Sharing/Exporting Problem

I created a project. No problem. I can view the project in IMovie. No problem. The problem is trying to export or share the project so I can burn it onto a DVD. Regardless of how I export or share it, after I export or share it, several of the video segments in the project are dark. The sound is there, just not the video. Any suggestions, ideas?

I can see clearly now, for some reason, the format of my video is "Animation"
Yes, this is a known problem. Animation is frequently used as an "intermediate" file format by applications like LiveType and Snapz Pro X. Until Apple can figure out the problem, the only remedy is to convert these files to another format. Havent tried it but if you are "adventurous," you could try converting the files while they are in the event folder ensuring the new files have the same name, trash the event and project thumbnails, and re-open iMovie '08 to see if it re-generates the thumbnails properly without having to re-edit the project. As I say, I've never tried this and have no idea what would happen.

Similar Messages

Hi Expert , crystal report export problem. system not responding

Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar Gupta

Dear Raj,
Please try this
          Try
            Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
            Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
            Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
            Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            rptDoc.Load(rptPath)
            rptView.ShowExportButton = True
            rptView.ReportSource = rptDoc
            For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
            Next
            For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                    If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                        oSubReport = rptObject
                        rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                        For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                            oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                        Next
                    End If
                Next
            Next
            'Setting Paper
            Dim rawKind As Integer = 0
            Dim printSet As New System.Drawing.Printing.PrinterSettings
            For i As Integer = 0 To printSet.PaperSizes.Count - 1
                If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                    rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                    Exit For
                End If
            Next
            Dim MyTest As New SaveFileDialog
            rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
            rptDoc.ExportToStream(ExportFormatType.Excel)
            'rptDoc.SaveAs("C:\TBKING.xls", True)
            '''How to export the report
            Try
                Dim CrExportOptions As ExportOptions
                Dim CrDiskFileDestinationOptions As New _
                DiskFileDestinationOptions()
                Dim rename As String
                rename = rptName.Replace(".rpt", "")
                Dim CrFormatTypeOptions As New ExcelFormatOptions
                CrDiskFileDestinationOptions.DiskFileName = _
                                            "c:\Report\" & rename & "_Export_File.xls"
                CrExportOptions = rptDoc.ExportOptions
                With CrExportOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.Excel
                    .DestinationOptions = CrDiskFileDestinationOptions
                    .FormatOptions = CrFormatTypeOptions
                End With
                rptDoc.Export()
            Catch ex As Exception
                MsgBox(ex.ToString)
            End Try
            '' end by kevin shah
            rptView.Show()
            rptView.ShowExportButton = True
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = True
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "Report Viewer"
            oFrm.Text = "Report Viewer11"
            oFrm.ResumeLayout(True)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            objMain.objApplication.MessageBox(ex.Message)
        End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin

IMovie trouble sharing/exporting

hi i am having issues with sharing/exporting the movie. i can see the full version run through well in iMovie, however when it comes to sharing/exporting, i can hear the audio but the images arent coming through- they are distorted. i have prepared for publishing as well, turned it into 720 and 1080 but still no joy.

I'm not too well up on Mac OS X Error Codes - even though I've googled this for you, and suggestions seem to indicate that Error 0 means "no error", but that doesn't sound right - so all I can offer is:
Error codes are 'pre-written' and have to cover a wide range of circumstances, so they're not always appropriate to the actual problem (..like in DOS, "Bad command or filename" could mean almost anything: mistyped word, command term is missing or in the wrong place, program doesn't exist or has been moved, etc).
So the actual wording of an Error message may imply something quite different, e.g; you "don't have permission" to write to a disc may mean that the disc is actually full, so there's no more room to write to it.
If you've already made three iMovie projects, and created two iDVD projects from those, and none of that material has been deleted from your Mac, then perhaps you're running short of space. Why not check and see how much free space you have on your iMac, as burning a DVD can need up to about 4.5 GB of empty space to build the DVD "disc image" (..depending on how long the DVD runs for).
Not having "permission" to do something can also mean that various files may be in the wrong places ..which sounds like the consequence of renaming folders, or moving programs out of the folder where the system expects to find them. Could you have renamed any other folders, beside the 'Pictures' which you've now corrected? Could you have moved the iDVD program - or any other item which iDVD is trying to use - from its original position?
Not having "permission" to do something is such a catch-all, that you'd really have to narrow things down to what exactly is different, or what changes you've made on your Mac, between earlier projects and this latest one.
Sorry not to be any more helpful than that!

Is XML Publisher causing shared memory problem..?

Hi Experts,
Since this week, many of the Requisition/PO are erroring out with the below errors or similar to these errors:
- ORA-04031: unable to allocate 15504 bytes of shared memorny ("sharedpool","PO_REQAPPROVAL_INIT1APPS","PL/SQL MPCODE","BAMIMA: Bam Buffer")
ORA-06508: PL/SQL: could not find program unit being called.
-Error Name WFENG_COMMIT_INSIDE
3146: Commit happened in activity/function
'CREATE_AND_APPROVE_DOC:LAUNCH_PO_APPROVAL/PO_AUTOCREATE_DOC.LAUNCH_PO_APPROVAL'
Process Error: ORA-06508: PL/SQL: could not find program unit being called
Few days back we were getting heap memory error for one of the XML Publisher report.
I heard that XML Publisher requires lot of memory for sources/features,So I want to know whether XML Publisher can be one of the cause for memory problem to occur or this shared memory is not related with XML Publisher sources at all.
Please advice.
Many thanks..
Suman
Edited by: suman.g on 25-Nov-2009 04:03

Hi Robert,
Thanks for your quick reply...
Apps version: 11.5.10.2
database version: 9.2.0.8.0
As I am a beginner in this so dont know much about this.. Can you please guide me on this.
DBAs has increased the shared memory and problem has resolved but here I am more concrened whether the XML Publisher was or can be one od the cause for shared memory problem. Is there any way to check that or this occurs randomly and we can not check this.
Please advice something.

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

Export Problem in LR 3.5

Hi folks,
I have been working with LR 2.7 for a while now and was happy with it.
PC - Win XP - LR3.5
Photo's stored on external hard disk (K:)
The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
I tried with a photo from an older folder of my usual camera and everything works fine there.
The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
Anybody any ideas to help me out?
Thanks and grts
Nil

@ web-weaver:
Of course they go to a different folder and they also get different
titels/names once processed in LR. The originals are always RAW (NEF) and I
export them as jpg or tiff files depending on what more I will do to them.
@ ssprengel:
I get the message when I have renamed the file in the export window, set
the folder it has to go to and hit export.
In the 2.7 version I got it already when I tried to import.
As I said, this only happens with the Nikon (NEF) RAW files. With the
Olympus (ORF) RAW files I have no problem at all and had no problem in LR
2.7 either.
I cannot see anything wrong in the Export panel nor in Preferences.
Plug in is Metadata Wrangler and has been updated to the latest version >
no joy...
I tried import/export with jpg files and no problem there.
Yesss! Got it! What I had overlooked was a question mark next to the folder
in Library (sooo small). A rightclick and telling LR where it was solved
the problem. Strange, though, as it has never done this before... the main
folder and the path are still the same as the ones that work perfectly with
Olympus exports... just a different subfolder named Nikon and another named
Test... Also strange that if I started off with jpg, it was no problem
either...
Anyway, thanks a lot for shaking my senses for me
Nil
2011/12/10 web-weaver <[email protected]>
Re: Export Problem in LR 3.5 created by web-weaver<http://forums.adobe.com/people/web-weaver>in
Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4075999#4075999>

Downloaded & Installed Photoshop Elements/Shared Technologies Problem. What do I do?

I downloaded & Installed Photoshop Elements 11. There is a Shared Technologies Problem. What do I do? It says to reinstall the whole program. Do I need to do that?

Refer to this:
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Mylenium

Export problems- it's renaming my MOVs to strange things and they're huge!

Hey guys,
strange fcp export problem. I have a 10 minute anim compressed fcp project, 1920x1080, 30fps on a top-of-the-range macbook pro with external terabyte HD. I did a test export a couple of days ago, because our deadline is really soon, and that all worked fine - a 10 minute quicktime, 100% anim codec, was 26GB. That was fine. I did another test clip, just a spinning bitmap for 10 mins, from AfterEffects with similar, succesful, results and file sizes.
Now, however, when I export, it comes out as 60GB, and FCP changes the filename to something which is the first half of the filename I chose, and a strange number for the second half which is different each time I try it. Something like "filena#CF342.mov", for example. This file seems to have video in it OK, but it's 3 times the size, and the data rate is much higher, too high to play back.
The only changes I've made since my successful test are replacing many of the low res previews with hi res versions, and adding 1 minute to the end. And I changed my QMaster setup, not sure if that's anything to do with it.
Anyone got any ideas? I'm getting pretty worried.....
thanks in advance....

Thanks for the quick reply! No, don't think that's the problem. The new render doesn't have an alpha channel - it's Animation 100% Millions (not Millions+), and I don't think that would add more than 25% to the file size anyway. It also wouldn't account for the strange renaming of filenames. And the increase in length is only 10%. The file size has tripled!
The final delivery format was going to be animation, 1920x280, because it's going to projected on a 30m wide cinema screen and live TV tomorrow night but our playback solution (while it handles the test files ok) can't handle the data rate of these strange new files: it's 800mb/s, which is pretty ridiculous.
The renaming of the files suggests (to me at least) some kind of bug/error, but it doesn't report any kinda error in either fcp or quicktime.
Plan B is to recompress the strange big file using h264 which gives an ok quality and is 10% of the size. Reason I'd like to do it animation is I need to do several versions with different gamma, so I need to do further processing on the rendered file after it's dumped from FCP.
Any thoughts? I'd like to get to the bottom of this.
one thought - I didn't tick "recompress all files" and some of the source DOES have alpha - would it be taking the alpha channel even though I didn't ask for it?

Export Problem Solved (new problem)

I had posted earlier about export problem it was a silly mistake as i had kept hide extention on dats y it happened
Now problem is when i export the exported video has some pixcels and it hangs in between dunno wats wrong

What's a pixcel?
Pixel?
All video has pixels.
Seriously, your question is completely incomprehensible.

CS4 Export Problem

I have an external hard drive to which I export my encoded CS4 video files once I have finished editing. The problem is that, in doing so, space seems to be used also on my C drive. I need to find and delete these files on my C drive once my PP project files are rendered to my external drive. I have looked in temp files but they not there. Can anyone advise me on this?

That's done it S.V. Many thanks!
Lewis B.
Date: Mon, 13 Sep 2010 11:13:53 -0600
From: [email protected]
To: [email protected]
Subject: CS4 Export Problem
I'm a newbie so don't take my word as gospel buuuuttt....
If you're using Vista you might be making the same mistake as me. Go edit>preferences>media, hover the mouse over the media cache files location (i.e. C:\yadayada) and TYPE that into the bar at the top of the my computer. Don't click through and try and find it, TYPE it like you would an internet address in a web browser.
Silly Vista.
>

Excel export problem using craxddrt

Hi,
I'm using craxddrt v.11.5 in our intranet application to export rpt.reports to different formats. My code works well with PDF and text exports, but when it comes to Excel after the .Export(false) method executes the browser window just goes into idle then the session finally expires. I never catch any error. I have tried several export options with no prevail.
I suspect the Excel export is missing some info to complete and it is trying to prompt me, but no visible prompt gets displayed/answered so it just expires.
Could anyone help me out. I've spent several days researching and fixing the code and ran out of ideas.
Sincerely
Steve Komaromi

Hi Steve, Is there some reason you are posting this question over and over again?
Try looking at your same post: Excel export problem using craxddrt
Also, RDC is legacy product. Look for you answer where you posted the exact same question in the legacy forum.

FCP quicktime conversion export problem

issue exporting still image instead of video
FCP quicktime conversion export problem
within the last 2 weeks i have exported from FCP studio 7.0.3 as quicktime conversion, the settings are:
export as QuickTime Conversion:
> Options> quality> set to Best>
Standard Video Compression Settings
Compression Type: H.264
Motion:
Frame Rate: Current fps
Key Frames: Every 24 frames
check Frame Reordering
Compressor:
Quality: Best
Encodeing: Best (Multi-pass)
Data Rate:
Automatic
Filter… none
Size>
Dimensions:
NTSC 720x486 16:9
>ok
Sound: (don't change anything)
Format: Integer (Little Endian)
Sample rate: 48.000kHz
Sample size: 16-bit
Channels: (L R)
>Export
the results i get a odd. - the video exports fine, except for the beginning titles, instead a still frame image from somewhere else in the video occupies that intro, until the first transition- in this case- dip to white, then the rest of the video is fine. the portion of the beginning that does not show are composed of: livetype text credits in V2 - in which i have done a manual opacity fade up and down - so the livetype text fades in, over matte color solid in V1. in the exported video -i do not see any of this, all i see is a seemingly random still from somewhere else in the video. i can however hear the audio as it is supposed be.
cant figure out why this is happening. anybody know?
i think the livetype files are 1920 x 1080.
my FCP sequence is 720 p
this has only recently started happening and doesn't seem to be consistent.
im wondering if it has to do with the live type files, or the white solid?…
or the conversion settings above?

Alistair
Earlybird is exporting H264 ... the Key Frames setting is determining the GOP length. This value should really be determined based on the complexity of the video, to my understanding, the actual frame rate has no bearing on it. If you have very complex fast moving content then a low Key Frame rate is advisable to ensure good image quality (although it will adversely affect the filesize) whereas if you have slow moving or static content (like an interview subject) then a higher Key Frame rate will still produce a good image but at a smaler filesize. The default of 24 should be pretty much fine as a catchall starting point.
Earlybird
Corrupted render files (and render references) can be a pain because FCP will use those files and references in place of the original media when building the export. And so it should as it does't want to waste time re-rendering sections that are apparently already rendered. Unfortuantely, as noted, if the render file has gone bad and/or starts referencing the wrong media then you'll get these wierd flashes of completely unexpeced and unwanted footage showing up where it shouldn't be. When you trash those files then QT / FCP will just go back and re-reference the original media ... so it's usually a worthwhile step to take just in case thats the problem. The worse case scenario is that it only that doesn't work and you spend some time unecessarily re-rendering.
As to why these files go bad? That I don't know. Why do Preferences get corrupted? That I don't know either but it definitely happens :-(
Cheers
Andy

I have an exporting problem

I have an exporting problem. I tried to export a little over 2 minute video in 1080p at 29 fps. I know that this setting has worked on all of my previous videos until now. When I tried deleting the files I believed caused the problem, the error still occur. Is there any way to fix this?

rachelb
Thanks for the follow up with further details.
1. Please review the following Adobe document on Complying error for export
"Error compiling movie" during render or export
2. Please confirm error @
Encoding Menus
Encoding Media
Compiling
Actual Burn Process
3. Best to make a copy of the problem project and work from that for the troubleshooting..File Menu/Save a Copy, with different name for copy or copies.
3. Expand the Timeline with the -+ slider above the Timeline to get a better view of the Timeline content.
a. look for obvious flaws in the Timeline tracks content -
b. Explore for less obvious flaws
....Target the transitions...have you dealt with trimmed versus untrimmed clip where the transition is being made?
....Target the audio, looking for gaps
....Target the Timeline in general looking for debris, fragments of clips that you previously deleted
....Check Timeline menu marker placements....no stop marker after the last item on the Timeline
....Check Movie Menu customization area for overlapping buttons, presenting with red frames around the overlapping buttons
c. When you have your disc in the burner tray, what does the burn dialog Quality area show for Space Required and Bitrate.
d. What is the video compression for your .mp4? Have you set a 4:3 project for a 4:3 source or a 16:9 project for a 16:9 source?
Let us start here and then decide what next.
Thank you.
ATR
Add On...If you are working with version 13, have you updated to 13.1 using an opened project's Help Menu/Update? If not, please do so.
Also, determine if it makes a difference to the outcome with or without the Intel HD Graphics 2000 and Higher preference disabled. See
Edit Menu/Preferences/General.

Lightroom 4.1 export problem

Lightroom 4.1 will not export a deleloped image. I have the metadata to new file set to automatic and I get no error mesage. All my new exported files are the same as the original. I need a detailed discription of what boxes need to be checked or unchecked and where to find them. Something as simple as saving changes so that I might use them in another app should not be so difficult- version 2.7 worked fine so what's up with 4.1?

Still no luck... I just purchased a licence for my demo version- I was hoping not to have to do a 1.1Gb download and/or redo my my catalog- is this required?
Date: Sun, 17 Jun 2012 00:37:57 -0600
From: [email protected]
To: [email protected]
Subject: Lightroom 4.1 export problem
    Re: Lightroom 4.1 export problem
    created by ssprengel in Photoshop Lightroom - View the full discussion
Are you saying that LR4 is exporting over the top of your exiting images, or that it is not exporting anything?   To test whether you can export anything, try exporting to a subfolder under your originals, instead of new names in the original images folder, which I think is what you’re saying you’re attempting: On the Export panel, all the way at the top, make sure to set Export To: to Hard Drive. Set the Export Location – Export To: value to Same folder as original photo. Put a checkmark next to Export Location – Put in Subfolder Enter in “output” into the Export Location - Put in Subfolder: textbox. Uncheck the Add to this Catalog unless you really want to include the output of this experimental export in the catalog. Set Export Location - Existing Files to Ask what to do, so LR will indicate if it’s trying to overwrite the same files, again, which it should if the output subfolder is empty. Uncheck the File Naming – Rename To: so the files aren’t renamed. At the bottom change Post-Processing – After Export to Show in Explorer Click the Export button and see what happens. It should do the export then open up Windows Explorer on the output folder you specified.    Before doing any of this, it might be wise to make a screenshot of your current Export settings, the Export To and File Naming sections at least, which you can both post here and use to reset things back from what I’ve specified, above.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4498854#4498854
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4498854#4498854. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

PDF Export Problems

bei using interactive functions in inDesign CS5 and then exporting to pdf, I am able to see exactly everithing I wanted in AcrobatPro, but not in Adobe Reader. What can I do, so that anybody who uses Reader can see it too? Anybody knows?? Thanks

Re: PDF Export Problems
created by Jeffrey_Smith <http://forums.adobe.com/people/Jeffrey_Smith> in
InDesign - View the full discussion
<http://forums.adobe.com/message/4271659#4271659>
What is it that you can not see in Reader: button behavior, rollover effect,
hyperlink, etc. ?
Wow, I am impressed about the fast reaction:-)
The interactive function I am using (unfortunately in German inDesign) is
"button" > Action: by letting go (?). It's a file with some 100 pages and
some 500 links. Exported as pdf interactive...
The effect In AcrobatPro: when clicking on the thumbnail the original
picture shows in a separate window without closing the original file. After
closing the new window, I could continue in the multipage file...
This is not happening in Adobe Reader. It says: the link was not found, and
here and then, when shown in e new window, the multipage file is closed...
Hope this helps..
Thanks Jaro
PS
I did reply on the forum directly, but no success. There trying via mail.
Hope it works:-)

Sharing/Exporting Problem

Similar Messages

Maybe you are looking for