Sharing Canon LBP7010C no longer works in Mavericks

I've noticed there's plenty of troubles with network printing in Mavericks. Here's mine:
I have an MacBook Air 2012 and a new iMac, with Canon LBP7010C connected to it. Both computers have the most recent (10.9 compatible) drivers installed and can print via USB. The printer, shared by the iMac, shows up in the printer settigns and everything seems OK.
However, when I try to print from the MacBook Air, the job starts, goes on for a while and then the entire printing queue simply pauses. The printer doesn't even wake up and the job doesn't appear in the Canon's monitor on the iMac, so I assume MacBook has troubles connecting to the iMac and the printer to begin with.
I should add that sharing the printer worked properly under 10.8.
I've tried reinstalling the drivers, removing the printer and adding it again and other typical troubleshooting steps, but to no avail. Is there anything else I could try? Anyone has any luck sharing this type of printer over local network?
Thanks in advance.

Follow up:
1. Selecting Generic PS printer works. Thanks for this suggestion. I cannot set any of the printer-specific settings, but I can print over Wi-Fi when I need it. That's something.
2. In Japan printer servers made by Silex (C-6600GB and a others) are officially recommended by Canon and listed on their page as compatible with their printers. If I understand correctly (I'm not a specialist), Canon printers require two-way communication between computer and the printer (as the page is being rendered by the computer rather than the printer, compressed and then send to the device) and most generic print servers do not support that functionality.
Unfortunately that means Silex' print servers require special software of its own to connect with a Mac. This software won't install on 10.9 and may be incompatible with Maverics to begin with (it includes a kernel extension). It also isn't clear if the serwer would work with LBP7010c at all, even though it does support this model of the printer on Windows (documentation on the Silex' site is outdated and lists LBP7010C as lacking any Mac driver support from Canon, which isn't true).
This is, coincidentally, the reason why these Canon printers won't work with the Airport base stations either.
3. Canon is forcing some sort of proprietary printing technology (CAPT) rather than go with standard solutions. Too bad I've learned too late about the related inconvenience. The drivers have worked properly with my 10.8 Macs and only now in 10.9 the fact basic OS X features (printer sharing) are unsuported has come to my attention. I'm waiting for the support to reply right now, but I'm not particualrly impressed by Canon right now and would probably advice against buying their products for Mac.

Similar Messages

Canon LBP6300dn no longer works after mavericks update?

Hi
I have a Canon LBP6300dn laser printer that i was happily using over a network until i update to Mavericks last night.
Ive tried various mac drivers for the printer and have been able to get it to physically print but its illegible info - just random lines/marks
of course Canon do not appear to have a specific driver for mavericks!
Can anybody help?
thanks

I have now managed to get the Canon LBP6300dn printer working on my network (i.e. I did not use USB at all).
In case it helps others, here are the steps I performed.
Infrastructure:
My printer is connected by LAN cable to my Airport Extreme.
The Airport Extreme has a DHCP reservation defined for the printer (e.g. fixed address of 10.1.2.3).
I need A4 as the default paper size, so I installed the UK version of the driver (Mac_CAPT_V365_uk_EN.dmg). I do not know if the locale makes any difference.
I orginally set-up the printer when I used Mountain Lion.
My Mavericks installation on my laptop was clean (i.e. the hard disk was reformatted first)
Set-up:
The printer was switched on and installation was done on my Mavericks laptop over WiFi.
Double-click the .DMG file and follow the instructions.
Open System Preferences | Printers & Scanners.
Click + to add a new printer, the Add dialog should open.
For me, nothing appeared under the Default tab.
Click the IP tab.
In the Address: field: I entered the fixed IP address of my printer (e.g. 10.1.2.3).
The IP address should be automatically validated.
The Protocol: Field was set to Line Printer Daemon - LPD.
After a few seconds, the Use: field should display “Generic PostScript Printer”
Click on the Use: field’s menu to display available options and then pick “Select Software …”
In the Printer Software dialog, select “Canon LBP6300 CAPT (UK)” . Or the equivalent for your locale. Click Ok. Note: I could not get the “Canon LBP6300n CAPT (UK)” to work.
For me, an error “Unable to verify the printer on your network appeared”, but I clicked Continue.
I left the Paper Source Options set to none. (I do not have the 500 cassette.)
I clicked Ok to finish the adding of the printer
After this the printer was finally working for me, including duplex printing.
Anyway, I hope this might help others that are struggling with Mavericks and the Canon LBP6300dn printer.

Shared Canon MP390 no longer works with Leopard wirelessly

Please Help. I previously had Tiger on my new Macbook and setup a Canon MP390 through Windows SMB. The Printer is connected to a XP machine and shared. Once I upgraded to Leopard, the printer is gone, and I cannot re-install it. I have connected it directly to test the Leopard drivers and the printer was detected and printed right away. I have called Apple Support. They had many suggestions, but none of them worked. If anyone has successfully setup a network printer in Leopard that is physically connected to a windows xp machine, Please Reply. Thanks.

Fixed. Add the TCP/IP print server service on the windows XP machine. Set the service to start automatically. Share the Printer. Then go to IP Printing in Leopard Print Setup and put the desktop's IP address, Printer name, & driver. It worked right away.

HT6114 My CanoScan 8600F no longer works with Mavericks- No drivers available from Canon

My CanoScan 8600F no longer works with Mavericks upgrade. Canon does not offer new drivers.

The Canoscan Toolbox works with Mavericks to scan, copy, etc.
If you have Photoshop or Photoshop Elements the drivers can be installed so one can scan from within those applications.
All the necessary software (CanoScan Toolbox 5.0.1.2 Installer) can be obtained from the Canon site.
And, as Eustace mentioned, Vuescan works.
OT

Hello Folks! - Have a Samsung ML 2165w which will no longer works since Mavericks, tried reinstalling and the 'Continue' button at the SLA is greyed out. Any ideas? Cheers 'n thanks for any feedback.

Hello Folks! - Have a Samsung ML 2165w which will no longer works since Mavericks, tried reinstalling the software and the 'Continue' button at the SLA page is greyed out. Any ideas?
Cheers 'n thanks for any feedback.

Went around the long way and reinstalled Mavericks since the Mac was acting a little flakey occasionally of late, and now the printer as once again been installed and works ok by wire. Have not yet had time to try to connect wirelessy yet, so...
Cheers!

Sharing Preference Pane no longer works.

Hi,
I can no longer open my Sharing pref pane.
When I try to open it I have a message telling that pane loading failed.
In console.log I have this :
2006-09-03 01:08:00.023 System Preferences[22750] * -[NSBundle load]: Error loading code /System/Library/PreferencePanes/SharingPref.prefPane/Contents/MacOS/SharingPref for bundle /System/Library/PreferencePanes/SharingPref.prefPane, error code 2 (link edit error code 0, error number 0 ())
2006-09-03 01:08:00.023 System Preferences[22750] [NSPrefPaneBundle instantiatePrefPaneObject] (/System/Library/PreferencePanes/SharingPref.prefPane): principalClass is nil.
Any idea on how to fix this problem ?
Thanks <hr>
PB G4 12" Mac OS X (10.4.7)

Follow up:
1. Selecting Generic PS printer works. Thanks for this suggestion. I cannot set any of the printer-specific settings, but I can print over Wi-Fi when I need it. That's something.
2. In Japan printer servers made by Silex (C-6600GB and a others) are officially recommended by Canon and listed on their page as compatible with their printers. If I understand correctly (I'm not a specialist), Canon printers require two-way communication between computer and the printer (as the page is being rendered by the computer rather than the printer, compressed and then send to the device) and most generic print servers do not support that functionality.
Unfortunately that means Silex' print servers require special software of its own to connect with a Mac. This software won't install on 10.9 and may be incompatible with Maverics to begin with (it includes a kernel extension). It also isn't clear if the serwer would work with LBP7010c at all, even though it does support this model of the printer on Windows (documentation on the Silex' site is outdated and lists LBP7010C as lacking any Mac driver support from Canon, which isn't true).
This is, coincidentally, the reason why these Canon printers won't work with the Airport base stations either.
3. Canon is forcing some sort of proprietary printing technology (CAPT) rather than go with standard solutions. Too bad I've learned too late about the related inconvenience. The drivers have worked properly with my 10.8 Macs and only now in 10.9 the fact basic OS X features (printer sharing) are unsuported has come to my attention. I'm waiting for the support to reply right now, but I'm not particualrly impressed by Canon right now and would probably advice against buying their products for Mac.

Presonus FP-10 no longer works after Mavericks update

I updated my Mac Mini to Mavericks and now my Presonus FP-10 will not work. I know that Presonus has made a statement that FP-10 is no longer compatible with Maverick or Mountain Lion. I had it up and running in Mountain Lion. My question is can I reinstall Lion or Mountain Lion to fix this urgent problem. I am using my Mac Mini O SX 10.9 as of now.

I have now managed to get the Canon LBP6300dn printer working on my network (i.e. I did not use USB at all).
In case it helps others, here are the steps I performed.
Infrastructure:
My printer is connected by LAN cable to my Airport Extreme.
The Airport Extreme has a DHCP reservation defined for the printer (e.g. fixed address of 10.1.2.3).
I need A4 as the default paper size, so I installed the UK version of the driver (Mac_CAPT_V365_uk_EN.dmg). I do not know if the locale makes any difference.
I orginally set-up the printer when I used Mountain Lion.
My Mavericks installation on my laptop was clean (i.e. the hard disk was reformatted first)
Set-up:
The printer was switched on and installation was done on my Mavericks laptop over WiFi.
Double-click the .DMG file and follow the instructions.
Open System Preferences | Printers & Scanners.
Click + to add a new printer, the Add dialog should open.
For me, nothing appeared under the Default tab.
Click the IP tab.
In the Address: field: I entered the fixed IP address of my printer (e.g. 10.1.2.3).
The IP address should be automatically validated.
The Protocol: Field was set to Line Printer Daemon - LPD.
After a few seconds, the Use: field should display “Generic PostScript Printer”
Click on the Use: field’s menu to display available options and then pick “Select Software …”
In the Printer Software dialog, select “Canon LBP6300 CAPT (UK)” . Or the equivalent for your locale. Click Ok. Note: I could not get the “Canon LBP6300n CAPT (UK)” to work.
For me, an error “Unable to verify the printer on your network appeared”, but I clicked Continue.
I left the Paper Source Options set to none. (I do not have the 500 cassette.)
I clicked Ok to finish the adding of the printer
After this the printer was finally working for me, including duplex printing.
Anyway, I hope this might help others that are struggling with Mavericks and the Canon LBP6300dn printer.

HP OfficeJet 6500A fax no longer works after Mavericks update

After updating to Mavericks and installing the HP software drivers, the fax component no longer works. I installed the fax part of the update, and when I print to fax, instead of triggering the machine to dial a number like it did in Mountain Lion, the printer prints out garbage text. There's no relevant support page on HP's website about this issue. Anyone got their HP fax to work via print to fax from their Mac?

Hello Peter,
It sounds like you are not able to fax from your HP OfficeJet 6500A. I recommend the following steps for the issue you described:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

Script no longer working under Maverick

I just upgraded to Maverick over the weekend and I can not figure out why this script no longer works. It has been working for the last 5 years.
The script moves a file my server sends per e-mail to a folder on a partition on my Mac. Here is the script.
tell application "Microsoft Outlook"
          set selectedMsg to (current messages)
          set selectedMsg to item 1 of result
          set msgAttachment to attachments of selectedMsg
          set msgAttachment to result's item 1
          set attachmentName to name of msgAttachment
          set attachmentFile to ((path to desktop) & attachmentName) as text
save msgAttachment in attachmentFile
end tell
delay 3
set submitfolder to "OS E:Users:e:Desktop:" as alias
set collectionfolder to "/Volumes/Data E/Consulting/Telephone Switch Record/2014" as alias
tell application "Finder" to move (every file whose name contains ("week ") & (do shell script "date +%U")) to collectionfolder
delay 2
tell application "Finder" to move (every file whose name contains ("week ") & (do shell script "date +%U")) to trash
I now get:
If I run:
tell application "Finder"
          open ("/Volumes/Data E/Consulting/Telephone Switch Record/2014" as POSIX file)
end tell
it opens the folder no problem so the path must be ok? or?
Any ideas why it is broken?

Are you getting the error on this statement
set collectionfolder to "/Volumes/Data E/Consulting/Telephone Switch Record/2014" as alias
or when you do the move? And what is the error number you are getting?
Also try this
set filePart to "week " & (do shell script "date +%U")
log filePart
tell application "Finder" to move (every file whose name contains filePart) to collectionfolder
to see what the string looks like.

Option-drag contacts to Finder no longer works in Mavericks

In all versions of Contacts and Address Book you could select multiple contacts, hold down the option key, then click and drag them into a folder, which would result in a separate vCard for each contact. If you did not hold down Option prior to dragging, all contacts were combined into a single vCard (eg: John Smith and 10 others.vcf).
I just installed Mavericks and now the option-drag method no longer works. As I drag the contacts to a folder everything looks like it is working as normal, except that when I drop, nothing shows up in the finder, the folder remains empty. If I don't hold down the option key, it works as normal and a single vCard is created for multiple contacts. Dragging one at a time also still works.
I would like to know if others are experiencing this as well. I assume this must be a bug, as without this ability the only way to export multiple separate vCards (that I know of) would be to drag them one at a time.

It's frustrating when Apple removes a feature you're used to using... But when they close a door....
Do the following:
1) Open the Contacts Application and select all the contacts you want to export
2) Open the Automator application and create a New Workflow
3) Select "Contacts" from the Library panel at the left
4) Drag the action "Get Selected Contact Items" from the middle panel and select "Get Selected PEOPLE" from the drop-down menu.
5) Drag the action "Export vCards" from the middle panel and select "Export INDIVIDUAL VCARDS" from the first drop-down menu and select a destination FOLDER from the second drop-down menu. Just create a new folder on your Desktop and select it, you don't want to save directly on the Desktop as this will put all your individual vcards there.
6) Run the workflow by hitting the PLAY button at the top-right of the window.
Optionally, you can save the workflow for future use, but the best practice would be to use the Get Selected Items and not the Get Specified Items, as the later would only export the contacts you already have there and not the new ones, I believe.
In any case, there's the window!
Rick.

Which Apple app's will no longer work in Mavericks?

I am using OS 10.8.5 on my MacbookAir. I was contacted by Apple to download a free update to Mavericks, OS 10.9.
I am very suspicious after having been many times forced to buy new apps working under newer Apple operating systems, because some previouly working apps suddenly no longer did after an Apple System upgrade was installed.
I lost mountains of important files created with Applesworks, including important spread sheets and data files which suddenly no longer opened because the Apple appllication used to create them was no longer supported by the newer Apple OS.
I also recall the total mess with earlier iMovie and iDVD updates most of which ensured that previous iMovie and IDVD schemes coukd no longer be opened or used.
Since Apple does not inform users of such problems before the updates are downloaded, maybe it will be of great benefit to get
a reply from other users who have upgraded already to Mavericks.
So which apps, if any will no longer work, if the OS is upgraded to Mavericks?

You were contacted by Apple to download Mavericks? Really?
We wouldn't be able to give you a blow by blow description of which apps will or will not work with Mavericks. There are a lot of people who have upgraded to Mavericks and are not having any issues whatsoever.
There are others who seem to be having every possible issue you can think of.
I would imagine that the difference in experiences here is due to the types of sofware people are running, the amount of CPU capacitity they are using to run various apps, games, etc. Whether or not they are running non-Apple applications, how often they have dropped their laptop, etc.
Since you seem concerned with messes, and problems, and losses of files, then unless you have some burning need to upgrade right at this very moment in it, it seem like it might be prudent to wait.
That's what I am doing. I am perfectly happy with Mountain Lion. There is nothing in Mavericks that I feel I can't live without for awhile. Eventually, I will be upgrading to Mavericks, because I don't want to fall behind in OSX levels for my machine. But for now, there is simply no pressing need to do so.
Bugs are being worked out. Fine tuning is being done. Enhancements are being made.
So, why rush into somehting that has been out for only two months....what's the hurry? It's not going anywhere anytime soon....
GB

Applications no longer work with mavericks

After downloading Mavericks,
1. Applications no longer work, Dreamweaver, Photoshop, microsoft Office, Illustrator, and more
2. Multiple displays no longer work
3. Tried restoriing, but would not let me.
What is the fix to this... Anyone know?

1. Applications no longer work, Dreamweaver, Photoshop, microsoft Office, Illustrator, and more
If coming from Snow Leopard, then PowerPC based apps will not run on anything beyond Snow Leopard.
2. Multiple displays no longer work
Multiple monitors work for me. There are people that have some issues with multiple monitors. Look at
<http://discussions.apple.com/message/26542996?tstart=0#26542996>
Does that help?
Or can you please describe how it doesn't work.
3. Tried restoriing, but would not let me.
Restoring what? the older version of Mac OS X? What version is that? Did you make a backup before upgrading? If so, what kind of backup?

HT6114 HP Office Jet Pro 8500 Scanner no longer works with Mavericks upgrade

I have an all-in-one printer/copier/fax/scanner, HP Office Jet Pro 8500. The scanner no longer works with the Mavericks upgrade. Is it possible to get the scanner back in use? The printer and fax is fine, but I really use the scanner a lot. Please helap me.

The following link to the HP Support site indicates that scanning is still supported for the OfficeJet Pro 8500 using Mavericks but also indicates that "you may need to scan in a different way than you did before you installed Mavericks." See the FAQ section of http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en &os=4159&product=3752456&sw_lang=#N1237

Xerox workcentre 7535 print driver no longer works with Mavericks 10.9.2

Unable to change any settings in Print dialog pane for Xerox WorkCentre 7535. Xerox says its an Apple software problem. They have issed three revised drivers since Apple released Mavericks OS-X 10.9.2. Not only does latest driver (4-11-14) not work, their universal driver for Mavericks no longer works. Anybody else trying to print on a Xerox device?

I think I solved this. Our Canada office has a WorkCentre 7556, and it was having the same problem(s).
Here's what I found and did:
Log into the printer's web interface. Go to the Properties tab. On that page, expand General Setup. Then click Configuration Report.
Find and click the link for Machine Hardware. In that box, find a line item for Finisher Type. Scribble down or remember your finisher type (ours was Xerox Professional Finisher).
On the Mac in question, go to System Preferences, Printers & Scanners. Find your Xerox printer, click Options & Supplies, and then the Options button. Now on our machine, from a default installation, the finisher was set to OCT (Offset Catch Tray) and was greyed out. Changing this to the correct finisher mentioned above made all of our errors go away.
Cheers, good luck, and um, I guess mark as Answered if this works for you please?

Home Sharing in iTunes no longer working with Lion....

Anyone else having this problem?? I have not seen it as a topic.
We have 2007 iMacs so chips do not support Air Drop. However, I would not think Air Drop would be required for home sharing in iTunes.
Moving to Lion has not been a very good experience for me so far with peripherals, but to lose home sharing in iTunes on top of it... I don't even want to finish this sentence.

I just discovered that after the iTunes update and the Lion update, my iTunes wouldn't update anything except what was in the library already. New songs, apps, movies all equaled bupkiss. I went into advanced settings and saw that my library location was blank. I'm using an external drive for my music. So there's a bug, since it would play everything thing in the library but was unsure where the library was so that it could write to it. I just relocated my media drive and now sharing and updating the library works fine.

Sharing Canon LBP7010C no longer works in Mavericks

Similar Messages

Maybe you are looking for