Sharing calender for public appointments only not anything private

I'm looking for a way to share my calender in outlook 2010 or office 365 with a friend so that :
1) my calendar shows up in my friend's Iphone for all my public appointments but not anything I mark as Private .
2) my friend can add appointments in my calender i shared with her so that i can either "approve" or "reject" the added appointments in my calender
I'm thinking this feature must be there for people with Assistants. I would appreciate if someone could tell me how to do this
Thank you

Hello,
You can set delegate settings in Outlook by referring the following article:
https://support.office.com/en-us/article/Allow-someone-else-to-manage-your-mail-and-calendar-aaeedebe-9de0-4141-8323-029f4b836759?CorrelationId=940ed041-5f14-481a-92f0-d63ceee63578&ui=en-US&rs=en-US&ad=US
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Similar Messages

Screen Sharing works for alien hosts but not for LAN hosts

Hello!
I am having a really strange problem in a customer network. The network is a local private network with one MacOS Server 10.6.8 and around 12 iMacs running MacOS 10.6.8. The server is running headless in cellar so the user maintain the backup via screen sharing from an iMac to the server.
Since a few weeks they can not login to the server via screen sharing from any local host BUT I can login from my MBP (alien) via ARD or Screen Sharing without any problem. Even hosts connected to the network via VPN can connect to the server via screen sharing.
In short:
Every local host gets a message that login is not possible and my MBP and VPN-hosts get connected without any problems with the same credentials.
At the local clients I get this message in system.log:
Oct 28 09:33:41 verwaltung1 LKDCHelper[228]: Starting (uid=501)
Oct 28 09:33:48 verwaltung1 com.apple.launchd.peruser.501[166] (com.apple.Kerberos.renew.plist): Throttling respawn: Will start in 530 seconds
Oct 28 09:34:17 verwaltung1 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[195]: CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
and at the server I get:
Oct 28 09:33:48 solserv AppleVNCServer[11503]: no such user: adminloc@LKDC:SHA1.DE03ABCC86F74D11AD139E44388D6B94155B4D9E: 2
When I connect from VPN or my MBP I get no messages in system.log.
I tried to kickstart ARD at the server but it does not change anything, I bound the clients to OpenDir of the server with no effect also.
I do not have any idea what is happening here. Every help is welcome,
Christop

Hello MrHoffmann!
changeip says "The names match. There is nothing to change."
To give more infos, the server and all the clients are connected to the same network switch, all belong to 192.168.183/24 and when I use my MBP, it is connected via WLAN and gets an IP-address from this server with an IP from this range. my MBP is in the same broadcast domain.
VPN clients connect via PPTP to the gateway (192.168.183.1) and get IP addresses assigned from 192.168.183.48-52.
There is no routing between the clients and the server.
There is no other problem - every client reaches the server for file serivces (AFP/SMB), smtp, imap, DHCP and DNS.
BTW. screen sharing from the clients worked without a problem when I first setup the network about 1 year ago, but since a few weeks no client that belongs to this network can use screen sharing except for my MBP when I am at customer site.
History:
The new SLS is a replacement for an old Windows 2000 Server. Both servers ran in parallel for some time but within different IP-networks (all Macs at 192.168.183/24 - all Windows at 192.168.2/24) the gateway routed between both networks. But now it is time to switch off every windows computer because every service now runs at the SLS. AFAIK the windows 2000 Server is the last Windows machine in the network. We switched off DHCP at the windows server and switched on DHCP at the SLS a few weeks ago. Hm .... maybe there is something wrong? But the clients have fixed ip-addresses.
Still wondering what is going on here, bye,
Christoph

Need to apply payment for delivered items only, not full down payment

Version: (8.8 PL18)
Description of requirements: (Be able to handle the right amount of down payment when we copy a sales order to an invoice and there is a back order for some items. It actually works fine when we go on an invoice and we copy from a sales order, the system handles correctly the down payment amount when there is a back order. )
Valid as of: (29/07/2011)
Business needs: (They need to apply only the part of the payment for the delivered quantities, not ALL the payment. In addition, the risk of errors to choose the wrong order is higher when you use the u2018copy fromu2019 function)
Examples: (When you create a sales order with a down payment and you copy this document to an invoice and there is a back order, the amount of down payments should be adjusted according to the back order as it works now for the u2018copy fromu2019 function)
Current Workaround:
(We use the u2018Copy fromu2019 function.)
Proposed solution:
(The u2018Copy tou2019 function should work exactly as the u2018Copy fromu2019 function)

It's not just a licensing requirement. Without the RIKLA you cannot make Reader plug-ins at all. Adobe will vet your proposal and decide if they will permit it, and what license fee you will pay.

How to set column widths in tables for selected table only, not globally throughout document?

I've been utilizing the below script (thank you so much Ramkumar. P!) to set column widths throughout a sizable InDesign book with tables on every page and it is truly a time saver. At this point in time, I have three versions of it because there are different column widths throughout the book. Is it possible to augment the script to run only on a selected text frame (containing a table)? If so, would someone be kind enough to share the augmented script with me? I've been trying to figure out this seemingly simple change through trial and error with no success as yet. I realize this is a totally newbie request and I'm entirely at the mercy of the kindness of the Javascript gods that contribute within this forum. Seeing that in a different post related to this script, one such guru responded to a request as simple as "Where do I put the scripts in InDesign" gave me enough courage to ask for some help! Thank you in advance to anyone willing to provide a solution.
var myDoc = app.activeDocument;
     var myWidths = [100, 100, 150, 150];
     for(var T=0; T < myDoc.textFrames.length; T++){
         for(var i=0; i < myDoc.textFrames[T].tables.length; i++){
             for(var j=0; j < myWidths.length; j++){
                 myDoc.textFrames[T].tables[i].columns[j].width = myWidths[j];
     alert("Table width updated successfully...");

Hello all
I have the same problem in that I'm not a scripting person, but was able to get the above script working without problem, and it does set irregular table column widths perfectly, so thanks to Ramkumar. P for that.
BUT, it changes the column width for ALL tables in the document, whereas I would like to just target the selected table.
Any ideas as to how I might amend this script to achieve this?
Thx, Christian

DFS Replication for one group only not working

I have 2 DFS Replication groups and each group contains the same 2 member servers.
One group is set to replicate one drive pair between these members, and the other group is set to replicate another drive pair between the same member servers.
Replication works perfectly for one group / folder, but it does not even start on the other group.
This proves that there is no problem with the connectivity between the members, or to the AD.
The DFS Replication Health Report for the group that does not replicate shows no error, just 2 Warnings:
WARNINGS (2 servers with warnings)(Show All)
BOG-RODC (1 warning)
Reference member returned no replicated folders.
MTL-HV-FS01 (1 warning)
This member is waiting for initial replication for replicated folder BOG-RODC_D_Drive.
This is very weird, I don't see why it does not replicate, I'm pooling my hair out. Please help
Titus

follow up on the above issue: Yes I did delete the group, and DFSRPrivate folder and recreated the group again, but this did not help.
Problem has been fixed by Microsoft, I had to open a case with them. Apparently the Jet database that's hidden in the "System Volume Information" was corrupted, so not only he deleted the group, but did the following, changed permissions/ownership
to access the System Volume Information, then:
D:\>cd "System Volume Information"
D:\System Volume Information>cd DFSR
D:\System Volume Information\DFSR>dir
Volume in drive D is Data
Volume Serial Number is F4CD-B05B
Directory of D:\System Volume Information\DFSR
10/10/2014 11:09 AM <DIR> .
10/10/2014 11:09 AM <DIR> ..
10/02/2014 12:01 PM 0 $db_normal$
02/04/2015 10:14 AM <DIR> Config
10/10/2014 10:49 AM <DIR> database_E6F4_CDDD_F4CD_B05B
10/02/2014 12:01 PM <DIR> Private
1 File(s) 0 bytes
5 Dir(s) 1,558,208,782,336 bytes free
D:\System Volume Information\DFSR>rd database_E6F4_CDDD_F4CD_B05B /s /q
D:\System Volume Information\DFSR>dir
Volume in drive D is Data
Volume Serial Number is F4CD-B05B
Directory of D:\System Volume Information\DFSR
02/04/2015 10:20 AM <DIR> .
02/04/2015 10:20 AM <DIR> ..
10/02/2014 12:01 PM 0 $db_normal$
02/04/2015 10:19 AM <DIR> Config
10/02/2014 12:01 PM <DIR> Private
1 File(s) 0 bytes
4 Dir(s) 1,558,344,138,752 bytes free
Then as usually recreated the replication group. I haven't seen this information anywhere on the web or in the Microsoft site.
Hope this will help other people having the same problem as myself. Proceed with care.

How do I use my original iphone for videos & apps only, not as phone

I want to use my original iphone as a video and app player(not a phone) for my daughter, using my library of purchases on my account. I have an iphone 3G and my original iphone is not being used. How do I do this?

After an iPhone is no longer activated, you can't install a firmware update or restore the iPhone with iTunes (which re-installs the firmware) since activation is required in order to do so.
I'm not aware of a way to roll a restore back.
If you have the SIM card that was used when this iPhone was activated, you can try inserting the SIM card and do another restore. Someone here reported that it is possible to install a firmware update or restore an iPhone with iTunes that is no longer activated as long as the SIM card that was used with the iPhone when activated is inserted.
Message was edited by: Allan Sampson

Accessing a shared mailbox for users that do not have a mailbox associated with their AD account.

is it possible to give just AD users access to a shared mailbox via webmail in an exchange 2010 environment when those users do not have mailboxes associated with their AD account? They do have full access rights to the shared mailbox.

Hi Shmaxolin,
According to my experience and research, we can use AD account access to shared mailbox, as long as set properly permission.
We can use IMAP application to access it, please try following steps:
1. Make sure you have enabled IMAP and POP3 protocol.
2. Change IMAP4’s authentication to “Plain test logon (Basic authentication). No…..”(open EMC--->Server Configuration--->Client Access, switch to POP3 and IMAP4, right-click IMAP4 and select Properties, then switch to Authentication)
3. Use the following user format DomainName\Username\MailboxAlias (e.g. DOMAIN\John.Doe\Shared.Mailbox1) to log into the shared mailbox.
More details about Access shared/delegate mailbox of Exchange Server, please refer to:
http://www.limilabs.com/blog/access-shared-delegate-mailbox-exchange-server
Best Regards,
Allen Wang

Firefox v. 8.0.1 does not offer to remember passwords on sites even though I have checked the option to 'remember passwords for sites' - I am not in private browsing mode. how can i fix this?

google chrome DOES ask; mozilla firefox does not.
It has some memorized passwords, but all are left over from previous versions of firefox.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

OBIEE access denied for some users only

Hi All,
we are using OBIEE 10.1.3.4 version on windows envorinment .The users can access the OBIEE reports using 'PORTALPATH' session varible in RPD.For some of the users are got "access denied" while they are accessing for thir particular dashboard.Eariler these user got access this dashboard with out any errors.We dnt changed in our system anything from last three months.
We have no idea why we are getting these error for particular users only.Its Prod issue we need to reslove these error ASAP.
we are getting these error"acess denied for user to path/shared/shared/_test/testdashboard
Error Codes:09XNZMXB"
but last one year its working without any issues .From our side we dnt did any changes in production like RPD level,Catalog level and config file changes , we have no idea why suddenly we are getting these kind of error for some users only not for all users.
Could u please advice me how to reslove this PROD issueASAP.
Thanks,

Well its Prod (you have a dashboard called testdashboard in Prod?) anyway - someone might have changed the presentation catalogue permissions on the dashboard. All it takes is for someone to remove 'Everyone' or change a Group permission and it could effect.
If they changed the Parent folder and cascaded the changes down this might cause this issue.
You have a folder called 'Shared' - check the groups that the people are in have 'Traverse' , 'Read' or higher. Also chek dashboard permissions themselves from Settings-Manage Interactive Dashboards - Check the Padlock icon.
Are you users getting allocated into the correct WEBGROUPS ? Is this assisngment done explicitly in the webcat or via an RPD Variable ? Have you checked NQQueryl.log to make sure any init blocks are completing successfully?
Either persmissions have changed or group memebership is not completing.
Good luck
Alastair

Experience using Oracle for public sector budgetting?

I am looking to know if anyone has experience using Planning for public sector budgetting, not necessarily the PubSect app itself.
I am looking for some highlevel feedback regarding the biggest challenges in using Hyperion Planning for developing a government/state budget, where the typical cycle involves a parliament or another elected organ, etc.
I am aware of the Scottish government using one and Abu Dhabi also has it implemented but if you know others I would be delighted to hear of them.
Thanks All :) .
Agnete

We did think about using the device as a "Shared Device" but we thought this would get over complicated, as the library has requested that the users can just pick it up and use it without any hassle. Which in an ideal world would be easy but alas, it is not!
We also thought about using Single App Mode and locking it into the AirWatch Secure Browser, where we could disable things like caching and saving usernames and passwords etc!
Thanks for your reply!
Vish

How to enable https or SSL for login page only?

Hi,
My application is runnnin in iPlanet web server 4.1 version.
how to make my login page only secured (SSL)?
previously we have done https enable for the whole application. but client specifically wants for login page only, not for the whole application. how can i make SSL for login page only in iPlanet 4.1.
I searched through iPlanet console, but i didn't get any option such.
i found one more thing console,i.e., "encrypt on or off". if i put encrypt "on" means, it will be for the whole application? How can i make it for login page only.
Do i need to do any code changes for that?
i tried through web.xml security constraints tags, but it is not working and taking that file as we are doing everything in servlet.properties and rules.properties files.
can anybody help me in this regard?
Regards,
Chandu

You specify SSL in web.xml of your application. So, in that case other web applications in same server would not be affected.
<security-constraint>
<web-resource-collection>
<web-resource-name>myresources</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>Following link will help you to setup SSL in tomcat:
[http://techtracer.com/2007/09/12/setting-up-ssl-on-tomcat-in-3-easy-steps/|http://techtracer.com/2007/09/12/setting-up-ssl-on-tomcat-in-3-easy-steps/]
Thanks,
Mrityunjoy

Currently, I have 5 iPads used for the same purpose. Since similar data /application is shared among all of them, is it alright for me "Backup" only 1 iPad. And in which case, if anything happens to any of the other iPads I can still recover the data

Currently, I have 5 iPads used for the same purpose. Since the same data /application is shared among all of these iPads, is it alright for me "Backup" only 1 iPad instead of all 5? And if anything happens to any my iPads which I have not backed up, I can restore it from the iPad where I have save the Backup. I am hoping by doing so, I will also be able to save some icloud storage space. Let me know if my question is still not so clear to you guys. Thanks.

Hello PeachY1234,
If I understand correctly you'd like to save iCloud storage space by only backing up 1 of the 5 iPads to your account since they are all going to have very similar data and usage. You certainly can do that, but I do have to warn you that any unique data between them would be lost if you had to restore from that one backup made on another iPad so just keep that in mind. If you do need to restore in the future you can use this article to restore that iCloud backup:
iCloud: Restore or set up your iOS device from iCloud
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT4890 Shared photoStream not working for public share

Shared photoStream not working for public share and keep showing the same url for the first shared stream i have published. this means everytime i try to share to anyone else not using an iphone it comes up with page not found. I have also notice the in first initial public url which was given is the same url keeps showing up everytime i try to make it public. how do i reset or change that url so other public share stream will work. how do i get this to work

I've read some posts from users with a similar problem who were able to fix this by changing the download folder (or just click Change next to Download Folder, then click cancel). Not sure if this will work for you but thought I would pass it along.

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

What OS are you running.. this is usually only a problem in Mavericks.
If so I recommend you mount the hard disk manually..
Use Go, Connect to server.
Type in the IP address if static.. eg
AFP://10.0.1.1
Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
Type in
AFP://TCname.local Where TCname is replaced with the actual name.
You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

Change public share access to read only for public and full access to selected users

Hi, new to the community just purchased a recertified WDMyCloud 2TB after my 2 years old MyBookLive 2TB HD died due to accidental power cable unplugging. I've got everything setup including MiniDLNA by following instructions on this forum and everything is working exactly as I want it to except public share. I want public share to be set to read only access for public and full access to certain users (just myself at the moment) and having a "upload" folder within this share with full public access to everything in this folder would be a bonus. I tried login in to ftp with root user and removing write permission for public but that blocks me out as well. I'm sure it's possible by doing some majic on SSH but I wouldn't have a clue so hoping someone here would be able to help me out.

Mr_Khan wrote:
What i want is public to have read only access to file server. Public as in users who do not have a user account on mycloud. E.g someone who connects to to my home network for the first time and is able to browse and download content from public share. I'm aware of being able to set indivual access to shares for users like full access, read only and no access but public users won't have a user account.Through the My Cloud UI interface what you seek to do is not possible. The public share like all other share folders are an all or nothing affair when using the adminstration UI. When using the administration UI you do not have granular control on shared folders to limit non users to read only access or set permission levels for subfolders. The workaround to do what you seek and have the public folder set for read only is to change the folder settings via SSH. It may take some work to set the folder security so that users can read/write to the public folder while the guests only have read access. However, if you reboot the WD My Cloud or update the WD My Cloud firmware those settings may be reset back to the default settings where the entire public folder is read/write for all. There are way to prevent this but again it will take a bit of coding to do so via SSH. See this link (even though its for the WD My Book Live) for a starting point on how to use SSH to change the permission levels on the public folder. Another option if one doesn't go the SSH route is to turn off public sharing for the public folder then create a "guest" user account and give that "guest" account read only access to the public folder while all other user accounts have full read/write access.

Sharing calender for public appointments only not anything private

Similar Messages

Maybe you are looking for