Sharing files between Leopard and Panther

I have two iMac's running Panther (10.3.9) that are networked wirelessly and living happy together.
Today I wanted to add a new iMac that his running Leopard into the network that is also wireless. I have no problem accessing the internet using the wireless abilities the new iMac has.
In Sharing in Finder I enabled File Sharing.
Back in Finder under Places I found the two other networked computers.
When I click on either of them I cannot view/access the contents of either computer. All I see is Dropbox.
What can I do so that I can view the contents of either of the Panther computers on the new iMac running Leopard?
What do I do on the Panther computers so I can access the folders/files on the Leopard computer?
Thank you for looking.

My mistake.
Message was edited by: brainwave1989

Similar Messages

Sharing files between users and macs

My husband and I share an iMac. I have a MBA for traveling and my husband a PC laptop (though he rarely uses for private stuff). We both have iPhones.
We are looking for a way to:
- Share our photos (we don't use iPhoto) and some files. We would like to have this in one shared folder, that we can access from both accounts in the iMac, the MBA and ideally (though not a must) the PC and iPhones. We would both need to have admin rights to edit documents, etc.
- Have access to all the information in my account on the iMac from the MBA. Ideally, same thing for his and the PC.
- Have access to all the data remotely when traveling.
- Have all the data backed up locally (we already have a cloud backup, but we'd like to have a local backup too as it's easier and quicker to access)
We have read a lot about configuration, NAS, time capsule... but we get more and more confused, as we are obviously no tech experts.
Dropbox is not our preferred choice. We already have a cloud backup system. We'd rather have the files stored and accessed locally for everyday use.
Using a NAS to store shared folders and backup the rest sounds good, but they either seem very complicated to set up, or they have mixed reviews in terms of stability, especially to access files remotely.
Timecapsule seems easier and more straightforward, but I'm not sure it would solve the "sharing files between users and macs with admin rights"? It seems to be more focused on backing up the main drive and then providing access to the backed up files. (Though I might be completely mistaken!)
We just can't manage to have one shared folder between both accounts in the iMac. We need to grant admin rights document by document. We don't manage to make it work automatically so we both have one folder to access with full rights for all the contents inside it. And this seems to me like something that should easily be done...?
Any help, advice, proposals... would be greatly appreciated!!!

Move any file you want to the other user to access to the Shared Folder. Anything you put in that folder is available to all users.
The shared folder is here:
Macintosh HD > Users > Shared

Sharing files between mac and PC's

I have an iMac running 10.4.8 and 2 PC's running XP home edition. I am trying to share files between them. They are networked through a router. The mac can see and connect to both of the PC's and I can open files on the PC's from the mac. The PC's can connect to each other and open files. The problem I'm having is connecting to the mac from either of the PC's. They all have the same workgroup name. I have windows file sharing on. Is there something else that needs to be done so the PC's can see and connect to the mac?

Hi Pat-999,
To set up a link between Windows XP and the Mac do the following:
1) Open "My Network Places" on the Windows computer.
2) Double click on "Add a network place".
3) A setup wizard will appear. Click next and choose the option to specify a network site, etc. Click Next.
4) Open the System Preferences on your Mac. Choose Sharing. Under the Services tab, turn on the check box for "Windows Sharing". Click on the Accounts button and activate your account. If sharing hasn't started by itself, click the Start button. Write down the address where it says "Windows users can access your computer at...". It would be something like \\192.168.0.122\username
5) Enter that address in the wizard at the Windows computer and click Next.
6) It will take a few minutes for the connection to show up. When it does, give the connection a name and save it.
In the future, you then just need to have Windows sharing on at your Mac and double click the connection you saved to connect. When you do, a dialogue box will appear asking for the Mac users' name and password to connect. Put in your long name (the same one that appears any time the Mac asks for your password) and the password. A folder will open on the Windows desktop.
Initially, it will only let you set the connection up for your entire Mac account. So you will see all of the folders within that account. If you want to confine the connection to the drop box, then run the connection wizard again. This time, on the page where you enter the Mac address, you'll have a drop down menu of all of the folders in your account. Choose username\Public\Drop Box and save that connection. Delete the previous one. Now when you connect (using the same long name and password), the folder on the Windows desktop will be confined to the Drop Box folder of your account.

Sharing Files between Mac and Windows XP PC

I have an small office with three computers. There is a new Mac that basically acts as the server. There is a shared folder on the computer. The other 2 computers are PCs. All permissions have been set on the Mac. The other 2 users are set as Administrators on the Mac and have the ability to Read and Write. The other 2 users can access the files, but they are not able to make any changes. The shared folder has may sub folders. Any ideas?

huh, i used migration assistant to create a user with all my old data. now i have 2 users. anyway, i was putting the old data i wanted (i plan to wipe out the old user) into the shared folder...and it was working fine. all of a sudden, i put files into the shared folder, and when i log in as the new user, i can't use the file. won't give me access.
i've enabled file sharing, the files and folders are marked as shared, and well...it seems like file sharing is broken.
...ideas?

Sharing Files between Mac and PC over a Network

Greetings,
I have recently made the switch to the Mac, and I have been so pleased with it ever since! I am getting married soon and my wife-to-be has a Windows XP desktop machine. I have been reading up on the different options on sharing files, and I want to ask if someone with experience can confirm what I think I have discovered.
1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
Thank you for any help that you might offer.

1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
You don't need Macdrive for sharing files over the network, macdrive is only needed for a PC to read a Mac formatted Hard drive that is directly connected to a PC i.e Firewire Drive.
2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
Yes you can write to a windows sharepoint on a mac this would be limited to their home folder unless you setup other permissions.
To setup windows sharepoints your best using a shareware utility called sharepoints
Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
It does not matter what format hte pc drives are if your sharing over a network you only need to know about formatted drives if they are directly connected to the computer i.e firewire, or usb drives.

Sharing files between paralells and Mac OS X

Hi,
I read that you can drag and drop files between Paralells windows xp and Mac OS X.
don't know what I am doing wrong but this is not working for me. For one thing when inside the XP window I can't even move the mouse to my OS X desktop.
Is there a way to share folders?
Thanks

I believe you have to install the Parallel Tools for Windows. Do this when you first launch your new Windows virtual session.
Also make sure you have the latest Parallels version. It really is as easy as dragging and dropping files from one window to the other once all is configured.

DVD Sharing issue between Leopard and Snow Leopard

Today started out pretty straight forward.. I was going to finally upgrade to Snow Leopard. Turns out I have a bad optical drive (only reads CD's not DVD's). No problem... I will share the drive off my husbands laptop which is already running snow leopard. Well 4 hours and a whole lot of swearing later... it was still not working. The drive would not mount under devices and it seemed no amount of coaxing would work. I also was not getting the option of choosing a network after I rebooted with the option key (maybe that is MacBook Air only???) when I tried the remote install. I even went so far as to try to share the DVD drive of a windows vista system I have for work.
As a last ditch effort I threw the disk in an old PPC iMac also running 10.5.8 and Viola!!!!!! the disk appeared as it should and all seems to be well for an install. I post this for anyone else who finds themselves in this position... stop banging your head against a wall if the disk is not mounting with DVD/CD sharing. Try to find another leopard machine to use or use a different technique all together. (target disk mode, making an image on usb.. I've seen them, never tried them). Hopefully you won't lose hours tilting and windmills like I did.

This solved my problem.
In Leopard in System Preferences I opened Security. In the Firewall tab I clicked on "Set access for specific services and applications"
Once I had File Sharing (AFP, SMB) added I was able to access my Macpro on my PowerBook G4.

Problem with sharing files between mac and pc

hi i have been having an issue with file sharing between my mac and pc. my pc running windows 7 can connect to my two macs running mavericks (mbp and mini) but i cannot connect to the pc from my macs. i have file sharing using smb setup on my macs as well as the workgroup setup. i can see the pc in my finder shared tab but when i enter the username and password it loads like its trying to connect and then says cannot connect or sometimes makes you re enter the password and still nothing. i also tired connecting through finder go tab and connect to server but when i type in my ip it asks to input the user and password but wont accept it it just shakes and deletes the text in the user and pass fields. on my pc i have file sharing enabled and like i said i can access my macs no problem. i will give a quick guide of how i try to connect
Pc name is RAID-PC
my admin account name is RAID
pass is: dapice (not actual)
ip address 192.168.2.20
when I click on the raid pc under the shared tab in finder i put as the user RAID and pass dapice ....doesn't work
under the finder go tab connect to server i put smb://192.168.2.20 then push the + and then connect enter RAID as user and dapice as pass... unsuccessful
i have tired reinstalling windows 7 didn't help i tired installing windows vista and also didn't work
i have reinstalled mavericks and that also didnt work
i have spend HOURS looking for the answer and trying all different this with no success any help will be appreciated

when i go to enter the username and pass it just shakes and makes me re enter
here is some screen shots from what happends
that is for trying to connect through shared tab and thi is through connect to server
after i push connect it shakes and stays the same

Shared files between Vista and Windows 8.1

I have a laptop with windows 8.1 on it and a desktop with Vista. The desktop can access the files on the laptop, but the laptop cannot access the desktop files. The network shows the desktop, but says it is cannot access it. Is
there a setting in windows 8.1 that I am missing?

Hi,
Please make sure that you have permission to access Windows Vista computer, and the share from Windows Vista is for public.
Then, please check following settings:
Whether these two computers are in the same workgroup.
Try to turn off the firewall of Windows Vista to check the results.
Check whether the network discovery of both computers is turned on.
Check following ports are allowed in Firewall: UDP 3702, TCP 5357, TCP 5358
If the key restrictanonymoussam under HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa was set to 1 or 2, please change it to 0.
For other detailed settings, please refer to this link:
File and Printer Sharing in Windows Vista
http://technet.microsoft.com/en-us/library/bb727037.aspx
Hope these could be helpful.
Kate Li
TechNet Community Support

Sharing files between mac and windows

Hello, I have recently purchased a new mac computer and I would like to transfer files from my old windows computer onto this new one and vice versa. I have tried using an external hard drive to do this, but I found that it can only be formatted to one OS at one time. Does anybody have any ideas of how I can accomplish this? Thank you so much for your help everyone!

I'm not clear as to the current format of the drive. Since you say it is working with MacDrive I am assuming it is currently NTFS. You also say this is for a "new computer" so is this really a Leopard OS computer, making this a Leopard OS question? There's differences in the capabilities of the different systems.
As for MacDrive, if it works and it's the only program then you'll have to pay for it. I'd say if you're just using it this once for this one application you could probably buy a used drive for $50 to allow you to clear some files off the one you want to use and reformat it. Drives formatted to FAT32 can hold files up to 4GB in size and work with both Mac and Windows. Unless this is for video I don't see a severe restriction to reformatting to FAT32 and using that.

Sharing Files between PC and Mac

I have a PC running Windows Vista, and a new Macbook. I have set folders on my PC to share with other computers on my network, and I have shared my printer as well on this same network. I can connect to my PC from my Mac using the "Connect to Server" button in the Finder, and I can easily take files from my PC and copy them onto my Mac.
The thing is, I have a few files that I downloaded from the internet saved onto my Mac, and I have to put them onto my Windows PC, but whenever I open a finder window into my Vista shared folder, I can see all the things that are in the folder, but when I try to put files from my Mac into the folder, it says (on the mac) that I need to provide Administrator permissions for this. I don't ever get a chance to provide this permission, and it just says "Access is denied".
What can I do to copy the files from my Mac to my PC? Is there some way of getting the Mac to ask me for a password or something on the PC? I have an administrator account on there as well, so it isn't a problem in that respect!
Thanks

Does this article contain anything useful?
(32080)

Sharing files between pc and mac using ipod ?

I have a PC at work and Mac at home. My work email only allows 10MB enclosures and my work files are often 100MB.
I want to take the files and not the processor home to work on. Can i do this using my colour iPod ?
What i did is format the iPod on the PC and then fill it and sync it with my Mac at home. I did this because i believed that whilst a Mac can read PC file structures the reverse is not true.
Problem is that i get an error message from iTunes each time when it tries to sync up. So the sync seems to abort rather than complete.
Anyone any ideas/experience that may be relevant ?

btw the error is
"Attempting to copy to the disk "Guy_s iPod" failed. The file name was invalid."
and then it says
"The iPod "Guy's iPod II" cannot be updated. The disk could not be read or written to."

Sharing linked files between mac and pc

Dear Community and AI Support,
My team is trying to share AI files between Macs and PCs. That works fine until we have Linked assets. Once we have linked assets, AI either forgets to, or is unable to, let us relink more than one of the linked files. We can't edit the links or even delete them. The linked files are just ignored, leaving the file half empty.
We've tried hacking the paths directly in the .AI file, hoping to eventually write a perl script to help us switch back and forth. but no luck. We assume there is a checksum or crc code or hash, etc..., as AI won't even try to open the file after that.
But to clarify the issue. here is an example of the Mac and PC links we need to switch between using an excerpt from the AI file. These are valid, working directories on both platforms.
Mac flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>/T/source/stories/00002/characters/puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Win flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>T:\source\stories\00002\characters\puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Thanks! :]
Chris

ooohhhhh very interesting. I did a find and replace on all the strings, but no dice. I didn't think to look at those types of data. But now that you have mentioned it, perhaps I'll do a diff on the same file saved on both platforms to see what has been changed. Should have already thought of it, but your note has made me check my assumptions.

In limbo between Leopard and Snow Leopard - stupidly didn't back up

I've got an old-school black MacBook, about four years old now. I never cared enough to upgrade it to Snow Leopard, but now I want Lion. So, I borrowed my parents' five-license Snow Leopard install disc and started off on the journey to upgrade to Snow Leopard, download the App Store update, then download and install Lion. I didn't get far.
First, let me say that I didn't back up my hard drive. Like an idiot. Yes, I know it was stupid, so there's no need to say anything. My previous installs (a few clean re-installs) have gone without a hitch, so I figured I'd trust Apple and just run the installation without backing up. Dumb.
The Snow Leopard installation started fine, but was interrupted when the installer said the install failed. Restart, try again. Booting from the install DVD, things seemed to be going fine a second time around -- picked my language, got to the install set-up screen, picked Macintosh HD as my installation drive. And then things stopped working. The installer said my HD could not be written to and that it needed repair. So I went to Disk Utility to try that. Repair Disk wasn't available, so I clicked Verify Disk. That got interrupted when it said the disk needed to be repaired, after which the Repair Disk button was clickable. Tried to repair, but apparently my HD is screwed beyond the capabilities of Disk Utility.
I tried to reboot the MacBook from the HD, which Disk Utility said still had Leopard running on it. The computer wouldn't boot up. Safe Boot didn't work. So, without any other real options, I thought I'd try my luck by just trying the install again. Booted up from the install DVD, and ran into the same issues. Didn't magically fix itself, of course. So my MacBook is stuck in limbo between Leopard and Snow Leopard, won't boot from the HD and won't let me repair the disk when booted from the DVD. What do I do?
I plan to try a couple third-party disk-utility programs tomorrow (8/25/11) to recover the files on my HD. There's not much I care about on there (just some iPhone photos and my resume, really), so doing a clean wipe of the HD and installing Snow Leopard is an option. But I'd of course rather be able to recover my personal files. Is this possible at this point?
Another question I have regarding a clean wipe: If I end up having to clean off the HD and lose all my data, I'll lose the iTunes configuration for my iPhone. Will iTunes be able to import my apps and settings from my phone if I plug it in?
Thank you very much.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system?

Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system? When I try to connect from my iMac I get a window that says "The version of the server you are trying to connect to is not supported." Is there a work-around to this problem or is it just not possible? It would be largly appriciated for a solutin beings my business is a small town newspaper, and we have some important files on the older computer that need to be acessed daily.

Actually to share files between OS 8-9 and OS X, all versions, is quite easy from what I read. Look here for some details.
http://reviews.cnet.com/8301-13727_7-20003464-263.html
And here.
https://www.google.com/search?q=file+sharing+Mac+OS+9.x&oq=file+sharing+Mac+OS+9 .x&aqs=chrome..69i57.20706j0j1&sourceid=chrome&ie=UTF-8
Or since both OS 9 and OS X can do SMB Windows sharing you could use that protocol to share files from one to the other.
Doesn't really matter what OS you are using. Mac OS/OS X shar files with Windows computers of all types and versions of Windows so the same applies for the different versions of Mac OS/OS X.
Each Operating System takes care of reading and writing files to there respective file formats of the hard drives so that does not have to be the same. They both just have to be able to do Ethernet with the same files sharing protocol.

Sharing files between Leopard and Panther

Similar Messages

Maybe you are looking for