860 Printer serving the "old" 21' iMac-- thankfully, our recently acquired Epson XP-410 serving the "new" 27' iMac is identified as such. And despite the time spent, a few valuable things occurred along the way, including a firmware update related to the Time Capsule... learn by doing, I guess. Thanks again.

  • Set sharing on system to read only now computer wlll not boot up

    set sharing on system to read only now computer wlll not boot up

    Hello skiboat2, 
    Because the permissions have been changed, you will need to put them back to what they were before. One of the ways to do that is to reinstall your OS X to make sure that everything permission wise gets put back to what it needs to be to work properly. Based of to the operating system that you say you have, I have provided the steps for reinstalling Snow Leopard. When doing this, it does not overwrite your personal data; it only touches the operating system. 
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.  

  • Copying audio tracks only

    I have a clip that the associated sound needs to be doubled, it's pretty faint... I need to get a higher volume level than what is available on the clip.
    I'd like to try "doubling" that particular clips' audio, but can't seem to figure out a way to bring another copy of the audio.
    When I try using option-drag, it re-arranges everything in the timeline. I've tried locking certain areas down, but no avail.
    I tried bringing in the same clip (audio + video), and then deleting the video and using the audio, but it only brought in the video and not the audio... Any suggestions would be appreciated.
    Thanks,
    Ed

    I have a "Cream Reunion" DVD video that I bought and I want to copy the "audio tracks only" into Itunes then onto the Ipod. I using a windows xp pro laptop with Itunes 7.0 and the older audio only Ipod. Is this possible??
    laptop   Windows XP Pro  
    laptop   Windows XP Pro  

  • Mac Mini Audio out only sending to right speaker

    I am running a Mac Mini OS X 10.6.4 as media center.  I am running video directly to my TV, which works fine.  I am running the audio from the Mac Mini out the headphone output through a Y audio Left / Right cable to a sub woofer. The issue I am having is that the audio is only coming out the right side?
    When I hook up a pair of headphones I get sound out of both sides, but when I switch it back to the Sony Soundbar it is segemented to the one side.
    Any suggestions?

    If the output works fine with a set of headphones and not the Sony soundbar, that suggests the cable feeding the soundbar or the soundbar have issues. Have you reversed the cable channels at the soundbar to verify that the soundbar is working correctly? If the working speaker switched sides, then get a new cable.

  • Stuck in audio capture only

    Sorry, this is urgent, no time to search. Somehow going into capture mode, "audio capture only" got selected. I don't know how to deselect and cannot find anything in Help. How do I get back to capturing Video and audio?
    Using FCE 3.5.1

    Dumping the final cut express plist preferences did not work. What did work was dumping all user prefernces related to FCE.

  • Copying video w/audio and only pasting audio?

    I was asked this earlier today and I had to admit, I had no idea how to do this.
    My colleague would like to copy a clip (video and audio) and only paste the audio. I've hunted through the manual and I didn't see this, so I'm asking here.
    This is something she has to do over and over, and due to the set up where she's recording (don't ask), they record voiceovers to tape (it's a public access channel with low-budget), but she only needs the audio.
    The solution I suggested was to put them all into a sequence and then just option-select all the video tracks and delete them.
    Anyone have any better ideas?
    Thanks!

    Maybe I'm misunderstanding the problem, but;
    In order to copy a clip you first have to select it. So if before selecting the clip she turns off linking and just selects the audio portion of the clip then when she pastes it'll only be the audio that is in the clipboard.
    Isn't that what you're asking?

  • IPhone 4 audio books only showing 3 minutes and then skipping if I fast forward

    I have a number of older audio books and audio files that I have recorded myself using a dictaphone and added to the iTunes library and then set the info for them to be "audio book".
    Since the latest software update, my iPhone 4 (and no it's not jail broken) has a) not updated the iPhone library to include or exclude audio books I add or remove from it via sync (using either playlists or the book option where you can tick the books to sync). Instead I have to search on the phone for them and then I have a number of problems with the actual playback:
    1) some of the audio books only show a track length of 3 mins even though on the computer they show as their true length (over an hour).
    2) on the above audio books and even on the ones that do show the right length, the second I try and fast forward, use the scrubbing bar or rewind them, it skips to the next track!
    This is highly frustrating and I can't find a similar problem on support when searching.
    Any suggestions/ideas much appreciated.

    Really? Has no one else had a problem with audio books not appearing in the library and then skipping to the next track if you try and fast forward or rewind any of it?

  • 2 X-Fi Surround 5.1 connected to one laptop, audio console only supports one?

    M2 X-Fi Surround 5. connected to one laptop, audio console only supports one? Hi,
    for multi room audio purposes I connected two USB X-Fi Surround 5. to a laptop. Windows detects the two sound cards correctly and via Winamp I can have both of them play simultaniously different music, which is great.
    However, I can't seem to be able to make a selection between the two sound cards in Creative's audio console. I can only select one card, and of course, the sound settings only apply to that one card. How can I access the other card for sound settings such as 3D and crystalizer ?
    The sound card selection menu allows me to choose between :
    - Windows Standard audio
    - SB X-Fi surround 5.
    - X-Fi surround 5. Line / Mic in
    - X-Fi surround 5. What U hear
    I tried reinstalling the sound drivers as suggested elsewhere, but that doesn't seem to help.
    Many thanks in advance !
    Kind regards,
    Cooled Spirit.

    QRe: 2 X-Fi Surround 5. connected to one laptop, audio console only supports one?B Thanks, but that doesn't help, as soon as I unplug, the settings are "lost". It's the software that stores the settings, not the hardware.
    My theory so far is, that this caused by?two identical?products : both have exactly the same?device name in Windows. I can imagine that when certain software tries to retrieve a list of available Creative?hardware, it might get confused when two identical names occur in the list, perhaps skipping one of the "duplicates". Windows device name is?provided either by the drivers or the hardware itself.
    Of course, this is just a theory. Windows itself and software like Winamp seem to be able to handle this perfectly.
    If I would have the technical know-how, I would try to rename the device name in Windows registry. Alas, the name appears at many places, I don't know which exact place to change the name, in order to obtain different device names. And that's assuming Creative software uses this...
    Kind regards,
    Cooled.

  • Cannot capture video frm PD170 - now says Audio Capture Only Selected??

    So I now can't capture video?? It says before you attempt to do so that it's Audio Capture Only Selecteed / Video Preview Disabled.
    And I have been thru everything to figure how to unselect this option - and cant find anything??
    Can anyone help?
    Many thanks!!

    Thanks for your replies.
    I have the Device Control and Capture presets set to PAL. Is there any other PAL settings I need to set at this stage?
    The 25fps vs. 24fps was confusing me as well. I was told that was the camera that was used, and set to 24fps, and when I step through the tape frame by frame, it appears that it is 24fps. Does that make any sense? Perhaps this is another thing to complicate the whole situation. I've tried multiple variants of capture presets. PAL, NTSC, 24fps, 29, 25, all giving me the same "Preview disabled."
    Any ideas?
    Thank you!
    Katie

  • I cannot send video (via airplay) to apple tv. sound (audio music) only does works.

    I have had my whole system working perfectly before, so this is a puzzle to me, unless it was some update?
    When I 'send' audio music only to apple tv from PC it plays perfectly. But when I attempt to send video from itunes on pc, I get error message on apple tv. When I 'send' video OR music from iphone nothing works. When I 'send' video from ipad nothing works (did not test music on ipad)  Also, my "remote" software not connecting either anymore to apple tv. From apple tv side, everything works, connected to itunes and my library and everything works fine.
    I have a single home (local) network with Apple TV connected via ethernet cable. not sure if RIP was helping or hindering but it is off. My iTunes is on PC (ver 11.02.26). On my Apple TV, airplay is ON. Homesharing is on. all devices on same homesharing. I have done updates on everything, reset everything, rebooted everything, kicked everything, unplugged and plugged everything back together again.
    but still no joy...

    No, do not have micro usb cable. if it is a big deal, I can get, although have restored back to factory settings which 'appeared' to be successful. Although did not solve issue

Maybe you are looking for

  • Issue with remote printing using adobe reader

    We have a customized forms, with very simple javascript to print document on a remote server (printing to a pdf to tiff converter) //-----------------Do not edit the XML tags-------------------- //<AcroForm> //<ACRO_source>MAIL:Annot1:MouseUp:Action1

  • 9iAS Release 2 (some) components don't start

    Component that don't start (Forms, DAS, ...) In oidmon.log is ... 2002/12/06:12:11:34Failed to fetch Process Table. ORA-12571: TNS:packet writer failure 2002/12/06:12:11:34Error connecting database. 12571 2002/12/06:12:11:34Error : Guardian Process t

  • How can I get my published files in a folder back to Iweb? Iweb files deltd

    I have accidentally deleted the original files in Iweb for a site I have created and ftp up to a host, so they don't even exist in the domain.sites folder location it seems now and they were never uploaded to .mac. I have published them to a folder o

  • JSF2 and Facelets - Really stuck

    Hi all I have tried to port JSF 1 + JSP to JSF 2 + Facelets but I have stumbled onto this error when I viewed the page in the web browser:    XML Parsing Error: no element found    Location: http://localhost/index.xhtml    Line Number 1, Column 1:The

  • Basic problem in displaying the pdf and images in Application express

    Hi, I have oracle 10g and application express. I have already stored the images and pdfs using PLSQL in table with following columns TableA(vessel number, cruise number, image blob, pdf blob) now for every vessel, cruise combination there is a partic